Gebruiksaanwijzing /service van het product S408 van de fabrikant Alvarez
Ga naar pagina of 19
1 S408 REPAIR MANUAL S408 REPAIR MANUAL.
2 These instructions are intended to help restore any ailing S408 Passive Loudspeaker back to factory working conditions. They show how to remove and replace the drivers. Please contact Mackie Technical Support (1-800-898-3211) to receive a Service Request Number and Order Number for parts needed for this restoration.
3 Top left woofer replacement: 1 1 Six screws need to be removed from each side of the front of the grill (twelve screws total) using the phillips head screwdriver. This grill has a tendency to want to “pop” off, so please be sure to hold it in place with one hand or arm while removing the screws with your free hand.
4 3 3 Carefully begin to remove the woofer. Caution: The woofer is approximately 8 pounds with the weight unevenly distributed. Top left woofer replacement continued: 4 4 The positive (blue and black) and negative (solid black) cables are still attached to the woofer terminals.
5 Top right woofer replacement: 2 2 Eight screws need to be removed from the woofer using the phillips head screwdriver. Once the screws are removed, the woofer may be loosened by prying a fl at head.
6 3 3 Carefully begin to remove the woofer. Caution: The woofer is approximately 8 pounds with the weight unevenly distributed. Top right woofer replacement continued: 4 4 The positive (blue and black) and negative (solid black) cables are still attached to the woofer terminals.
7 Bottom left woofer replacement: 2 2 Eight screws need to be removed from the woofer using the phillips head screwdriver. Once the screws are removed, the woofer may be loosened by prying a fl at he.
8 3 3 Carefully begin to remove the woofer. Caution: The woofer is approximately 8 pounds with the weight unevenly distributed. Bottom left woofer replacement continued: 4 4 The positive (blue and black) and negative (solid black) cables are still attached to the woofer terminals.
9 Bottom right woofer replacement: 2 2 Eight screws need to be removed from the woofer using the phillips head screwdriver. Once the screws are removed, the woofer may be loosened by prying a fl at h.
10 3 3 Carefully begin to remove the woofer. Caution: The woofer is approximately 8 pounds with the weight unevenly distributed. Bottom right woofer replacement continued: 4 4 The positive (blue and black) and negative (solid black) cables are still attached to the woofer terminals.
11 High Frequency Driver replacement: 8 8 1 1 2 2 3 3 4 4 5 5 6 6 7 7 9 9 10 10 11 11 12 12 2 2 Twelve screws and fl at washers need to be removed from the horn assembly using the phillips head screwdriver.
12 3 3 Carefully begin to remove the entire horn assembly (with the high frequency driver still attached). Caution: The horn weighs about 8 pounds, and the weight is unevenly distributed.
13 High Frequency Driver replacement continued: 6 6 Four bolts and eight washers may be removed from the driver using the 8mm combination wrench. Turn counter- clockwise to loosen and remove, clockwise to tighten. The other three are located around the horn assembly.
14 3 3 The horn assembly is shown above with the high frequency driver circled. Four screws need to be removed from the driver using the 3mm allen wrench. 4 4 Keep the four screws in a safe place. 5 5 The diaphragm and plate adapter are easily removed from the horn assembly.
15 7 7 This is what the plate adapter (left) and diaphragm (right) both look like. Place the new diaphragm (part # coming soon) where the old one was. Follow the same steps as above, but backwards 6 to 1. Power up the S408 and the new diaphragm should now be pumping out those highs again.
16 Input assembly replacement: 1 1 Eight screws need to be removed from the input assembly (located on the rear of the cabinet) using the phillips head screwdriver. Once the screws are removed, the input assembly may be loosened by prying a fl at head screwdriver in between it and the cabinet.
17 3 3 Two cables need to be removed from the input assembly PCB (as shown on the left and above): (1) the solid black cable attaches to the negative terminal (connection J4). This is for the input jack, and (2) the grey and black cable attaches to the positive terminal (connection J3).
18 Input assembly replacement continued: 4 4 Place the new input assembly (part #0012048) where the old one was. Follow the same steps as above, but backwards 3 to 1. Remove the serial number from the faulty input assembly (as shown in the picture above) and place on the new input assembly.
19 This page left blank intentionally.
Een belangrijk punt na aankoop van elk apparaat Alvarez S408 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Alvarez S408 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Alvarez S408 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Alvarez S408 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Alvarez S408 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Alvarez S408 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Alvarez S408 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Alvarez S408 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
