Gebruiksaanwijzing /service van het product 1420Wi van de fabrikant Epson
Ga naar pagina of 366
BrightLink ® Pro 1420Wi/1430Wi User's Guide.
.
Contents BrightLink Pro 1420Wi/1430Wi User's Guide .......................................................................................... 13 Introduction to Your Projector ......................................................................
Connecting to a Computer for HDMI Video and Audio .............................................................. 63 Connecting to a Computer for Pen Use or USB Mouse Control ................................................ 64 Connecting to a Computer for Sound .
Selecting Wireless Network Settings Manually .............................................................................. 92 Wireless LAN Menu Settings .................................................................................................
Image Aspect Ratio .......................................................................................................................... 130 Changing the Image Aspect Ratio .........................................................................
Using the Interactive Features ............................................................................................................... 159 Interactive Modes ......................................................................................
Selecting Settings for Emailing Whiteboard Pages ................................................................. 203 Inserting a Document or Image From a Scanner ......................................................................... 205 Selecting a Networked Device Source .
Maintaining and Transporting the Projector ......................................................................................... 258 Projector Maintenance ............................................................................................
Solutions to Projector Power or Shut-Off Problems ..................................................................... 288 Solutions to Problems with the Remote Control........................................................................... 289 Solutions to Password Problems .
Notices ..................................................................................................................................................... 308 Recycling................................................................................
.
BrightLink Pro 1420Wi/1430Wi User 's Guide Welcome to the BrightLink Pro 1420Wi/1430Wi User's Guide . 13.
Introduction to Your Projector Refer to these sections to learn more about your projector and this manual. Projector Features Notations Used in the Documentation Where to Go for Additional Information.
Note: Color brightness (color light output) and white brightness (white light output) will vary depending on usage conditions. Color light output measured in accordance with IDMS 15.
Product Box Contents Save all the packaging in case you need to ship the projector. Always use the original packaging (or equivalent) when shipping. Make sure your projector box included all of these .
4 Pens and batteries (one AA alkaline battery for each pen) 5 Rubber feet (BrightLink Pro 1420Wi) 6 Pen tray 7 USB cables (3) 8 Power cord 9 Touch Unit connection cable (BrightLink Pro 1430Wi) 10 Pass.
Contact Apple for compatible adapter options. Older Mac computers (2009 and earlier) may not support audio through the HDMI port. • To receive an HDMI signal via MHL, you need an MHL-compatible device, an MHL cable or an HDMI cable and an MHL adapter compatible with your device.
Option or part Part number Epson DC-12 document camera (ELPDC12) V12H594020 Epson DC-20 document camera (ELPDC20) V12H500020 PowerLite Pilot 2 (ELPCB02) V12H614020 Active speakers (ELPSP02) V12H467020.
Register your product online using the projector CD or at this site: epson.com/webreg . Registering also lets you receive special updates on new accessories, products, and services.
Projector Part Locations Check the projector part illustrations to learn about the parts on your projector. Projector Parts - Front/Top Projector Parts - Side Projector Parts - Interface Panel Project.
6 Exhaust vent 7 Lamp cover screw 8 Lamp cover Parent topic: Projector Part Locations Projector Parts - Side 1 Filter cover switch 2 Security cable installation slot 3 Wireless LAN light 4 Interactive.
5 Obstacle sensor 6 Remote receiver 7 Projection window 8 Security lock port 9 Air filter cover 10 Air intake vent (air filter) 11 Focus lever Parent topic: Projector Part Locations Projector Parts - .
6 Monitor Out port 7 Network ( LAN ) port 8 HDMI 2 port 9 HDMI 1/MHL port 10 Audio port 11 RS-232C port 12 SYNC In/Out ports 13 Power inlet 14 TCH port for the Touch Unit connection cable (BrightLink .
Projector Parts - Base 1 Ceiling mount holes (5) 2 Security cable attachment point 3 Rear foot attachment points (2) (BrightLink Pro 1420Wi) 4 Wall mount plate holes (4) 5 Illumination sensor 6 Front .
Related tasks Installing the Projector Feet Projector Parts - Control Panel 1 Projector status lights 2 Source Search button (searches for connected video sources) 3 Enter button (selects options) 4 H.
Projector Parts - Interactive Pens and Pen Tray 1 Pen tip 2 Battery light 3 Power/function button 4 Attachment for optional strap or cord 5 Battery cover 27.
1 Installation magnets 2 Mounting holes 3 Security lock hole Parent topic: Projector Part Locations 28.
Projector Parts - Remote Control 29.
1 Power button 2 Capture button (captures the annotation screen and pastes it as a new whiteboard page) 3 Print button (prints the projected screen) 4 Numeric buttons (enter numbers) 5 Auto button (au.
Parent topic: Projector Part Locations Projector Parts - Touch Unit The Touch Unit comes with the BrightLink Pro 1430Wi projector only. Front (Cover On) Front (Cover Off) 1 Dial cover 2 TCH port 3 Sec.
Rear 1 Laser diffusion ports 2 Installation magnets 3 Guide markers (used for performing angle adjustment) Parent topic: Projector Part Locations 32.
Projector Parts - Control Pad 1 Power button 2 Whiteboard button (switches to whiteboard mode) 3 Source Search button (searches for connected sources) 4 Capture button (captures projected image in ann.
13 Light emitting areas (output remote control signals) 14 Bottom cover (open to connect a USB thumbdrive or other storage device) 15 Top cover (open to connect cables or replace batteries) 16 Cable c.
Setting Up the Projector Follow the instructions in these sections to set up your projector for use. Projector Placement Removing and Attaching the Cable Cover Adjusting the Angle of the Touch Unit In.
Mounted on the wall or ceiling Mounted vertically on a table to create an interactive workspace Wherever you set up the projector, make sure to position it squarely in front of the screen, not at an angle.
mount. You can also use the projector Throw Distance Calculator at epson.com/support (U.S.) or epson.ca/support (Canada). Note: All minimum ceiling heights are based on an image 30 inches (76 cm) from the floor. 16:10 Aspect Ratio Diagonal Min. ceiling Image Image height Min.
Diagonal Min. ceiling Image width Image height Min. projection Distance from top image height distance of image to wall size plate holes 60 inches 78.1 inches 52.3 inches 29.4 inches 2.9 inches 8.7 inches (22.0 cm) (198.3 cm) (132.8 cm) (74.7 cm) (7.3 cm) 70 inches 84.
Parent topic: Projector Placement Removing and Attaching the Cable Cover Before you can connect equipment to your projector, you need to remove the cable cover. 1. Remove both of the cable cover screws (screwdriver not included). 2. Slide off the cable cover.
Note: These instructions require that the Touch Unit is mounted and connected according to the Installation Guide provided with your projector or projector mount. 1. Turn the projector on. 2. Loosen the screw at the bottom of the Touch Unit. 3. Remove the dial cover from the Touch Unit.
4. Remove the markers from inside the Touch Unit. 5. Press the Menu button on the remote control or projector control panel. 6. Select Easy Interactive Function from the Extended menu.
7. Select Touch Unit Setup . 8. Make sure Power is set to On . 42.
The Touch Unit power turns on and the indicator light turns blue. Warning: Do not look into the projector's projection window or the Touch Unit's laser diffusion ports (located on the back of the Touch Unit); this could cause injury to eyesight.
10. Turn the adjustment dials on the Touch Unit counterclockwise until you hear a click. Press the button on the remote control. Note: Make sure to stop turning the dials when you hear the click. 11. Attach the two markers you removed from the Touch Unit to the marker positions shown on the projected screen ( ) ( ).
12. Match the positions so that the crosses (A) overlap with the points (B) on the marker positions ( ) ( ). Move the marker over the projected cross until the lines of the cross align with the lines on the marker.
• For non-magnetic screens: Use the supplied tape to secure the markets. Attach the tape so that each end of the marker is secure on the screen. Correct position: Incorrect position: Note: Do not place anything other than the markers near the projected image during angle adjustment.
14. Turn the adjustment dials on the Touch Unit to move the pointers so that they move inside of the target of the same color (blue and green) on either side. Turning an adjustment dial clockwise moves the pointer diagonally up towards the center of the projected image.
Turning an adjustment dial counterclockwise moves the pointer diagonally down away from the center of the projected image. When the pointers are inside the target, the colors become solid ( ) ( ) Note: If a dial makes a clicking sounds, the pointer will not move any further.
The next adjustment screen is displayed. 49.
16. Place the markers at the top marker positions [1]. When angle adjustment is performed correctly, the upper pointers become solid colors. If the upper pointers do not become solid colors, start again from step 9.
