Gebruiksaanwijzing /service van het product 10200 van de fabrikant Cisco Systems
Ga naar pagina of 214
Americas Headquarters Cisco Systems, In c. 170 West Tasman Drive San Jose, CA 951 34-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553-NETS (638 7) Fax: 408 527-0883 Cisco BTS 1 020 0 S of tswitc h Operations and Maintenance Guide Re lease 6.0.
THE SPECIFICATION S AND INFORMATION REGARDING TH E PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITH OUT NOTICE. ALL STATEMENTS , INFORMATION, AND RECOMMENDATI ONS IN THI S MANUAL ARE BE LIEVED TO BE A CCURATE BUT ARE PRESENTED WI THOUT WARRANTY OF ANY KIND, EX PRESS OR IMPLIED.
iii Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-06 CONTENTS Preface ix Introduction iii-ix CHAPTER 1 Starting and Shutting Down the BTS 1-1 Introduction 1-1 Me.
Contents iv Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-06 CHAPTER 3 Monitoring and Backing Up the BTS 3-1 Introduction 3-1 Detecting and Preventing BTS Conges.
Contents v Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-06 LAF Alarm Information 3-29 Moving Core Files 3-29 CHAPTER 4 Operating the BTS 4-1 Introduction 4-1 Ma.
Contents vi Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-06 POTS Application Serv er Measurements 6-22 POTS Miscellaneous FS Measurements 6-22 POTS Class of Ser.
Contents vii Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-06 Disk I/O Usage Measurements 6-78 ENUM Measurements 6-78 Diameter Mess age Counters 6-79 Single Numb.
Contents viii Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-06 Feature Configuration B-10 Subscriber-Sip-Trigger-Profile B-11 Service-Id B-11 Subscriber-Service-.
ix Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Preface Revised: February 18, 2010 , OL-16000-07 Introduction This document is t he Operation s and Maintenance Guide for the Cisco BTS 10200 Softswitch, Release 6.
x Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Preface Introduction Document Change History This table pro vides the re vision history for the Cisco BTS 10200 Softswitc h Operati ons and Maintenance Guide, Release 6.
xi Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Preface Introduction Subscribe to the What’ s New in Cisco Pr oduct Documentation as a Really Simple Syndication (RSS) feed and set content to be deliv ered directly to your deskto p using a reader applicatio n.
xii Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Preface Introduction.
CH A P T E R 1-1 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 1 Starting and Shutting Down the BTS Revised: February 18, 2010 , OL-16000-07 Introduction This chapter tells yo u ho w to start up and shut do wn the BTS.
1-2 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 1 Starting and Shutting Down the BTS Shutting Down BTS Hardware Step 2 Plug in Catalyst switch routers. Step 3 Power on EMS/BDMS host s A and B . Step 4 Power on CA/FS host s A and B .
1-3 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 1 Starting and Shutting Down the BTS Starting BTS Software Step 4 Once all componen ts start, enter nodestat to ensure proper startup.
1-4 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 1 Starting and Shutting Down the BTS Starting BTS Software.
CH A P T E R 2-1 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 2 Managing BTS Users and Commands Using EMS Revised: February 18, 2010 , OL-16000-07 Introduction This chapter describes operator interfaces to the BTS and how to manage access and users.
2-2 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 2 Managing BTS Users and Commands Usin g EMS Managing Users The “ciscouser” login is a high-le v el security logi n for T A C and other B TS support person nel that restricts access to certain commands.
2-3 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 2 Managing BTS Users a nd Commands Using EMS Managing Use rs V iewing user acti vity show ems; Chan.
2-4 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 2 Managing BTS Users and Commands Usin g EMS Managing Users Blocking an acti ve user 1. Select operation m ode: • MAINTEN ANCE—(default) for re gular maintenance • UPGRADE—for upgrades 2.
2-5 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 2 Managing BTS Users a nd Commands Using EMS Managing Commands Note All commands should be assigned to a work-gro up. If a command is not assigned to a work-group, a user will able to e xecute that com mand, which is not recommended.
2-6 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 2 Managing BTS Users and Commands Usin g EMS Adapter and Us er Security Security is an important part of the BTS 10200.
2-7 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 2 Managing BTS Users a nd Commands Using EMS Solaris OS Security and BTShard Package Solaris OS Security and BTShard Package This section details the security packages for th e B TS 10200 OS.
2-8 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 2 Managing BTS Users and Commands Usin g EMS Solaris OS Secu rity and BTShard Pac kage • The follo.
2-9 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 2 Managing BTS Users a nd Commands Using EMS Solaris OS Security and BTShard Package • IP_RESPOND_TO_ECHO_BRO ADCA ST—This opti on determines wh ether to re spond to ICMP broadcast echo requests (pin g).
2-10 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 2 Managing BTS Users and Commands Usin g EMS Solaris OS Secu rity and BTShard Pac kage – S88sendmail – S93cacheos.f inish – S99dtlogin Operator Interface Additional commands ha ve been added to manage the UNIX services in the BTS 10200.
