Gebruiksaanwijzing /service van het product 2001 van de fabrikant Chevrolet
Ga naar pagina of 388
.
1-800-CHEV-USA ( For vehicles purchased in Canada, call 1-800-268-6800 ) that provides in an emergency: 1-800-CHEV-USA ( For vehicles purchased in Canada, call 1-800-268-6800 ) Free lockout assistance.
2001 Chevrolet Astro Owner's Manual Litho in U.S.A. Part Number C2110 A First Edition © Copyright General Motors Corporation 2000 All Rights Reserved i.
ii Table of Contents Windows Keys and Door Locks Keyless Entry System (Option) Hatch Automatic Transmission All-Wheel Drive (Option) Parking Brake Tilt Wheel (If Equipped) Turn Signal/Multifunction Le.
Comfort Controls and Audio Systems Your Driving and the Road Table of Contents (cont'd) Your Driving, the Road and Your Vehicle Defensive Driving Drunken Driving Control of a Vehicle Braking Stee.
iv Fuel Checking Fluids and Lubricants Engine Air Cleaner/Filter Brakes Bulb Replacement Windshield Wiper Blade Replacement Tires and Wheels Appearance Care Electrical System/Fuses and Circuit Breaker.
v Table of Contents (cont'd) Customer Assistance Information In the Index you will find an alphabetical listing of almost every subject in this manual.
vi GENERAL MOTORS, GM, the GM Emblem, CHEVROLET , the CHEVROLET Emblem and the name ASTRO are registered trademarks of General Motors Corporation. This manual includes the latest information at the time it was printed. W e reserve the right to make changes after that time without further notice.
vii How to Use this Manual Many people read their owne r ’ s manual from beginning to end when they first receive their new vehicle. If you do this, it will help you learn about the features and controls for your vehicle. In this manual, you’ll find that pictures and words work together to explain things quickl y .
viii Y ou will also find a circle with a slash through it in this book. This safety symbol means “Don’t,” “Don’t do this” or “Don’ t let this happen.” V ehicle Damage W arnings Also, in this book you will find these notices: NOTICE: These mean there is something that could damage your vehicle.
ix For example, these symbols are used on an original battery: CAUTION POSSIBLE INJUR Y PROTECT EYES BY SHIELDING CAUSTIC BA TTERY ACID COULD CAUSE BURNS A VOID SP ARKS OR FLAMES SP ARK OR FLAME COULD.
x Model Reference This manual covers these models: Cargo V an Cargo V an.
For a More Detailed Look at What's Under the Hood See Section 6 Service Station Guide Oil Viscosity Engine Oil See Section 6 Engine Oil Dipstick See Section 6 Fuel Use unleaded only.
1- 1-1 Section 1 Seats and Restraint Systems Here you’ll find information about the seats in your vehicle and how to use your safety belts properly .
1-2 Seats and Seat Controls This section tells you about the seats -- how to adjust them, take them out and put them back in. It also tells you about bucket and bench seats, power seats and head restraints. Manual Front Seats CAUTION: Y ou can lose control of the vehicle if you try to adjust a manual driver’s seat while the vehicle is moving.
1-3 Manual Lumbar Support (If Equipped) If you have this feature, there will be a knob located on the inboard side of the driver ’ s and passenger’ s bucket seats. T urn the knob toward the front of the vehicle to increase lumbar support. T urn the knob toward the rear of the vehicle to decrease lumbar support.
1-4 Reclining Seatbacks There is a lever located on the inside of the seat to adjust the seatback. Y ou can adjust the seatback by lifting the lever and leaning back. Release the lever to lock the seatback where you want it. Pull up on the lever , lean forward and the seat will go to an upright position.
1-5 CAUTION: Sitting in a reclined position when your vehicle is in motion can be dangerous. Even if you buckle up, your safety belts can’t do their job when you’re r eclined like this. The shoulder belt can’t do its job because it won’t be against your body .
1-6 Seatback Latches The seatback lever is located on the right rear of your seat. T o fold your bench seatback forward, pull up on the latch release lever while pulling the seatback toward the rear of the vehicle. After the latch has been released, push the seatback toward the front of the vehicle until it locks into place.
1-7 Rear Seats Bucket Seats (If Equipped) Y ou may have rear bucket seats with an adjustment release bar located at the front of the seats. These seats can be adjusted forward or rearward with the release bar . Pull the release bar up to release the seat bottom and slide the seat where you want it.
1-8 T o adjust your seatback, pull up on the lever located on the outboard side of the seat cushion. T o raise or lower the center console, press the button located between the beverage holders. Sit in the center seating position only when the console is in an upright and locked position.
1-9 Removing the Rear Seats T o remove the rear seats, do the following: 1. If you are removing the center seat, remove the right lap - shoulder belt. T o do this, press the tip of a key into the release hole of the safety belt attachment while pulling up on the safety belt.
1-10 5. Lift up on the left and the right seat release levers at the same time. The latches are near the floor on the rear legs of the seat. 6. Lift up on the rear of the seat to remove the seat assembly from the rear latch pins. Then, pull back and lift the seat out of the vehicle.
1-1 1 Replacing the Rear Seats 1. Lower the seat into position. Make sure the front retainers are hooked onto the anchor pins. 2. Pull the seat down to latch the rear retainers. Make sure the seat is locked in by pulling up and down on the seat. CAUTION: A seat that isn’t locked into place properly can move around in a collision or sudden stop.
1-12 T o raise the seatback, do the following: 1. Unlock the seatback latch by pushing up on the latch release lever at the right rear of the seat, while pushing down on the upper edge of the seatback. 2. Move the seatback into the upright position. Make sure the seatback is locked when it is back in the upright position.
1-13 Safety Belts: They’re for Everyone This part of the manual tells you how to use safety belts properly . It also tells you some things you should not do with safety belts. And it explains the air bag system. CAUTION: Don’t let anyone ride where he or she can’t wear a safety belt properly .
1-14 Y ou never know if you’ll be in a crash. If you do have a crash, you don’t know if it will be a bad one. A few crashes are mild, and some crashes can be so serious that even buckled up a person wouldn’t survive. But most crashes are in between.
1-15 Put someone on it. Get it up to speed. Then stop the vehicle. The rider doesn’t stop..
1-16 The person keeps going until stopped by something. In a real vehicle, it could be the windshield ... or the instrument panel ....
1-17 or the safety belts! W ith safety belts, you slow down as the vehicle does. Y ou get more time to stop. Y ou stop over more distance, and your strongest bones take the forces.
1-18 Q: If I’m a good driver , and I never drive far fr om home, why should I wear safety belts? A: Y ou may be an excellent driver , but if you’re in an accident -- even one that isn’t your fault -- you and your passengers can be hurt. Being a good driver doesn’t protect you from things beyond your control, such as bad drivers.
1-19 3. Pick up the latch plate and pull the belt across you. Don’t let it get twisted. 4. Push the latch plate into the buckle until it clicks. Pull up on the latch plate to make sure it is secure. If the belt isn’t long enough, see “Safety Belt Extender” at the end of this section.
1-20 Shoulder Belt Height Adjuster Before you begin to drive, move the shoulder belt adjuster to the height that is right for you. T o move it down, push in at the top of the arrows and move the height adjuster to the desired position. Y ou can move the adjuster up just by pushing up on the shoulder belt guide.
1-21 Q: What’ s wrong with this? A: The shoulder belt is too loose. It won’t give nearly as much protection this way . CAUTION: Y ou can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury .
1-22 Q: What’ s wrong with this? A: The belt is buckled in the wrong place. CAUTION: Y ou can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen. The belt forces would be ther e, not at the pelvic bones.
1-23 Q: What’ s wrong with this? A: The belt is over an armrest. CAUTION: Y ou can be seriously injured if your belt goes over an armrest like this. The belt would be much too high.
1-24 Q: What’ s wrong with this? A: The shoulder belt is worn under the arm. It should be worn over the shoulder at all times. CAUTION: Y ou can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and neck injury .
1-25 Q: What’ s wrong with this? A: The belt is twisted across the body . CAUTION: Y ou can be seriously injured by a twisted belt. In a crash, you wouldn’t have the full width of the belt to spread impact for ces. If a belt is twisted, make it straight so it can work properly , or ask your dealer to fix it.
1-26 T o unlatch the belt, just push the button on the buckle. The belt should go back out of the way . Before you close the door , be sure the belt is out of the way . If you slam the door on it, you can damage both the belt and your vehicle. Safety Belt Use During Pregnancy Safety belts work for everyone, including pregnant women.
1-27 The best way to protect the fetus is to protect the mother . When a safety belt is worn properly , it’ s more likely that the fetus won’t be hurt in a crash. For pregnant women, as for anyone, the key to making safety belts effective is wearing them properly .
1-28 CAUTION: Air bags inflate with great force, faster than the blink of an eye. If you’re too close to an inflating air bag, as you would be if you were leaning forward, it could seriously injure you. Safety belts help keep you in position before and during a crash.
1-29 How the Air Bag System W orks Where ar e the air bags? The driver ’ s air bag is in the middle of the steering wheel. The right front passenger ’ s air bag is in the instrument panel on the passenger ’ s side.
1-30 CAUTION: If something is between an occupant and an air bag, the bag might not inflate properly or it might force the object into that person. The path of an inflating air bag must be kept clear .
1-31 What makes an air bag inflate? In an impact of sufficient severity , the air bag sensing system detects that the vehicle is in a crash. The sensing system triggers a release of gas from the inflator , which inflates the air bag.
1-32 Air bags are designed to inflate only once. After they inflate, you’ll need some new parts for your air bag system. If you don’t get them, the air bag system won’t be there to help protect you in another crash. A new system will include air bag modules and possibly other parts.
1-33 Servicing Y our Air Bag-Equipped V ehicle Air bags affect how your vehicle should be serviced. There are parts of the air bag system in several places around your vehicle. Y ou don’t want the system to inflate while someone is working on your vehicle.
1-34 Rear Seat Passengers It’ s very important for rear seat passengers to buckle up! Accident statistics show that unbelted people in the rear seat are hurt more often in crashes than those who are wearing safety belts. Rear passengers who aren’t safety belted can be thrown out of the vehicle in a crash.
1-35 Lap - Shoulder Belt These positions have lap - shoulder belts. Here’ s how to wear one properly . 1. Pick up the latch plate and pull the belt across you.
1-36 4. T o make the lap part tight, pull down on the buckle end of the belt as you pull up on the shoulder part. The lap part of the belt should be worn low and snug on the hips, just touching the thighs. In a crash, this applies force to the strong pelvic bones.
1-37 CAUTION: Y ou can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury . The shoulder belt should fit against your body . T o unlatch the belt, just push the button on the buckle.
1-38 Rear Safety Belt Comfort Guides for Children and Small Adults Y our vehicle may have rear shoulder belt comfort guides. This feature will provide added safety belt comfort for older children who have outgrown booster seats and for small adults.
