Gebruiksaanwijzing /service van het product AV200 van de fabrikant DeWalt
Ga naar pagina of 50
AP Manual #2%!4%!,)'(4.).'&!34(/-%.%47/2+).-).54%3.
Corinex A V200 P owerline Ethernet W all Mount EN 61000-3-2 EN 61000-3-3 V ancouver / April 14. 2008 Corinex Communications Corp. # 601 - 905 W est P ender Street V ancouver , BC V6C 1L6, Canada.
1 Copyright Corinex AV200 P owerline Ethernet W all Mount This document, as well as the software described in it, is furnished under license and may be used or copied only in accordance with the terms of the license.
Corinex AV200 P owerline Ethernet W all Mount 2 End User License Agreement CORINEX COMMUNICA TIONS CORPORA TION This End User License Agreement (“EULA ”) is a legal agreement between you and CORINEX COMMUNICA TIONS CORPORA TION (“CORINEX”) with regard to the copyrighted Software provided with this EULA.
Corinex AV200 P owerline Ethernet W all Mount 3 End User License Agreement 7. Export Laws. This EULA involves products and/or technical data that may be controlled under any applicable export control laws, and regulation, and may be subject to any approval required under such laws and regulations.
Contents Copyright .......................................................................................... 1 End User License Agreement .............................................................. 2 1. Introduction ...............................
5 Introduction Corinex AV200 P owerline Ethernet W all Mount 1 Introduction 1.1 Overview The Corinex A V200 Powerline Ethernet W all Mount Adapter is a network adapter , connecting your computers and devices to each other , and to your Internet connection, over the electrical circuits already in your home or office.
6 Installation Corinex AV200 P owerline Ethernet W all Mount 2 Installation 2.1 P ackage Contents When you receive your Corinex A V200 P owerline Ethernet W all Mount , check to be sure that your pack.
LED Definitions (Buttons from top to bottom) 1. PWR (Upper LED) Shows the status of the adapter: the LED is on, if the adapter is connected to power . 2. VPI (Middle LED) Displays the quality of the powerline link, when the adapter is synchronized with another adapter on the same network.
2.4.2 SYNC/ RST Buttton 2.4.2.1 OBUS By default, Corinex A V200 Ethernet W all Mount powerline adapters come without a network identifier and encryption key . As a result, when they are plugged into the mains a new PLC network will be created (called public network).
Installation Corinex AV200 P owerline Ethernet W all Mount 9 1. Identify which is the AP adapter in an existing PLC network. The AP adapter always shows its AP indicator ON in green.
Installation Corinex AV200 P owerline Ethernet W all Mount 10 2.4.3 LED Definitions 2.4.3.1 VPI LED VPI Colour Adapter Status Meaning Low Red OFF (Standby) Adapter is in Standby mode Red ON If Powerli.
11 Installation Corinex AV200 P owerline Ethernet W all Mount 2.6 Connecting the W all Mount Adapter T o connect the Corinex AV200 P owerline Ethernet W all Mount to your computer , follow the steps listed below .
12 Adapter Configuration Corinex AV200 P owerline Ethernet W all Mount 3 Adapter Configuration In order to access the web-based configuration pages, it is necessary to know the adapter ’s IP address and for your computer to be connected to the wall mount adapter (as described in section 2.
13 Adapter Configuration Corinex AV200 P owerline Ethernet W all Mount Note: If password protection is disabled, you will be taken straight to the Main page, rather than the Authentication page.
Adapter Configuration Corinex AV200 P owerline Ethernet W all Mount 3.3 Additional Information P age This page shows more detailed information about the adapter . System Information Uptime Shows how long the adapter has been running since the last startup.
Adapter Configuration Corinex AV200 P owerline Ethernet W all Mount 15 PHY Status Notches Indicates whether or not frequency notches are enabled. notches should always be enabled, in order to eliminate interference with Radio Amateur bands specified by the local authorities.
Adapter Configuration Corinex AV200 P owerline Ethernet W all Mount 16 Priority Status Default Priority Shows the default priority for traffic transmission. Criterion 1 & 2 Shows which criteria are used to classify traffic. This can be TOS, 802.1p or Custom .
