Gebruiksaanwijzing /service van het product DAS400 van de fabrikant Edge10
Ga naar pagina of 31
4 Bay SATA II to USB Storage Appliance DAS400 User’s Manual.
Table of Contents 1 WELCOM E ............... ............ .............. ............. ................. ............. ............ ................. .............. ............ ............. 3 1.1 INTRODUCTION ............... ............. ..........
1 WELCOME 1.1 INTRODUCTION Thank you for choosing DAS400 storage appli ance. It is an easy-to-use storage that allows a dedicate d approach to storing a data. 1.2 PRECAUTION Please read the safe pr ecautions carefully before you us ing DAS400 storage appliance.
a Please be noted the follo wing product may run irregularly which are not un der warranty. Toshiba DynaBook, Satellite series (All K6 CP U models). IBM Aptiva E series (All K6 CPU models). Sotec E-note M260 series. All AMD K6 system. PC with sis7000/ 7001/ 7002 PC I to USB host controller.
1.5.2 MACINTOSH SYSTEMS • Power Mac G5, MacBook Pro or Mac Pro • Mac OS X 10.3.x or higher operation • CD-ROM drive • Mouse or compatible pointing device • USB conne ction: US B 1.0 or 2.0 direc t host co nnection or US B hub 1.6 PRODUCT CONTENTS The following parts are content.
2 INST ALLA TION 2.1 BEFORE INST ALLING Please unplug the power cable, and s witch the VAC to the correct position (For example , 115 for Japan, and 230 for UK) before installin g. It may exposure to st rong magnetic fields and ma lfunctions or damage.
• Open the front door and install the HDDs in order from the to p to the bottom. Please r efer to the diagram. • Twist the tool-less screws shut to seat the drive securely. • Close the front door and the upper chassis cover, than fasten the tool-less screws on the back panel.
2.3 UNST ALLING HARD DISK DRIVE Please unfasten the tool-less screw, and re lease the HDD from the 22-pin SAT A connector by use the tool-less screw, tha n remove the HD D one by one securely. 2.4 POWER ON / OFF • Push power switch instantly to switch on the power.
3 MODE SETTING 3.1 INTRODUCTION The DAS400 storage app liance is an easy-to-use storage that provides variety of modes; you can simplely set up the mod e by hardw are DI P switch on the back panel. The mode s hows as seen below. 3.2 DISK DRIVE MODE Please read the notics ca refully before you change disk dr ive mode.
3.3 POWER MODE Switch up the DIP 2 on the back pane l to set up the Normal Power Mode or Auto Power Mode; In Norma l Power Mode operating, DAS400 nee ds to turn on and off manually. Than press once on the power button , power will turn on; press p ower button for more than 3 se conds, power will turn off.
3.4 UNPLUG PROCEDURE • Single click on the right button of mouse on the “ Safel y Remo ve Ha rdw a re ” icon as below pictur e. DAS400 User’s Manual Ver.
• Single click on the left button of mouse on the “ Safely Remove Hardw are ” as below picture. • Select “ USB Mass Storage Device ”, than click on the left button of mouse on “ Stop ” as below pictu re.
• Select “ Century EX35S W4_SB4-A USB Device ”, than click on th e left button of mouse on “ OK ” as below picture. • Single click on the left butt on of mouse o n “ Close ”, to fin ish the procedure as below picture. WARNING ! To assure no dat a w ill be lost, alw ays follow the unplug procedure.
4 ALLOCA TING P ARTITION 4.1 ALLOCA TING PA R T I T I O N ON WINDOWS 2000 Before creatin g any partitions, disk drive mod e must first be create d using the DIP switch on th e back panel. Once the sets have been created , allow the system to load Windows.
• Select Disk Management un der Storage to view the disk drives . • Right-click on each Unallocated pa rtition and select Create Partitio n from the pop -up menu (One by one). • Click Next to cr eate a partition on a basic disk. • Select the part ition type you wa nt to create, than c lick Next .