1-39 2. Slide the guide under and past the belt. The elastic cord must be under the belt. Then, place the guide over the belt, and insert the two edges of the belt into the slots of the guide. 3. Be sure that the belt is not twisted and it lies flat. The elastic cord must be under the belt and the guide on top.
1-40 4. Buckle, position and release the safety belt as described in “Rear Seat Outside Passenger Positions” earlier in this section. Make sure that the shoulder belt crosses the shoulder . T o remove and store the comfort guides, squeeze the belt edges together so that you can take them out from the guides.
1-41 When you sit in a center seating position, you have a lap safety belt, which has no retractor . T o make the belt longer , tilt the latch plate and pull it along the belt. T o make the belt shorter , pull its free end as shown until the belt is snug.
1-42 Children Everyone in a vehicle needs protection! This includes infants and all other children. Neither the distance traveled nor the age and size of the traveler changes the need, for everyone, to use safety restraints.
1-43 CAUTION: (Continued) For example, in a crash at only 25 mph (40 km/h), a 12 - lb. (5.5 kg) baby will suddenly become a 240 - lb. (1 10 kg) force on a person’ s arms. A baby should be secured in an appropriate restraint. CAUTION: Children who ar e up against, or very close to, any air bag when it inflates can be seriously injured or killed.
1-44 Q: What are the differ ent types of add - on child restraints? A: Add - on child restraints, which are purchased by the vehicle’ s owner, are available in four basic types.
1-45 CAUTION: The body structure of a young child is quite unlike that of an adult or older child, for whom the safety belts are designed. A young child’ s hip bones are still so small that vehicle’ s regular safety belt may not remain low on the hip bones, as it should.
1-46 CAUTION: Newborn infants need complete support, including support for the head and neck. This is necessary because a newborn infant’ s neck is weak and its head weighs so much compared with the rest of its body .
1-47 CAUTION: People should never hold a baby in their arms while riding in a vehicle. A baby doesn’t weigh much -- until a crash. During a crash a baby will become so heavy it is not possible to hold it. For example, in a crash at only 25 mph (40 km/h), a 12 - lb.
1-48 Restraint Systems for Children An infant car bed (A), a special bed made for use in a motor vehicle, is an infant restraint system designed to restrain or position a child on a continuous flat surface. Make sure that the infant’ s head rests toward the center of the vehicle.
1-49 A forward - facing child seat (C - E) provides restraint for the child’ s body with the harness and also sometimes with surfaces such as T - shaped or shelf - like shields. A booster seat (F - G) is a child restraint designed to improve the fit of the vehicle’ s safety belt system.
1-50 Q: How do child restraints work? A: A child restraint system is any device designed for use in a motor vehicle to restrain, seat, or position children. A built - in child restraint system is a permanent part of the motor vehicle. An add - on child restraint system is a portable one, which is purchased by the vehicle’ s owner .
1-51 CAUTION: A child in a rear - facing child restraint can be seriously injur ed or killed if the right front passenger’ s air bag inflates. This is because the back of the rear - facing child restraint would be very close to the inflating air bag.
1-52 T op Strap Some child restraints have a top strap, or “top tether .” It can help restrain the child restraint during a collision. For it to work, a top strap must be properly anchored to the vehicle. If the child restraint does not have a top strap, one can be obtained, in kit form, for many child restraints.
1-53 If your vehicle is a passenger van with rear seats, it is recommended that you secure a child restraint with a top strap only in the outboard positions of the second row . Bucket Seats: An anchoring point is located below the rear of the seat cushion on the spacer bar .
1-54 The third row has one anchor for the passenger side outboard position only . Anchor the top strap to one of these anchor points. Be sure to use an anchor point located on the same side of the vehicle as the seating position where the child restraint will be placed.
1-55 T ilt the latch plate to adjust the belt if needed. If the shoulder belt goes in front of the child’ s face or neck, put it behind the child restraint. 3. Buckle the belt. Make sure the release button is positioned so you would be able to unbuckle the safety belt quickly if you ever had to.
1-56 4. T o tighten the belt, pull up on the shoulder belt while you push down on the child restraint. If you’re using a forward - facing child restraint, you may find it helpful to use your knee to push down on the child restraint as you tighten the belt.
1-57 Securing a Child Restraint in a Center Seat Position (Bench Seat) Y ou’ll be using the lap belt. Be sure to follow the instructions that came with the child restraint. Secure the child in the child restraint when and as the instructions say . See the earlier part about the top strap if the child restraint has one.
1-58 4. Buckle the belt. Make sure the release button is positioned so you would be able to unbuckle the safety belt quickly if you ever had to. 5. T o tighten the belt, pull its free end while you push down on the child restraint.
1-59 Securing a Child Restraint in the Right Front Seat Position Y our vehicle has a front passenger air bag. Never put a rear - facing child restraint in this seat. Here’ s why: CAUTION: A child in a rear - facing child restraint can be seriously injur ed or killed if the front passenger’ s air bag inflates.
1-60 1. Because your vehicle has a right front passenger air bag, always move the seat as far back as it will go before securing a forward - facing child restraint.
1-61 5. Pull the rest of the lap belt all the way out of the retractor to set the lock. 6. T o tighten the belt, feed the lap belt back into the retractor while you push down on the child restraint. Y ou may find it helpful to use your knee to push down on the child restraint as you tighten the belt.
1-62 Older Children Older children who have outgrown booster seats should wear the vehicle’ s safety belts. If you have the choice, a child should sit next to a window so the child can wear a lap - shoulder belt and get the additional restraint a shoulder belt can provide.
1-63 CAUTION: Never do this. Here two childr en are wearing the same belt. The belt can’t properly spr ead the impact forces. In a crash, the two children can be crushed together and seriously injur ed. A belt must be used by only one person at a time.
1-64 CAUTION: Never do this. Here a child is sitting in a seat that has a lap - shoulder belt, but the shoulder part is behind the child. If the child wears the belt in this way , in a crash the child might slide under the belt. The belt’ s force would then be applied right on the child’ s abdomen.
1-65 Safety Belt Extender If the vehicle’ s safety belt will fasten around you, you should use it. But if a safety belt isn’t long enough to fasten, your dealer will order you an extender . It’ s free. When you go in to order it, take the heaviest coat you will wear , so the extender will be long enough for you.
1-66 Replacing Restraint System Parts After a Crash If you’ve had a crash, do you need new belts? After a very minor collision, nothing may be necessary . But if the belts were stretched, as they would be if worn during a more severe crash, then you need new belts.
2- 2-1 Section 2 Featur es and Controls Here you can learn about the many standard and optional features on your vehicle, and information on starting, shifting and braking. Also explained are the instrument panel and the warning systems that tell you if everything is working properly -- and what to do if you have a problem.
2-2 Windows CAUTION: Leaving childr en in a vehicle with the windows closed is dangerous. A child can be over come by the extreme heat and can suffer permanent injuries or even death from heat str oke. Never leave a child alone in a vehicle, especially with the windows closed in warm or hot weather .
2-3 Power Windows (Option) If you have power windows, the controls are located on each of the front doors. The driver ’ s door also has a switch for the front passenger window . Y our power windows will not work unless the ignition is in RUN or ACCESSOR Y , or unless retained accessory power is active.
2-4 Keys CAUTION: Leaving childr en in a vehicle with the ignition key is dangerous for many r easons. A child or others could be badly injured or even killed. They could operate the power windows or other controls or even make the vehicle move. Don’t leave the keys in a vehicle with children.
2-5 This vehicle has one double - sided key for the ignition and door locks. It will fit with either side up. When a new vehicle is delivered, the dealer provides the owner with a pair of identical keys and a bar - coded tag. The bar - coded tag has a code on it that tells your dealer or a qualified locksmith how to make extra keys.
2-6 Front Doors T o open a front door from the outside, grasp the handle and pull the door open. T o open a front door from the inside, pull the lever toward you and push the door open. Rear Doors If you have the “Dutch doors,” you must open the hatch first.
2-7 T o open the driver ’ s side rear door , pull on the latch release handle located on the inside of the door . T o close the rear doors, close the driver ’ s side door first. Check to make sure both doors are completely closed. The rear doors have a check assembly to keep the doors from opening beyond 90 degrees.
2-8 Door Locks CAUTION: Unlocked doors can be danger ous. Passengers -- especially childr en -- can easily open the doors and fall out of a moving vehicle. When a door is locked, the handle won’t open it. Y ou increase the chance of being thrown out of the vehicle in a crash if the doors aren’t locked.
2-9 Power Door Locks (If Equipped) If your vehicle has power door locks, press the power door lock switch to lock or unlock all the doors at once. The power door lock switch will lock or unlock the rear hatch and Dutch doors. See “Hatch Release” in the Index.
2-10 3. Y ou are now ready to program the automatic door locks. Select one of the following four programming options and follow the instructions. Y ou will have thirty seconds to begin programming. If you exceed the thirty second limit, the locks will automatically lock and unlock to indicate that you have left the program mode.
2-1 1 Keyless Entry System (Option) If your vehicle has this feature, you can lock and unlock your doors from about 3 feet (1 m) up to 30 feet (9 m) away using the remote keyless entry transmitter supplied with your vehicle.
2-12 Operation UNLOCK: When you press UNLOCK, the driver ’ s door will unlock automatically , the parking lamps will flash and the interior lights will go on. If you press UNLOCK again within five seconds, all doors will unlock, the parking lamps will flash and the interior lights will go on.
2-13 Battery Replacement Under normal use, the battery in your remote keyless entry transmitter should last about two years. Y ou can tell the battery is weak if the transmitter won’t work at the normal range in any location. If you have to get close to your vehicle before the transmitter works, it’ s probably time to change the battery .
2-14 Resynchr onization Resynchronization may be necessary due to the security method used by this system. The transmitter does not send the same signal twice to the receiver . The receiver will not respond to a signal it has been sent previously . This will prevent anyone from recording and playing back the signal from the transmitter .
2-15 Sliding Door Security Lock Y our vehicle’ s sliding side door is equipped with a security door lock located at the front of the sliding door . There are two labels on your vehicle to remind you that you have this feature. One can be seen from the outside on your sliding door .
2-16 CAUTION: If your vehicle is facing downward on a steep grade (15 percent or mor e), the door may not stay open and could slam shut, possibly injuring someone. T o make sure the door does not slam shut, be sure to hold it open until everyone is clear of the door , and only then allow it to slowly close.
2-17 Hatch CAUTION: It can be dangerous to drive with the r ear hatch or rear doors open because carbon monoxide (CO) gas can come into your vehicle. Y ou can’t see or smell CO.
2-18 T o lock the power lock system from the outside, insert the key in the hatch release button and turn it clockwise. All doors will lock. Theft V ehicle theft is big business, especially in some cities. Although your vehicle has a number of theft - deterrent features, we know that nothing we put on it can make it impossible to steal.
2-19 Passlock Y our vehicle is equipped with the Passlock theft - deterrent system. Passlock is a passive theft - deterrent system. Passlock enables fuel if the ignition lock cylinder is turned with a valid key . If a correct key is not used or the ignition lock cylinder is tampered with, fuel is disabled.
