Gebruiksaanwijzing /service van het product PROTECT A. 500 van de fabrikant AEG
Ga naar pagina of 32
UPS OPER ATING INSTRUCTIO NS PROTECT A . 500 PROTECT A . 700 PROTECT A..
2.
3 Thank you for deciding to purchas e the PROTECT A. UPS from AE G Pow er Solutions. The following safety instr uctions are an important part of the operating instruction s are will protect you against problems from operating errors and possible dangers.
4 1 Notes on these Operating Instructions Duty to provide information These operating instructions will help you to ins tall and operate the U ninterruptible Power Supply (UPS) , PROTECT A. 500 or PROT ECT A. 700 - ref erred to as PROTECT A. in this document - safely a nd properly, and for its inten ded purpose.
5 obligations such as warra nty agreements, service c ontracts, etc. entered into by AEG or its re presentatives w ithout prior notice in the event of maintenance and repair work being carried out with anything other than original AEG parts or spare parts purchas ed from AEG.
6 Table of Contents 1 Notes on these Operat ing Instr uctions ................................ 4 2 System Overview ................................................................ 7 2.1 Brief Overview ..................................................
7 2 System O v er view i PR OTEC T A. is an u ninte rrup ti ble p owe r s up ply (UPS ) for e ssen tial l oad s suc h as PC s, work- sta tion s, relat ively sma ll -scal e tel eco mmuni cati on equ ipmen t a nd si milar dev ice s.
8 Inverter Battery Rectifier Load Mains Line filter A. V. R. ~ ~ ♦ Overvoltage protect ion (RJ11) for fax , modem and phone ♦ CompuW atch software for s hutdown, status m essages and measurem ent values for all m ajor operating systems (incl. W indows, Mac, Li nux) ♦ Compact design / without fan 2.
9 The static bypass switch is activate d in the event of a mains failure. The inverter then tak es over the voltage s upply of the connected loads, in or der to pre vent the risk of data loss or damage to the lo ads. PRO TECT A. supplies voltage until the battery is dischar ged or your IT s y stem has been shut do wn and switched of f properl y.
10 3 Safety 3.1 General Safety Instructions Read these operatin g instructions c arefully prior to commiss ioning of the PROT ECT A. UPS an d observe the safety instructions! Only us e the unit if it .
11 The outp ut m ay be live, e ven if th e UP S is not connected to the mains suppl y, as the UPS has its own internal po wer suppl y (battery)! For health a nd safet y re asons, the unit m ust be earthed correctl y! PROTECT A.
12 ♦ Condensation m ay occur if the U PS is brought f rom a cold environm ent into the room where it is to be installed. The U PS must be absol utely dry prior to start - up.
13 W hen replacing the battery, the f ollowing mus t be observed: Only ever use an iden tical, m aintenance-free s ealed lead battery with the sam e data as the original batter y. Danger! Explosive ! Never throw b atteries into open fire. Never open or dam age batteries.
14 3.3 CE Certificate.
15 3.4 Technical Data Type rating PROTECT A. 500 500 VA / 300 W PROTECT A. 700 700 VA / 420 W UPS input Nominal connecti on voltage 220 / 230 / 240 Vac Voltage range with out batter y 170 Vac to 280 V.
16 Charging tim e (to 90 % of rated capacit y) 8 h T y pe Sealed, m aintenance-free PROTECT A. 500 Block batter y 12 V / 7 Ah e.g. CSB, type G P1272F2 3- 5 y e a r s ac c . t o E UR OB A T Yuasa, type NP7- 12D Connection plug 6.3 mm Panasonic, t ype LC-R127R2P (Fas ton 250) PROTECT A.
17 Directives The PROT ECT A. meets th e product standard EN 50091. The CE m ark on the unit confirm s compliance with the EC outline directives f or 73/23 EEC – L ow voltage and f or 89/336 EEC – Electrom agnetic com patibility if the instal lation instructions describ ed in the oper ating instructions are observed.