17 Adapter Configuration Corinex AV200 P owerline Ethernet W all Mount 3.4 Change Configuration P age 3.4.1 Overview The configuration pages allow you to change the settings on the wall mount adapter .
18 Adapter Configuration Corinex AV200 P owerline Ethernet W all Mount 3.4.2 Basic Settings Most of the time, the only thing that needs to be changed is the Network Identifier and the Encryption, in order to avoid interfering with other networks and protect your information.
Adapter Configuration Corinex AV200 P owerline Ethernet W all Mount 19 If you want to enable 3DES encryption in your network, please select one of the input methods and enter the password. Input methods: ASCII If ASCII is selected, the Encryption Key string can have up to 24 non-extended ASCII characters.
Adapter Configuration Corinex AV200 P owerline Ethernet W all Mount 20 If you want to configure the wall mount adapter to function as an automatic EP/AP , please select “EP” from the list. If you want the adapter to behave as a Master , select “Fixed AP” from the list.
Adapter Configuration Corinex AV200 P owerline Ethernet W all Mount 21 The following picture shows an example of two A V200 networks with different Network Identifiers: Communication between adapters (called modems in this picture) is encrypted with a T riple-DES algorithm.
22 Adapter Configuration Corinex AV200 P owerline Ethernet W all Mount 3.4.3.2 Network Configuration Y our Corinex AV200 P owerline W all Mount can be configured to use either DHCP (automatic IP address assignment), or a fixed IP . The following parameters are used by the fixed IP configuration.
23 Adapter Configuration Corinex AV200 P owerline Ethernet W all Mount Note: It is strongly advised to turn on the notching function. P ower Control is an automatic transmission power control which prevents different networks from overpowering each other .
24 Adapter Configuration Corinex AV200 P owerline Ethernet W all Mount 3.4.6 VLAN Configuration When A V200 Powerline W all Mount adapters are used for ADSL extension, it is important for the operator to be able to distinguish the type of traffic that each adapter is generating.
25 Adapter Configuration Corinex AV200 P owerline Ethernet W all Mount After setting both values, please click OK to save the values to NVRAM. The changes will be applied immediately and the LED behavior may change. Several options are available in this form.
26 Adapter Configuration Corinex AV200 P owerline Ethernet W all Mount There is one offset, and one bitmask and pattern for the trigger condition. The trig- ger condition is used to make sure that the Ethernet frame contains, for example, an IP frame.
27 Adapter Configuration Corinex AV200 P owerline Ethernet W all Mount 3.4.9 T ools Clicking on hardware reset button will restart your adapter . The configuration will remain the same, and any changes made in the Network Configuration section will be applied.
28 Adapter Configuration Corinex AV200 P owerline Ethernet W all Mount 3.4.11 Firmware upgrade using a TFTP Server T o upgrade the firmware of the adapter using TFTP , a TFTP server must be running on a computer . W e recommend a freeware tool called TFTPD32 .
29 Adapter Configuration Corinex AV200 P owerline Ethernet W all Mount 6. Click “OK” to start the process. The progress is shown every 30 seconds. 7. The adapter will first download the file and then calculate the CRC. 8. If the CRC is correct, the Hardware Rese t button will be highlighted.
30 Adapter Configuration Corinex AV200 P owerline Ethernet W all Mount First of all, the Criterion field must be set to Custom , in order to create custom rules for traffic classification. T o prioritize UDP traffic, first the Ethernet packets containing IP packets must be detected.
31 Video Network Setups Corinex AV200 P owerline Ethernet W all Mount 4 V ideo Network Setups 4.1 Introduction An In-Home A V network is made up of an access point (AP) adapter and several end points (EPs).
32 Video Network Setups Corinex AV200 P owerline Ethernet W all Mount Corinex A V200 P owerline W all Mount Corinex A V200 P owerline W all Mount Home Electrical Wiring HDTV Set- T op Box Computer/ Me.