2-20 Ignition Positions Use your ignition key to start your vehicle. The ignition key lets you turn the ignition switch to five different positions. ACCESSOR Y (A): This position lets you use things like the radio, power windows and windshield wipers when the engine is off.
2-21 NOTICE: If your key seems stuck in LOCK and you can’t turn it, be sure you ar e using the correct key; if so, is it all the way in? If it is, then turn the steering wheel left and right while you turn the key hard. But turn the key only with your hand.
2-22 NOTICE: Holding your key in ST AR T for longer than 15 seconds at a time will cause your battery to be drained much sooner . And the excessive heat can damage your starter motor . W ait about 15 seconds between each try to help avoid draining your battery or damaging your starter .
2-23 Engine Coolant Heater (If Equipped) In very cold weather , 0 F ( - 18 C) or colder , the engine coolant heater can help. Y ou’ll get easier starting and better fuel economy during engine warm - up. Usually , the coolant heater should be plugged in a minimum of four hours prior to starting your vehicle.
2-24 Automatic T ransmission Operation There are several different positions for your shift lever . P ARK (P): This position locks your rear wheels. It’ s the best position to use when you start your engine because your vehicle can’t move easily .
2-25 Ensure the shift lever is fully in P ARK (P) before starting the engine. Y our vehicle has an automatic transmission shift lock control system. Y ou have to fully apply your regular brakes before you can shift from P ARK (P) when the ignition key is in RUN.
2-26 DRIVE (D): This position is for normal driving. If you need more power for passing, and you’re: Going less than about 35 mph (55 km/h), push your accelerator pedal about halfway down. Going about 35 mph (55 km/h) or more, push the accelerator pedal all the way down.
2-27 T ow/Haul Mode Selector Switch Y our vehicle is equipped with a tow/haul selector switch. The selector switch is located on the end of the column shift lever . Y ou can use this feature to assist when towing or hauling a heavy load. T o select the tow/haul mode, press in the switch.
2-28 NOTICE: Driving with the parking brake on can cause your rear brakes to overheat. Y ou may have to replace them, and you could also damage other parts of your vehicle. If you are towing a trailer and are parking on a hill, see “T owing a Trailer” in the Index.
2-29 1. Hold the brake pedal down with your right foot and set the parking brake. 2. Move the shift lever into P ARK (P) like this: Pull the lever toward you. Move the lever up as far as it will go. 3. T urn the ignition key to LOCK. 4. Remove the key and take it with you.
2-30 Leaving Y our V ehicle W ith the Engine Running CAUTION: It can be dangerous to leave your vehicle with the engine running. Y our vehicle could move suddenly if the shift lever is not fully in P ARK (P) with the parking brake firmly set. And, if you leave the vehicle with the engine running, it could overheat and even catch fire.
2-31 Shifting Out of P ARK (P) Y our vehicle has an automatic transmission shift lock control system. Y ou have to fully apply your regular brake before you can shift from P ARK (P) when the ignition is in RUN. See “Automatic T ransmission” in the Index.
2-32 Engine Exhaust CAUTION: Engine exhaust can kill. It contains the gas carbon monoxide (CO), which you can’t see or smell. It can cause unconsciousness and death. Y ou might have exhaust coming in if: Y our exhaust system sounds strange or different.
2-33 CAUTION: It can be dangerous to get out of your vehicle if the shift lever is not fully in P ARK (P) with the parking brake firmly set. Y our vehicle can roll. Don’t leave your vehicle when the engine is running unless you have to. If you’ve left the engine running, the vehicle can move suddenly .
2-34 All - Wheel Drive (Option) If your vehicle has all - wheel drive, your engine’ s driving power is sent to all four wheels for extra traction when needed. This is like four - wheel drive, but there is no separate lever or switch to engage or disengage the front axle.
2-35 T urn Signal/Multifunction Lever The lever on the driver ’ s side of the steering column includes the following: T urn and Lane Change Signals Headlamp High/Low - Beam Changer Flash - to - Pass.
2-36 If a bulb is burned out, replace it to help avoid an accident. If the arrows don’t go on at all when you signal a turn, check the fuse (see “Fuses and Circuit Breakers” in the Index) and for burned - out bulbs. If you have a trailer towing option with added wiring for the trailer lamps, a different turn signal flasher is used.
2-37 Windshield W ipers Y ou control the windshield wipers by turning the band with the wiper symbol on it. For a single - wiping cycle, turn the band to MIST . Hold it there until the wipers start, then let go. The wipers will stop after one wipe. If you want more wipes, hold the band on MIST longer .
2-38 Rear Window W asher/Wiper (Option) Y ou control the rear window washer/wiper using a switch located on the instrument panel, next to the audio system. T o turn the wiper on, slide the switch all the way up. For delay wiping, slide the switch with the word DELA Y in the center position on the rear wiper control.
2-39 Setting Cruise Control CAUTION: If you leave your cruise control switch on when you’re not using cruise, you might hit a button and go into cruise when you don’t want to. Y ou could be startled and even lose control. Keep the cruise contr ol switch off until you want to use cruise control.
2-40 Increasing Speed While Using Cruise Contr ol There are two ways to go to a higher speed: Use the accelerator pedal to get to the higher speed. Press the button at the end of the lever , then release the button and the accelerator pedal. Y ou’ll now cruise at the higher speed.
2-41 Exterior Lamps The lamp control is located on the driver ’ s side of the instrument panel. T urn the knob clockwise to the parking lamp symbol to turn on the following: Parking Lamps Sidemarker.
2-42 Automatic Headlamp System When it is dark enough outside, your automatic headlamp system will turn on your headlamps at the normal brightness along with other lamps such as the taillamps, sidemarker , parking lamps and the instrument panel lights.
2-43 Daytime Running Lamps Daytime Running Lamps (DRL) can make it easier for others to see the front of your vehicle during the day . DRL can be helpful in many different driving conditions, but they can be especially helpful in the short periods after dawn and before sunset.
2-44 Interior Lamps Instrument Panel Intensity Control The instrument panel intensity control is located to the right of the headlamp switch. Move the thumbwheel up to adjust the instrument panel lights. T o turn on the dome lamps (with the vehicle doors closed), move the thumbwheel all the way up.
2-45 Battery Run-Down Protection This feature shuts off the dome, courtesy , vanity , reading and glove box lights if they are left on for more than 20 minutes when the ignition is off.
2-46 Power Remote Control Mirr or (If Equipped) T o move the mirror , move the knob in the middle of the control to “L” for the driver ’ s side mirror or to “R” for the passenger ’ s side mirror . Then press the four - way control pad to move the mirror in the desired direction.
2-47 Storage Compartments Y our front storage compartment/glove box is at the center of the engine cover . T o open the compartment, press the two tabs together and pull. If you have an optional sliding tray storage compartment, it is under the front passenger ’ s seat.
2-48 If you have rear storage compartments, pull up on the lid to open the cover . There is also a map/storage pocket on the passenger ’ s side of the engine cover console.
2-49 Overhead Console (Option) The overhead console includes reading lamps, a compartment for a garage door opener , a trip computer , a temperature and compass display , and a storage compartment for sunglasses.
2-50 Installing a Garage Door Opener If you have a garage door opener , the front overhead compartment can be used to conveniently store the opener . 1. T o install the garage door opener , first open the compartment door by pressing the latch forward.
2-51 6. Now , with the compartment door closed, press the button again to make sure the garage door opener operates properly . W ith the garage door opener positioned properly and the right number of pegs in place, you should only have to press the button slightly to operate the opener .
2-52 Driver Information System (If Equipped) This system displays the outside air temperature, compass direction and trip information in the overhead console. US/MET : The US/MET (United States/metric) button allows you to switch the display between the English and metric system.
2-53 1. Find your location on the zone map. Record your zone number . 2. Press and hold both the MODE and the US/MET buttons in the COMP/TEMP mode. 3. After five seconds, the compass will acknowledge the variation mode by displaying the current zone number .
2-54 Sunglasses Storage Compartment The console has a sunglasses storage compartment. Convenience Net (Option) Y ou may have a convenience net in the rear of your vehicle to help keep small loads, like grocery bags, in place during sharp turns or quick stops and starts.
2-55 NOTICE: Loading cargo that weighs more than 200 lbs. (91 kg) on the luggage carrier may damage your vehicle. When you carry large things, never let them hang over the rear or the sides of your vehicle. Load your cargo so that it rests on the slats and does not scratch or damage the vehicle.
2-56 NOTICE: When using the cigarette lighter as an accessory power outlet, maximum electrical load must not exceed 20 amps. Always turn off any electrical equipment when not in use. Leaving electrical equipment on for extended periods will drain your battery .
2-57 Accessory Power Outlets Y ou can plug accessory electrical equipment into accessory power outlets. Just pull up the outlet cover to remove it and follow the proper installation instructions that are included with any electrical equipment that you install.
2-58 Programming the T ransmitter Do not use the HomeLink T ransmitter with any garage door opener that does not have the “stop and reverse” feature. This includes any garage door opener model manufactured before April 1, 1982. Be sure that people and objects are clear of the garage door you are programming.
2-59 If you have trouble programming the HomeLink T ransmitter , make sure that you have followed the directions exactly as described and that the battery in the hand - held transmitter is not dead. If you still cannot program it, turn the hand - held transmitter end over end and try again.
2-60 Operating the T ransmitter Press and hold the appropriate button on the HomeLink T ransmitter . The indicator light comes on while the signal is being transmitted.
2-61 3. Return to the HomeLink Transmitter in your vehicle and firmly press and release the HomeLink T ransmitter button you have already programmed for two to three seconds.
2-62 The Instrument Panel - Y our Information System.
2-63 The main components of your instrument panel are the following: A. Lamp Switches B. Instrument Panel Cluster Intensity Control C. Multifunction Lever D. Hazard W arning Flasher Button E. T ransmission Shift Lever F . Ignition Switch G. Rear Defogger Button (Option) H.
2-64 Instrument Panel Cluster United States cluster shown -- Canada cluster similar Y our instrument panel cluster is designed to let you know at a glance how your vehicle is running. Y ou’ll know how fast you’re going, about how much fuel remains, and many other things you’ll need to know to drive safely and economically .
2-65 Speedometer and Odometer Y our speedometer lets you see your speed in both miles per hour (mph) and kilometers per hour (km/h). Y our odometer shows how far your vehicle has been driven, in either miles (used in the United States) or kilometers (used in Canada).
2-66 Safety Belt Reminder Light When the key is turned to RUN or ST AR T , a tone will come on for about eight seconds to remind people to fasten their safety belts, unless the driver ’ s safety belt is already buckled. The safety belt light will also come on and stay on for about 20 seconds, then it will flash for about 55 seconds.
2-67 If the air bag readiness light stays on after you start the vehicle or comes on when you are driving, your air bag system may not work properly . Have your vehicle serviced right away . CAUTION: If the air bag readiness light stays on after you start your vehicle, it means the air bag system may not be working properly .