17. Place the markers at the bottom marker positions [2]. When angle adjustment is performed correctly, the bottom pointers become solid colors. If the bottom pointers do not become solid colors, start again from step 9. 18. When you have finished checking the marker positions, remove the markets and press the button on the remote control.
The following confirmation screen is displayed: 52.
19. Trace the dots with your finger as shown. When angle adjustment is performed correctly, the traced dots disappear. Note: Finger touch operations may not function correctly if you are wearing bandages, artificial nails, nail polish, or anything else that may obstruct your fingers.
• If the dots still remain or there are obstacles that cannot be removed, such as whiteboard trays or frames, go to step 21. 54.
21. If there is an obstacle that cannot be removed such as a whiteboard tray or frame, remove the tape from the back of the supplied infrared deflectors and stick them to the screen so that the laser is not reflected by the obstacle.
23. Perform touch calibration by pressing the Menu button on the remote control. On the Extended menu, select Easy Interactive Function , then select Touch Unit Setup .
24. After you have finished touch calibration, store the markers inside the Touch Unit. 57.
25. Attach the supplied labels to the tabs on either side of the Touch Unit. Match the center of the labels with the tabs on the Touch Unit. If the Touch Unit moves out of position, use the position of the labels to determine where to reposition the Touch Unit.
26. Attach the dial cover. Make sure to tighten the screw at the bottom of the cover. Parent topic: Setting Up the Projector Related references Touch Unit Safety Instructions Related tasks Calibrating.
2. Insert the larger front foot into the hole at the front of the projector. 1 Front foot (larger) 2 Rear feet 3. Insert the two smaller rear feet into the holes at the back of the projector.
Connecting to Computer Sources Connecting to Video Sources Connecting to an External Computer Monitor Connecting to External Speakers Connecting to External USB Devices Connecting a Printer to the Con.
1. Turn on your computer. 2. Connect the cable to your projector's USB-B port. 3. Connect the other end to any available USB port on your computer. 4. To use USB Display, do one of the following: • Windows 8.x : Click EPSON_PJ_UD in the upper right-corner, then select Run EMP_UDSE.
Note: To connect a Mac that includes only a Mini DisplayPort, Thunderbolt port, or Mini-DVI port for video output, you need to obtain an adapter that allows you to connect to the projector's VGA video port. Contact Apple for compatible adapter options.
2. Connect the other end to one of the projector's HDMI ports. Note: The projector converts the digital audio signal sent from your computer into a mono analog signal for the internal speaker or a stereo analog signal if you are connecting to external speakers.
If you want to use the remote control as a wireless mouse, you need to change the USB Type B setting in the projector's Extended menu. You may also need to configure your computer to work with an external USB mouse. See your computer documentation for details.
Caution: Make sure the control pad is positioned no more than 6.5 ft (2 m) away from the projector, and no obstacles are blocking the signal from the projector. Do not place the control pad behind the projection surface. Note: This also lets you use the interactive pens with your computer.
• OS X : The USB Display setup folder appears on your screen. Select USB Display Installer and follow the on-screen instructions to install the Epson USB Display software. Follow any on-screen instructions. You need to install this software only the first time you connect the projector to the computer.
Parent topic: Connecting to Video Sources Connecting to an MHL-Compatible Device If you have an MHL-compatible smartphone or tablet, you can connect it to the projector using either an MHL cable or an HDMI cable with a device-compatible MHL adapter. If you have a device with a built-in MHL connector, plug it directly into the HDMI 1/MHL port.
2. Connect the VGA connector to a Computer port on the projector. 3. Tighten the screws on the VGA connector. If your image colors appear incorrect, you may need to change the Input Signal setting in the projector's Signal menu.
Connecting to a Video Source for Sound You can play sound through the projector's speaker system if your video source has audio output ports. Connect the projector to the video source using a stereo mini-jack adapter cable (with one 3.5 mm mini- plug and two RCA plugs).
Note: Monitors that use a refresh rate less than 60 Hz may not be able to display images correctly. 1. Make sure your computer is connected to the projector's Computer port. 2. Connect the external monitor's cable to your projector's Monitor Out port.
2. Locate the appropriate cable to connect your external speakers, such as a stereo mini-jack-to-pin- jack cable, or another type of cable or adapter. 3. Connect one end of the cable to your external speakers as necessary. 4. Connect the stereo mini-jack end of the cable to your projector's Audio Out port.
Note: Digital cameras or smartphones must be USB-mounted devices, not TWAIN-compliant devices, and must be USB Mass Storage Class-compliant. Note: USB hard drives must meet these requirements: • USB.
Connecting a USB Device to the Control Pad or Projector You can connect your USB device to the USB-A port on the control pad or projector and use it to project images and other content. 1. If your USB device came with a power adapter, plug the device into an electrical outlet.
1. If the device has a power button, turn off and unplug the device. 2. Disconnect the USB device (or cable) from the control pad or projector. Parent topic: Connecting to External USB Devices Connect.
Supported Printer Types You can connect to a printer with the type and command language described here. Note: Scanning is only supported from Epson All-in-One printers over a USB connection.
• For the Epson DC-12 document camera, connect it to the projector's HDMI , Computer , or Video port and to the corresponding port on the document camera.
Note: If you are connecting three or more projectors, connect the projectors in a chain as shown. 2. In the Extended menu, set the Sync of Projectors setting to Wired .
2. Insert the batteries with the + and – ends facing as shown. 3. Close the battery cover and press it down until it clicks into place. Warning: Dispose of used batteries according to local regulations.
1. Open the battery cover as shown. 2. Insert the battery with the + and – ends facing as shown. 3. Replace the battery cover and press it down until it clicks into place. Parent topic: Setting Up the Projector Installing Batteries in the Control Pad The control pad uses two AA batteries.
Note: If you have the optional remote control cable set (ELPKC28), you can use it instead of batteries to power the control pad. 1. Remove the top cover of the control pad by prying it off as shown. 2. Insert the batteries with the + and – ends facing as shown.
3. Replace the cover and press it down until it clicks into place. Parent topic: Setting Up the Projector 82.
Using the Projector on a Network Follow the instructions in these sections to set up your projector for use on a network. Wired Network Projection Wireless Network Projection Setting Up Projector Netw.
Note: If your projector is connected via a LAN cable to a network that includes a wireless access point, you can connect to the projector wirelessly through the access point using the EasyMP Network Projection software.
3. Select the Network menu and press Enter . 4. Select Network Configuration and press Enter . 5. Select the Basic menu and press Enter . 85.
6. Select the following basic options as necessary: • Projector Name lets you enter a name up to 16 alphanumeric characters long to identify the projector over the network. • PJLink Password lets you enter a password up to 32 alphanumeric characters long for using the PJLink protocol for projector control.
• If you must set addresses manually, turn off DHCP and enter the projector's IP Address , Subnet Mask , DNS server , WINS server ,and Gateway Address as needed.
Setting Restricted IP addresses WINS Server 0.0.0.0 192.0.2.x 224.0.0.0 to 255.255.255.255 If you are not setting a WINS server, use 0.0.0.0. Parent topic: Selecting Wired Network Settings Wireless Network Projection You can send images to your projector through a wireless network.
Using Quick Wireless Connection (Windows Only) Selecting Wireless Network Settings Manually Selecting Wireless Network Settings in Windows Selecting Wireless Network Settings in OS X Enabling WPA or E.
2. Unscrew and remove the cable cover if it is attached (screwdriver not included). 3. Insert the wireless LAN module into the port shown here. 90.
4. Replace the cable cover and tighten the screws. 5. Plug in and turn on the projector. Parent topic: Wireless Network Projection Using Quick Wireless Connection (Windows Only) You can use the Quick Wireless Connection USB Key to quickly connect the projector to a Windows computer wirelessly.
5. Follow the on-screen instructions to install the Quick Wireless Connection driver. Note: If you see a Windows Firewall message, click Yes to disable the firewall.
4. Select Network Configuration and press Enter . 5. Select the Basic menu and press Enter . 6. Select the following basic options as necessary: • Projector Name lets you enter a name up to 16 alphanumeric characters long to identify the projector over the network.
7. Select the Wireless LAN menu and press Enter . 8. Select the settings on the Wireless LAN menu as necessary for your network. 9. When you finish selecting settings, select Setup complete and follow the on-screen instructions to save your settings and exit the menus.
Setting Options Description Wireless LAN System 802.11b/g Sets the type of wireless LAN system the projector is 802.11b/g/n connecting to Connection Mode Quick Selects the type of wireless connection: Advanced Quick : lets you quickly connect to one computer or use the optional Quick Wireless Connection USB key to connect.