2-11 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 2 Managing BTS Users a nd Commands Using EMS Solaris OS Security and BTShard Package Vulnerabilities in H.
2-12 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 2 Managing BTS Users and Commands Usin g EMS Sun Microsystems Configurations Pluggable Authentication Module Support The BTS 10200 deploys a Secure Sh ell (SSH) pack age with Plugg able Authentication Module (P AM) support.
2-13 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 2 Managing BTS Users a nd Commands Using EMS Sun Microsystems Configurations SUNWdfb Dumb Frame Bu.
2-14 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 2 Managing BTS Users and Commands Usin g EMS Solaris OS Patches Solaris OS Patches This chapter describes the BTS 1020 0 Solaris OS patches.
2-15 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 2 Managing BTS Users a nd Commands Using EMS Solaris OS Patches • SUNWtnfd—Utilities needed b y de velopers using TNF facilit ies.
2-16 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 2 Managing BTS Users and Commands Usin g EMS Solaris OS Patches • 108993-38—The SunO S 5.8: LD AP2 client, lib c, libthread and libnsl l ibraries patch.
CH A P T E R 3-1 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 3 Monitoring and Backing Up the BTS Revised: February 18, 2010 , OL-16000-07 Introduction This chapter includ es ov erall BTS maintenance strate gies.
3-2 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 3 Mon itoring and Backing Up the BTS Checking BTS System Health • Partit ions consumed: – A partition 70 percent consum ed generate s a minor alarm.
3-3 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 3 Monitoring and Backing Up the BTS Checking BTS System Health Using BTS System-Health Reports The BTS allo ws you to gather data and create a report on its overall state.
3-4 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 3 Mon itoring and Backing Up the BTS Checking BTS System Health Checking BTS System Time BTS clocks must be accurate to 2 s econds. Caution Do not change the date or time i n your BTS host machines while CA, FS, EMS, an d BDMS are running.
3-5 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 3 Monitoring and Backing Up the BTS Checking BTS System Health Checking Disk Mirroring on Each Host Machine Each procedure tak es about 30 minutes.
3-6 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 3 Mon itoring and Backing Up the BTS Checking BTS System Health c0t0d0s7 0 No Okay c0t1d0s7 0 No Oka.
3-7 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 3 Monitoring and Backing Up the BTS Checking BTS System Health Step 2 Enter <hostname># m etastat | grep c 0 .
3-8 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 3 Mon itoring and Backing Up the BTS Exporting Pro visioned Data Exporting Provisioned Data The CLI Nati ve Data Expo rt feature enables the e xport of all pro visioning data f rom the BTS 10200 system by the use of a CLI command.
3-9 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 3 Monitoring and Backing Up the BTS Exporting Provisioned Data ######################### add clli_code ID=ABCD1234567; ########################## ##### Add call_agent ##### ########################## add call_agent id=CA146;tsap_addr=CA146.
3-10 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 3 Mon itoring and Backing Up the BTS Exporting Pro visioned Data ##################################.
3-11 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 3 Monitoring and Backing Up the BTS Exporting Provisioned Data – Non-Nati ve = Y/N T o generate .
3-12 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 3 Mon itoring and Backing Up the BTS Exporting Pro visioned Data Creating Reports for Rural Prim ar.
3-13 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 3 Monitoring and Backing Up the BTS Exporting Provisioned Data • The Rural Primary Carrier (U2 f.
3-14 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 3 Mon itoring and Backing Up the BTS Exporting Pro visioned Data T able 3-6 NRUF Report Data f o r .
3-15 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 3 Monitoring and Backing Up the BTS Exporting Provisioned Data Backing Up the Software Image T o back up the software image do the fo llowi ng three procedures: 1.
3-16 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 3 Mon itoring and Backing Up the BTS Exporting Pro visioned Data Full Database Auditing Step 1 Log in as CLI user on EMS side A. Step 2 Enter audit databas e type=full; .
3-17 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 3 Monitoring and Backing Up the BTS Exporting Provisioned Data The result should match the foll owing : All tables are OK. For detail, see ain_tiat.out Caution If the result is not“ All tables a re OK”, stop and contact Cisco T A C.
3-18 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 3 Mon itoring and Backing Up the BTS Exporting Pro visioned Data Caution If the result is not“ All tables are OK ”, stop and contact Cisco T A C.
3-19 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 3 Monitoring and Backing Up the BTS Exporting Provisioned Data /opt/OptiCall/FSAINxxx/bin/data /op.
3-20 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 3 Mon itoring and Backing Up the BTS Exporting Pro visioned Data <hostname>#flarcreate -n <hostname> -X /tmp/excluded_dir -c /mnt/<hostname>.
3-21 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 3 Monitoring and Backing Up the BTS Exporting Provisioned Data c. Optional: Enable the ora_ arch_backup.ksh process. d. Log in as oracle , or su - or acle .
3-22 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 3 Mon itoring and Backing Up the BTS Exporting Pro visioned Data Step 2 Schedule the FTP process. a. Do this on the primary and secondary EMSs: Log in as oracle , or su – or acle and enter the follo wing command: crontab –e b.