2-68 V oltmeter When your engine is not running, but the ignition is on (in the RUN position), the gage shows your battery’ s state of charge in DC volts. When the engine is running, the gage shows the condition of the charging system. Readings between the low and high warning zones indicate the normal operating range.
2-69 This light should come on briefly when you turn the ignition key to RUN. If it doesn’t come on then, have it fixed so it will be ready to warn you if there’ s a problem. If the light comes on while you are driving, pull off the road and stop carefully .
2-70 Engine Coolant T emperature Gage This gage shows the engine coolant temperature. If the gage pointer moves to the red area, your engine is too hot! It means that your engine coolant has overheated.
2-71 NOTICE: If you keep driving your vehicle with this light on, after a while, your emission controls may not work as well, your fuel economy may not be as good and your engine may not run as smoothly . This could lead to costly repairs that may not be covered by your warranty .
2-72 If the light stops flashing and remains on steady , see “If the Light Is On Steady” following. If the light continues to flash, when it is safe to do so, stop the vehicle . Find a safe place to park your vehicle. T urn the key off, wait at least 10 seconds and restart the engine.
2-73 Emissions Inspection and Maintenance Programs Some state/provincial and local governments have or may begin programs to inspect the emission control equipment on your vehicle. Failure to pass this inspection could prevent you from getting a vehicle registration.
2-74 Oil Pressur e Gage The oil pressure gage shows the engine oil pressure in psi (pounds per square inch) when the engine is running. Canadian vehicles indicate pressure in kPa (kilopascals).
2-75 Security Light This light will come on briefly when you turn the key to ST AR T . The light will stay on until the engine starts. If the light flashes, the Passlock System has entered a tamper mode. If the vehicle fails to start, see “Passlock” in the Index.
2-76 T ow/Haul Light This light should come on when the tow/haul mode has been selected. For more information, see “T ow/Haul Mode” in the Index. Check Gages Light This light will come on briefly when you are starting the engine.
2-77 Fuel Gage United States Canada The fuel gage tells you approximately how much fuel you have remaining when the ignition is on. When the gage first indicates empty , you still have a little fuel left, but you should get more fuel as soon as possible.
3- 3-1 Section 3 Comfort Contr ols and Audio Systems In this section, you’ll find out how to operate the comfort control and audio systems offered with your vehicle.
3-2 Comfort Controls This section tells you how to make your air system work for you. Y our comfort control system uses ozone - friendly refrigerant. W ith these systems, you can control the heating, cooling and ventilation in your vehicle. Y our vehicle also has a flow - through ventilation system described later in this section.
3-3 BI - LEVEL: This setting brings in outside air and blows it out through the heater floor vents and the instrument panel vents. If you move the temperature knob between hot and cold, cooler air will come out of the upper vents while warmer air comes out of the floor vent.
3-4 Function Knob This knob is next to the temperature knob. The function knob allows you to choose the direction of air delivery . OFF: This setting turns the system off. VENT : The air comes out at the vents on your instrument panel. BI - LEVEL: W ith this setting, the heated outside air comes out both the instrument panel vents and heater vents.
3-5 Rear Air Conditioning System (Option) Y ou may have rear air conditioning. The rear air conditioning thumbwheel is located to the right of the heater controls. T urn the thumbwheel toward HIGH for higher airflow in the rear area. T urn the switch to OFF to turn the system off.
3-6 Heating On cold days, use HEA TER with the temperature knob in the red area. Outside air will be brought in through the floor outlets. The heater works best if you keep your windows closed while using it.
3-7 NOTICE: Don’t use a razor blade or something else sharp on the inside of the rear window . If you do, you could cut or damage the defogger and the repairs would not be covered by your warranty . V entilation System For mild outside temperatures when little heating or cooling is needed, use VENT to direct outside air through your vehicle.
3-8 When you close a vent, it will increase the flow of air coming out of any vents that are open. If you have rear heating or rear air conditioning, you will have adjustable vents in the rear of the vehicle to help direct the airflow . The rear air conditioning vents are located in the headliner at the rear of the vehicle.
3-9 AM-FM Stereo Playing the Radio VOLUME: This knob turns the system on and off and controls the volume. T o increase volume and turn the radio on, turn the knob clockwise. Turn it counterclockwise to decrease volume and turn the radio off. RECALL: Display the time with the ignition of f by pressing the recall knob.
3-10 PUSHBUTT ONS: The four numbered pushbuttons let you return to your favorite stations. Y ou can set up to 14 stations (seven AM and seven FM). Just: 1. T urn the radio on. 2. Press AM - FM to select the band. 3. T une in the desired station. 4. Press SET .
3-1 1 AM-FM Stereo with Compact Disc Player and Automatic T one Control (If Equipped) Playing the Radio PWR - V OL: Press this knob to turn the system on and off. T o increase volume, turn this knob clockwise. T urn it counterclockwise to decrease volume.
3-12 PUSHBUTT ONS: The six numbered pushbuttons let you return to your favorite stations. Y ou can set up to 18 stations (six AM, six FM1 and six FM2). Just: 1. T urn the radio on. 2. Press AM - FM to select the band. 3. T une in the desired station. 4.
3-13 Adjusting the Speakers BAL: Press lightly on this knob to release it from its stored position. T urn the control clockwise to adjust sound to the right speakers and counterclockwise to adjust sound to the left speakers. The middle position balances the sound between the speakers.
3-14 REV (4): Press and hold REV to return rapidly to a favorite passage. Y ou will hear the disc selection play at high speed while you press the REV button. This allows you to listen and find out when the disc is at the desired selection. Release REV to resume playing.
3-15 Rear Seat Audio (If Equipped) This feature allows rear seat passengers to listen to any of the music sources including AM - FM, automatic tone control and CDs. However , the rear seat passengers can only control the music sources that the front seat passengers are not listening to.
3-16 While listening to a CD, press the up arrow to hear the next selection on the CD. Press the down arrow to go back to the start of the current selection (if more than eight seconds have played). The SEEK button is inactive if the CD mode on the front radio is in use.
3-17 A disc that has been ejected but is still sitting in the remote CD player will be pulled back into the player after approximately 30 seconds. This protects the disc and player from damage. The disc will not start playing. T o remove the disc, press the EJECT button and remove the disc from the player .
3-18 RANDOM: Press P .SCAN to enter the random play mode. RANDOM will appear on the display . While in this mode, the tracks on the disc will be played in random order . If you press SEEK, PREV or NEXT while in the random mode, the previous or next track will be scanned randomly .
3-19 Activating the Theft - Deterrent Featur e The instructions which follow explain how to enter your secret code to activate the THEFTLOCK system. It is recommended that you read through all nine steps before starting the procedure.
3-20 Unlocking the Theft - Deterr ent Featur e After a Power Loss Enter your secret code as follows; pause no more than 15 seconds between steps: 1. T urn the ignition on. LOC will appear on the display . 2. Press MN and 000 will appear on the display .
3-21 Understanding Radio Reception AM The range for most AM stations is greater than for FM, especially at night. The longer range, however , can cause stations to interfere with each other . AM can pick up noise from things like storms and power lines.
3-22 Care of Y our Compact Discs Handle discs carefully . Store them in their original cases or other protective cases and away from direct sunlight and dust. If the surface of a disc is soiled, dampen a clean, soft cloth in a mild, neutral detergent solution and clean it, wiping from the center to the edge.
4- 4-1 Section 4 Y our Driving and the Road Here you’ll find information about driving on different kinds of roads and in varying weather conditions.
4-2 Defensive Driving The best advice anyone can give about driving is: Drive defensively . Please start with a very important safety device in your vehicle: Buckle up. See “Safety Belts” in the Index. Defensive driving really means “be ready for anything.
4-3 Drunken Driving Death and injury associated with drinking and driving is a national tragedy . It’ s the number one contributor to the highway death toll, claiming thousands of victims every year . Alcohol affects four things that anyone needs to drive a vehicle: Judgment Muscular Coordination V ision Attentiveness.
4-4 It’ s the amount of alcohol that counts. For example, if the same person drank three double martinis (3 ounces or 90 ml of liquor each) within an hour , the person’ s BAC would be close to 0.12 percent. A person who consumes food just before or during drinking will have a somewhat lower BAC level.
4-5 The body takes about an hour to rid itself of the alcohol in one drink. No amount of coffee or number of cold showers will speed that up. “I’ll be careful” isn’t the right answer .
4-6 Control of a V ehicle Y ou have three systems that make your vehicle go where you want it to go. They are the brakes, the steering and the accelerator .
4-7 A void needless heavy braking. Some people drive in spurts -- heavy acceleration followed by heavy braking -- rather than keeping pace with traffic. This is a mistake. Y our brakes may not have time to cool between hard stops. Y our brakes will wear out much faster if you do a lot of heavy braking.
4-8 Here’ s how anti - lock works. Let’ s say the road is wet. Y ou’re driving safely . Suddenly an animal jumps out in front of you. Y ou slam on the brakes and continue braking. Here’ s what happens with ABS. A computer senses that wheels are slowing down.
4-9 Remember: Anti - lock doesn’t change the time you need to get your foot up to the brake pedal or always decrease stopping distance. If you get too close to the vehicle in front of you, you won’t have time to apply your brakes if that vehicle suddenly slows or stops.
4-10 What should you do if this ever happens? Ease up on the accelerator pedal, steer the vehicle the way you want it to go, and slow down. Speed limit signs near curves warn that you should adjust your speed. Of course, the posted speeds are based on good weather and road conditions.
4-1 1 An emergency like this requires close attention and a quick decision. If you are holding the steering wheel at the recommended 9 and 3 o’clock positions, you can turn it a full 180 degrees very quickly without removing either hand.
4-12 Passing The driver of a vehicle about to pass another on a two - lane highway waits for just the right moment, accelerates, moves around the vehicle ahead, then goes back into the right lane again.
4-13 Check your mirrors, glance over your shoulder and start your left lane change signal before moving out of the right lane to pass. When you are far enough ahead of the passed vehicle to see its front in your inside mirror , activate your right lane change signal and move back into the right lane.
4-14 If your vehicle starts to slide, ease your foot off the accelerator pedal and quickly steer the way you want the vehicle to go. If you start steering quickly enough, your vehicle may straighten out. Always be ready for a second skid if it occurs.
4-15 Here are some tips on night driving. Drive defensively . Don’t drink and drive. Adjust your inside rearview mirror to reduce the glare from headlamps behind you. Since you can’t see as well, you may need to slow down and keep more space between you and other vehicles.
4-16 Driving in Rain and on W et Roads Rain and wet roads can mean driving trouble. On a wet road, you can’t stop, accelerate or turn as well because your tire - to - road traction isn’t as good as on dry roads. And, if your tires don’t have much tread left, you’ll get even less traction.
4-17 Driving too fast through large water puddles or even going through some car washes can cause problems, too. The water may affect your brakes. T ry to avoid puddles. But if you can’t, try to slow down before you hit them. CAUTION: W et brakes can cause accidents.
