Gebruiksaanwijzing /service van het product 54420 van de fabrikant Eclipse - Fujitsu Ten
Ga naar pagina of 76
OWNER'S MANUAL We appreciate your purchase of this receiver. Please read through this manual for correct operation. We suggest that after reading it you keep this manual in a safe place for future reference.
2 For your safety in using the 54420 Warnings and caution signs, illustrated below, are posted throughout this manual as well as on the 54420. They show safe and correct ways to handle the product so as to prevent personal injury to you and others and avoid damage to property.
3 • Do not place the vinyl storage bag over a person. It may cause a serious accident or death by suffocation. • Do not adjust the controls while driving the car. To adjust the controls, stop the car in a safe location. • To prevent accidents, store batteries for the remote control out of the reach of small children.
4 • Do not stick your fingers or hands into the disc slot. Doing so may cause personal injury. • This product must be operated only as on-board equipment, or it may cause electrical shock or injury. • Do not play distorted sounds for long periods of time; the speakers may overheat and cause a fire.
5 T able of Contents Operating Precautions ................................................ 8 Notes on Operation ........................................................................ 8 About compact discs ...........................................
6 How to operate the tuner .......................................... 31 Tuning to a station ....................................................................... 31 Entering stations into memory automatically (The automatic preset mode: ASM) ......
7 If you have a question: .............................................. 60 Displaying information (for troubleshooting) .................................. 61 Specifications ............................................................ 64 Before installation .
Operating precautions 8 Notes on Operation ٟ Operating Precautions <Your 54420 will perform well over a long period of time through correct handling and care.> • For your safety, play only at volume levels that allow outside sounds to be heard.
9 Operating precautions • The signal recorded on a compact disc is read by a laser beam, so nothing touches the disc surface. A scratch on the recorded surface or a badly warped disc may cause deteriorated sound quality or intermittent playback.
Operating precautions 10 About CD accessories • Do not use accessories (stabilizers, protective seals, laser lens cleaners, etc.) sold for “ improving sound performance ” or “ protecting CDs. ” The changes in CD thickness or outside dimensions made by these accessories may cause problems in the player.
11 Operating precautions About irregularly-shaped CDs • Specially-shaped CDs, like heart- shaped or octagonal CDs, cannot be played. Do not attempt to play them, even with an adapter, since they may damage the player. • Use a commercially available compact disc cleaner to clean a CD, wiping lightly from the center to the edge.
ٟ Names of controls and parts Front View ※ NOTE ： Double function button → "E-COM"&"MUTE" functions Names of controls and parts 12 12 12 [CD] button Buttons [1] to [6] [.
13 ESN (Key CD) security operating procedure ٟ ESN (Key CD) security operating procedure ع How to program the Key CD 1 . Turn the vehicle’s ignition on. Press the [PWR] button or [FM• AM] button to activate the tuner mode. The tuner is now turned on.
ESN (Key CD) security operating procedure 14 • If there is a problem with the inserted CD, an [ERR] message will appear for two seconds and the CD will be ejected. Reinsert the ejected CD. • If a CD causes the [ERR] message to appear twice in a row, a [CHANGE] message will appear for two seconds.
15 ESN (Key CD) security operating procedure • This process cancels the protection for the ESN deck. • If power to the 54420 is disconnected, then reconnected, a key CD will not need to be inserted in order to return the unit to normal operation. • Inserting a CD other than the Key CD will not cancel the protection.
ESN (Key CD) security operating procedure 16 ع How to r esume normal operation (ESN security lock out) If power to the 54420 is disconnected while ESN security is active (a Key CD was programmed), operation is disabled until power is restored and the unit unlocked.
17 ESN (Key CD) security operating procedure ع What happens if an incorrect CD is inserted? 1 . An [ERR_] message will be appear, then change to a flashing [DISC], then the CD will be ejected. You will have five uninterrupted attempts to insert the correct CD.
ESN (key CD) security operating procedure 18 ع How to turn the Security indicator on/off Once ESN security is activated, the indicator flashes whenever the vehicle ’ s ignition is turned off, warning potential thieves that the unit is protected. However, if you do not want this visible deterrent, it may be turned off.
19 Basic operation [FM ･ AM] button [ ] buttons [PWR] button ٟ Basic operation This section covers basic operating procedures.For additional details, please refer to the sections on specific functions. ع T urning the power on and off 1 . Press the [PWR] button.