3-23 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 3 Monitoring and Backing Up the BTS Exporting Provisioned Data # su - oracle $ cd /opt/orahome/.ssh $ sftp root@priems sftp> cd /opt/orahome/.ssh sftp> get id_rsa* sftp> quit $ ls -l /opt/orahome/.
3-24 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 3 Mon itoring and Backing Up the BTS Archiving Your Datab ase -rw-------1 ora oragrp394 Mar 10 16:48 id_rsa.pub Step 6 Sftp the "id_rsa" and "id_rsa.
3-25 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 3 Monitoring and Backing Up the BTS Archiving Your Database Step 6 Restore the Solaris “ date ” command to create the system Flash Archiv e. Enter: mv /bin/date /bin/date.
3-26 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 3 Mon itoring and Backing Up the BTS Log Archive Facility (LAF) Step 1 Log in as root on the activ e CA. Step 2 Enter m ore /etc/r esolv .conf. Note nameserver <i p address> Step 3 Enter nslookup This defaults to t he first DNS server .
3-27 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 3 Monitoring and Backing Up the BTS Log Archive Facility (LAF) Other Capabilities This section lists the ad ditional capabilities of the LAF pro cess.
3-28 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 3 Mon itoring and Backing Up the BTS Log Archive Facility (LAF) The steps to set up the authorizat .
3-29 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 3 Monitoring and Backing Up the BTS Moving Core Files Adding Static Routes T o add static routes t.
3-30 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 3 Mon itoring and Backing Up the BTS Moving Core Files The BTS automatically removes these core f iles wh en di sk space is critically lo w or the core file has aged beyond a maximum allo wable time.
CH A P T E R 4-1 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 4 Operating the BTS Revised: February 18, 2010 , OL-16000-07 Introduction This chapter tel ls you ho w to operate the BTS. Th is chapter assumes the follo wing are true: • Connecting compo nents hav e been correctly inst alled.
4-2 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 4 Ope rating the BTS Managing Subscrib ers Managing Subscribers T able 4-1 Managing Sub scr ibers T .
4-3 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 4 Operating the BTS Managing Subscribe rs Vi e w i n g subscribers voice mail indicator (VMI) status status subscriber ID=278-222-1917 Note Fo r MGCP subscr ibers only .
4-4 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 4 Ope rating the BTS Managing Subscrib ers Changing subscribers announcements Delete the changed-number entry . delete changed-number old-DN=<old-DN>; Change the status of the old DN to DISC in the dn2subscriber t able.
4-5 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 4 Operating the BTS Managing Subscribe rs Changing subscribers DNs Change the s ubscriber DN t o the ne w DN.
4-6 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 4 Ope rating the BTS Viewing Calls Viewing Calls These tasks allo ws you to vie w informat ion related to call forwarding features.
4-7 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 4 Operating the BTS Using Status and Control Commands Using Status and Control Commands T able 4-3 .
4-8 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 4 Ope rating the BTS Using Status and Co ntrol Commands Changing s tates of component pairs (EMS, BD.
4-9 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 4 Operating the BTS Using Show and Change Commmand s Using Show and Change Commmands Using ERAC Commands Using prepared SQL statements Extended Read Access Commands (ERA C) commands perform a complex read against the BTS data base.
4-10 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 4 Ope rating the BTS Using ERAC Commands These are st andard commands and their paramet ers. Se veral are associated with BTS tables. H owe ver , se veral parameters are deri ved from multiple sources and do not map di rectly to a table.
4-11 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 4 Operating the BTS Using ERAC Commands V iew ing speed dial settings b y DN This command returns a list of all speed dial telephone numbers by the specif ied DN or primary subscri ber dir ectory number .
4-12 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 4 Ope rating the BTS Managing Tran sactions Managing Transactions The T ransaction Queue tracks updates to EMS data base, an d the shared memory of the CAs andFSs.
4-13 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 4 Operating the BTS Scheduling Commands Scheduling Commands The Hour and Minute Command Sched uling feature allo ws you to schedule command e xecution for a specific hour and minute.
4-14 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 4 Ope rating the BTS Scheduling Comman ds V ie wing scheduled commands show scheduled_command recur.
CH A P T E R 5-1 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 5 Managing External Resources Revised: February 18, 2010 , OL-16000-07 Introduction This chapter tells yo u how t o manage external re sources provisioned on the BTS usi ng administr ativ e (ADM) commands.
5-2 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 5 Managing External Resources Viewing BTS System-Wid e Status T able 5-1 Using BTSS T A T T ask Samp.
5-3 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 5 Managing Exte rnal Resources Managing Trunk Gro ups and Trunks Managing Trunk Groups and Trunks T.
5-4 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 5 Managing External Resources Managing Trun k Groups and Tr unks Resetting trunks reset trunk-termin.
5-5 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 5 Managing Exte rnal Resources Managing Trunk Gro ups and Trunks V ie wing test menus SS7 trunks di.