Setting Options Description SSID Display On Selects whether to display the SSID on the network standby Off screen DHCP On Turns on DHCP if your network assigns addresses automatically; Off set to Off to manually enter the network's IP Address , Subnet Mask , and Gateway Address DNS Server IP address Sets the IP address for the DNS server.
Parent topic: Wireless Network Projection Selecting Wireless Network Settings in OS X Before connecting to the projector, select the correct wireless network in OS X.
3. When you finish selecting settings, select Setup complete and follow the on-screen instructions to save your settings and exit the menus. Wireless Security Menu Settings Parent topic: Wireless Netw.
Setting Options Description User name Various user names up to 64 For WPA/WPA2-EAP security, characters selects the user name; automatically detected when using the PEAP-TLS or EAP- TLS EAP methods Note: You can enter up to 32 characters in the projector menu.
Setting Options Description Setting RADIUS Server Name On For WPA/WPA2-EAP security, selects whether to verify the Off authentication server name during certificate verification RADIUS Server Name Various server names up to 32 For WPA/WPA2-EAP security, characters selects the server name to verify Verify Exp.
4. Select the Administrator Settings menu and press Enter , then select Mail Notification and press Enter . 5. Enter the IP address for the SMTP Server option. Note: Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255 (where x is a number from 0 to 255).
Parent topic: Using the Projector on a Network Network Projector E-mail Alert Messages When a problem occurs with a networked projector, and you selected to receive e-mail alerts, you receive an e-mai.
4. Select the Administrator Setting menu and press Enter , then select the SNMP menu and press Enter . 5. Enter up to two IP addresses to receive SNMP notifications, using 0 to 255 for each address field. Note: Do not use these addresses: 127.x.x.x or 224.
Note: If you want to use a web browser to select settings when the projector is turned off, you need to adjust the Standby Mode settings in the ECO menu. 1. Make sure the projector is turned on. 2. Start your web browser on a computer connected to the network.
2 Captures the projected image. Switch to whiteboard mode to paste the image into a new page. 3 Prints the projected image. 4 Freeze button control 5 A/V Mute button control 6 Page Up and Page Down button controls 7 Searches for sources 8 Switches to whiteboard mode.
2. Open a web browser and connect to the projector by entering the IP address of the projector. Note: You can find the projector's IP address in the projector's Network menu. 3. Enter the user name and password at the prompts. 4. Select the config icon.
• For the password, enter the default password admin . (You can change the Web Control password using the projector's Network menu.) 5. Under Whiteboard Settings , select Administrator Settings . You see a screen like this: 6. Under Template Settings , select the number of the template you are uploading.
Setting Up Crestron RoomView Support Controlling a Networked Projector Using Crestron RoomView Parent topic: Using the Projector on a Network Setting Up Crestron RoomView Support To set up your projector for monitoring and control using a Crestron RoomView system, make sure your computer and projector are connected to the network.
Parent topic: Crestron RoomView Support Controlling a Networked Projector Using Crestron RoomView Once you have set up your projector to use Crestron RoomView, you can control and monitor projection using a compatible web browser. 1. Start your web browser on a computer connected to the network.
7. When you finish selecting settings, click Exit to exit the program. Parent topic: Crestron RoomView Support 110.
Using Basic Projector Features Follow the instructions in these sections to use your projector's basic features. Turning On the Projector Turning Off the Projector Selecting the Language for the .
1. Connect the power cord to the projector's power inlet. 2. Plug the power cord into an electrical outlet. Note: With Direct Power On turned on, the projector turns on as soon as you plug it in. The projector's power light turns blue. This indicates that the projector is receiving power.
If you do not see a projected image right away, try the following: • Turn on the connected computer or video device. • Press the Source Search button on the projector or remote control to detect the video source.
Caution: Do not turn the projector on immediately after turning it off. Turning the projector on and off frequently may shorten the life of the lamp. 3. To transport or store the projector, make sure the Status light is off, then unplug the power cord.
3. Select the Extended menu and press Enter . 4. Select the Language setting and press Enter . 5. Select the language you want to use and press Enter .
The Schedule Settings screen appears. 4. Select the Date & Time setting and press Enter . 5. Do one of the following: • Enter the date and time settings using the on-screen keyboard. • Select On as the Use Internet Time setting and enter the IP address for the time server in the Internet Time Server field.
Parent topic: Using Basic Projector Features Related tasks Enabling WPA or EAP Security Related topics Scheduling Projector Events Image Shape You can project an evenly rectangular image by placing the projector directly in front of the center of the screen and keeping it level.
2. Press one of these keystone buttons on the control panel to display the Keystone adjustment screen. 118.
3. Press a keystone button on the projector's control panel to adjust the image shape. Note: The horizontal keystone adjustment buttons are labeled Wide and Tele .
Correcting Image Shape with Quick Corner You can use the projector's Quick Corner setting to correct the shape and size of an image that is unevenly rectangular on all sides. 1. Turn on the projector and display an image. Note: You can display a pattern to aid in adjusting the projected image using the Settings menu.
You see the Quick Corner adjustment screen: 6. Use the arrow buttons on the projector or the remote control to select the corner of the image you want to adjust. Then press Enter . 7. Press the arrow buttons to adjust the image shape as necessary. 8. When you are finished, press Esc .
3. To reduce the image size, press the Tele button. After you adjust the image size, the Image Shift screen is displayed automatically for adjusting the image position. Note: If the projector is installed out of reach, you can also adjust the image size with the remote control using the Zoom setting in the projector menus.
1. Turn on the projector and display an image. 2. Adjust the image size using the Wide and Tele buttons. After you adjust the image size, the Image Shift screen is displayed automatically. 3. Use the arrow buttons on the projector or remote control to adjust the image position.
3. Raise or lower the focus lever to sharpen the image. Parent topic: Using Basic Projector Features Related references Projector Feature Settings - Settings Menu Remote Control Operation The remote control lets you control the projector from almost anywhere in the room, up to 19.
Make sure that you aim the remote control at the projector's receivers within the angles listed here. 1 19.7 feet (6 m) 2 ± 30° 3 ± 55° 4 60° 5 75° 6 15° Note: Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or the projector may not respond to commands.
Using the Remote Control as a Wireless Mouse You can use the projector's remote control as a wireless mouse so you can control projection at a distance from the computer. Note: This feature cannot be used at the same time as the interactive pens.
Parent topic: Remote Control Operation Using the Remote Control as a Pointer You can use the projector's remote control as a pointer to help you call out important information on the screen. The default pointer shape is an arrow, but you can select an alternative shape using the Settings menu.
3. Press the Source Search button on the projector, remote control, or control pad, then select the source you want. Parent topic: Using Basic Projector Features Related tasks Selecting a Networked De.
• Front/Upside Down (default setting) flips the image over top-to-bottom to project upside-down from a wall or ceiling mount. This mode should also be used when you mount the projector vertically on a table to create an interactive work surface. • Rear flips the image horizontally to project from behind a translucent screen.
Parent topic: Projection Modes Changing the Projection Mode Using the Menus You can change the projection mode to flip the image over top-to-bottom and/or left-to-right using the projector menus. 1. Turn on the projector and display an image. 2. Press the Menu button.
If you always want to use a particular aspect ratio for a certain video input source, you can select it using the projector's menus. Changing the Image Aspect Ratio Available Image Aspect Ratios Parent topic: Using Basic Projector Features Changing the Image Aspect Ratio You can change the aspect ratio of the displayed image to resize it.
Aspect ratio setting Description Auto Automatically sets the aspect ratio according to the input signal and the Resolution setting. Normal Displays images using the full projection area and maintains the aspect ratio of the image. 16:9 Converts the aspect ratio of the image to 16:9.
3. Press the Color Mode button on the remote control to change the Color Mode. The image appearance changes and the name of the Color Mode appears briefly on the screen. 4. To cycle through all the available Color Modes for your input signal, press the Color Mode button repeatedly.
Note: The projector is not a medical device and cannot be used for medical diagnosis. Parent topic: Color Mode Related references Image Quality Settings - Image Menu Turning On Auto Iris In certain color modes, you can turn on the Auto Iris setting to automatically optimize the image based on the brightness of the content you project.
Parent topic: Color Mode Controlling the Volume with the Volume Buttons You can use the Volume buttons on the remote control to adjust the volume as you project a presentation with audio. The volume buttons control the projector’s internal speaker system or any external speakers you connected to the projector.
Supported PC Free File Types You can project these types of files using the projector's PC Free feature. Note: For best results, place your files on media that is formatted in FAT16/32. If you have trouble projecting from media formatted for non-Windows file systems, try formatting the media for Windows instead.