4-18 Driving Thr ough Deep Standing W ater NOTICE: If you drive too quickly through deep puddles or standing water , water can come in through your engine’ s air intake and badly damage your engine. Never drive through water that is slightly lower than the underbody of your vehicle.
4-19 City Driving One of the biggest problems with city streets is the amount of traffic on them. Y ou’ll want to watch out for what the other drivers are doing and pay attention to traffic signals. Here are ways to increase your safety in city driving: Know the best way to get to where you are going.
4-20 Freeway Driving Mile for mile, freeways (also called thruways, parkways, expressways, turnpikes or superhighways) are the safest of all roads. But they have their own special rules. The most important advice on freeway driving is: Keep up with traffic and keep to the right.
4-21 When you want to leave the freeway , move to the proper lane well in advance. If you miss your exit, do not, under any circumstances, stop and back up. Drive on to the next exit. The exit ramp can be curved, sometimes quite sharply . The exit speed is usually posted.
4-22 Highway Hypnosis Is there actually such a condition as “highway hypnosis”? Or is it just plain falling asleep at the wheel? Call it highway hypnosis, lack of awareness, or whatever .
4-23 If you drive regularly in steep country , or if you’re planning to visit there, here are some tips that can make your trips safer and more enjoyable. Keep your vehicle in good shape. Check all fluid levels and also the brakes, tires, cooling system and transmission.
4-24 Winter Driving Here are some tips for winter driving: Have your vehicle in good shape for winter . Y ou may want to put winter emergency supplies in your vehicle.
4-25 What’ s the worst time for this? “W et ice.” V ery cold snow or ice can be slick and hard to drive on. But wet ice can be even more trouble because it may offer the least traction of all. Y ou can get wet ice when it’ s about freezing (32 F; 0 C) and freezing rain begins to fall.
4-26 If Y ou’re Caught in a Blizzard If you are stopped by heavy snow , you could be in a serious situation. Y ou should probably stay with your vehicle unless you know for sure that you are near help and you can hike through the snow .
4-27 CAUTION: Snow can trap exhaust gases under your vehicle. This can cause deadly CO (carbon monoxide) gas to get inside. CO could overcome you and kill you. Y ou can’t see it or smell it, so you might not know it is in your vehicle. Clear away snow from around the base of your vehicle, especially any that is blocking your exhaust pipe.
4-28 Loading Y our V ehicle The Certification/T ire label in your vehicle will look similar to this example. The Certification/T ire label is found on the rear edge of the driver ’ s door . The label shows the size of your original tires and the inflation pressures needed to obtain the gross weight capacity of your vehicle.
4-29 CAUTION: Do not load your vehicle any heavier than the GVWR, or either the maximum front or r ear GA WR. If you do, parts on your vehicle can break, and it can change the way your vehicle handles. These could cause you to lose control and crash. Also, overloading can shorten the life of your vehicle.
4-30 Payload The Payload Capacity is shown on the Certification/T ire label. This is the maximum load capacity that your vehicle can carry . Be sure to include the weight of the people inside as part of your load.
4-31 T owing a T railer CAUTION: If you don’t use the correct equipment and drive properly , you can lose control when you pull a trailer . For example, if the trailer is too heavy , the brakes may not work well -- or even at all. Y ou and your passengers could be seriously injured.
4-32 If Y ou Do Decide T o Pull A T railer If you do, here are some important points: There are many different laws, including speed limit restrictions, having to do with trailering. Make sure your rig will be legal, not only where you live but also where you’ll be driving.
4-33 The T ow/Haul Mode is most effective when the vehicle and trailer combined weight is at least 75% of the Gross V ehicle W eight Rating (GVWR) and the maximum trailer weight rating for the vehicle. See “Gross V ehicle W eight Rating” and “T railer W eight” in the Index.
4-34 Maximum trailer weight is calculated assuming the driver and one passenger are in the tow vehicle and it has all the required trailering equipment. The weight of additional optional equipment, passengers and cargo in the tow vehicle must be subtracted from the maximum trailer weight.
4-35 T otal W eight on Y our V ehicle’s T ir es Be sure your vehicle’ s tires are inflated to the upper limit for cold tires. Y ou’ll find these numbers on the Certification label at the rear edge of the driver ’ s door or see “T ire Loading” in the Index.
4-36 T railer Brakes If your trailer weighs more than 1,000 lbs. (450 kg) loaded, then it needs its own brakes -- and they must be adequate. Be sure to read and follow the instructions for the trailer brakes so you’ll be able to install, adjust and maintain them properly .
4-37 T owing a trailer requires a certain amount of experience. Before setting out for the open road, you’ll want to get to know your rig. Acquaint yourself with the feel of handling and braking with the added weight of the trailer .
4-38 Making T urns NOTICE: Making very sharp turns while trailering could cause the trailer to come in contact with the vehicle. Y our vehicle could be damaged. A void making very sharp turns while trailering. When you’re turning with a trailer, make wider turns than normal.
4-39 Parking on Hills CAUTION: Y ou really should not park your vehicle, with a trailer attached, on a hill. If something goes wrong, your rig could start to move. People can be injured, and both your vehicle and the trailer can be damaged. But if you ever have to park your rig on a hill, here’ s how to do it: 1.
4-40 T railer Wiring Harness If you have the optional trailering package, your vehicle will have an eight - wire harness, including the center high - mounted stoplamp battery feed wire. The harness is stored on the passenger ’ s side of the vehicle near the rear wheel well.
5- 5-1 Section 5 Pr oblems on the Road Here you’ll find what to do about some problems that can occur on the road. 5 - 2 Hazard W arning Flashers 5 - 3 Other W arning Devices 5 - 3 Jump Starting 5 -.
5-2 Hazard W arning Flashers Y our hazard warning flashers let you warn others. They also let police know you have a problem. Y our front and rear turn signal lamps will flash on and off. The hazard warning flasher button is located on top of the steering column.
5-3 Other W arning Devices If you carry reflective triangles, you can set one up at the side of the road about 300 feet (100 m) behind your vehicle. Jump Starting If your battery has run down, you may want to use another vehicle and some jumper cables to start your vehicle.
5-4 2. Get the vehicles close enough so the jumper cables can reach, but be sure the vehicles aren’t touching each other . If they are, it could cause a ground connection you don’t want. Y ou wouldn’t be able to start your vehicle, and the bad grounding could damage the electrical systems.
5-5 CAUTION: Fans or other moving engine parts can injure you badly . Keep your hands away from moving parts once the engine is running. 5. Check that the jumper cables don’t have loose or missing insulation. If they do, you could get a shock. The vehicles could be damaged too.
5-6 8. Now connect the black negative ( - ) cable to the good battery’ s negative ( - ) terminal. Don’t let the other end touch anything until the next step.
5-7 T o disconnect the jumper cables from both vehicles, do the following: 1. Disconnect the black negative ( - ) cable from the heavy , unpainted metal engine part on the vehicle that had the dead battery . 2. Disconnect the black negative ( - ) cable from the negative ( - ) terminal on the vehicle with the good battery .
5-8 If Steam Is Coming From Y our Engine CAUTION: Steam from an overheated engine can burn you badly , even if you just open the hood. Stay away from the engine if you see or hear steam coming from it. Just turn it off and get everyone away from the vehicle until it cools down.
5-9 If No Steam Is Coming From Y our Engine If you get an engine overheat warning but see or hear no steam, the problem may not be too serious. Sometimes the engine can get a little too hot when you: Climb a long hill on a hot day . Stop after high - speed driving.
5-10 Cooling System When you decide it’ s safe to lift the hood, here’ s what you’ll see: A. Coolant Recovery T ank B. Radiator Pressure Cap C. Engine Cooling Fan If the coolant inside the coolant recovery tank is boiling, don’t do anything else until it cools down.
5-1 1 CAUTION: Heater and radiator hoses, and other engine parts, can be very hot. Don’t touch them. If you do, you can be burned. Don’t run the engine if there is a leak. If you run the engine, it could lose all coolant. That could cause an engine fire, and you could be burned.
5-12 How to Add Coolant to the Coolant Recovery T ank If you haven’t found a problem yet, but the coolant level isn’t at the ADD mark, add a 50/50 mixture of clean, drinkable water and DEX - COOL engine coolant at the coolant recovery tank. See “Engine Coolant” in the Index for more information.
5-13 CAUTION: Y ou can be burned if you spill coolant on hot engine parts. Coolant contains ethylene glycol and it will burn if the engine parts are hot enough. Don’t spill coolant on a hot engine. When the coolant in the coolant recovery tank is at the ADD mark, start your vehicle.
5-14 CAUTION: Steam and scalding liquids from a hot cooling system can blow out and burn you badly . They are under pr essure, and if you turn the radiator pressur e cap -- even a little -- they can come out at high speed. Never turn the cap when the cooling system, including the radiator pressur e cap, is hot.
5-15 How to Add Coolant to the Radiator 1. Y ou can remove the radiator pressure cap when the cooling system, including the radiator pressure cap and upper radiator hose, is no longer hot. T urn the pressure cap slowly counterclockwise until it first stops.
5-16 3. Fill the radiator with the proper DEX - COOL coolant mixture, up to the base of the filler neck. See “Engine Coolant” in the Index for more information about the proper coolant mixture. 4. Then fill the coolant recovery tank to the ADD mark.
5-17 6. Start the engine and let it run until you can feel the upper radiator hose getting hot. W atch out for the engine cooling fan. 7. By this time, the coolant level inside the radiator filler neck may be lower .
5-18 Engine Fan Noise This vehicle has a clutched engine cooling fan. When the clutch is engaged, the fan spins faster to provide more air to cool the engine. In most everyday driving conditions, the clutch is not fully engaged. This improves fuel economy and reduces fan noise.
5-19 Changing a Flat Tir e If a tire goes flat, avoid further tire and wheel damage by driving slowly to a level place. T urn on your hazard warning flashers. CAUTION: Changing a tire can cause an injury . The vehicle can slip off the jack and roll over you or other people.
5-20 Removing the Spare T ire and T ools The jacking equipment you’ll need is stored by your vehicle’ s rear doors, along the passenger ’ s side wall. Remove the jack cover by pulling it away from the side wall and down to release the tabs securing the top of the cover .
5-21 Y our compact spare tire is stored underneath the rear of your vehicle. Y ou will use the ratchet and extension to lower the spare tire. The ratchet has an UP side. It also has a DOWN side. Attach the ratchet, with the DOWN side facing you, to the extension.
5-22 Put the flat end of the extension on an angle through the hole in the rear door frame, above the bumper . Be sure the flat end connects into the hoist shaft. T urn the ratchet counterclockwise to lower the spare tire to the ground. Keep turning the ratchet until the spare tire can be pulled out from under the vehicle.
5-23 The tools you’ll be using include the jack (A), wheel blocks (B), extension (C) and ratchet (D). Removing the Wheel Covers Y ou will have to take off hub caps or wheel nut caps to reach your wheel nuts.