5-6 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 5 Managing External Resources Managing Trun k Groups and Tr unks T esting trunks (place in MAINT sta.
5-7 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 5 Managing Exte rnal Resources Managing Trunk Gro ups and Trunks If a TG or trunk command fails, it can return one of th e following generic failure reasons, as well as ones specific to the command.
5-8 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 5 Managing External Resources Managing Trun k Groups and Tr unks any Failure • Found no fai lure .
5-9 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 5 Managing Exte rnal Resources Managing Trunk Gro ups and Trunks T runk T ermination commands Fail .
5-10 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 5 Managing External Resources Managing Trun k Groups and Tr unks T runk commands Fail ur e • NON-F A UL TY—Not block ed, av ailable for service. • MAINT -OOS—T runk-termination i s manually controlled OOS.
5-11 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 5 Managing Exte rnal Resources Managing Trunk Gro ups and Trunks SS7 trunk commands Fail ur e • ACT_LOC_INIT_RESET—Rese t circuit at startup. • ACT_LOC_MML_RESET—Craft reset request.
5-12 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 5 Managing External Resources Managing Subscriber Terminations Managing Subscriber Terminations T a.
5-13 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 5 Managing Exte rnal Resources Managing Subscriber Terminations If a subscriber ter mination command fa ils, it can retu rn one of the follo wing generic failure reasons, as well as ones specific to the command.
5-14 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 5 Managing External Resources Managing Subscriber Terminations T able 5-6 Understanding Subscr iber.
5-15 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 5 Managing Exte rnal Resources Managing Subscriber Terminations Any fai lure • Found no fai lure, subscriber categ ory in valid, entity un equipped in initial state, unk nown failure reason(s) .
5-16 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 5 Managing External Resources Managing Gateways Managing Gateways T able 5-7 Managin g Gatew ays T ask Sample Command V iewing H.
5-17 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 5 Managing Exte rnal Resources Managing Gateways If a gatew ay command fails, you might recei ve one of the following generic f ailure reasons, or one specific to the command.
5-18 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 5 Managing External Resources Managing Other External Resources Managing Other External Resources T.
5-19 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 5 Managing Exte rnal Resources Managing Other E xternal Resources Sho ws all CMTS (Aggr-ID) that are n ot referred b y any Subnet.
5-20 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 5 Managing External Resources Learning Externa l Resource Dependencies Learning External Resource Dependencies Ensuring billing serv er receiv es Call Detail Bloc ks (CDBs) 1.
5-21 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 5 Managing Exte rnal Resources Learning External Resource Dependenc ies This table lists the admini strativ e states BTS returns.
5-22 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 5 Managing External Resources Learning Externa l Resource Dependencies Note If a call termination a.
5-23 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 5 Managing Exte rnal Resources Learning External Resource Dependenc ies UNREA CHABLE • The termination is unreachable. • This oc curs when MG W K EEP ALIVE declares an MGW unreacha ble.
5-24 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 5 Managing External Resources Learning Externa l Resource Dependencies Source Token Figure 5-1 Admi.
5-25 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 5 Managing Exte rnal Resources Learning External Resource Dependenc ies Figure 5-2 Administr ative.
5-26 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 5 Managing External Resources Learning Externa l Resource Dependencies Figure 5-3 ISDN Administrati.
5-27 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 5 Managing Exte rnal Resources Learning External Resource Dependenc ies 52079 P_OOS = Place out of.
5-28 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 5 Managing External Resources GigE Support GigE Support The purpose of implementing the GigE Support Feature pro visioning is to increase the bandwidth between the net work switches and th e Cisco BTS 10200 from 100 Mbps to 1000 Mbps.
5-29 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 5 Managing Exte rnal Resources Provisioning the GigE In terface shut no shut Step 5 Sav e the switch conf iguration. Step 6 Reboot the Cisco BTS 10200 host using the shutdown -g0 -y -i6 command.
5-30 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 5 Managing External Resources Provisioning the GigE Interface.
CH A P T E R 6-1 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 6 Using BTS Measurements Revised: February 18, 2010 , OL-16000-07 Introduction This chapter describes BTS traff ic measurements and tells you how to use them.
6-2 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 6 Using BTS Measu rements Learning the Measur ement Types SIP_TO T AL_INCOMING_MSG and SIP_TO T AL_SUCCESS_INCOMING_MSG Learning the Measurement Types These tables list the dif ferent m easurement types the BTS collects.
6-3 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 6 Using BTS Measur ements Learning the Measureme nt Types ISDN_CALL_PR O CEED_RX ISDN CALL PR OCEED messages received. ISDN_CALL_PR OCEED_TX ISDN CALL PR OCEED messa ges sent from the reporting CA.
6-4 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 6 Using BTS Measu rements Learning the Measur ement Types ISDN_SETUP_A CK_RX ISDN SETUP A CK messages recei ved. ISDN_SETUP_A CK_TX ISDN SETUP A CK me ssages sent from the reporting CA.