File type Movie codec Audio codec Recording quality (extension) .mpg MPEG-2 MPEG-1 Layer 1/2 Maximum bit rate: 12 Mbps You can play back MPEG Maximum resolution: 1280 × contents with no audio. 720 You cannot play back audio from Linear PCM and AC-3 content.
The PC Free screen appears. 3. Do the following as necessary to locate your files: • If you need to display files inside a subfolder on your device, press the arrow buttons to highlight the folder and press the Enter button. • To move back up a folder level on your device, highlight Back to Top and press Enter .
5. While projecting, use the following commands to control the display as necessary: • To rotate a displayed image, press the up or down arrow button. • To move to the next or previous image, press the left or right arrow button. 6. To stop the display, follow the on-screen instructions or press the Esc button.
2. Do the following as necessary to locate your files: • If you need to display files inside a subfolder on your device, press the arrow buttons to highlight the folder and press the Enter button. • To move back up a folder level on your device, highlight Back to Top and press Enter .
The PC Free screen appears. 2. Do the following as necessary to locate your files: • If you need to display files inside a subfolder on your device, press the arrow buttons to highlight the folder and press the Enter button. • To move back up a folder level on your device, highlight Back to Top and press Enter .
• To display a menu of pages to select from, press the Esc button. Then press the left or right arrow button to select a page and press Enter . • To enlarge the view of a page to fit the screen, press Enter . Press Enter again to return to standard size display.
Setting Options Description Screen Switching No Does not display the next file automatically Time 1 Second to 60 Seconds Displays files for the selected time and switches to the next file automaticall.
Adjusting Projector Features Follow the instructions in these sections to use your projector's feature adjustments. Shutting Off the Picture and Sound Temporarily Stopping Video Action Temporaril.
Stopping Video Action Temporarily You can temporarily stop the action in a video or computer presentation and keep the current image on the screen. Any sound or video action continues to run, however, so you cannot resume projection at the point that you stopped it.
1. Press the E-Zoom + button on the remote control. You see a crosshair on the screen indicating the center of the zoom area. 2. Use the following buttons on the remote control to adjust the zoomed image: • Use the arrow buttons to position the crosshair in the image area you want to zoom into.
Related tasks Setting a Password Saving a Scheduled Event You can select projector commands you want to perform and schedule them as an event. 1. Press the Menu button. 2. Select the Extended menu and press Enter . 3. Select the Time/Schedule Settings setting and press Enter .
4. Select Schedule . The Schedule Settings screen is displayed. Colored boxes on the calendar indicate the following: One-time event Repeating event Communication is on or off Event is invalid 5. To view an event, press the left and right arrow buttons on the remote to select a day.
3. Select Time/Schedule Settings . 4. Select Schedule . The Schedule Settings screen is displayed. Colored boxes on the calendar indicate the following: One-time event Repeating event Communication is on or off Event is invalid 5. To edit an event, press the up and down arrow buttons on the remote to highlight an event.
Related references Projector Setup Settings - Extended Menu Projector Security Features You can secure your projector to deter theft or prevent unintended use by setting up the following security features: • Password security to prevent the projector from being turned on, and prevent changes to the startup screen and other settings.
Setting a Password To use password security, you must set a password. 1. Hold down the Freeze button on the remote control for about ten seconds or until you see this menu. 2. Press the down arrow to select Password and press Enter . You see the prompt "Change the password?".
7. Make a note of the password and keep it in a safe place in case you forget it. Parent topic: Password Security Types Selecting Password Security Types After setting a password, you see this menu, allowing you to select the password security types you want to use.
Projector Network Settings - Network Menu Related tasks Turning On the Projector Saving a User's Logo Image to Display Related topics Scheduling Projector Events Entering a Password to Use the Pr.
The password screen closes. 2. If the password is incorrect, the following may happen: • You see a "wrong password" message and a prompt to try again. Enter the correct password to proceed. • If you enter an incorrect password several times in succession, the projector displays a request code and a message to contact Epson Support.
3. Select the User's Logo setting and press Enter . You see a prompt asking if you want to use the displayed image as a user's logo. 4. Select Yes and press Enter .
12. Select when you want to display the User's Logo screen: • To display it whenever there is no input signal, select Display Background and set it to Logo . • To display it whenever you turn the projector on, select Startup Screen and set it to On .
• To lock all buttons except the power button, select Partial Lock . You see a confirmation prompt. 5. Select Yes and press Enter . Unlocking the Projector's Buttons Parent topic: Projector Sec.
Creating a User Pattern to Display You can transfer an image to the projector and then display it as a pattern to aid in presentations when you use the Pattern Display feature. This transferred image is called the User Pattern. 1. Display the image you want to project as the User Pattern from a connected computer or video source.
Using the Interactive Features Follow the instructions in these sections to use your projector's interactive features. Interactive Modes Using the Interactive Pens Using Finger Touch Interactivit.
Annotation Mode (PC Free) Using the Interactive Pens The BrightLink interactive pens turn any wall into an interactive whiteboard, either with or without a computer. • With a computer, you can use Easy Interactive Tools. This software lets you use the pen as a mouse to annotate, save, and interact with content from your computer.
Note: The pen turns off automatically after 20 minutes of inactivity. Tap the pen tip or press the button on the side to turn the pen back on. 1 Pen tip 2 Battery light 3 Power/function button 4 Attachment for optional strap or cord 5 Battery cover • To turn on the pen, tap the pen tip or press the power/function button.
• For best performance, hold the pen perpendicular to the board, as shown below. Do not cover the black section near the tip of the pen. • To write or draw on the projection surface in annotation mode or whiteboard mode, do the following: • To select a projected item, such as an icon, tap the projection surface with the pen tip.
• To use the pen as a mouse in PC Interactive mode, do the following: • To left-click, tap the board with the pen tip. • To double-click, tap twice. • To right-click, press the power/function button on the side. • To click and drag, tap and drag with the pen.
• Using the Image Shift feature • Moving the projector Note: Move any pen you are not using away from the projection screen while calibrating. Calibrating Automatically Calibrating Manually Parent.
2. Select the Easy Interactive Function setting and press Enter . 3. Select Auto Calibration and press Enter . 4. Adjust the image focus, if necessary. 5. Press Enter to select Yes . A pattern appears then disappears, and the system is calibrated. If you see a message that calibration failed, you need to calibrate manually.
The cursor location and pen position should match after calibration. If not, you may need to calibrate manually. Parent topic: Pen Calibration Calibrating Manually If the cursor location and pen position do not match after auto calibration, you can calibrate manually.
3. Select Manual Calibration and press Enter . 4. Adjust the image focus, if necessary. 5. Press Enter to select Yes . A flashing green circle appears in the upper left corner of your projected image. 6. Touch the center of the circle with the tip of the pen.
Note: For the most accurate calibration, make sure you touch the center of the circle. 7. Touch the center of the next circle, then repeat. When you get to the bottom of the column, the next circle appears at the top of a new column.
Using Finger Touch Interactivity You can use your finger to perform the same functions as the interactive pens when you install the Touch Unit (BrightLink Pro 1430Wi). Note: See the Installation Guide for detailed instructions on installing the Touch Unit.
Follow these precautions when using the Touch Unit and finger touch interactivity: • Children using finger touch interactivity should always be accompanied by an adult. • Never disassemble or modify the Touch Unit. • Do not look into the laser diffusion ports on the back of the Touch Unit.
Parent topic: Using Finger Touch Interactivity Calibrating for Finger Touch Interactivity Finger touch calibration coordinates the positioning of your finger with the location of the cursor (BrightLink Pro 1430Wi). Note: Make sure you have calibrated the pens before calibrating for finger touch interactivity.
2. Select the Easy Interactive Function setting and press Enter . 3. Select Touch Unit Setup and press Enter . 4. Select Touch Calibration and press Enter .
The following screen appears: 5. Adjust the image focus, if necessary. 6. Press Enter to select Yes . A flashing green circle appears in the upper left corner of your projected image. 7. Touch and hold the center of the circle with your finger until the circle disappears and another circle appears, then release it.
Note: For the most accurate calibration, make sure you touch the center of the circle with the tip of your finger. Note: Make sure you are not blocking the signal between your finger and the interactive receiver (next to the projection window on the projector).
Parent topic: Using Finger Touch Interactivity Related tasks Adjusting the Angle of the Touch Unit Using Finger Touch Operations Using Finger Touch Operations You can use your finger to interact with the projected screen, just as you would use an interactive pen (BrightLink Pro 1430Wi).
6. To write or draw on the projection surface in annotation mode or whiteboard mode, do the following: • To select a projected item, such as an icon, tap the projection surface with your finger. • To draw on the projected screen, tap the projection surface with your finger and drag it as necessary.
