Gebruiksaanwijzing /service van het product 2142-02 van de fabrikant Fujitsu
Ga naar pagina of 23
FUJITSU SEMICONDUCTOR CONTROLLER MANUAL F 2 MC FAMILY 10BASE-T LAN ADAPTER MB2142-02 USER’S MANUAL CM41-00412-1E.
PREFACE ■ Objectives and intended readership The MB2142-02 support tool (10BASE-T LAN adapter) is designed to enable the development and evaluation of products based on the F 2 MC* family.
1995 FUJITSU LIMITED Printed in Japan 1. The products described in this manual and the specifications thereof may be changed without prior notice. To obtain up-to-date information and/or specifications, contact your Fujitsu sales representative or Fujitsu authorized dealer.
READING THIS MANUAL ■ Page layout In this manual, an entire section is presented on a single page or spread whenever possible. The reader can thus view a section without having to flip pages. The contents of each section are summarized immediately below the title.
i CONTENTS CHAPTER 1 HANDLING AND SPECIFICATIONS OF THE PRODUCT ................................................. 1 1.1 Packing List ......................................................................................................................
ii FIGURES TABLES Figure 1.1 10BASE-T LAN adapter ............................................................................................................... 2 Figure 1.3 IF cable dimensions ........................................................
1 CHAPTER 1 HANDLING AND SPECIFICATIONS OF THE PRODUCT This chapter explains the handling and specifications of the 10BASE-T LAN adapter. Read this chapter and check the contents of the package before attempting to use the 10BASE-T LAN adapter. 1.1 Packing List 1.
2 1.1 Packing List Before first using the 10BASE-T LAN adapter, check that the package contains the following components: • 10BASE-T LAN adapter × 1 • IF cable × 1 ■ Appearance and names of parts Figure 1.1 illustrates the 10BASE-T LAN adapter.
3 The function of each part is described below: IF connector: Used to connet the IF cable. 10BASE-T LAN connector: Used to connect the twisted pair LAN cable.
4 1.2 10BASE-T LAN Adapter Specifications Table 1.2a lists the 10BASE-T LAN adapter specifications. Table 1.2b lists the LAN specifications. ■ 10BASE-T LAN adapter specifications Table 1.2a lists the 10BASE-T LAN adapter specifications. *1: Power is supplied from the main unit.
5 ■ LAN specifications Table 1.2b lists the LAN specifications. An RJ45 type LAN connector (8-conductor modular connector, 10BASE-T-compatible) is used. Note: To set the IP address, port address, or Ethernet local address, use the LAN address write program supplied with the emulator debugger.
6 1.3 IF Cable Specifications Table 1.3a lists the IF cable components, Table 1.3b lists the general specifications of the IF cable, and Figure 1.3 shows the dimensions of the IF cable. ■ IF cable specifications For an explanation of connecting the adapter to the main unit, see Section 2.
7 Figure 1.3 IF cable dimensions 300 ± 1 0mm Con ne ctor (FCN -23 7R 068- G/E ) Cov er (FCN- 230 C 068-C /E).
8 1.4 Notes on Use When using the 10BASE-T LAN adapter, keep the following points in mind: ■ Operating considerations When using the 10BASE-T LAN adapter, always keep the following points in mind: ❍ Turn off the power before connecting or removing a cable.
9 CHAPTER 2 CONNECTIONS This chapter describes how to connect, turn on, and turn off the 10BASE-T LAN adapter. Familiarize yourself with the contents of this chapter before attempting to turn on the adapter. 2.1 System Configuration 2.2 Connection to Main Unit 2.
10 2.1 System Configuration Connecting the 10BASE-T LAN adapter to a network that includes a host machine enables LAN-based communication with the host machine. ■ System configuration Connecting the 10BASE-T LAN adapter to a network that includes a host machine enables LAN- based communication with the host machine.
11 Memo.
12 2.2 Connection to Main Unit As shown in Figure 2.2, use an IF cable to connect the 10BASE-T LAN adapter to the main unit (sold separately). ■ Connection to main unit As shown in Figure 2.2, use an IF cable to connect the 10BASE-T LAN adapter to the main unit (sold separately).
13 ■ Notes When connecting the 10BASE-T LAN adapter to the main unit (sold separately), keep the following points in mind: ❍ Turn off the power before connecting or removing a cable. While the power is turned on, connecting or removing a cable may cause a malfunction.
14 2.3 Connection to Network As shown in Figure 2.3, connect the LAN conector to the network that includes the host machine. ■ Connection to network According to Figure 2.
15 ■ Notes When connecting the LAN connector to the network that includes the host machine, keep the following points in mind: ❍ Turn off the power before connecting or removing a cable. While the power is turned on, connecting or removing a cable may cause a malfunction.
16 2.4 Power-on Sequence Before turning on the power, ensure that all connections are complete. Then, turn on the power in the order of the host machine, the main unit, then the target (user system). ■ Power-on sequence Before turning on the power, ensure that all connections are complete.
17 2.5 Power-off Sequence Turn off the power in the order of the target (user system), the main unit, then the host machine. ■ Power-off sequence Turn off the power in the order of the target (user system), the main unit, then the host machine. To turn off the power, set the power switch on the rear panel of the main unit to “0.
Een belangrijk punt na aankoop van elk apparaat Fujitsu 2142-02 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Fujitsu 2142-02 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Fujitsu 2142-02 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Fujitsu 2142-02 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Fujitsu 2142-02 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Fujitsu 2142-02 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Fujitsu 2142-02 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Fujitsu 2142-02 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
