Gebruiksaanwijzing /service van het product Cocoon Home DSD500WTE2 van de fabrikant Denon
Ga naar pagina of 42
DSD-50 0 SPEAKER DOCK Owner ’ s Manual Pr eparations Operations Infor mations.
I n SAFETY PRECAUTIONS CA UTION RISK OF ELECTRIC SHOCK DO NO T OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
II n NO TES ON USE WARNINGS • Avoid high temperatures. Allow for sufficient heat dispersion when installed in a rack. • Handle the power cord carefully. Hold the plug when unplugging the cord. • Keep the unit free from moisture, water, and dust.
1 Thank you for purchasing this DENON product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading them, be sure to keep them for future reference.
2 Features Equipped with a Dock that supports iPhone ® , iPod touch ® and iPad ® ( v page6 ) This unit employs a slide type Dock that comes out when you push its front. By storing the Dock within this unit when you do not use it, this unit becomes compact.
3 Remote operation About the remote control unit n Inserting the batteries q Remove the rear lid in the direction of the arrow and remove it. w Load the two batteries properly as indicated by the marks in the battery compartment. R03/AAA e Put the rear cover back on.
Preparations 4 F Connections v page5 v page5 v page5 PORTABLE PLAYER v page5 v page6 F Connecting to a home network (LAN) v page7 v page9 v page10 Preparations Here, we explain the connections methods for this unit.
5 NOTE • Do not plug in the power cord until all connections have been completed. • When making connections, also refer to the owner’s manual of the other components. • Do not bundle power supply cords together with connection cables.
6 Connecting an iOS device • You can enjoy music stored on an iOS device. • For operating instructions see “Playing an iOS device” ( v page14 ) iPod Dock connector Dismantling NOTE • Depending on the type of iOS device and the software version, some functions may not operate.
7 Connecting to a home network (LAN) When this unit is connected to your home network (LAN), you can enjoy various audio sources via the network. • Streaming playback from iPhone, iPod touch or i.
8 Network connections and settings There are two types of network connections available – wired and wireless. Select either of them according to your router functions and operating environment. Using a router equipped with the wireless LAN function Connect this unit to your router wirelessly.
9 Network connections and settings n When your router is equipped with a WPS button By just pressing the WPS button on your router and this unit, the wireless LAN connection settings are made. • Before turning this unit on, make sure that an Ethernet cable is not connected to this unit.
10 Network connections and settings Wired LAN AC IN USB NETWORK WIRELESS LAN LOUDNESS ON / ST ANDBY AUX IN NETLINK WPS 5V 0.5A Internet To WAN side Router To LAN port To LAN port LAN port/ Ethernet co.
11 Using PC to make network settings of this unit n When this unit is connected to your PC through wireless LAN Before turning this unit on, make sure that an Ethernet cable is not connected to this unit. If a cable is connected, have this unit enter the power standby mode and disconnect the cable.
12 Operations F Playback v page13 v page14 v page15 v page17 v page18 PORTABLE PLAYER v page19 v page20 F How to make detailed settings v page22 Operations Here, we explain functions and operations that let you make better use of this unit.
13 Playback This section provides how to play back music with this unit. This unit can play back music from the following devices (media). • iPhone, iPod and iPad When connected to this unit ( v .
14 Playing an iOS device With this unit, you can listen to music on an iOS device. It is also possible to operate the iOS device from the main unit or remote control. For information on the iOS device models that can be played back with this unit, see “Connecting an iOS device” ( v page6 ).
15 AirPlay function Enjoy music from your iTunes library with high quality sound anywhere in your home. Use the Apple Remote app z for iPhone, iPod touch and iPad to control iTunes from any room in your home. z Available as a free download from the App Store.
16 n Perform iTunes playback operations with the remote control unit of this unit With this unit’s remote control unit, you can perform iTunes song play, pause, and auto search (cue) operations. 1 Select “Edit” – “Preferences...” on the menu.
17 Listening to internet radio Internet radio refers to radio broadcasts distributed over the Internet. Internet radio stations from around the world can be received. NOTE Before playing back the Internet radio, this unit must be connected to the network.
18 Playing a USB memory device A USB memory device can be connected to the USB port of this unit to play music files stored on the USB memory device. Important information • Only USB memory devices conforming to mass storage class and MTP (Media Transfer Protocol) standards can be played on this unit.
19 Removing the USB memory device 1 Press X to set the standby mode. 2 Check that the communication indicator on the USB memory device is not ashing, then pull out the USB memory device. NOTE Do not remove the USB memory device from the unit when the USB memory communication indicator is flashing.