• To drag up or down on a page, or move backward or forward in a browser window, use swiping gestures or flicks. Note: Finger touch operations may not work correctly with long or artificial nails, or fingers wearing bandages. If your fingers are too close together or crossed, or your sleeve touches the screen, finger touch may not be recognized.
Note: Easy Interactive Driver must be installed and running to use Easy Interactive Tools on a Mac. Requirement Windows Mac Operating system Windows XP Professional SP2 or later, OS X 10.5.x, 10.6.x, OS X 10.7.x, Home Edition 10.8.x, 10.9.x (32-bit) OS X 10.
Controlling Computer Features from a Projected Screen (PC Interactive Mode) You can navigate, select, and interact with your computer programs from the projected screen using the interactive pens or your finger (BrightLink Pro 1430Wi) just as you would a mouse.
7. Select the Easy Interactive Function setting and press the Enter button. 8. Select one of the following as the Pen Operation Mode depending on your projector model and computer operating system (Br.
11. Select the icon, then select the icon. You can now operate the computer using the interactive pens or your finger (BrightLink Pro 1430Wi). Parent topic: Using BrightLink With a Computer Adjusting .
3. Select the Easy Interactive Function setting and press Enter . 4. Select Advanced in the PC Interactive section and press Enter . 5. Select Manual Adj.
You see this screen: 6. Press Enter to select Yes . The mouse pointer moves toward the top left corner. 7. When the mouse pointer stops at the top left corner of the image, touch the tip of the pointer with the interactive pen. The mouse pointer moves toward the bottom right corner.
Parent topic: Using BrightLink With a Computer Windows Pen Input and Ink Tools If you are using Windows 8.x, Windows 7, or Windows Vista, you can use the pen input and Ink tools to add input and annotations to your work. You can also use these features over a network when you set the interactive features to be available on your network.
2. Select the Easy Interactive Function setting and press Enter . 3. Select Pen Operation Mode and press Enter . 4. Select one of the following: • One User/Pen (BrightLink Pro 1420Wi) • Mode 1 or .
• Mode 2 when using pen input (BrightLink Pro 1430Wi) Parent topic: Windows Pen Input and Ink Tools Using Windows Pen Input and Ink Tools If you are using Windows 8.x, Windows 7, or Windows Vista, you can add handwritten input to your work and convert it to text.
• To annotate your PowerPoint slides in Slideshow mode, press the button on the side of the interactive pen or press the projection surface with your finger (BrightLink Pro 1430Wi) for about 3 seconds, and select Pointer Options > Pen from the pop-up menu.
Using the Whiteboard Toolbars You can use both pens at the same time in whiteboard mode. 1. Press the Whiteboard button on the remote control or control pad. You see the whiteboard screen, with the main toolbar and the bottom toolbar: 2. To move the main toolbar to the other side of the screen, select the arrow.
Parent topic: Whiteboard Mode The Main Whiteboard Toolbar The main whiteboard toolbar lets you draw, write, and insert images and backgrounds. The toolbar also lets you easily switch to PC Free annotation or computer interactive mode.
Redo the last undo Select all objects in a rectangular area Select all objects in a freehand area Turn the pen into a draggable pointer Capture the selected area as an image Insert a .
Blue pen (fine point on left, thick on right) Eraser (thin width on left, thick on right) Clear all content on page Displays the current color and mode for both interactive pens and finger (BrightLink.
Related references The Bottom Whiteboard Toolbar Related tasks Adding Templates from a Web Browser Zooming Images in Whiteboard Mode You can use the pen to zoom in and pan around your enlarged image, then zoom out when you are done. 1. Select the Zoom tool on the bottom toolbar.
3. Once you have selected the image, select either the Rectangle Select or Free Select tool and do any of the following as necessary: • To move the image, touch inside it and drag with the pen. • To resize the image, touch any corner and drag inward to shrink or outward to enlarge.
Selecting Line Width and Color You can select the color and line width for both the custom Pen and the Highlighter tools. 1. Select the icon next to the custom Pen or Highlighter annotation tool. 2. Select the line width and color you want to use for the Pen or Highlighter tools.
Delete the current page Open a new page. The current page appears as a thumbnail on the bottom toolbar. Display the previous page thumbnail Display the next page thumbnail Print one or more pages Save.
Display a help screen for the toolbar functions Show or hide bottom toolbar Parent topic: Whiteboard Mode Related tasks Selecting Background Templates Zooming Images in Whiteboard Mode Selecting a Net.
1. Press the Menu button on the remote control. 2. Select the Extended menu and press Enter . 3. Select Whiteboard Settings and press Enter . 4. Select Basic and press Enter .
5. Select the following basic options as necessary: • Administrator Password lets you enter a password up to 16 alphanumeric characters long for controlling whiteboard settings. This password is also used for network settings. • Clock Display Settings lets you control the date and time display on the bottom whiteboard toolbar.
Data setting determines how often whiteboard pages are backed up automatically in case of a power outage. 8. When you finish selecting settings, select Setup Complete and follow the on-screen instructions to save your settings and exit the menus.
4. Select Print and press Enter . 5. Select the following printing options as necessary: • Default Printer lets you select either USB or Network for the printer connection. You can change this setting when you print in whiteboard mode, but not in annotation mode.
Related references Projector Setup Settings - Extended Menu Supported Printer Types Related tasks Connecting a Printer to the Control Pad Selecting Settings for Saving Whiteboard Pages You can select the default settings for saving whiteboard pages from the projector.
4. Select Save and press Enter . 5. Select the following options for saving as necessary: • Default Save Location lets you select either USB or Network for saving on a USB thumb drive or network folder. You can change this setting when you save in whiteboard mode, but not in annotation mode.
• User name lets you set the a user name with read/write privileges on the network folder. You can enter up to 64 alphanumeric characters. You can enter a domain name by adding it before the user name and separating them with a backslash (domainusername).
4. Select Mail and press Enter . 5. Select the following options for emailing as necessary: • SMTP Server let you enter the IP address or host name for the mail server. You can enter up to 63 alphanumeric characters. If you specify a host name, you must configure a DNS server.
• Send a test e-mail connects to the SMTP server and sends a test email to the address you set as the default. Note: Use the displayed keyboard to enter the addresses. Press the arrow buttons on the remote control to highlight numbers or characters and press Enter to select them.
You see the Scan screen: 3. Select the following settings: • Select Color or Monochrome • Select the orientation for the scanned document. • Under ADF, select On if you placed your document in the automatic document feeder. 4. Select Advanced to access additional options.
1. Select the Source Select icon on the projector control toolbar. An image source list appears. 2. Select Participant List . You see a list of available devices.
3. Select the user name for the device from which you want to project. Note: Select Refresh to update the user list. 4. Select Return . You see the screen image from the selected device. Parent topic: Whiteboard Mode Related references The Bottom Whiteboard Toolbar Saving Pages in Whiteboard Mode You can save your pages as .
5. Select the location where you want to save the file by selecting the Location field. Choose either a USB or Network location and navigate to the target folder, then select OK . 6. If sharing the whiteboard, select Distribute to all participants to temporarily save the file and make it available for download through a web browser.
3. Do any of the following as necessary: • To add a new page, select the New page icon. A blank page opens, and this page appears as the current thumbnail on the bottom toolbar. • To duplicate the current page, select the icon. The duplicate page appears after the last page displayed.
You see a screen like the following: 5. Select any of the following settings: • Printer to choose between a USB and Network printer connection • Paper Size to choose the size paper loaded in the p.
Your page or pages are printed. Parent topic: Whiteboard Mode Related references The Bottom Whiteboard Toolbar Emailing Your Whiteboard Pages If your projector is set up on your network, you can email your pages directly from the projector. Note: Mail server settings must be configured before you can email from the projector.
5. Use the on-screen keyboard to enter the subject that you want to appear on the Subject line. 6. Use the on-screen keyboard to enter a file name for the attachment. 7. Select the file format for emailing. If you choose PDF or EWF (Epson Whiteboard Format), you can encrypt the file and add a password.
Starting a Shared Whiteboard Session You can share the whiteboard with up to 15 devices on the same network SSID, including other projectors that support whiteboard sharing, computers, and other devices. Note: In order to share the whiteboard, the projector must be set up on a network, and your network administrator must have opened TCP port 80.
4. When connecting to the shared whiteboard, users must enter the PIN code. If you want to set your own PIN code, select the PIN code field and enter a new 7-digit code. Note: After you share the whiteboard, you cannot change the PIN code unless you restart the whiteboard sharing session.
