Gebruiksaanwijzing /service van het product PRO 60 van de fabrikant Denso
Ga naar pagina of 28
T echnical Services Department DSCA P/N: LA990009-1219 Third Issue: Mar ch 2003 GAC P/N: LA484007-1441 Printed in the U.S.A. DENSO SALES CALIFORNIA, INC.
LIMITED W ARRANTY DENSO SALES CALIFORNIA, INC. ("DENSO") warrants its MOVINCOOL Products only to the extent stated in its of ficial written warranties.
OPERA TION MANUAL OFFICE PRO 60.
ii.
TABLE OF CONTENTS FOREWORD ............................................................................................ 1 Definition of T erms .......................................................................... 1 GENERAL WARNINGS & CAUTIONS .
iv.
FOREWORD Congratulations on purchasing the MovinCool portable air conditioner . This manual explains how to assemble, install and operate the MovinCool Office Pr o 60 portable air conditioning unit. Please r ead this operation manual thoroughly to familiarize yourself with the featur es of the unit and to ensure years of r eliable operation.
GENERAL W ARNINGS & CAUTIONS • All electrical work, if necessary , should only be performed by qualified electrical personnel. Repair to electrical components by non-certified technicians may result in personal injury and/or dam- age to the unit.
INVENTOR Y After unpacking your MovinCool unit, please check to make sur e you have the following items: •O f fice Pr o 60 MovinCool Unit (1) • Operation Manual/W arranty Card (1) NOTE: If any of these items were not included in the box or appear damaged, please contact your MovinCool reseller for replacement.
INST ALLA TION Choosing an Installation Site CAUTION: Following are some pr ecautions to consider before choosing your installation site. Please review car efully as improper installation may r esult in personal injury or damage to the unit. • Do not use the unit in areas wher e leakage of flammable gas may occur .
INST ALLA TION (cont.) Moving the Unit Unlock the casters and push the MovinCool unit, using the side handles, to a flat, level surface and set the casters back to the LOCKED position.
INST ALLA TION (cont.) Plugging in the Unit • Check the pr ongs and surface of the power cord plug for dust/dirt. If dust and/or dirt are pr esent, wipe off with a clean, dry cloth. • Check the power cord, plug and pr ongs for damage or excess play .
FEA TURES OP60 Features • An electronic contr ol panel which allows the user to control the unit’ s operation easily . • Dual fan speeds (either High or Low) in both COOL and Fan Only modes. •A digital display that indicates the T emperatur e SET POINT (either Fahrenheit or Celsius) in which the COOL Mode will operate.
TANK FULL SET POINT F C ROOM TEMP AM PM SET TEMP CLOCK/TIMER FAN ON/OFF COOL ON/OFF PROGRAM Office Pro 60 SET ST ART TIME END TIME SET CLOCK RUN HRS MIN 6 5 4 3 2 1 OPERA TION Control Panel Befor e operating the unit, it is important to familiarize yourself with the basic controls located on the contr ol panel.
OPERA TION (cont.) Control Panel (Cont.) ➆ T emperature Scale Illuminates to indicate the curr ent LED temperatur es being displayed are either in °C or °F; also used to display the clock when programming. ➇ AM/PM LED Illuminates to indicate AM or PM time of day .
OPERA TION (cont.) Operating in COOL Mode ➀ The unit can be operated in COOL mode by pr essing the COOL ON/OFF button (LED illuminates). NOTE: In COOL mode the unit can only be turned off by pressing the “COOL ON/OFF” button again, not by pressing the fan buttons.
OPERA TION (cont.) How to Set a Program ➀ Setting a ST ART TIME Press the Pr ogram SET button. The Program SET button and ST AR T TIME LEDs will illuminate. Pr ess the HRS and MIN buttons to set the ST ART TIME. ➁ Setting an END TIME Press the Pr ogram SET button until the END TIME LED illuminates.
OPERA TION (cont.) How to Set a Program (Cont.) NOTE: • The unit will return to the previous mode if a program is turned off while it is running. • The Program RUN LED flashes while a program is running. It is illuminated continuously when the program mode is activated.
OPERA TION (cont.) Operating Modes Office Pr o 60 operates in 2 modes, F AN Only and COOL. When in F AN Only mode, the unit circulates the surr ounding air .
OPERA TION (cont.) Emptying the Drain T ank (If equipped) During COOL mode, condensate will accumulate in the drain tank. When the drain tank becomes full, the FULL T ANK LED will flash and the unit will shut off automatically .
A B OPERA TION (cont.) Drain Pump A drain pump is included to allow continuous operation and to eliminate the need for a drain tank. • When the water collects to level (A) in the pump reservoir , the drain pump begins to operate and dischar ges the water .
HOSE INST ALLA TION Note: The OP60 is equipped with a 20 foot (6 m) hose. Connect the 20 foot (6 m) hose to the drain outlet spout and feed it through the gr ommet on the right hand side of the unit. Note: Do not use more than 18 feet (5.5 m) of drain hose vertically .
DAIL Y INSPECTION & MAINTENANCE Emptying the Drain T ank To empty the drain tank, r efer to instructions, page 14. Cleaning the Air Filters Clean the air filters once a week. If the unit is used in a dusty envir on- ment, more fr equent cleaning may be requir ed.
DAIL Y INSPECTION & MAINTENANCE (cont.) Cleaning Method ➀ Remove dust from the element with a vacuum cleaner , or rinse in cold or lukewarm water . If the element is extremely dirty , wash with a neutral deter gent. ➁ After the element has been cleaned, rinse with clean running water , allow to dry , then r einstall.
TROUBLESHOOTING Office Pr o 60 Self-Diagnostic Codes Self-Diagnostic Codes will be displayed on the Contr ol Board under the following conditions: TANK FULL SET POINT F C ROOM TEMP AM PM SET TEMP CLOC.
TECHNICAL SPECIFICA TIONS ITEM/FEA TURES OFFICE PRO 60 Rating Conditions dry bulb 95º F (35º C) wet bulb 83º F (28.2º C) humidity 60% Specifications power frequency 60Hz line voltage single phase 208/230V power consumption 7.
LIMITED W ARRANTY DENSO SALES CALIFORNIA, INC. ("DENSO") warrants its MOVINCOOL Products only to the extent stated in its of ficial written warranties.
T echnical Services Department DSCA P/N: LA990009-1219 Third Issue: Mar ch 2003 GAC P/N: LA484007-1441 Printed in the U.S.A. DENSO SALES CALIFORNIA, INC.
Een belangrijk punt na aankoop van elk apparaat Denso PRO 60 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Denso PRO 60 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Denso PRO 60 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Denso PRO 60 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Denso PRO 60 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Denso PRO 60 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Denso PRO 60 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Denso PRO 60 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