5-24 Removing the Flat Tir e and Installing the Spare T ire 1. Before you start, block the front and rear of the tire farthest away from the one being changed. Then put your compact spare tire near the flat tire. 2. W ith the DOWN side facing you, use the ratchet and socket to loosen all the wheel nuts.
5-25 4. Attach the ratchet to the extension with the UP side facing you. 5. T urn the ratchet clockwise. That will raise the jack lift head a little. 6.
5-26 Front Position A. Front Jack Location B. Jack C. Ratchet and Extension Rear Position A. Rear Jack Location B. Jack C. Ratchet and Extension.
5-27 CAUTION: Getting under a vehicle when it is jacked up is dangerous. If the vehicle slips off the jack, you could be badly injured or killed. Never get under a vehicle when it is supported only by a jack. CAUTION: Raising your vehicle with the jack improperly positioned can damage the vehicle and even make the vehicle fall.
5-28 9. Remove any rust or dirt from the wheel bolts, mounting surfaces and spare wheel. CAUTION: Rust or dirt on the wheel, or on the parts to which it is fastened, can make the wheel nuts become loose after a time. The wheel could come off and cause an accident.
5-29 12. Lower the vehicle by turning the ratchet counterclockwise. Lower the jack completely . 13. T ighten the wheel nuts firmly in a crisscross sequence as shown.
5-30 CAUTION: Incorr ect wheel nuts or impr operly tightened wheel nuts can cause the wheel to become loose and even come off. This could lead to an accident. Be sur e to use the corr ect wheel nuts. If you have to replace them, be sur e to get new GM original equipment wheel nuts.
5-31 Storing a Flat or Spare T ire and T ools CAUTION: Storing a jack, a tire or other equipment in the passenger compartment of the vehicle could cause injury . In a sudden stop or collision, loose equipment could strike someone. Store all these in the proper place.
5-32 5. Make sure the tire is stored securely . Push, pull, and then try to rotate or turn the tire. If the tire moves, use the ratchet/wheel wrench to tighten the cable.
5-33 NOTICE: When the compact spare is installed, don’t take your vehicle through an automatic car wash with guide rails. The compact spare can get caught on the rails. That can damage the tire and wheel, and maybe other parts of your vehicle. Don’t use your compact spare on other vehicles.
5-34 NOTICE: Spinning your wheels can destroy parts of your vehicle as well as the tires. If you spin the wheels too fast while shifting your transmission back and forth, you can destroy your transmission. For information about using tire chains on your vehicle, see “T ire Chains” in the Index.
6- 6-1 Section 6 Service and Appearance Car e Here you will find information about the care of your vehicle. This section begins with service and fuel information, and then it shows how to check important fluid and lubricant levels. There is also technical information about your vehicle, and a part devoted to its appearance care.
6-2 Service Y our dealer knows your vehicle best and wants you to be happy with it. W e hope you’ll go to your dealer for all your service needs. Y ou’ll get genuine GM parts and GM - trained and supported service people. W e hope you’ll want to keep your GM vehicle all GM.
6-3 CAUTION: Y ou can be injured and your vehicle could be damaged if you try to do service work on a vehicle without knowing enough about it. Be sure you have sufficient knowledge, experience, the proper r eplacement parts and tools before you attempt any vehicle maintenance task.
6-4 Be sure the posted octane is at least 87. If the octane is less than 87, you may get a heavy knocking noise when you drive. If it’ s bad enough, it can damage your engine. If you’re using fuel rated at 87 octane or higher and you hear heavy knocking, your engine needs service.
6-5 NOTICE: Y our vehicle was not designed for fuel that contains methanol. Don’t use it. It can corrode metal parts in your fuel system and also damage plastic and rubber parts.
6-6 T o remove the cap, turn it slowly to the left (counterclockwise). The cap has a spring in it; if you let go of the cap too soon, it will spring back to the right. CAUTION: If you get gasoline on yourself and then something ignites it, you could be badly burned.
6-7 When you put the cap back on, turn it to the right (clockwise) until you hear a clicking sound. Make sure you fully install the cap. The diagnostic system can determine if the fuel cap has been left off or improperly installed. This would allow fuel to evaporate into the atmosphere.
6-8 Checking Things Under the Hood CAUTION: Things that burn can get on hot engine parts and start a fire. These include liquids like fuel, oil, coolant, brake fluid, windshield washer and other fluids, and plastic or rubber . Y ou or others could be burned.
6-9 Then go to the front of the vehicle and release the secondary hood release. Lift the hood, release the hood prop from its retainer and put the hood prop into the slot in the hood.
6-10 Engine Compartment Overview When you open the hood, this is what you will see: A. W indshield W asher Fluid B. Engine Coolant C. Engine Oil Dipstick D. T ransmission Dipstick E. Engine Air Cleaner/Filter F . Engine Oil Fill G. Brake Master Cylinder Reservoir H.
6-1 1 Before closing the hood, be sure all the filler caps are on properly . Then lift the hood to relieve pressure on the hood prop. Remove the hood prop from the slot in the hood and return the prop to its retainer . Then just pull the hood down and close it firmly .
6-12 T urn off the engine and give the oil several minutes to drain back into the oil pan. If you don’t, the oil dipstick might not show the actual level. Pull out the dipstick and clean it with a paper towel or cloth, then push it back in all the way .
6-13 What Kind of Engine Oil to Use Oils recommended for your vehicle can be identified by looking for the starburst symbol. This symbol indicates that the oil has been certified by the American Petroleum Institute (API). Do not use any oil which does not carry this starburst symbol.
6-14 As in the chart shown previously , SAE 5W - 30 is best for your vehicle. However , you can use SAE 10W - 30 if it’ s going to be 0 F ( - 18 C) or above. These numbers on an oil container show its viscosity , or thickness. Do not use other viscosity oils, such as SAE 20W - 50.
6-15 If none of them is true, use the long trip/highway maintenance schedule. Change the oil and filter every 7,500 miles (12 500 km) or 12 months -- whichever occurs first. Driving a vehicle with a fully warmed engine under highway conditions causes engine oil to break down slower .
6-16 2. Remove the instrument panel extension by removing the two nuts that secure it in place. The nuts are located at the bottom of the extension on the driver ’ s and passenger ’ s side corners. 3. Remove the screws located near the top on each side of the extension.
6-17 4. Disconnect the electrical connectors and set the extension aside. 5. Grasp the top of the heater duct and pull down gently to remove it..
6-18 6. Remove the two bolts at the engine cover . The bolts are not supposed to come out of the cover , only from the front of the dash. When removing the cover , be careful not to damage the instrument panel or the trim. 7. Disconnect the AM radio ground strap.
6-19 Installing the Engine Cover 1. Lift the engine cover into the vehicle and slide it all the way forward. Make sure the rubber seal is over the latches. 2. Install the two bolts at the engine cover . 3. Put the heater duct over the engine cover studs.
6-20 CAUTION: Operating the engine with the air cleaner/filter off can cause you or others to be burned. The air cleaner not only cleans the air , it stops flame if the engine backfires. If it isn’t ther e, and the engine backfires, you could be burned.
6-21 How to Check Because this operation can be a little dif ficult, you may choose to have this done at the dealership service department. If you do it yourself, be sure to follow all the instructions here, or you could get a false reading on the dipstick.
6-22 Checking the Fluid Level Prepare your vehicle as follows: Park your vehicle on a level place. Keep the engine running. W ith the parking brake applied, place the shift lever in P ARK (P). W ith your foot on the brake pedal, move the shift lever through each gear range, pausing for about three seconds in each range.
6-23 3. Check both sides of the dipstick, and read the lower level. The fluid level must be in the COLD area, below the cross - hatched area, for a cold check or in the HOT area or cross - hatched area for a hot check.
6-24 All - Wheel Drive (If Equipped) If you have an all - wheel - drive vehicle, be sure to perform the lubricant checks described in this section. However , they have two additional systems that need lubrication. T ransfer Case When to Check Lubricant Refer to the Maintenance Schedule to determine how often to check the lubricant.
6-25 Front Axle When to Check and Change Lubricant Refer to the Maintenance Schedule to determine how often to check the lubricant and when to change it. See “Scheduled Maintenance Services” in the Index. How to Check Lubricant If the level is below the bottom of the filler plug hole, you’ll need to add some lubricant.
6-26 What to Use Refer to the Maintenance Schedule to determine what kind of lubricant to use. See “Recommended Fluids and Lubricants” in the Index.
6-27 CAUTION: Adding only plain water to your cooling system can be dangerous. Plain water , or some other liquid like alcohol, can boil before the pr oper coolant mixture will. Y our vehicle’ s coolant warning system is set for the proper coolant mixture.
6-28 Checking Coolant The engine coolant tank is located on the passenger ’ s side of the engine compartment at the front of the engine. See “Engine Compartment Overview” in the Index for more information on location. The vehicle must be on a level surface.
6-29 Occasionally check the coolant level in the radiator . For information on how to add coolant to the radiator , see “Cooling System” in the Index. Radiator Pressur e Cap The radiator pressure cap is located on on the passenger ’ s side of the engine compartment.
6-30 Power Steering Fluid When to Check Power Steering Fluid It is not necessary to regularly check power steering fluid unless you suspect there is a leak in the system or you hear an unusual noise. A fluid loss in this system could indicate a problem.
6-31 Adding W asher Fluid The windshield washer fluid fill tank is located on the passenger ’ s side of the engine compartment. See “Engine Compartment Overview” in the Index for more information on location. Open the cap labeled W ASHER FLUID ONL Y .
6-32 Brakes Brake Fluid Y our brake master cylinder reservoir is filled with DOT - 3 brake fluid. See “Engine Compartment Overview” in the Index for the location of the reservoir . There are only two reasons why the brake fluid level in the reservoir might go down.
6-33 Checking Brake Fluid Y ou can check the brake fluid without taking off the cap. Just look at the brake fluid reservoir . The fluid level should be above MIN. If it isn’t, have your brake system checked to see if there is a leak. After work is done on the brake hydraulic system, make sure the level is above the MIN but not over the MAX mark.
6-34 NOTICE: Using the wrong fluid can badly damage brake system parts. For example, just a few drops of mineral - based oil, such as engine oil, in your brake system can damage brake system parts so badly that they’ll have to be replaced. Don’t let someone put in the wrong kind of fluid.
6-35 Y our rear drum brakes don’t have wear indicators, but if you ever hear a rear brake rubbing noise, have the rear brake linings inspected immediately . Also, the rear brake drums should be removed and inspected each time the tires are removed for rotation or changing.
6-36 W ARNING: Battery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and reproductive harm. W ash hands after handling. V ehicle Storage If you’re not going to drive your vehicle for 25 days or more, remove the black, negative ( - ) cable from the battery .
6-37 Headlamps Sealed Beam Lamps 1. Remove the four retainer screws and the retainer . 2. Pull the connector out and unplug the lamp. 3. Plug the new lamp into the connector .