8. Select Stop sharing this whiteboard to end the whiteboard sharing session. 9. Select Close . Parent topic: Sharing the Whiteboard Related references The Bottom Whiteboard Toolbar Related tasks Sele.
Operating Browser version Screen resolution of connected device or system computer Android Android OS 4.0 or later standard Up to 1024 × 768 (4:3 aspect ratio) browser Up to 1280 × 600 (16:9 aspect .
Tool icon Description Selects a translucent highlighter pen for drawing Selects a shape to place on the screen Selects the eraser tool so you can click on content and select OK to delete it; you canno.
Tool icon Description Creates a new whiteboard page * Images must be JPG or PNG, with a resolution up to 2048 × 2048. Parent topic: Sharing the Whiteboard Connecting to a Shared Whiteboard from a Projector You can connect another projector on the same network to a projector that is sharing its whiteboard.
4. Enter the IP address and PIN code for the projector you want to connect to. Note: To display the addresses for the last five projector connections, select the arrow icon next to the address field. 5. Press the Connect button. Both projectors display the shared whiteboard screen.
You see the main toolbar on the side and the projection control toolbar on the bottom of the projected image. 3. To move the main toolbar to the other side of the screen, tap the arrow on the opposite side of the screen. Note: You can use the pen or your finger (BrightLink Pro 1430Wi) to move the arrow icon up or down to reposition the toolbar.
6. To show or hide the projection control toolbar, select the arrow. Parent topic: Annotation Mode (PC Free) Related references The Main Annotation Toolbar The Bottom Annotation Toolbar Related tasks .
3. To move the main toolbar to the other side of the screen, select the arrow. Note: You can use the pen to move the arrow icon up or down. 4. To switch to one of the other modes, do one of the following: • To switch to whiteboard mode, select the Whiteboard tool.
The Main Annotation Toolbar The main annotation toolbar lets you draw and write on your projected image. The toolbar also lets you easily switch to whiteboard or computer interactive mode.
Redo the last undo Change custom pen color and width Write or draw free-form lines with custom pen Change highlighter pen color Write or draw free-form lines with transparent highlighter pen Black pen.
Zooming Images in Annotation Mode You can use the pen to zoom in on a portion of your image, the same as you can using the E-Zoom button on the remote control. 1. Select the Zoom tool. 2. Do one of the following to adjust the image if necessary: • Press and drag on the screen to pan around the enlarged area.
Stops projection and mutes audio. Touch the screen again to restore the image and sound. Pauses video. Split the screen and project two images. When the screen is split, select the tool again to return to a single image.
Saving Images in Annotation Mode You can save your images as .png files in the default location set in the projector's menu system. 1. Press the Save button on the control pad or remote control, or select the Save tool on the bottom annotation toolbar.
You see a screen like this: 3. Select the two sources you want to display. Not all combinations of sources are valid. If you want to write on a blank screen, select any unused source. Unused sources display the color selected in the Display Background setting.
• To use PC interactive mode on the right screen, press the Menu button on the remote control, select Target Pen Mode , and select Screen Right . Set the Pen Mode setting to PC Interactive . Note: If you select Video , USB1 , or USB2 as a source, you cannot use PC interactive mode.
Adjusting the Menu Settings Follow the instructions in these sections to access the projector menu system and change projector settings. Using the Projector's Menus Image Quality Settings - Image.
1. Press the Menu button on the control panel or remote control. You see the menu screen displaying the Image menu settings. 232.
2. Press the up or down arrow buttons to move through the menus listed on the left. The settings for each menu are displayed on the right. Note: The available settings depend on the current input source. 3. To change settings in the displayed menu, press Enter .
Image Quality Settings - Image Menu Settings on the Image menu let you adjust the quality of your image for the input source you are currently using. The available settings depend on the currently selected input source. To change settings for an input source, make sure the source is connected and select that source.
Setting Options Description Color Temp. (color temperature) High Sets the overall color tone; High tints the image blue and Low Medium tints the image red Low Advanced Various options available Adjust.
Input Signal Settings - Signal Menu Normally the projector detects and optimizes the input signal settings automatically. If you need to customize the settings, you can use the Signal menu. The available settings depend on the currently selected input source.
Setting Options Description Sync. Varying levels available Adjusts signal to eliminate fuzziness or flickering in computer images Position Up, down, left, right Adjusts the image location on the scree.
Setting Options Description Input Signal Auto Specifies the signal type from input sources connected to RGB computer ports Component Auto : detects signals automatically RGB : corrects color for compu.
Projector Feature Settings - Settings Menu Options on the Settings menu let you customize various projector features. Setting Options Description Keystone H/V Keystone Adjusts image shape to rectangul.
Setting Options Description Control Panel Lock Full Lock Controls projector button locking to secure the projector Partial Lock Full Lock : locks all buttons Off Partial Lock : locks all buttons excep.
Setting Options Description Pattern Pattern Display Selects various pattern display options Pattern Type Pattern Display : lets you display User Pattern the selected pattern type on the Test Pattern s.
Projector Setup Settings - Extended Menu Settings on the Extended menu let you customize various projector setup features that control its operation. Easy Interactive Function Settings Setting Options.
Setting Options Description Touch Unit Setup Installation Pattern Select settings for the Touch Unit (BrightLink Pro 1430Wi) Power Installation Pattern : displays reference points to help you Angle Ad.
Setting Options Description Advanced Distance of Projectors Selects various settings for interactive features Sync of Projectors Distance of Projectors , Sync of Wired Sync Mode Projectors , and Wired.
Setting Options Description Enable Right Click On Lets you use a long pen press or finger press (BrightLink Pro Off 1430Wi) as a right-click operation when using mouse mode Advanced Pen Tip Button Select pen operation and adjustment options Auto Adjust Pen Area Pen Tip Button : assign either Manual Adj.
Setting Options Description Display Messages Selects various display options Display Background Messages : controls whether messages are displayed on the Startup Screen screen A/V Mute Display Backgro.
Setting Options Description Projection Front Selects the way the projector faces the screen so the image is Front/Upside Down oriented correctly Rear Rear Upside Down Operation Direct Power On Selects.
Setting Options Description A/V Settings A/V Output Selects the following when the projector is in standby mode Audio Output (turned off): HDMI1 Audio Output A/V Output : The Always On HDMI2 Audio Output setting lets the projector output audio and video signals even while it is standby mode.
Setting Options Description USB Type B Easy Interactive Function Selects what happens when you connect your computer to the USB Display/Easy Interactive projector's USB-B port Function Easy Inter.
Related tasks Connecting to a Computer for Pen Use or USB Mouse Control Turning On the Projector Selecting the Language for the Projector Menus Changing the Projection Mode Using the Menus Saving a Sc.
Setting Options Description Net. Info - Wireless LAN Connection mode Displays wireless network status and details Wireless LAN Sys. Antenna level Projector Name SSID DHCP IP Address Subnet Mask Gateway Address MAC Address Net.
Projector Setup Settings - ECO Menu Settings on the ECO menu let you customize projector functions to save power. When you select a power-saving setting, a leaf icon appears next to the menu item.
Setting Options Description Sleep Mode On Automatically places the projector in standby mode after Off an interval of inactivity Sleep Mode Timer 1 to 30 minutes Sets the interval for Sleep Mode A/V M.
Projector Information Display - Info Menu You can display information about the projector and input sources by viewing the Info menu. However, you cannot change any settings in the menu. Select Version to display the projector's firmware version.
Information item Description Refresh Rate Displays the refresh rate of the current input source Sync Info Displays information that may be needed by a service technician Status Displays information ab.
Event ID code Cause and solution 0479 A projector system error has occurred. Turn the projector off and then on again. 04FF 0891 Cannot find an access point with the same SSID. Set your computer, access point, and projector to the same SSID. 0892 The WPA/WPA2 authentication type does not match.
Projector Reset Options - Reset Menu You can reset most of the projector settings to their default values using the Reset All option on the Reset menu. You can also reset the projector's lamp usage timer to zero when you replace the lamp using the Reset Lamp Hours option.
Maintaining and Transporting the Projector Follow the instructions in these sections to maintain your projector and transport it from place to place. Projector Maintenance Transporting the Projector Projector Maintenance Your projector needs little maintenance to keep working at its best.
• To remove stubborn smudges, moisten a soft, lint-free cloth with lens cleaner and gently wipe the projection window. Warning: Do not use a lens cleaner that contains flammable gas. The high heat generated by the projector lamp may cause a fire. Caution: Do not use canned air, or the gases may leave a flammable residue.
Caution: Do not use canned air, or the gases may leave a flammable residue. Parent topic: Projector Maintenance Related tasks Turning Off the Projector Cleaning the Projector Case Before cleaning the projector case, turn off the projector and unplug the power cord.