Basic operation 20 ع Listening to the tuner 1 . Press the [FM• AM] button. This will turn the tuner on. To turn the tuner off, either press the [PWR] button or select another mode. 2 . Tap the [FM • AM] button to switch to the desired FM or AM bands.
21 Basic operation [DISP] button Button [6] [FUNC] button ع Adjusting audio volume 1 . Turn the [AUDIO CONTROL] button to the left or right. Turn to the left : Decreases the volume. Turn to the right : Increases the volume. • Press and hold the [E-COM] button for more than two seconds to activate or cancel MUTE function.
Basic operation 22 ع Others ٕ ٕ Disabling the guide tone feature (for button operation) The receiver is set at the factory to emit a beep tone in response to button operation. The guide tone feature may be disabled in the following procedure: 1 . Press and release the [FUNC] button.
23 Basic operation [AUDIO CONTROL] button ٕ ٕ Setting the clock This receiver uses the 12-hour, A.M./P.M.display notation. 1 . Press the [DISP] button repeatedly to switch to the clock display mode. 2 . To adjust the hour, press either button [1] or [2] while holding the [DISP] button down.
Basic operation 24 ٕ ٕ Switching audio control modes Various audio control modes may be fine-tuned using this procedure. 1 . Press the [AUDIO CONTROL] button for less than one second.
25 Basic operation ٕ Switching Non-Fader modes 1 . Press the [FUNC] button. 2 . Press button [5] to switch the phase. 3 . Press the [FUNC] button. Pressing the button will cancel Function mode. ٕ ٕ Disabling the T one Control Cancel feature 1 . Press the [FUNC] button.
How to operate the CD player 26 ٟ How to operate the CD player First press the [CD] button to switch to the disc mode. It is assumed here that a CD has already been loaded into the unit. ع Listening to CDs 1 . Press the [CD] button. This turns on the disc mode and starts CD play.
27 How to operate the CD player ع Advancing to the next track or returning to the beginning of the track being played 1 . Press the [ ] button. [ ] button: Advances to the next track.
How to operate the CD player 28 ع Repeating the same track (REPEA T) 1 . Press button [5 (RPT)] to repeat the track being played. To cancel, press button [5] again. ع Playing tracks in random or der (RANDOM) 1 . Press button [6 (RAND)] to play the tracks in random order.
29 How to operate the CD player ع Ejecting the disc 1 . Press the [ （ EJECT ） ] button. [ （ EJECT ） ] button.
How to operate the CD player 30 ع Displaying a genre for a CDs A preset genre can be assigned to individual CD and displayed when they are played. 1 . Press the [DISP] button until a preset genre is displayed. 2 . Press button [1] Nine genre are available for a CD in the following sequence; 1.
31 How to operate the tuner ٟ How to operate the tuner First, press the [FM • AM] button to start tuner operation. There are automatic and manual methods for setting stations in memory. The receiver will accept up to 24 stations in memory: six in AM and 18 in FM (6 each for FM1, FM2 and FM3.
How to operate the tuner 32 • At times, it may be difficult to maintain optimum reception because the antenna affixed to your vehicle is in motion constantly (relative to the broadcast antenna), encountering continuous variation in the received radio signals ’ strength.
33 How to operate the tuner • Press any numbered button to select the station whose frequency is indicated right above the button. • When a new station is set in memory, the station previously set in memory will be deleted.
How to operate the tuner 34 ع Preset station scan This function enables reception of all the stations in the numbered preset buttons for five seconds each. 1 . Press the [ASM] button. [P • SCAN] will appear at the top of the display, and stations stored under preset buttons [1] through [6] will beplayed for five seconds each.
35 How to operate the tuner ع FM reception characteristics In general, FM has much better tonal quality than AM. However, FM and FM stereo reception encounter several characteristic problems not encountered with AM. FM is more difficult to receive than AM in a moving vehicle.
How to operate the tuner 36 3 . RECEPTION AREA OF FM BROADCASTS A home receiver can catch weak FM stereo signals through the use of a tall, directional or ultra-sensitive antenna.
37 How to operate the tuner 4 . MULTIPATH The reflection characteristics of FM waves cause another problem called multipath – FM wave signals reflecting off of buildings, mountains, etc.
How to use the Card remote control 38 ٟ How to use the Card remote control • Be careful when handling the control, especially because it is small and light. Dropping or striking it hard may damage it, wear out the battery or cause a malfunction. • Keep the remote control free of moisture, dust and water.