6-38 Composite Headlamps 1. Open the hood. 2. Remove the two screws from the sidemarker/turn signal lamp. 3. Completely remove the sidemarker/turn signal lamp by pulling out the assembly and disconnecting the sidemarker/turn signal lamp sockets from the lamp.
6-39 4. Remove the screw located behind the corner reflector to remove the entire corner reflector . 5. Remove the remaining three screws; the first one from the corner reflector pocket and the two remaining from the composite assembly . 6. Remove the composite assembly .
6-40 7. T urn the halogen bulb counterclockwise to remove it from the assembly . 8. Install the new bulb into the composite assembly by turning it clockwise until it is completely tightened. 9. Reinstall the composite assembly by installing and tightening all of the screws previously removed.
6-41 T aillamps 1. Open the rear door . 2. Remove the two screws from behind the door . 3. Pull out the taillamp assembly so you can see the socket..
6-42 4. Press the tab and turn the socket counterclockwise to remove the socket from the bezel. If the socket does not have a tab, turn the socket counterclockwise to remove the socket from the bezel. 5. Remove the old bulb from the socket and replace it with a new one.
6-43 Tire s Y our new vehicle comes with high - quality tires made by a leading tire manufacturer . If you ever have questions about your tire warranty and where to obtain service, see your V ehicle W arranty booklet for details. CAUTION: Poorly maintained and improperly used tir es are danger ous.
6-44 NOTICE: Don’t let anyone tell you that underinflation or overinflation is all right. It’ s not. If your tires don’t have enough air (underinflation), you can get the following: T oo much flexing T oo much heat Tir e overloading Bad wear Bad handling Bad fuel economy .
6-45 The purpose of regular rotation is to achieve more uniform wear for all tires on the vehicle. The first rotation is the most important. See “Scheduled Maintenance Services” in the Index for scheduled rotation intervals. When rotating your tires, always use the correct rotation pattern shown here.
6-46 When It’ s Time for New T ires One way to tell when it’ s time for new tires is to check the treadwear indicators, which will appear when your tires have only 1/16 inch (1.6 mm) or less of tread remaining. Y ou need a new tire if any of the following statements are true: Y ou can see the indicators at three or more places around the tire.
6-47 CAUTION: Mixing tires could cause you to lose contr ol while driving. If you mix tires of differ ent sizes or types (radial and bias - belted tires), the vehicle may not handle properly , and you could have a crash. Using tires of differ ent sizes may also cause damage to your vehicle.
6-48 T readwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and a half (1 1/2) times as well on the government course as a tire graded 100.
6-49 Wheel Alignment and Tir e Balance The wheels on your vehicle were aligned and balanced carefully at the factory to give you the longest tire life and best overall performance.
6-50 Used Replacement Wheels CAUTION: Putting a used wheel on your vehicle is dangerous. Y ou can’t know how it’ s been used or how far it’ s been driven. It could fail suddenly and cause an accident. If you have to replace a wheel, use a new GM original equipment wheel.
6-51 Appearance Care Remember , cleaning products can be hazardous. Some are toxic. Others can burst into flame if you strike a match or get them on a hot part of the vehicle.
6-52 Here are some cleaning tips: Always read the instructions on the cleaner label. Clean up stains as soon as you can -- before they set. Carefully scrape off any excess stain. Use a clean cloth or sponge, and change to a clean area often. A soft brush may be used if stains are stubborn.
6-53 Cleaning V inyl Use warm water and a clean cloth. Rub with a clean, damp cloth to remove dirt. Y ou may have to do it more than once. Things like tar , asphalt and shoe polish will stain if you don’t get them of f quickly . Use a clean cloth and a vinyl/leather cleaner .
6-54 Cleaning Glass Surfaces Glass should be cleaned often. GM Glass Cleaner or a liquid household glass cleaner will remove normal tobacco smoke and dust films on interior glass. See “Appearance Care and Materials” in the Index. Don’t use abrasive cleaners on glass, because they may cause scratches.
6-55 W ashing Y our V ehicle The best way to preserve your vehicle’ s finish is to keep it clean by washing it often with lukewarm or cold water . Don’t wash your vehicle in the direct rays of the sun. Use a car washing soap. Don’t use strong soaps or chemical deter gents.
6-56 If necessary , use non - abrasive cleaners that are marked safe for painted surfaces to remove foreign matter . Exterior painted surfaces are subject to aging, weather and chemical fallout that can take their toll over a period of years.
6-57 Finish Damage Any stone chips, fractures or deep scratches in the finish should be repaired right away . Bare metal will corrode quickly and may develop into a major repair expense. Minor chips and scratches can be repaired with touch - up materials available from your dealer or other service outlets.
6-58 GM V ehicle Care/Appearance Materials P ART NUMBER SIZE DESCRIPTION USAGE 994954 23 in. x 25 in. Polishing Cloth – W ax Treated Exterior polishing cloth 1050172 16 oz. (0.473 L) T ar and Road Oil Remover Removes tar, road oil and asphalt 1050173 16 oz.
6-59 V ehicle Identification Number (VIN) This is the legal identifier for your vehicle. It appears on a plate in the front corner of the instrument panel, on the driver ’ s side. Y ou can see it if you look through the windshield from outside your vehicle.
6-60 Electrical System Add-On Electrical Equipment NOTICE: Don’t add anything electrical to your vehicle unless you check with your dealer first. Some electrical equipment can damage your vehicle and the damage wouldn’t be covered by your warranty .
6-61 Fuses and Circuit Br eakers The wiring circuits in your vehicle are protected from short circuits by a combination of fuses, circuit breakers and fusible thermal links. This greatly reduces the chance of fires caused by electrical problems. Look at the silver - colored band inside the fuse.
6-62 Instrument Panel Fuse Block The fuse block is on the lower portion of the instrument panel on the driver ’ s side. Fuse/Circuit Breaker Usage 1 Stop/Turn/Hazard Lamps, CHMSL, ABS 2 Radio Accy ,.
6-63 Fuse/Circuit Breaker Usage 4 DRL Relay , Instrument Panel Cluster 5 Rear Defogger 6 Cruise Module, TBC Module, Instrument Panel Cluster , Cruise Control Switch, Electrochromic Mirror 7 Power Outl.
6-64 Fuse/Cir cuit Breaker Usage 19 Instrument Panel Radio: A TC (Main Feed), 2000 Series (Standby) 20 PRNDL/Odometer , TCC Enable and PWM Solenoid, Shift A and Shift B Solenoids, 3 - 2 Downshift Sole.
6-65 Feed Usage AUX B Upfitter Battery Feed AUX A Upfitter Accessory Feed Relay Usage A/C Relay Rear Heat and Air Conditioning Upfitter - ACCY Relay Upfitter Accessory Starter Enable Relay Starter A/C.
6-66 Fuse/Cir cuit Breaker Usage HORN Horn Relay and Horn A/C COMP A/C Enable Relay and Compressor RR HTR/AC Rear Heater and A/C A TC Active T ransfer Case - L V an FR T HV AC Front Heater and A/C ENG.
6-67 Replacement Bulbs Exterior Lamps Quantity T rade No. Halogen Headlamps - Sealed Beam 2 H6054 Halogen Headlamps - Composite 2 9006 (Low Beam) Halogen Headlamps - Composite 2 9005 (High Beam) Parki.
6-68 Capacities and Specifications All capacities are approximate. When adding, be sure to fill to the appropriate level or as recommended in this manual. English and metric conversions are given. See refrigerant charge label under the hood for char ge capacity information and requirements.
6-69 Front Axle Capacity Front Axle 2.6 pint (1.2 L) . . . . . . . . . . . . . . . . . . . . . Rear Axle Capacity Rear Axle 3.5 pint (1.7 L) . . . . . .
7- 7-1 Section 7 Maintenance Schedule This section covers the maintenance required for your vehicle. Y our vehicle needs these services to retain its safety , dependability and emission control performance.
7-2 Have you pur chased the GM Pr otection Plan? The Plan supplements your new vehicle warranties. See your W arranty and Owner Assistance booklet or your dealer for details. Introduction Y our V ehicle and the Envir onment Proper vehicle maintenance not only helps to keep your vehicle in good working condition, but also helps the environment.
7-3 How This Section is Organized This maintenance schedule is divided into five parts: “Part A: Scheduled Maintenance Services” shows what to have done and how often.
7-4 Part A: Scheduled Maintenance Services Using Y our Maintenance Schedule W e at General Motors want to help you keep your vehicle in good working condition. But we don’t know exactly how you’ll drive it. Y ou may drive very short distances only a few times a week.
Scheduled Maintenance 7-5 Short T rip/City Definition Follow the Short T rip/City Scheduled Maintenance if any one of these conditions is true for your vehicle: Most trips are less than 5 to 10 miles (8 to 16 km). This is particularly important when outside temperatures are below freezing.
Scheduled Maintenance 7-6 Short T rip/City Intervals Every 60,000 Miles (100 000 km): Engine Accessory Drive Belt Inspection. Every 100,000 Miles (166 000 km): Spark Plug W ire Inspection. Spark Plug Replacement. Positive Crankcase V entilation (PCV) V alve Inspection.
Scheduled Maintenance 7-7 Long T rip/Highway Intervals Every 7,500 Miles (12 500 km): Engine Oil and Filter Change (or every 12 months, whichever occurs first). Chassis Lubrication (or every 12 months, whichever occurs first). Drive Axle Service. T ire Rotation.
Short T rip/City Scheduled Maintenance 7-8 The services shown in this schedule up to 100,000 miles (166 000 km) should be performed after 100,000 miles (166 000 km) at the same intervals. The services shown at 150,000 miles (240 000 km) should be performed at the same interval after 150,000 miles (240 000 km).
Short T rip/City Scheduled Maintenance 7-9 3,000 Miles (5 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Contr ol Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.
Short T rip/City Scheduled Maintenance 7-10 9,000 Miles (15 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Contr ol Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.
Short T rip/City Scheduled Maintenance 7-1 1 15,000 Miles (25 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Contr ol Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.
Short T rip/City Scheduled Maintenance 7-12 18,000 Miles (30 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Contr ol Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.
Short T rip/City Scheduled Maintenance 7-13 24,000 Miles (40 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Contr ol Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.
Short T rip/City Scheduled Maintenance 7-14 30,000 Miles (50 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Contr ol Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.
Short T rip/City Scheduled Maintenance 7-15 33,000 Miles (55 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Contr ol Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.
Short T rip/City Scheduled Maintenance 7-16 39,000 Miles (65 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Contr ol Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.
Short T rip/City Scheduled Maintenance 7-17 45,000 Miles (75 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Contr ol Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.
Short T rip/City Scheduled Maintenance 7-18 48,000 Miles (80 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Contr ol Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.
Short T rip/City Scheduled Maintenance 7-19 54,000 Miles (90 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Contr ol Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.
Short T rip/City Scheduled Maintenance 7-20 60,000 Miles (100 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Contr ol Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.