1. Turn off the projector and unplug the power cord. 2. Slide the air filter cover latch and open the air filter cover. 261.
3. Pull the air filter out of the projector. 4. Vacuum the front of the air filter (the side with the tabs) to remove any remaining dust. Note: If dust is difficult to remove or the air filter is damaged, replace the air filter.
5. Place the air filter back in the projector as shown. 6. Close the air filter cover. Parent topic: Air Filter and Vent Maintenance Related tasks Turning Off the Projector Replacing the Air Filter Yo.
2. Slide the air filter cover latch and open the air filter cover. 264.
3. Pull the air filter out of the projector. Note: Air filters contain polypropylene. Dispose of used air filters according to local regulations. 265.
4. Place the new air filter in the projector as shown. 5. Close the air filter cover. Parent topic: Air Filter and Vent Maintenance Related tasks Turning Off the Projector Projector Lamp Maintenance The projector keeps track of the number of hours the lamp is used and displays this information in the projector's menu system.
Parent topic: Projector Maintenance Replacing the Lamp Before you replace the lamp, let the projector cool down for at least one hour so the lamp will not be hot. Warning: Let the lamp fully cool before replacing it to avoid injury. You can replace the lamp while the projector is mounted on the wall or ceiling.
4. Slide off the lamp cover. 5. Loosen the screws securing the lamp to the projector. The screws do not come all the way out. 268.
6. Lift up the lamp handle and gently pull the lamp out of the projector. Note: The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash. 7. Gently insert the new lamp into the projector along the guide rail.
8. Tighten the screws to secure the lamp. 9. Replace the lamp cover and tighten the screw to secure it. Note: Be sure the lamp cover is securely installed or the lamp will not come on.
Reset the lamp timer to zero to keep track of the new lamp’s usage. Parent topic: Projector Lamp Maintenance Related tasks Turning Off the Projector Resetting the Lamp Timer Resetting the Lamp Timer.
Parent topic: Projector Lamp Maintenance Replacing the Remote Control Batteries The remote control uses two AA manganese or alkaline batteries. Replace the batteries as soon as they run out. Caution: Use only the type of batteries specified in this manual.
3. Insert the batteries with the + and – ends facing as shown. 4. Close the battery cover and press it down until it clicks into place. Warning: Dispose of used batteries according to local regulations.
When the battery is low, the pen light flashes as you turn on the switch. When the battery runs out, the pen light goes out. Caution: Use only the type of batteries specified in this manual. 1. Open the battery cover as shown. 2. Remove the old battery.
4. Replace the battery cover and press it down until it clicks into place. Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat or flame. Keep batteries out of the reach of children; they are choking hazards and are very dangerous if swallowed.
2. Twist on the new tip. Parent topic: Projector Maintenance Transporting the Projector The projector contains precision parts, some of which are glass. Follow these guidelines to transport or ship the projector safely: • Remove any equipment connected to the projector.
Solving Problems Check the solutions in these sections if you have any problems using the projector. Projection Problem Tips Projector Light Status Using the Projector Help Displays Solving Image or S.
Projector Light Status The lights on the projector indicate the projector status and let you know when a problem occurs. Check the status and color of the lights and look for a solution in the table here.
Power light Status light Lamp light Temp light Status and solution Blue Off Off Off Standby or sleep mode. Network monitoring mode. The projector is being monitored and controlled over the network. Off Flashing blue Off Orange Projector has overheated and turned off.
Power light Status light Lamp light Temp light Status and solution Off Flashing blue Off Flashing A fan or sensor has a problem. Turn orange the projector off, unplug it, and contact Epson for help. Off Flashing blue Flashing Flashing Auto Iris error.
3. Use the up and down arrow buttons to highlight the problem you want to solve. Note: You can also display image adjustment recommendations by pressing the left arrow button. 4. Press Enter to view the solutions. 5. When you are finished, do one of the following: • To select another problem to solve, press Esc .
• Adjust the Brightness setting or select the Normal Power Consumption setting. • Check the Display setting to make sure Messages is set to On . • If the projector does not respond when you press the control panel buttons, the buttons may be locked.
Related references Projector Setup Settings - Extended Menu Related tasks Selecting an Image Source Solutions When "No Signal " Message Appears If the "No Signal" message appears, try the following solutions: • Press the Source Search button and wait a few seconds for an image to appear.
4. If necessary, check your video card settings and set the multiple display option to Mirror or Duplicate . Parent topic: Solutions When "No Signal" Message Appears Displaying From a Mac Laptop If you see the "No Signal" message when you display from a Mac laptop, you need to set up the laptop for mirrored display.
• Check the resolution assigned to your presentation files to see if they are created for a different resolution than you are projecting in. (See your software help for details.
• Check the settings on the projector's Signal menu to make sure they match the video source. • Select a computer video resolution and refresh rate that are compatible with the projector.
Solutions When the Image Brightness or Colors are Incorrect If the projected image is too dark or light, or the colors are incorrect, try the following solutions: • Press the Color Mode button on the remote control to try different color modes for the image and environment.
• Check the audio cable connections between the projector and your video source. • If you do not hear sound from an HDMI source, set the connected device to PCM output. • Make sure any connected audio cables are labeled "No Resistance".
• The projector's buttons may be locked for security. Unlock the buttons or use the remote control to turn on the projector. • The power cord may be defective. Disconnect the cord and contact Epson. • If the projector's lamp shuts off unexpectedly, it may have entered standby mode after a period of inactivity.
Parent topic: Solving Projector or Remote Control Operation Problems Related references Remote Control Operation Related tasks Replacing the Remote Control Batteries Solutions to Password Problems If you cannot enter or remember a password, try the following solutions: • You may have turned on password protection without first setting a password.
Solutions When Finger Touch Interactivity Does Not Work Solutions for Problems With Capturing, Printing, Saving, or Scanning Solutions When Inking Does Not Appear in Microsoft Office Solutions When th.
• Make sure you have calibrated the system. Try recalibrating. • If you are projecting from a laptop computer, make sure the battery has enough power, or connect the laptop to a power outlet. • Make sure the Pen Mode and Pen Operation Mode settings are set correctly in the Easy Interactive Function options on the Extended menu.
Solutions When Manual Calibration Does Not Work If you are having trouble calibrating manually, try the following solutions: • If the circle does not move to the next position, or it moves automatically, dim or turn off any bright lights near the projection surface.
Parent topic: Solving Interactive Problems Related references Projector Setup Settings - Extended Menu Solutions When Finger Touch Interactivity Does Not Work If finger touch interactivity does not wo.
• For USB printing or scanning, make sure a USB cable is connected between the projector's USB-A port and the USB-B port on the control pad. Make sure another USB cable is connected between the Printer port on the control pad and the printer itself.
Solutions When the Pen Does Not Work Over a Network or the Toolbars Do Not Appear If you are having trouble using the pen with a network connection, or the toolbars do not appear on your projected ima.
Projector Network Settings - Network Menu Solutions When You Cannot Access the Projector Through the Web If you are unable to access the projector through a web browser, make sure you are using the correct ID and password, which are case sensitive. • For the user ID, enter EPSONWEB .
Internet Support Visit Epson's support website at epson.com/support (U.S.) or epson.ca/support (Canada) for solutions to common problems with your projector. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions.
Technical Specifications These sections list the technical specifications of your projector. General Projector Specifications Projector Lamp Specifications Remote Control Specifications Interactive Pe.
Contrast ratio 10000:1 with Auto Iris on and Normal Power Consumption mode Image size 60 inches (1.54 m) to 100 inches (2.54 m) (in native aspect ratio) Projection distance 13.
Lamp life Normal Power Consumption mode: Up to about 4000 hours ECO Power Consumption mode: Up to about 6000 hours Note: Turn off this product when not in use to prolong the life of the projector. Lamp life will vary depending upon mode selected, environmental conditions, and usage.
Parent topic: Technical Specifications Projector Dimension Specifications Height (excluding feet) 6.1 inches (155 mm) Width 14.4 inches (367 mm) Depth 14.8 inches (375 mm) Weight 12.3 lb (5.6 kg) Parent topic: Technical Specifications Projector Electrical Specifications Rated frequency 50/60 Hz Power supply 100 to 240 VAC ±10% 3.
Projector Environmental Specifications Temperature Operating: Up to 4921 feet (1500 m): 41 to 95 °F (5 to 35 °C) 4921 feet (1500 m) to 9843 feet (3000 m) : 41 to 86 °F (5 to 30 °C) Storage: 14 to .