6-5 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 6 Using BTS Measur ements Learning the Measureme nt Types Call Processing Measurements T able 6-3 C.
6-6 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 6 Using BTS Measu rements Learning the Measur ement Types CALLP_H323_TERM_A TTM P T ermina ting H323 call attempts. CALLP_H323_TERM_F AIL T erminating H323 call attempts that fa iled.
6-7 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 6 Using BTS Measur ements Learning the Measureme nt Types CALLP_LNP_SND_MISR OUTED_ POR TED Misrouted calls to a p orted numb er detected after an LNP query .
6-8 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 6 Using BTS Measu rements Learning the Measur ement Types CALLP_MGCP_SS7_CALL Successfully completed calls from an MGCP orig inator to an SS7 terminator .
6-9 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 6 Using BTS Measur ements Learning the Measureme nt Types CALLP_OHD_DIAL TONE_TIMEO UT T imes the of f hook delay trigger timed out. CALLP_OLM _ A CCEPT Calls accepte d by OLM.
6-10 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 6 Using BTS Measu rements Learning the Measur ement Types CALLP_SIP_ORIG_CA LL_NO T_A NS This counter is pegged when the incoming call is not answered by the called party .
6-11 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 6 Using BTS Measur ements Learning the Measureme nt Types CALLP_SS7_TERM_A TTM P SS7 te rminating call attempt s. CALLP_SS7_TERM_F AIL SS7 terminating call attempts that f ailed.
6-12 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 6 Using BTS Measu rements Learning the Measur ement Types MGCP Adapter Measurements T able 6-4 MGCP.
6-13 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 6 Using BTS Measur ements Learning the Measureme nt Types DQoS Measurements SIP Measurements This table lists measurements for th e Session Initiation Protocol (SIP).
6-14 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 6 Using BTS Measu rements Learning the Measur ement Types SIS_7xx_RX 7xx class (RESER V ED) messa ges the reporting CA or FS receiv ed. SIS_7xx_TX 7xx class (RESER VED) messages the reporting CA or FS sent.
6-15 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 6 Using BTS Measur ements Learning the Measureme nt Types SIS_SUBSCRIBE_TX SIP SUBSCRIBE messa ges the reporting CA or FS sent .
6-16 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 6 Using BTS Measu rements Learning the Measur ement Types Service Interaction Manager Measurements .
6-17 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 6 Using BTS Measur ements Learning the Measureme nt Types PO TS_CCW_LENGTH Subscriber -seconds that Cancel Call W AITING was acti ve on the repo rting FS.
6-18 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 6 Using BTS Measu rements Learning the Measur ement Types PO TS_CFU_A CT_ANSWERED Call Fo rward Uncondition al acti v ation attempts answered by the called party on the reporting FS.
6-19 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 6 Using BTS Measur ements Learning the Measureme nt Types PO TS_CW_A TTMP Call W aiting service instance at tempts on the reporting FS.
6-20 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 6 Using BTS Measu rements Learning the Measur ement Types PO TS_EXT _CN A M_QUER Y CN AM translation queries that resu lted in an extern al query to a network database attempted on the reporting F S.
6-21 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 6 Using BTS Measur ements Learning the Measureme nt Types PO TS_RACF_PIN_REJECT_NO_RSRC Remote Acti va tion Call Fo r ward PIN input at tempts refused due to a lack of resources on the reporting FS.
6-22 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 6 Using BTS Measu rements Learning the Measur ement Types POTS Application Server Measurements POTS.
6-23 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 6 Using BTS Measur ements Learning the Measureme nt Types PO TS_HOTV_A TTMP Succe ssful Hotline V ariab le instance attempts o n the reportin g FS. PO TS_HOTV_DEA CT_SUCC Successful Hotline V ariable deacti vati on attempts on the reportin g FS.
6-24 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 6 Using BTS Measu rements Learning the Measur ement Types POTS Class of Service FS Measurements T a.
6-25 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 6 Using BTS Measur ements Learning the Measureme nt Types POTS Screen List Editing FS Measurements.
6-26 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 6 Using BTS Measu rements Learning the Measur ement Types POTS Automatic Callback, Recall, and Call.
6-27 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 6 Using BTS Measur ements Learning the Measureme nt Types PO TS_AR _DELA YED_PR OC Automatic Recall service activ atio n attempts that resulted in delayed connection on the reporting FS.
6-28 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 6 Using BTS Measu rements Learning the Measur ement Types POTS Limited Call Duration (Prepaid/Postp.
6-29 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 6 Using BTS Measur ements Learning the Measureme nt Types AIN Services FS Measurements T able 6-17.
6-30 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 6 Using BTS Measu rements Learning the Measur ement Types AINSVC_LOC_8XX_ANI_BLOCK 8XX translation queries b l ocked due to ANI screening processed local ly on the reporting FS.
6-31 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 6 Using BTS Measur ements Learning the Measureme nt Types SCCP Protocol Measurements T able 6-18 S.