39 How to use the Card remote control ع T urning the power on/off 1 . Press the [PWR] button. The power turns on or off each time the button is pressed. • When the main unit is shut down, the remote control will not work. ع Adjusting the audio volume 1 .
How to use the Card remote control 40 ع How to play the tuner Enter the tuner mode first. ٕ ٕ Select the FM/AM band 1. Tap the [BAND] button. Each tap will switch tuner modes from FM1 → FM2 → FM3 → AM. ٕ ٕ Select a station (manually or automatically) A short tap of the button will allow manual station tuning.
41 How to use the Card remote control ع How to play CDs Select the disc mode first. ٕ ٕ Advancing to the next track or returning to the beginning of the track being played 1. Press the [ TRACK • APS ] button. [ ] button: Skips to the next track. [ ] button: Returns to the beginning of the track being played.
How to use the Card remote control 42 ع Replacing the battery Use one CR2025 battery. 1 . On the back of the remote control, while pressing the locking knob on the battery slot cover toward your right, pull out the battery carier with your fingernail.
43 How to use an optional NOB remote control ٟ How to use an optional NOB remote control ع T urning the power on/off 1 . Press the [PWR] button. The power turns on or off each time the button is pressed. • When the main unit is shut down, the remote control will not work.
How to use an optional NOB remote control 44 ع Switching playback modes 1 . Press the [MODE] button. Tap the button to switch modes in the following sequence: ع How to play the tuner Enter the tuner mode first. ٕ ٕ Select the FM/AM band 1. Tap the [BAND] button.
45 How to use an optional NOB remote control ٕ ٕ Selecting preset stations A total of six stations may be selected (preset tuning) out of those already set in memory through the main unit. (Refer to “ Manually setting stations into memory, ” page 33.
How to use an optional NOB remote control 46 (previous) disc. ٕ ٕ Switching disc modes 1. Press the [BAND] button. When the CD changer is connected, tap the [BAND] button to change modes from CD player → CD changer 1 → CD changer 2. The indicator will skip a changer or player that has no disc loaded in it.
47 How to use an optional NOB remote control ع Replacing the battery Use two AA cell batteries. 1 . Remove the back cover of the remote control unit by gently pressing and sliding it in the direction indicated by the arrow. 2 . Install the two batterles provided into the compartment as illustrated inside the compartment.
How to use an optional NOB remote control 48 ● Caution ● ・ Be extremely careful not to swallow the battery. ・ The battery life is approximately one year. If the remote control unit does not operate correctly or if the button lump gets dim, replace the batteries.
49 How to operate the receiver with an optional CD changer connected ٟ How to operate the receiver with an optional CD changer connected ع Basic operation This section covers the operation of the CD changer that is connected to the receiver. To switch from another mode, press the [CD] button.
How to operate the receiver with an optional CD changer connected 50 ٕ Playing the beginning of tracks (SCAN): 1. Press button [4 (SCAN)]. Tapping the button causes the changer to move up to the next track and play it for 10 seconds, then move up to the next track and play it for 10 seconds, and so on, on one CD, until the button is tapped again.
51 How to operate the receiver with an optional CD changer connected • Occasionally the same track happens to be played (selected) two or more times in a row, but it is no sign of a problem.
How to operate the receiver with an optional CD changer connected 52 ع Displaying a genre for a CDs A preset genre can be assigned to individual CD and displayed when they are played. 1 . Press the [DISP] button until a preset genre is displayed. 2 .
53 How to operate the receiver with an optional DSP/EQ unit connected ٟ How to operate the receiver with an optional DSP/EQ unit connected ع How to operate the DSP functions The DSP feature adds reverberations to simulate ambience in different types of surroundings (room sizes).
How to operate the receiver with an optional DSP/EQ unit connected 54 • The following six patterns are preset at the factory: ٕ ٕ Fine-tuning an individual roomsize mode Detailed adjustments are available in any of the room size modes. 1. After pressing the [FUNC] button, hold button [1] down for more than a second.
55 How to operate the receiver with an optional DSP/EQ unit connected 2. Tap button [AUDIO CONTROL] to select the desired mode of adjustment. The mode sequence on the button is as follows: 3. Turn the [AUDIO CONTROL] button. This button adjusts the reverberation level and duration.
How to operate the receiver with an optional DSP/EQ unit connected 56 5. Push the [FUNC] button. The adjustment mode will be canceled and the selected room size will now take effect. ٕ ٕ Retrieving a preset pattern fr om memory Press a preset button to retrieve the room size in memory.
