Gebruiksaanwijzing /service van het product 3104s van de fabrikant Carrier Access
Ga naar pagina of 34
Adit 3104 Q UICK S TART G UIDE Part Number: 002- 0219-0410 Product Release: 1.6 September 2007.
Copyright 2007 Carrier Access Corporation. All rig hts reserved. The information presented in this manual is subject t o change without notice an d does not represent a commitm ent on the part of Carrier Access Corporation. The hardware and softwa re described herein are furnished under a license or non- disclosure agreement.
Q UICK S TART G UIDE Quick Start In this Guide Unpacking and Inspection Installation Environment User Safety Installation - Compliant Installation - Ferrite Beads - Wall Mounting - Rac.
4 Adit 3104 - Relea se 1.6 Quick Start Unpacking and Inspection Unpacking and Inspection W ARNING! O BSERV E PRECAUTIONS FO R HANDLING ELECT ROSTATIC DEVICES . 1. Inspect containers for damag e during shipment . Report any damage to the freight carrier for possible insurance claims.
Adit 3104 - Release 1.6 5 Quick Start User Safety User Safety CAUTION! W HEN USING YOUR TEL EPHONE EQUIPMENT , BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE , ELECTRIC .
6 Adit 3104 - Relea se 1.6 Quick Start Installatio n Compliant Installation NOTE: It is important the DS1/E1 Network Interface Cables are secured separately from the power and Signal Cables. 1. Inspect the unit. 2. Mount the unit, see Wall Mounting on page 7, or Rack Mounting (Optional Feature) on page 8 for detailed instructions.
Adit 3104 - Release 1.6 7 Quick Start Installation Wall Mounting Before beginning the mounting process , verify that the installation area is a stable environment, clean and free from extremes of temperature, shock, vibration and EMI. See Installation Environment on page 4.
8 Adit 3104 - Relea se 1.6 Quick Start Installatio n Rack Mounting (Optional Feature) NOTE: Rack mounting kits are available for both 19 and 23 inch racks. 1 Rack Unit (RU) of spacing is required above the Adit 3000 in the Rack Mo unt Unit. To rack mount the Adit 3000, fo llow the instructions below: 1.
Adit 3104 - Release 1.6 9 Quick Start Installation 3. Place the Adit 3000 on the Tray Slide and a ttach with the 4 screws removed in step 2. 4. Slide the assembled piece (Adit 3000 and Tray Slide) onto th e installed Rack Mounting Tray. 5. Secure the Tray Slide to the Rack Mounting Tray with the att ached screws on the Tray Slide.
10 Adit 3104 - Relea se 1.6 Quick Start Installatio n Adit 3104, 3200 and 3400 Battery Backup Note: This is an Optional Feature. The Adit 3104, 320 0 and 3400 Battery Backup (P/N 73 0-0132), is a wall-moun t battery backup unit to provide up to 8 hours battery backup.
Adit 3104 - Release 1.6 11 Quick Start Chassis Overview Chassis Overview (1) 10/100Ba se-T Ethernet (WAN) (4) 10/100Base- T Ethernet (LAN) Tip & Ring Telco Connector Alarm Status Reset RS-232 Mana.
12 Adit 3104 - Relea se 1.6 Quick Start Interface Connectors Interface Connectors Front of Adit z (1) DS1 WAN port (RJ-48C). Note: E1 will be in a future release.
Adit 3104 - Release 1.6 13 Quick Start Interface Connectors Power The Adit 3000 is powered by a limited -48 VDC Po wer source. The following options are available: z AC/DC Converter z Battery Backup module AC/DC Converter An AC/DC Converter generates 48VDC from any worldwide AC power source.
14 Adit 3104 - Relea se 1.6 Quick Start Interface Connectors 25-Pair Telco Connector Tip and Ring Analog Interfaces equipped with standard 25-pair Telco Connectors (female) for connection to key systems, fa x machines, modems, and PBXs. Circuit connections are made at the 25-pair telco connectors.
Adit 3104 - Release 1.6 15 Quick Start Interface Connectors RS-232 Craft Port (Female DB-9) The RS-232 craft port connector (female) is for co nnection to an external PC or Hayes-compatible modem for local or remote conf iguration, management , and performance monitoring using t he Adit 3000 Command Line Interface (CLI).
16 Adit 3104 - Relea se 1.6 Quick Start Interface Connectors DS1/E1 Connection Ports Each DS1/E1 connec tion port is equipped with a standard RJ-4 8C (female) on the Adit 3000 unit.