• Specify the partition size you want to create, than c lick Next . • Assign the drive letter or path yo u want to create, than clic k Next . • Click Format this partition w ith the follow ing settings and Perform a Quick Format , se tup the File system to use , Allocation unit size , Volume label , than click Next .
• When the Create Partition Wizard has completed, click Finish . • Restart your computer after comp leted the steps ablove. The status of the newly created partition in the Disk Management window should change to Formatting and the percentage complete will be displayed.
Repeat the above procedure a s needed for any other par titions. Close the Data Management window by clicking on the small boxed “X” in the top right corner of the window. Click on the “My Comp uter” icon on the Desktop. The new drives will be visible and prop erly named.
• Double-click on Computer Management . • Select Disk Management un der Storage to view the disk drives . • Right-click on each Unallocated pa rtition and select New Partition from the pop-up menu (One by one). • Click Next to cr eate a partition on a basic disk.
• Select the part ition type you wa nt to create, than c lick Next . • Specify the partition size you want to create, than c lick Next . • Assign the drive letter or path yo u want to create, than clic k Next .
• Click Format this partition w ith the follow ing settings and Perform a quic k format , select the File system , Allocation unit size , Volume label , than click Next . • When the New Partition Wizard has completed, click Finish , a nd restart your computer.
The status of the newly created partition in the Disk Management window should change to Formatting and the percentage complete will be displayed. Depe nding upon the size of the partition, the format process may take several minutes. When c omplete , the status will change to “ Heal thy ＂ and the name and drive letter will be updated.
4.3 ALLOCA TING PA R T I T I O N ON WINDOWS VIST A (32/64BITS) Before creatin g any partitions, disk drive mod e must first be crea ted using the DIP switch on th e rear panel. Once the sets have been created , allow the system to load Windows. Once Windo ws is running, open the Computer Management window.
• Right-click on each Unallocated pa rtition and select New Simple Volume from the pop-up menu. • Click Next to create a si mple volume . • Select the Simple v olume size you want to create, than click Next .
• Assign the drive letter or path yo u want to create, than clic k Next . • Click Format this volume with the follow ing settings and Perform a quick format , sele ct the File sy stem , Allocation unit size , Volume label , than click Next . • When the New Simple Volume Wiz ard has completed, click Finish .
The status of the newly created partition in the Disk Management window should change to Formatting and the percentage complete will be displayed. Depe nding upon the size of the partition, the format process may take several minutes. When c omplete , the status will change to “ Heal thy ＂ and the name and drive letter will be updated.
4.4 ALLOCA TING PA R T I T I O N ON MACINT OSH OS X ‧ Click Go , than click on Utilities . ‧ Double-click Disk Utility to go to Disk Utility. DAS400 User’s Manual Ver.
‧ Select the dis k you want to p artition (On left sid e of the wind ow). ‧ Click Partition to go to partition w indow (On right side of the w indow).
‧ Select Volumes Scheme . ‧ Enter Volumes Information , than click Partition . DAS400 User’s Manual Ver. 071018 29.
‧ Confirm to partition the disk by click Partition . ‧ The new Single 1 disk has complete. ‧ Repeat t he abov e proce dure as needed f or any oth er disks . ‧ Close the Disk Utility window after complete setting. ‧ The new disks will appear on the desktop and ready for use.
5 F AQ If you need som e help for troubleshooting, please check th e frequently a sked question belo w, it may help you problem solved quic kly a Can not re cogni ze ． Make sure all cables have been connected pr operly. a Can no t oper ate in O/S ． Make sure the O/S is support for the product.
Een belangrijk punt na aankoop van elk apparaat Edge10 DAS400 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Edge10 DAS400 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Edge10 DAS400 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Edge10 DAS400 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Edge10 DAS400 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Edge10 DAS400 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Edge10 DAS400 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Edge10 DAS400 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