6-32 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 6 Using BTS Measu rements Learning the Measur ement Types SCCP_TO T AL_LOCAL_MSG Messages intended for local subsystems on the reporting FS. SCCP_TO T AL_LONG_UD A T A_ RX Long unit data receiv ed on the reporting FS.
6-33 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 6 Using BTS Measur ements Learning the Measureme nt Types TCAP Protocol Measurements T able 6- 19 .
6-34 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 6 Using BTS Measu rements Learning the Measur ement Types TCAP_DIALOG_CONFIRM_RX Dialog confirm messages receiv ed on the reporting FS. TCAP_DUP_INV OKE_ID_RX Duplicate in voke ids recei ved on the reporting FS .
6-35 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 6 Using BTS Measur ements Learning the Measureme nt Types TCAP_OPEN_CONFIRM_RX O pen confirm me ssages receiv ed on the reporting FS. TCAP_OPEN_IND_RX Ope n indication messages receiv ed on the reporting FS.
6-36 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 6 Using BTS Measu rements Learning the Measur ement Types TCAP_UNEXPECT_ERR_CODE_ TX Unexpected error codes on return -error sent b y the reporting FS.
6-37 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 6 Using BTS Measur ements Learning the Measureme nt Types SUA Measurements T able 6-20 SU A Measur.
6-38 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 6 Using BTS Measu rements Learning the Measur ement Types SU A _PR OT OCOL_ERR Protocol errors on the rep orting signali ng gatew ay process. SU A_R OUTING_CONTEXT_ERR Rout ing conte xt errors on the rep orting signaling g ate way process.
6-39 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 6 Using BTS Measur ements Learning the Measureme nt Types M3UA Protocol Measurements T able 6-21 M.
6-40 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 6 Using BTS Measu rements Learning the Measur ement Types M3U A_R OUTING_CONTEXT_ERR Routing context error s on the reporting signaling ga tew ay process.
6-41 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 6 Using BTS Measur ements Learning the Measureme nt Types SCTP Measurements T able 6-22 SCTP Measu.
6-42 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 6 Using BTS Measu rements Learning the Measur ement Types SCTP_INV ALID_P ARAM_ ERR_RX T imes an SC.
6-43 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 6 Using BTS Measur ements Learning the Measureme nt Types SCTP_UNRECOG_CHUN K_ERR_RX T imes an SCTP peer reported that it r ecei ved a chunk that it could not understand on the reporting sctp associati on.
6-44 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 6 Using BTS Measu rements Learning the Measur ement Types IUA Measurements T able 6- 23 IU A Measur ements Measurement Description IU A_ACTIVE_A CK_RX ASP_A C TIVE_A CK messages receiv ed on the reporting SCTP associat ion.
6-45 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 6 Using BTS Measur ements Learning the Measureme nt Types IU A_M SG_O THER_ ERR Other message errors on the reporting SCTP associat ion. IU A_MSG_TYPE_ERR Unsupported message type er rors on the reporting SCTP association.
6-46 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 6 Using BTS Measu rements Learning the Measur ement Types ISUP Measurements I T able 6-24 ISUP Pr otoc ol Measur ements ISUP_ABNORMAL_REL_RX Release messa ges recei ved with a cause other th an NORMAL on the reporting trunk group.
6-47 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 6 Using BTS Measur ements Learning the Measureme nt Types ISUP_CO T_TX C ontinuity messag es sent on the re porting trunk group. ISUP_CPG_RX C all Progress messages re cei ved on the reporting trunk group.
6-48 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 6 Using BTS Measu rements Learning the Measur ement Types ISUP_IAM_RX Initial Address messages recei ved on th e reporting trunk group. ISUP_IAM_TX Initial Address messages sent on the reporti ng trunk group.
6-49 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 6 Using BTS Measur ements Learning the Measureme nt Types The follo wing table illustrates the mes.
6-50 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 6 Using BTS Measu rements Learning the Measur ement Types CGU A X X X X X X X X X X X X CON X X X X.
6-51 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 6 Using BTS Measur ements Learning the Measureme nt Types UBL X X X X X X X X X X X UCIC X X X X U.
6-52 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 6 Using BTS Measu rements Learning the Measur ement Types ISUP (ANSI) Measurements T able 6- 26 ISU.
6-53 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 6 Using BTS Measur ements Learning the Measureme nt Types SGA_CVR_TX CVR messages sent on the reportin g trunk group. SGA_CVT_RX CVT messages recei ved on the reporting trunk group.
6-54 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 6 Using BTS Measu rements Learning the Measur ement Types SGA_UB A_RX UB A messages receiv ed on the reporting tr unk group. SGA_UBA_TX UBA messages sent on the reporting t runk group.
6-55 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 6 Using BTS Measur ements Learning the Measureme nt Types ISUP (France) Measurements ISUP (Poland).
6-56 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 6 Using BTS Measu rements Learning the Measur ement Types SGA_CGB A_RX CGBA message s receiv ed on the reporting trunk group. SGA_CGB A_TX CGB A messages sent on the reporting t runk group.