33 Video Network Setups Corinex AV200 P owerline Ethernet W all Mount Corinex A V200 Powerline W all Mount Corinex A V200 Powerline W all Mount Corinex A V200 Powerline W all Mount Home Electrical Wir.
34 Video Network Setups Corinex AV200 P owerline Ethernet W all Mount AV200 Powerline Wal l Mount AP VPI Power SYNC/RST STANDBY AV200 Powerline Wal l Mount AP VPI Power SYNC/RST STANDB Y AV200 Powerli.
35 Network Configuration Corinex AV200 P owerline Ethernet W all Mount 3. The Local Area Connection Status screen will appear . Click the Properties button.
36 Network Configuration Corinex AV200 P owerline Ethernet W all Mount 5. Select Use the following IP address . Set the IP address manually in the format 10.10.1.X (for example 10.10.1.200) and mask 255.255.0.0 of local T CP/IPv4 settings. The Default gateway box can be empty .
37 Network Configuration Corinex AV200 P owerline Ethernet W all Mount 2. Select the Local Area Connection icon for the applicable adapter (Ethernet adapter or P owerline - usually the first adapter listed). Double-click the Local Area Connection . 3.
38 Network Configuration Corinex AV200 P owerline Ethernet W all Mount 4. Select Internet Protocol (TCP/IP) and click the P roperties button. 5. Select Use the following IP address . Set the IP address manually in the format 10.10.1.X (for example 10.
39 Network Configuration Corinex AV200 P owerline Ethernet W all Mount 6. Click OK in the T CP/IP Properties window to complete the PC configuration, and click Close or the OK button to close the Network window . 5.1.3 Setting up a static IP in Windows 2000 1.
40 Network Configuration Corinex AV200 P owerline Ethernet W all Mount 3. Click the Properties button to get to the Local Area Connection Properties. 4. Select Internet Protocol (TCP/IP) and click the P roperties button. 5. Select Use the following IP address .
41 Network Configuration Corinex AV200 P owerline Ethernet W all Mount 6. Click the OK button in the T CP/IP P roperties window to complete the PC configuration, and click Close or OK to close the Network window . 5.1.4 Setting Up a Static IP in Windows 98 1.
42 Network Configuration Corinex AV200 P owerline Ethernet W all Mount 5.1.6 Setting up a static IP in Mac OS 1. Open the Network Control P anel in System P references .
43 Network Configuration Corinex AV200 P owerline Ethernet W all Mount 2. Select Built-in Ethernet from the pop-up menu. 3. Set the IP address manually in the format 10.
44 Network Configuration Corinex AV200 P owerline Ethernet W all Mount 4. Click on Apply Now and close the Network panel, saving your settings. tcpwin.reg for use with Windows operating systems 5.2 Improving Network Performance The latency (delay) of a P owerline network is higher than that of an Ethernet network.
45 Network Configuration Corinex AV200 P owerline Ethernet W all Mount With a Linux PC running kernel 2.4 or higher , open the console and execute the command ./tcpwin.sh 512 logged in as root . 5.4 Using Powerline Filters A PLC (P owerline) filter is a low-pass filter that will only allow the 50/60 Hz main voltage through.
46 Network Configuration Corinex AV200 P owerline Ethernet W all Mount When to use this filter: • When you want to isolate a P owerline test network from the rest of the electrical grid, either beca.
47 T roubleshooting Guide Corinex AV200 P owerline Ethernet W all Mount 6 Troubleshooting Guide The Corinex A V200 Powerline Ethernet W all Mount has been designed to be a reliable and easy-to-use network connection device. Please refer to the list below to aid in troubleshooting or visit www .
48 T roubleshooting Guide Corinex AV200 P owerline Ethernet W all Mount which the wall mount adapter is connected, e.g. ping 192.168.4.1 -t (this process can be interrupted by pressing CTRL+C ). 1. Ping the IP address of the computer to which the wall mount adapter is connected.
Een belangrijk punt na aankoop van elk apparaat DeWalt AV200 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen DeWalt AV200 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens DeWalt AV200 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding DeWalt AV200 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over DeWalt AV200 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van DeWalt AV200 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de DeWalt AV200 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met DeWalt AV200 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