18 Check the content is complete: ♦ PROTECT A. with 500 or 7 00 VA ♦ Mains connectio n cable with shock proof plug acc. to CEE 7/7 Second m ains connection cable with UK plug acc.
19 4.3 Connections, Operating and Display Elements Front Rear 1 Main switch of the UPS (mains switch) 2 LED displa y s: Green LED: Mains/norm al operation Yellow LED: Battery operation Red LED: W arni.
20 5 Inst allation and Operation 5.1 Check Remove the UPS from its transport pac kaging a nd ch eck that it has not been dam aged in transit. If you f ind an y d amage, pack the unit up again and send i t back to where you purchased it.
21 5.3 Charging The PROTECT A. is supplied with its battery fully charged. Nevertheless, energ y m ay have been lost during trans port, s o the batter y should be full y recharged befor e it is used for the first time. Con ne ct the inpu t of the UPS (no.
22 i Note that the additional output sock et identified in white has a special pr operty (chapter 4.3 / n o. 6 / pg.19). This is alwa y s live irrespec tive of the other outputs. It is not back ed up b y the U PS, nor c an it be s witched of f using the main switch of the UPS.
23 i The interfaces are mutuall y exc lusive. T here is no provision for simultaneous operation of RS232 and USB. 5.7 Operation Once you have co nnected the UPS to a suitabl e m ains connection, you can start operation using the UPS main switch. Switching O N and OFF: To switch on, pres s the main switch on the f ront of the UPS (chapter 4.
24 The connected lo ads are powered using th e m onitored and filtered m ains voltage, which is additionall y st abilised by the integrated A .V.R. contr ol u nit.
25 signal. This m ight occur becaus e the batter y undervoltage limit has been reached, if t he tem perature has risen t oo h igh, or it might indicate that the inter nal batter y s ystem needs to be renewed.
26 6 Displays and T roubleshoot ing 6.1 Warning Sounds Warning sound Meaning Sounds every 10 seconds UPS is ope rating in battery mode. Sounds every second UPS is running in ba ttery mode an d will shortly shut down (battery system has rea ched the battery undervo ltage limit).
27 UPS overload Remove loads that are less important Battery voltage i s too low Char ge the battery for at least 8 hours Data backup ti me is only very short on power failure Battery fault die to hig.
28 7 Maintenance The PROT ECT A. consists of state-of-the-ar t, non-w earing components. W e do, however, recomm end regular visual checks of the u nit to m aintain its co ntinuous ava ilabilit y and operational reliab ility.
29 7.1 Battery Replacement ATTENTIO N: A batter y can cause an elec tric shock, and represents a consid erable hazard if ha ndled incorrectl y. The following precaution s s hould be taken before the batter y is renewed. ♦ Switch off the UPS and disc onnect the mains cabl e from the sock et.
30 8 Sto rage and Dis posal Storage Long s torage tim es without charging or discharging th e batter y at r egular interv als ma y lead to perm anent damage of the batter y. If the batter y is stored at room temperature ( 20° C to 30° C) it will autom atically disc harge at a rate of 3- 6% per m onth due to in ternal reactions.
31 9 List of T erms 9.1 Technical Terminology AVR Automatic Voltage Reg ulation Automatic voltage regulation again st mains voltage deviations DC/DC booster Circuit technology for increasing a DC volt.
32 Guarantee Certificate T y pe: …….……… ……….…............. ........................... .............. Unit number:…….…… ………….…....... ................................. ........... Date of purchase:…….… …………….
Een belangrijk punt na aankoop van elk apparaat AEG PROTECT A. 500 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen AEG PROTECT A. 500 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens AEG PROTECT A. 500 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding AEG PROTECT A. 500 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over AEG PROTECT A. 500 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van AEG PROTECT A. 500 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de AEG PROTECT A. 500 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met AEG PROTECT A. 500 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