6-57 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 6 Using BTS Measur ements Learning the Measureme nt Types SGA_SUS_TX SUS messag es sent on the reporting trunk gro up. SGA_UB A_RX UBA messages recei ved on the repo rting trunk group.
6-58 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 6 Using BTS Measu rements Learning the Measur ement Types ISUP (ITU-Mexico) Measurements T able 6- .
6-59 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 6 Using BTS Measur ements Learning the Measureme nt Types SGA_GRA_RX GRA messages receiv ed on the reporting trun k group. SGA_GRA_TX GRA messages sent on the reporting trunk group.
6-60 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 6 Using BTS Measu rements Learning the Measur ement Types ISUP (ITU-HongKong) Measurements T able 6.
6-61 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 6 Using BTS Measur ements Learning the Measureme nt Types SGA_INF_RX INF messages recei ved on the reporting t runk group. SGA_INF_TX INF messages se nt on the reporti ng trunk group.
6-62 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 6 Using BTS Measu rements Learning the Measur ement Types Audit Measurements SIP Interface Adapter .
6-63 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 6 Using BTS Measur ements Learning the Measureme nt Types SIA_MWI_NO TIFY _RX SIP Notify MWIs received from SIP subscribers. SIA_MWI_NO TIFY_TX SIP Notify MWIs sent to SIP phones.
6-64 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 6 Using BTS Measu rements Learning the Measur ement Types Call Detail Block Measurements T able 6- .
6-65 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 6 Using BTS Measur ements Learning the Measureme nt Types BILLING_T OT AL_OP CDBs of type cut o p .
6-66 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 6 Using BTS Measu rements Learning the Measur ement Types Event Messaging Measurements Dynamic QoS .
6-67 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 6 Using BTS Measur ements Learning the Measureme nt Types PCMM Measurements SNMP Protocol Measurem.
6-68 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 6 Using BTS Measu rements Learning the Measur ement Types Trunk Group Usage Measurements T able 6-3.
6-69 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 6 Using BTS Measur ements Learning the Measureme nt Types TRKGRP_OUTBOUND_F AIL T imes the system .
6-70 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 6 Using BTS Measu rements Learning the Measur ement Types TRKGRP_SIP_4xx_TX Number of 4xx class (REQUEST F AILURES) messages the reporting call agent transmitted on a SIP trunk group.
6-71 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 6 Using BTS Measur ements Learning the Measureme nt Types Announcement Measurements H.
6-72 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 6 Using BTS Measu rements Learning the Measur ement Types H323_ALER T_TX H323 ALE R Ts transmitted H323_ALER T_F AIL H323 ALER Ts that failed.
6-73 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 6 Using BTS Measur ements Learning the Measureme nt Types H323_NO TIFY_TX H323 NO TIFYs transmitted H323_NO TIFY_F AIL H323 NOTIFY s that failed.
6-74 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 6 Using BTS Measu rements Learning the Measur ement Types H323_UCF_TX H323 UCFs transmitted H323_UR.
6-75 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 6 Using BTS Measur ements Learning the Measureme nt Types Call Tools Measurements AIN Tools Measur.
6-76 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 6 Using BTS Measu rements Learning the Measur ement Types CPU Usage Measurements Memory Usage Measu.
6-77 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 6 Using BTS Measur ements Learning the Measureme nt Types DISK_USA GE_TO T AL_A V AILABLE blocks on f ile system. DISK_USA GE_TO T AL_USED used blocks.
6-78 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 6 Using BTS Measu rements Learning the Measur ement Types System Load Usage Measurements Disk I/O U.
6-79 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 6 Using BTS Measur ements Learning the Measureme nt Types Diameter Message Counters The BTS 10200 keeps counters for both base Diamet er messages and Sh Diameter me ssages.
6-80 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 6 Using BTS Measu rements Learning the Measur ement Types Single Number Reach Counters T able 6-52 lists Single Number Reach counters. These co unters are ke pt on a BTS 10200 system-wide basis rather than fo r e ach subscriber .
CH A P T E R 7-1 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 7 Using the BTS SNMP Agent Revised: February 18, 2010 , OL-16000-07 Introduction This chapter e xplains ho w to use the Simple Network Management Prot ocol (SNMP) agent.
7-2 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 7 Using the BTS SNMP Agent Viewing SNMP Trap Reports Viewing SNMP Trap Reports The SNMP agent sends traps to the NMS; eac h trap maps to an EMS alarm. Alarms not mapped to a specific trap map to a generic trap.
7-3 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 7 Using the BTS SNMP Agen t Viewing SNMP Trap Reports T able 7 -2 Receiving T rap Repor ts T ask Op.
7-4 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 7 Using the BTS SNMP Agent Viewing and Mana ging BTS Components Viewing and Managing BTS Components .
7-5 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 7 Using the BTS SNMP Agen t Viewing and Ma naging BTS Components Changing setting s on BTS components 1. SET necessary fields ( Mode colu mn, T argetState column, etc).
