Gebruiksaanwijzing /service van het product TML-4000 van de fabrikant Genie
Ga naar pagina of 28
Operator’ s Manual with Maintenance Information Genie North America Phone 425.881.1800 Toll Free USA and Canada 800.536.1800 Fax 425.883.3475 Genie Australia Pty Ltd.
Genie TML-4000 and TML-4000N Part No. 97600 Operator's Manual Third Edition • Second Printing Copyright © 2000 by Genie Industries First Edition: Second Printing, March 2001 Second Edition: Fo.
Operator's Manual Third Edition • Second Printing Part No. 97600 Genie TML-4000 and TML-4000N 1 Safety Rules W arning Failure to obey the instructions and safety rules in this manual may result in death or serious injury .
2 Genie TML-4000 and TML-4000N Part No. 97600 Operator's Manual Third Edition • Second Printing Fall Hazards Do not stand on the machine. Do not climb on the mast.
Operator's Manual Third Edition • Second Printing Part No. 97600 Genie TML-4000 and TML-4000N 3 SAFETY RULES Keep away from the machine if it contacts energized power lines. Personnel must not touch or operate the machine until power lines are shut off.
4 Genie TML-4000 and TML-4000N Part No. 97600 Operator's Manual Third Edition • Second Printing SAFETY RULES T owing Hazards Read, understand and obey all of your tow vehicle manufacturer’s recommendations, warnings and instructions before towing this machine.
Operator's Manual Third Edition • Second Printing Part No. 97600 Genie TML-4000 and TML-4000N 5 Decal Legend Genie product decals use symbols, color coding and signal words to identify the following: Safety alert symbol—used to alert personnel to potential personal injury hazards.
6 Genie TML-4000 and TML-4000N Part No. 97600 Operator's Manual Third Edition • Second Printing 1 Outrigger leveling jack with footpad 2 Outrigger jack handle 3 Outrigger 4 Transport tie-down (.
Operator's Manual Third Edition • Second Printing Part No. 97600 Genie TML-4000 and TML-4000N 7 1 Key switch 2 Hour meter 3 Circuit breaker switches for lights (4) Control Panel 4 Glow plug indicator light 5 Oil pressure indicator light Controls 6 Water temperature indicator light 7 Air filter condition indicator light 00009.
8 Genie TML-4000 and TML-4000N Part No. 97600 Operator's Manual Third Edition • Second Printing Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator’s manual. 1 Avoid hazardous situations.
Operator's Manual Third Edition • Second Printing Part No. 97600 Genie TML-4000 and TML-4000N 9 Pre-operation Inspection o Be sure that the operator’s manual is complete, legible and in the storage container located on the machine. o Be sure that all decals are legible and in place.
10 Genie TML-4000 and TML-4000N Part No. 97600 Operator's Manual Third Edition • Second Printing Observe and Obey: Only routine maintenance items specified in this manual shall be performed by the operator.
Operator's Manual Third Edition • Second Printing Part No. 97600 Genie TML-4000 and TML-4000N 11 MAINTENANCE Check the Engine Coolant Level Maintaining the engine coolant at the proper level is essential to engine service life. Improper coolant level will affect the engine's cooling capability and damage engine components.
12 Genie TML-4000 and TML-4000N Part No. 97600 Operator's Manual Third Edition • Second Printing MAINTENANCE Scheduled Maintenance Maintenance performed quarterly, annually and every two years .
Operator's Manual Third Edition • Second Printing Part No. 97600 Genie TML-4000 and TML-4000N 13 Function T ests Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator's manual. 1 Avoid hazardous situations.
14 Genie TML-4000 and TML-4000N Part No. 97600 Operator's Manual Third Edition • Second Printing FUNCTION TESTS Setup 1 Position the machine at the desired work site. 2 Disconnect the trailer lights and safety chains. 3 Open the latch on the coupler.
Operator's Manual Third Edition • Second Printing Part No. 97600 Genie TML-4000 and TML-4000N 15 1 8 Press and hold the mast rotation lever. 1 9 Rotate the mast clockwise and then counterclockwise as far as it will go in either direction. Result: The mast should rotate smoothly and easily in both directions.
16 Genie TML-4000 and TML-4000N Part No. 97600 Operator's Manual Third Edition • Second Printing W orkplace Inspection Fundamentals The workplace inspection helps the operator determine if the workplace is suitable for safe machine operation. It should be performed by the operator prior to moving the machine to the workplace.
Operator's Manual Third Edition • Second Printing Part No. 97600 Genie TML-4000 and TML-4000N 17 Operating Instructions Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator's manual.
18 Genie TML-4000 and TML-4000N Part No. 97600 Operator's Manual Third Edition • Second Printing OPERATING INSTRUCTIONS T o Raise the Mast 1 Unlock the mast hold-down latch. 2 Turn the Raise/Lower winch handle clockwise until the mast reaches the full vertical position and the front spring latch locks the mast firmly in place.
Operator's Manual Third Edition • Second Printing Part No. 97600 Genie TML-4000 and TML-4000N 19 T owing 1 Make sure the mast hold-down latch is securely locked in place. 2 Make sure the covers are closed and secured. 3 Push to release the lock handle on each of the side outriggers and place in the stowed position.
20 Genie TML-4000 and TML-4000N Part No. 97600 Operator's Manual Third Edition • Second Printing T ransport and Lifting Instructions Observe and Obey: Common sense and planning must be applied to control the movement of the machine when lifting it with a crane or forklift.
Operator's Manual Third Edition • Second Printing Part No. 97600 Genie TML-4000 and TML-4000N 21 Observe and Obey: Only qualified riggers should rig and lift the machine. Be sure the crane capacity, loading surfaces and straps or lines are sufficient to withstand the machine weight.
22 Genie TML-4000 and TML-4000N Part No. 97600 Operator's Manual Third Edition • Second Printing Shading indicates decal is hidden from view, i.e. under covers Decal Inspection Use the pictures on the next page to verify that all decals are legible and in place.
Operator's Manual Third Edition • Second Printing Part No. 97600 Genie TML-4000 and TML-4000N 23 52475 28164 97602 28171 72828 72828 97661 97602 28161 28161 72874 82224 82237 82224 82224 97518 .
24 Genie TML-4000 and TML-4000N Part No. 97600 Operator's Manual Third Edition • Second Printing Specifications Continuous improvement of our products is a Genie policy. Product specifications are subject to change without notice or obligation.
Operator's Manual Third Edition • Second Printing Part No. 97600 Genie TML-4000 and TML-4000N 25 Reporting Safety Defects Genie Industries PO Box 97030 Redmond, WA 98073-9730 Reporting Safety D.
Operator’ s Manual with Maintenance Information Genie North America Phone 425.881.1800 Toll Free USA and Canada 800.536.1800 Fax 425.883.3475 Genie Australia Pty Ltd.
Een belangrijk punt na aankoop van elk apparaat Genie TML-4000 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Genie TML-4000 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Genie TML-4000 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Genie TML-4000 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Genie TML-4000 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Genie TML-4000 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Genie TML-4000 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Genie TML-4000 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