Short T rip/City Scheduled Maintenance 7-21 Replace engine air cleaner filter . An Emission Contr ol Service. Rotate tires. See “T ire Inspection and Rotation” in the Index for proper rotation pattern and additional information. (See footnote +.) 63,000 Miles (105 000 km) Change engine oil and filter (or every 3 months, whichever occurs first).
Short T rip/City Scheduled Maintenance 7-22 69,000 Miles (1 15 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Contr ol Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.
Short T rip/City Scheduled Maintenance 7-23 For T wo - Wheel - Drive vehicles only: Clean and repack the front wheel bearings (or at each brake relining, whichever occurs first).
Short T rip/City Scheduled Maintenance 7-24 78,000 Miles (130 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Contr ol Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.
Short T rip/City Scheduled Maintenance 7-25 84,000 Miles (140 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Contr ol Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.
Short T rip/City Scheduled Maintenance 7-26 90,000 Miles (150 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Contr ol Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.
Short T rip/City Scheduled Maintenance 7-27 93,000 Miles (155 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Contr ol Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.
Short T rip/City Scheduled Maintenance 7-28 99,000 Miles (165 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Contr ol Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.
Short T rip/City Scheduled Maintenance 7-29 150,000 Miles (240 000 km) Drain, flush and refill cooling system (or every 60 months since last service, whichever occurs first). See “Engine Coolant” in the Index for what to use. Inspect hoses. Clean radiator , condenser , pressure cap and neck.
Long T rip/Highway Scheduled Maintenance 7-30 The services shown in this schedule up to 100,000 miles (166 000 km) should be performed after 100,000 miles (166 000 km) at the same intervals. The services shown at 150,000 miles (240 000 km) should be performed at the same interval after 150,000 miles (240 000 km).
Long T rip/Highway Scheduled Maintenance 7-31 7,500 Miles (12 500 km) Change engine oil and filter (or every 12 months, whichever occurs first). An Emission Contr ol Service. Lubricate chassis components (or every 12 months, whichever occurs first). (See footnote #.
Long T rip/Highway Scheduled Maintenance 7-32 15,000 Miles (25 000 km) (Continued) – When doing frequent trailer towing. – Uses such as found in taxi, police or delivery service. If you do not use your vehicle under any of these conditions, change the fluid and filter every 50,000 miles (83 000 km).
Long T rip/Highway Scheduled Maintenance 7-33 30,000 Miles (50 000 km) Change engine oil and filter (or every 12 months, whichever occurs first). An Emission Contr ol Service. Lubricate chassis components (or every 12 months, whichever occurs first). (See footnote #.
Long T rip/Highway Scheduled Maintenance 7-34 37,500 Miles (62 500 km) Change engine oil and filter (or every 12 months, whichever occurs first). An Emission Contr ol Service. Lubricate chassis components (or every 12 months, whichever occurs first). (See footnote #.
Long T rip/Highway Scheduled Maintenance 7-35 – When doing frequent trailer towing. – Uses such as found in taxi, police or delivery service. If you do not use your vehicle under any of these conditions, change the fluid and filter every 50,000 miles (83 000 km).
Long T rip/Highway Scheduled Maintenance 7-36 60,000 Miles (100 000 km) Change engine oil and filter (or every 12 months, whichever occurs first). An Emission Contr ol Service. Lubricate chassis components (or every 12 months, whichever occurs first).
Long T rip/Highway Scheduled Maintenance 7-37 Inspect engine accessory drive belt. An Emission Contr ol Service. Replace fuel filter . An Emission Contr ol Service. (See footnote .) Replace engine air cleaner filter . An Emission Contr ol Service. 67,500 Miles (1 12 500 km) Change engine oil and filter (or every 12 months, whichever occurs first).
Long T rip/Highway Scheduled Maintenance 7-38 75,000 Miles (125 000 km) Change engine oil and filter (or every 12 months, whichever occurs first). An Emission Contr ol Service. Lubricate chassis components (or every 12 months, whichever occurs first).
Long T rip/Highway Scheduled Maintenance 7-39 82,500 Miles (137 500 km) Change engine oil and filter (or every 12 months, whichever occurs first). An Emission Contr ol Service. Lubricate chassis components (or every 12 months, whichever occurs first).
Long T rip/Highway Scheduled Maintenance 7-40 90,000 Miles (150 000 km) (Continued) Change automatic transmission fluid and filter if the vehicle is mainly driven under one or more of these conditions: – In heavy city traf fic where the outside temperature regularly reaches 90 F (32 C) or higher .
Long T rip/Highway Scheduled Maintenance 7-41 97,500 Miles (162 500 km) Change engine oil and filter (or every 12 months, whichever occurs first). An Emission Contr ol Service. Lubricate chassis components (or every 12 months, whichever occurs first).
Long T rip/Highway Scheduled Maintenance 7-42 150,000 Miles (240 000 km) Drain, flush and refill cooling system (or every 60 months since last service, whichever occurs first). See “Engine Coolant” in the Index for what to use. Inspect hoses. Clean radiator , condenser , pressure cap and neck.
7-43 Part B: Owner Checks and Services Listed in this part are owner checks and services which should be performed at the intervals specified to help ensure the safety , dependability and emission control performance of your vehicle. Be sure any necessary repairs are completed at once.
7-44 At Least T wice a Y ear Restraint System Check Make sure the safety belt reminder light and all your belts, buckles, latch plates, retractors and anchorages are working properly . Look for any other loose or damaged safety belt system parts. If you see anything that might keep a safety belt system from doing its job, have it repaired.
7-45 At Least Once a Y ear Key Lock Cylinders Service Lubricate the key lock cylinders with the lubricant specified in Part D. Body Lubrication Service Lubricate all body door hinges, the body hood, f.
7-46 Automatic T ransmission Shift Lock Control System Check CAUTION: When you are doing this check, the vehicle could move suddenly . If it does, you or others could be injured. Follow the steps below . 1. Before you start, be sure you have enough room around the vehicle.
7-47 Parking Brake and Automatic T ransmission P ARK (P) Mechanism Check CAUTION: When you are doing this check, your vehicle could begin to move. Y ou or others could be injured and pr operty could be damaged. Make sure ther e is room in fr ont of your vehicle in case it begins to roll.
7-48 Part C: Periodic Maintenance Inspections Listed in this part are inspections and services which should be performed at least twice a year (for instance, each spring and fall). Y ou should let your dealer ’ s service department or other qualified service center do these jobs.
7-49 Throttle System Inspection Inspect the throttle system for interference or binding, and for damaged or missing parts. Replace parts as needed. Replace any components that have high effort or excessive wear . Do not lubricate accelerator and cruise control cables.
7-50 Part D: Recommended Fluids and Lubricants NOTE: Fluids and lubricants identified below by name, part number or specification may be obtained from your dealer . USAGE FLUID/LUBRICANT Engine Oil Engine oil with the American Petroleum Institute Certified for Gasoline Engines starburst symbol of the proper viscosity .
7-51 USAGE FLUID/LUBRICANT Key Lock Cylinders Multi - Purpose Lubricant, Superlube (GM Part No. 12346241 or equivalent). Chassis Lubrication Chassis Lubricant (GM Part No. 12377985 or equivalent) or lubricant meeting requirements of NLGI # 2, Category LB or GC - LB.
7-52 Part E: Maintenance Record After the scheduled services are performed, record the date, odometer reading and who performed the service in the boxes provided after the maintenance interval. Any additional information from “Owner Checks and Services” or “Periodic Maintenance” can be added on the following record pages.
7-53 Maintenance Record DA TE ODOMETER READING SER VICED BY MAINTENANCE PERFORMED.
7-54 Maintenance Record DA TE ODOMETER READING SER VICED BY MAINTENANCE PERFORMED.
8- 8-1 Section 8 Customer Assistance Information Here you will find out how to contact Chevrolet if you need assistance. This section also tells you how to obtain service publications and how to report any safety defects.
8-2 Customer Satisfaction Procedur e Y our satisfaction and goodwill are important to your dealer and to Chevrolet. Normally , any concerns with the sales transaction or the operation of your vehicle will be resolved by your dealer ’ s sales or service departments.
8-3 STEP TWO -- If after contacting a member of dealership management, it appears your concern cannot be resolved by the dealership without further help, contact the Chevrolet Customer Assistance Center by calling 1-800-222-1020.
8-4 The BBB Auto Line Program is an out of court program administered by the Council of Better Business Bureaus to settle automotive disputes regarding vehicle repairs or the interpretation of the New V ehicle Limited W arranty .
8-5 From: Puerto Rico: 1-800-496-9992 (English) 1-800-496-9993 (Spanish) U.S. V irgin Islands: 1-800-496-9994 Fax Number: 313-381-0022 Canada General Motors of Canada Limited Customer Communication Ce.
8-6 Chevrolet Roadside Assistance Program T o enhance Chevrolet’ s strong commitment to customer satisfaction, Chevrolet is excited to announce the establishment of the Chevrolet Roadside Assistance Center . As the owner of a 2001 Chevrolet, membership in Roadside Assistance is free.
8-7 Chevrolet offers Courtesy T ransportation for customers needing warranty service. Courtesy T ransportation will be offered in conjunction with the coverage provided by the Bumper - to - Bumper New V ehicle Limited W arranty to eligible purchasers of 2001 Chevrolet passenger cars and light duty trucks.
8-8 Courtesy T ransportation Chevrolet has always exemplified quality and value in its offering of motor vehicles. T o enhance your ownership experience, we and our participating dealers are proud to offer Courtesy T ransportation, a customer support program for new vehicles.
8-9 Courtesy Rental V ehicle When your vehicle is unavailable due to overnight warranty repairs, your dealer may arrange to provide you with a courtesy rental vehicle or reimburse you for a rental vehicle you obtained, at actual cost, up to a maximum of $30.
8-10 REPOR TING SAFETY DEFECTS TO THE UNITED ST A TES GOVERNMENT If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway T raffic Safety Administration (NHTSA), in addition to notifying General Motors.
8-1 1 REPOR TING SAFETY DEFECTS TO GENERAL MOT ORS In addition to notifying NHTSA (or T ransport Canada) in a situation like this, we certainly hope you’ll notify us. Please call us at 1 - 800 - 222 - 1020, or write: Chevrolet Motor Division Chevrolet Customer Assistance Center P .
8-12 2001 CHEVROLET SERVICE PUBLICA TIONS ORDERING INFORMA TION The following publications covering the operation and servicing of your vehicle can be purchased by filling out the Service Publication Order Form in this book and mailing it in with your check, money order , or credit card information to Helm, Incorporated (address below .
8-13 PUBLICA TION FORM NUMBER Orders will be mailed within 10 days of receipt. Please allow adequate time for postal service. If further information is needed, write to the address shown below or call 1-800-551-4123. Material cannot be returned for credit without packing slip with return information within 30 days of delivery .
Een belangrijk punt na aankoop van elk apparaat Chevrolet 2001 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Chevrolet 2001 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Chevrolet 2001 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Chevrolet 2001 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Chevrolet 2001 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Chevrolet 2001 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Chevrolet 2001 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Chevrolet 2001 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