7-6 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 7 Using the BTS SNMP Agent Querying the SNMP Ag ent Querying the SNMP Agent Enabling NMS to Query/Po.
7-7 Cisco BTS 10200 Softswitch Operations and Ma intenance Guide, Release 6.0. x OL-16000-07 Chapter 7 Using the BTS SNMP Agen t Enabling NM S to Query/Poll Solaris SN MP Agent The activ e EMS node ru.
7-8 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Chapter 7 Using the BTS SNMP Agent Enabling NMS to Que ry/ Poll Solaris SNMP Agent.
A-1 Cisco BTS 10200 Softswitch Operations and Mainten ance Guide, Release 6.0.x OL-16000-07 APPENDIX A Feature Tones Revised: February 18, 2010 , OL-16000-07 Introduction This appendix e xplains special tones the BTS supports for subscriber an d operator features.
A-2 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Appendix A Feature Tones Tones per Feat ure CW CIDCW CW TONE If called party has MDN feature: primary D N matched. If called party is i n Centrex system with D ACWI: there is no e x tension for the number dialed .
A-3 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Appendix A Feature Tones Tones per Feature CFU-A CT STUTT ER TONE The subscriber has su ccessful activ ated CFU from the handset. DIAL TONE The subscriber has dialed the CFU- A CT star code , and the BTS is ready to recei ve digits for the forw ard-to DN.
A-4 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Appendix A Feature Tones Tones per Feat ure CNDB CN AB CIDB CIDS DIAL TONE The subscriber h as dialed the star co de for the identity blocking feature, and the BTS is ready to receiv e digits for the DN to be called.
A-5 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Appendix A Feature Tones Tones per Feature DPU STUTT ER TONE The subscriber has dialed DPU access code, and DPU access has been granted.
A-6 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Appendix A Feature Tones Tone Frequencies and Cadences Tone Frequencies and Cadences T ones are requested by the BTS and deliv ered to th e subscriber or operator by the MGW .
A-7 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Appendix A Feature Tones Tone Frequencies and Cadences Ta b l e A - 3 lists the maintenance tones used for continuity testing. See th e T elcordia document GR-317-CORE for addi tional details.
A-8 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Appendix A Feature Tones Tone Frequencies and Cadences.
B-1 Cisco BTS 10200 Softswitch Operations and Mainten ance Guide, Release 6.0.x OL-16000-07 APPENDIX B FIM/XML Revised: February 18, 2010 , OL-16000-07 This appendix describes the FIM/XML feat ure for Release 6.0.1 of the Cisco BTS 10 200 Softswitch and explains ho w to use it.
B-2 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Appendix B FIM /XML Tool Requiremen ts • Specify the precedence orde r for the external features • Defin.
B-3 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Appendix B FIM/XML Writing an External FIM/XML File • The service provider or operator has write permis sion for the directory where the FIM/XML of fline tool is located.
B-4 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Appendix B FIM /XML Defining Features Define Element The properties of the external feature are config ured in the Define Element. The FIM/XML tool processes the e xternal FIM/XML f ile in the Def ine Element.
B-5 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Appendix B FIM/XML Defining Features Inhibit Others Element The Inhibit Ot hers Eleme nt tag defines the list of features that are inhibi ted wh en a giv en feature is in an Assigned or In voked state.
B-6 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Appendix B FIM /XML Defining Features Error The list of error elements is matched o ne by one to s ee if the error response recei ved during the external feature in vocation f alls within its specif ied range.
B-7 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Appendix B FIM/XML Installing the FIM /XML File Using the Offline FIM/XML Tool Installing the FIM/XML File Using the Offline FIM/XML Tool Each Cisco BTS 10200 release includes an original FI M/XML f ile that is installed during system setup and upgrades .
B-8 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Appendix B FIM /XML Installing the FIM/XML File Using the Offline FIM/XML Tool Step 6 Run the follo wing Jav a application: java —jar fimxml.
B-9 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Appendix B FIM/XML FIM/XML File an d Shared iFC File FIM/XML File and Shared iFC File A Shared Initial Filter Criteria (iFC) f ile specifies all the data r equired to pro vision a ne w feature in the Element Management System (EMS).
B-10 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Appendix B FIM /XML Provisioning iFC Provisioning iFC T o enabl e the operator to provision iFC (s ) through the XML file, the service provider m ust generat e and install the n ew XML f ile (Shared iF C file).
B-11 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Appendix B FIM/XML Feature Restricti ons and Limitation s Subscriber-Sip-Trigger-Profile This command adds the Subscriber -Sip-T rigger-Prof ile.
B-12 Cisco BTS 10200 Softswitch Operations a nd Maintenance Guide, Release 6.0.x OL-16000-07 Appendix B FIM /XML Feature Restrictions and Limitations.
Een belangrijk punt na aankoop van elk apparaat Cisco Systems 10200 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Cisco Systems 10200 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Cisco Systems 10200 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Cisco Systems 10200 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Cisco Systems 10200 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Cisco Systems 10200 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Cisco Systems 10200 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Cisco Systems 10200 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