Adit 3104 - Release 1.6 17 Quick Start Reset Button 10/100Base-TX Ethernet The 10/100Base-TX Ethernet (female) po rts provide connectivity for Router WAN and/or LAN ports and for manage ment connection via Telnet and/or SNMP to a Network Management System.
18 Adit 3104 - Relea se 1.6 Quick Start Alarm/Status LEDs Alarm/Status LEDs LED State Description Critical Off No critical alarms present Red Critical alarms present. Critical alarms include: user-configured manor envi ronmental inputs. Major Off No major alarms present Red Major alarm present.
Adit 3104 - Release 1.6 19 Quick Start Web-Based Management Web-Based Management The web-based mana gement interface allows you to control various system parameters. The interface is accessed through a web browser. To access the management console: NOTE: The following assumes that you have connected the PC to the LAN port of the Adit 3104.
20 Adit 3104 - Relea se 1.6 Quick Start Setting up a CLI Connecti on Setting up a CLI Connection A CLI connection will require t he LAN or WAN IP ad dress of the unit.
Adit 3104 - Release 1.6 21 Quick Start Log in Log in After successful connection, via telnet or HyperT erm, the user must login. Default Logins are: Login: admin Password: admin123 After successful login the prompt will be displayed as follows: Adit 3104> NOTE: It is recommended that you cha nge your password from the default.
22 Adit 3104 - Relea se 1.6 Quick Start Key Enabled Software Features Key Enabled Software Features The Adit 3104 has additional features that are not pr ovided on the base system. These features can be purchased with the product or added later as needed .
Adit 3104 - Release 1.6 23 Quick Start Basic Configuration Basic Configuration The following configuration is divided into logical sections, where each section configures an additional function. The first must be configured before the second and so forth, ho wever, you may stop at any section and not add the following feat ure.
24 Adit 3104 - Relea se 1.6 Quick Start Basic Configuration Restore Factory Defaults If the unit is not out-of-the-box, you may want to verify t hat the unit is set to defaults. Note: t his will reset the IP address back to th e default setting of 192.
Adit 3104 - Release 1.6 25 Quick Start Basic Configuration Modify Default Admin User For security purposes it is recommended that the Ad ministrator User be change d from the default settings. Modify the Administrator User in the web-browser: z Select Advanced from the Navigation bar z Select Users icon z Select Administrato r, to open the profile.
26 Adit 3104 - Relea se 1.6 Quick Start Basic Configuration z Modify the User info rmation, and select OK to save. It is important t o note that you need to have a minimum of on e user with Administrative Privileges . For users with other access levels, add a New Use r .
Adit 3104 - Release 1.6 27 Quick Start Basic Configuration Configure Ethernet WAN Interface In the web-browser: 1. Select Network Connections from the Navigation bar. 2. It is recommended that you disable/delete the Serial1 port. 3. Select (click) Ethernet 2 (WAN Ethernet) connection to configure.
28 Adit 3104 - Relea se 1.6 Quick Start Basic Configuration 6. Set Internet Protocol to Obtain an IP Address Automatically , from the pulldown menu. This will enable the Adit 3104 as a DHCP Client. Leave the other fields to t heir default settings. 7.
Adit 3104 - Release 1.6 29 Quick Start Basic Configuration Configure Serial1 as WAN In the web-browser: 1. Select Network Connections from the Navigation bar. 2. Select Serial1 . 3. Select Settings button. 4. Set Network to WAN . 5. Select Apply to apply the new settings.
30 Adit 3104 - Relea se 1.6 Quick Start Basic Configuration 6. Select the Enable button..
Adit 3104 - Release 1.6 31 Quick Start Basic Configuration Configure the Adit 3104 as a SIP Line Gateway In the web-browser: 1. Select Voice Over IP from the Navigation bar. 2. Select Use SIP Proxy . 3. Enter Softswitch IP Address, User name and Password.
32 Adit 3104 - Relea se 1.6 Quick Start Basic Configuration 6. Select the Phone Settings tab. 7. Select the Action icon on line #1 to edit..
Adit 3104 - Release 1.6 33 Quick Start Basic Configuration 8. Enter a telephone number in the User ID field and select OK . 9. Repeat this step for each line you would lik e to have register with your Softswitch.
34 Adit 3104 - Relea se 1.6 Quick Start Basic Configuration.
Een belangrijk punt na aankoop van elk apparaat Carrier Access 3104s (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Carrier Access 3104s heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Carrier Access 3104s vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Carrier Access 3104s leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Carrier Access 3104s krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Carrier Access 3104s bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Carrier Access 3104s kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Carrier Access 3104s . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