57 How to operate the receiver with an optional DSP/EQ unit connected ع How to operate the EQ functions The EQ functions enable level adjustments of various frequency groups for optimum listening conditions with a specific kind of music or musical instrument.
How to operate the receiver with an optional DSP/EQ unit connected 58 ٕ Fine-tuning EQ functions 1. After pressing the [FUNC] button, hold button [2] down for more than one second. The EQ adjustment mode starts. 2. Tap button [2] until the desired equalizer mode is displayed.
59 How to operate the receiver with an optional DSP/EQ unit connected ٕ Retrieving an equalizer mode from memory Press a preset button to retrieve the equalizer mode set in memory for the button. The buttons that set equalizer modes in memory are called preset buttons.
If you have a question: 60 ٟ If you have a question: First check the items mentioned below before attempting to troubleshoot problems. ٨ Caution ٨ • If a problem occurs, for instance when the unit does not respond to any button presses, or the display doesn't work press the reset button using a sharp tool.
61 If you have a question: ع Displaying information (for troubleshooting) The information listed in the chart below is displayed to show the status of the CD player and CD changer. Refer to the chart for the appropriate action. Infomation Code Table When “ INFO ” flash on the indicator .
If you have a question: 62 Dead or weak sound Power does not turn on. Frequencies or titles set in memory are deleted. No guide tone sounds. The remote control does not work.
63 If you have a question: Problem Causes Remedial action to take Receives no stations, or receives static noise. Extend the antenna. Tune to a station. Tune to a local station. (Please note, there may be no local stations servicing the area where you are currently driving.
Specifications 64 ٟ Specifications < GENERAL > Power Supply 14.4VDC (11-16V) Current Drain 3A (1W) Dimensions (W x H x D) In-Dash Unit 7 ″× 2 ″× 6-1/8 ″ (178 × 50 × 155mm) < FM TUNER > Frequency Range 87.
65 Specifications < CD SECTION > Frequency Response 20~20,000Hz Wow & Flutter Below measurable limits Stereo Separation 64dB S/N Ratio (A-weighted) 94dB Dynamic Range 90dB Total Harmonic Distortion 0.03% (1KHz) < AUDIO AMPLIFIER > Power Output 20W × 4 (20~20,000Hz,1.
Before Installation 66 ٟ Before Installation Notes Be sure to disconnect the battery negative terminal before installing the receiver. ع Components No.
67 Mounting instruction ٟ Mounting instruction ع Mounting the main unit 1 . Insert the mounting sleeve into the opening in the vehicle console. 2 . Use a screwdriver or the like to bend the tabs in the mounting sleeve to secure the mounting sleeve .
Mounting instruction 68 4 . Mount the stud bolt to the main unit. 5 . Insert the main unit into the mounting sleeve until it locks in place. 6 . F asten the rear of the main unit using either method [A] or [B]. Select method [A] or [B] to suit the interior configuration of the vehicle.
69 Mounting instruction Notes To prevent unconnected leads from shorting out, insulate them by wrapping their tips with electrical tape. Similarly, insulate the ends of connected leads. If an external amplifier is to be connected to the receiver, be sure to ground its outside housing to the vehicle body (a metal part).
Mounting instruction 70.
71 Mounting instruction ع System.
Mounting instruction 72 Red FL FR RL RR Y ellow Blue Orange/White Blue/White Black 14.
73 Mounting instruction 14.
Mounting instruction 74.
75 Mounting instruction IMPOR T ANT RECORD YOUR “ KEY CD” HERE… STORE YOUR “ KEY CD” ALONG WITH YOUR OWNER’S MANUAL IN YOUR SOCK DRA WER..
by FUJITSU TEN R DIVISION OF FUJITSU TEN CORP. OF AMERICA 19600 SOUTH VERMONT AVENUE, TORRANCE, CA 90502 (310) 327-2151 090001-13810700 9912DE(N.O.) CUSTOMER NOTICE Please retain this booklet and write in the serial number of your 54420 for identification.
Een belangrijk punt na aankoop van elk apparaat Eclipse - Fujitsu Ten 54420 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Eclipse - Fujitsu Ten 54420 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Eclipse - Fujitsu Ten 54420 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Eclipse - Fujitsu Ten 54420 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Eclipse - Fujitsu Ten 54420 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Eclipse - Fujitsu Ten 54420 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Eclipse - Fujitsu Ten 54420 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Eclipse - Fujitsu Ten 54420 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