Display format Refresh rate (in Hz) Resolution (in pixels) VGA 60/72/75/85 640 × 480 SVGA 56/60/72/75/85 800 × 600 XGA 60/70/75/85 1024 × 768 WXGA 60 1280 × 768 60 1366 × 768 60/75/85 1280 × 800.
Display format Refresh rate (in Hz) Resolution (in pixels) SDTV (480p) 60 720 × 480 SDTV (576p) 50 720 × 576 HDTV (720p) 50/60 1280 × 720 HDTV (1080i) 50/60 1920 × 1080 HDMI input signals VGA 60 6.
Display format Refresh rate (in Hz) Resolution (in pixels) HDTV (720p) 50/60 1280 × 720 HDTV (1080i) 50/60 1920 × 1080 HDTV (1080p) 24/30 1920 × 1080 * Wide resolution only Parent topic: Technical .
Parent topic: Technical Specifications Related references Projector Setup Settings - Extended Menu 307.
Notices Check these sections for important notices about your projector. Recycling Important Safety Information Important Safety Instructions FCC Compliance Statement Wireless Telegraphy Act Regulations Trademarks Open Source Software License Copyright Notice Recycling Epson offers a recycling program for end of life products.
Important Safety Instructions Follow these safety instructions when setting up and using the projector: • Do not look into the lens when the projector is on. The bright light can damage your eyes. Avoid standing in front of the projector so the bright light does not shine into your eyes.
• Never allow objects of any kind to enter any openings in the projector. Do not leave objects, especially flammable objects, near the projector. Never spill liquid of any kind into the projector.
• Do not store the projector outside of the required temperature range of 14 to 140 °F (–10 to 60 °C) or in direct sunlight for long periods of time. Doing so may cause damage to the case. • Do not place anything that can become warped or damaged by heat near the exhaust vents.
Parent topic: Notices Restriction of Use When this product is used for applications requiring high reliability/safety such as transportation devices related to aviation, rail, marine, automotive; disa.
For Canadian Users CAN ICES-3(B)/NMB-3(B) Parent topic: Notices Wireless Telegraphy Act Regulations The following acts are prohibited by the Wireless Telegraphy Act: • Modifying and disassembling (i.
We provide the source code of the GPL Programs until five (5) years after the discontinuation of same model of this projector product. If you desire to receive the source code of the GPL Programs, contact Epson as described in the User's Guide .
using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public License instead.) You can apply it to your programs, too.
1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate.
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange;.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License.
NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT H.
Also add information on how to contact you by electronic and paper mail. If the program is interactive, make it output a short notice like this when it starts in an interactive mode: Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type 'show w'.
SDL-Image cairo-1.10.2 podofo-0.91 wcecompat-1.2 The GNU Lesser General Public License Version 2 is as follows. You also can see the GNU Lesser General Public License Version 2 at http://www.gnu.org/licenses/. GNU LESSER GENERAL PUBLIC LICENSE Version 2.
recipients, so that they can relink them with the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights.
The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a "work based on the library" and a "work that uses the library". The former contains code derived from the library, whereas the latter must be combined with the library in order to run.
c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License. d) If a facility in the modified Library refers to a function or a table of da.
If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object code.
the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions.
9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License.
Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation.
Copyright (C) year, name of author This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version.
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
2. You can use this software for whatever you want. You don't have to pay us. 3. You may not pretend that you wrote this software. If you use it in a program, you must acknowledge somewhere in your documentation that you've used the IJG code.
It appears that the arithmetic coding option of the JPEG spec is covered by patents owned by IBM, ATT, and Mitsubishi. Hence arithmetic coding cannot legally be used without obtaining one or more licenses. For this reason, support for arithmetic coding has been removed from the free JPEG software.
libpng versions 1.0.7, July 1, 2000, through 1.2.5 - October 3, 2002, are Copyright (c) 2000-2002 Glenn Randers-Pehrson, and are distributed according to the same disclaimer and license as libpng-1.0.6 with the following individuals added to the list of Contributing Authors Simon-Pierre Cadieux Eric S.
Guy Eric Schalnat Paul Schmidt Tim Wegner The PNG Reference Library is supplied "AS IS". The Contributing Authors and Group 42, Inc. disclaim all warranties, expressed or implied, including, without limitation, the warranties of merchantability and of fitness for any purpose.
zlib-1.1.4 zlib-1.2.3 minzip 1.01e License terms of conditions of each program which are provided by owner of the copyright to the "zlib" are as follows. Copyright notice: (C) 1995-1998 Jean-loup Gailly and Mark Adler This software is provided 'as-is', without any express or implied warranty.
Google Web Toolkit GWT-Crypto 2.3.0 get-file-api GWT-Log DroidSansFallback License terms "Apache License Version 2.0, January 2004" are as follows. Apache License Version 2.0, January 2004 http://www.apache.org/licenses/ TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION 1.
shall not include works that remain separable from, or merely link (or bind by name) to the interfaces of, the Work and Derivative Works thereof. "Contribution" shall mean any work of author.
excluding those notices that do not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text file distributed as part of the Derivative Works; within .
Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any liability incurred by, or claims asserted against, such Contributor by reason of your accepting any such warranty or additional liability. END OF TERMS AND CONDITIONS APPENDIX: How to apply the Apache License to your work.
(1) Red Hat Incorporated Copyright (c) 1994-2007 Red Hat, Inc. All rights reserved. This copyrighted material is made available to anyone wishing to use, modify, copy, or redistribute it subject to the terms and conditions of the BSD License.
The author of this software is David M. Gay. Copyright (c) 1991 by ATT. Permission to use, copy, modify, and distribute this software for any purpose without fee is hereby granted, provided that this .
So that all may benefit from your experience, please report any problems or suggestions about this software to the 29K Technical Support Center at 800-29-29-AMD (800-292-9263) in the USA, or 0800- 89-1131 in the UK, or 0031-11-1129 in Japan, toll free.
Permission to use, copy, modify, and distribute this software is freely granted, provided that the above copyright notice, this notice and the following disclaimer are preserved with no changes.
So that all may benefit from your experience, please report any problems or suggestions about this software to the SuperH Support Center via e-mail at softwaresupport@superh.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Copyright (c) 1997-2002 FreeBSD Project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Copyright (C) 1991 DJ Delorie All rights reserved. Redistribution and use in source and binary forms is permitted provided that the above copyright notice and following paragraph are duplicated in all such forms. This file is distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Copyright (c) 1998, M. Warner Losh imp@freebsd.org All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. (33) - Daniel Eischen (targets using libc/posix) Copyright (c) 2001 Daniel Eischen deischen@FreeBSD.
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ARM LTD BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, .
* Copyright (c) 2009 MIPS Technologies, Inc. * * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * * * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. /* WPA Supplicant The copyright owner of the WPA Supplicant open source software provides terms and conditions (hereinafter referred to as "WPA Supplicant License").
With respect to a Licensee offering MPEG-4 Video Decoders and/or Encoders the following notice shall be given: THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONA.
pixman-0.21.6 jquery-1.7.2.min.js jquery.upload-1.0.2.min.js License terms of conditions of each program which are provided by owner of the copyright to the "MIT License" are as follows.
Copyright 2008 Andre Tupinambá Copyright 2008 Mozilla Corporation Copyright 2008 Frederic Plourde Copyright 2009 Oracle and/or its affiliates. All rights reserved.
The above copyright holder, limited to cases in which one satisfies conditions (1) ~ (4) below, or the conditions described in Version 2 of the GNU Public License officially announced by the Free Soft.
License terms of conditions of each program which are provided by owner of the copyright to the "TINET" are as follows. (1) FreeBSD Copyright (c) 1980, 1986, 1993 The Regents of the University of California.
The above copyright holder, limited to cases in which one satisfies conditions (1) ~ (4) below, or the conditions described in Version 2 of the GNU Public License officially announced by the Free Soft.
* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
The views and conclusions contained in the software and documentation are those of the authors and should not be interpreted as representing official policies, either expressed or implied, of Jonathan Wallace.
SSLeay license This projector product includes the open source software program "OpenSSL" which applies the terms and conditions provided by owner of the copyright to the "OpenSSL". List of OpenSSL programs OpenSSL 1.0.1e Copyright (c) 1995-1998 Eric Young (eay@cryptsoft.
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence, including the GNU Public Licence.
CPD-41026R2 Parent topic: Copyright Notice 366.
Een belangrijk punt na aankoop van elk apparaat Epson 1420Wi (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Epson 1420Wi heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Epson 1420Wi vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Epson 1420Wi leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Epson 1420Wi krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Epson 1420Wi bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Epson 1420Wi kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Epson 1420Wi . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