20 Playing back files stored on PC or NAS with Cocoon App (Music Server) This unit can play back music files and playlists (m3u, wpl) stored on a PC, Digital Media Server (DMS) and on Network Attached Storage (NAS) that supports DLNA. NOTE • Before playing back music files on music servers, this unit must be connected to the network.
21 Playing back files stored on PC or NAS with Cocoon App (Music Server) About playback When you start playback on PC, NAS, or DMS, the input source for this unit automatically switches to “Music Server”, and audio is output from this unit. The name of the currently played back track and its artist name appear on the display of this unit.
22 Menu map Setting items Detailed items Description Page Language Language Sets the language for display the menu. 23 Clock Clock Auto Adjust(On) Automatically performs the clock setting from the time information on the Internet. 23 Time Zone(+12H) Sets your local time zone (for Auto Adjust).
23 Setting the language (Language) Sets the language for display the menu. • The factory default setting is “English”. 1 Press + and – at the same time. Turns on the menu settings mode and the menu appears on the display ( v page22 “Menu map”).
24 Setting the clock (Clock) Setting the Summer Time (Summer Time) Use the following procedure to set Summer time if the Summer time system is used in your country. 1 Press + and – at the same time. Turns on the menu settings mode and the menu appears on the display ( v page22 “Menu map”).
25 Setting the volume limit (Max Vol Level) Make a setting for maximum volume. • The factory default setting is “50”. 1 Press + and – at the same time. Turns on the menu settings mode and the menu appears on the display ( v page22 “Menu map”).
26 n Notes concerning use of “Firmware Update” • Do not turn off the power until updating or upgrading is completed. • Even with a broadband connection to the Internet, approximately 20 minutes is required for the updating procedure to be completed.
Informations 27 F Part names and functions v page28 F Other information v page30 F Troubleshooting v page33 F Specifications v page36 F Index v page37 Informations Here, we list various information related to this unit. Please refer to this information as needed.
28 Front panel For buttons not explained here, see the page indicated in parentheses ( ). q e w r t y q Display G Wireless LAN signal strength H : Strong : Medium : Weak : Not connected Part names and functions Rear panel See the page indicated in parentheses ( ).
29 Remote control unit For buttons not explained here, see the page indicated in parentheses ( ). q Skip buttons ( 8 , 9 ) ··························· ( 14 ) w Play/Pause bu.
30 Other information n Trademark information ( v page30 ) n Explanation of terms ( v page31 ) Trademark information This product uses the following technologies (Random order): “Made for iPod.
31 Explanation of terms A AES (Advanced Encryption Standard) This is a next generation standard encryption method replacing the current DES and 3DES, and because of its high security it is expected to be applied widely to wireless LANs in the future.
32 V vTuner This is a free online content server for Internet radio. Note that usage fees are included in upgrade costs. For inquiries about this service, visit the vTuner site below. vTuner website: http://www.radiodenon.com This product is protected by certain intellectual property rights of Nothing Else Matters Software and BridgeCo.
33 Troubleshooting If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other devices operating properly? If this unit does not operate properly, check the items listed in the table below.
34 Symptom Cause/Solution Page Internet radio cannot be played. • Ethernet cable is not properly connected or network is disconnected. Check the connection status. • Program is being broadcast in non-compatible format. Only Internet radio programs in MP3 and WMA can be played on this unit.
35 G Remote control unit H Symptom Cause/Solution Page The set cannot be operated with the remote control unit. • Batteries are worn out. Replace with new batteries. • Operate the remote control unit within a distance of about 7 m from this unit and at an angle of within 30°.
36 Specifications n Audio section • Amplifiers: 4 x 25 W ClassD • Drivers: 2 x 40 mm Tweeter 2 x 100 mm Woofer n Clock • Clock method Within 1 – 2 minutes per month n Wireless LAN Network type (wireless LAN standards): Conforming to IEEE 802.
37 v A Accessories ·························································· 1 Adjusting the master volume ·················.
38 Dimensions Unit : mm 236.0 451.0 27.0 170.0 Weight : 5.4 kg Pr eparations Operations Infor mations Infor mations.
D&M Holdings Inc. 3520 10118 00AD V00 www.denon.com.
Een belangrijk punt na aankoop van elk apparaat Denon Cocoon Home DSD500WTE2 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Denon Cocoon Home DSD500WTE2 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Denon Cocoon Home DSD500WTE2 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Denon Cocoon Home DSD500WTE2 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Denon Cocoon Home DSD500WTE2 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Denon Cocoon Home DSD500WTE2 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Denon Cocoon Home DSD500WTE2 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Denon Cocoon Home DSD500WTE2 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
