Gebruiksaanwijzing /service van het product 200 van de fabrikant Grandstream Networks
Ga naar pagina of 54
1 User Manual BudgeTone - 200 Series IP Phone For Firmware Version 1.1.0.16 Grandstream Networks, Inc. www.grandstream.com.
2 Table of Contents 1 WELCOME………………………… …………………………………. 4 2 INSTALLATION………… …………………………………………… 5 2.1 W HAT IS I NCLUDED IN THE P ACKAGE …………………………………5 2.
3 6.2 U PGRADE THROUGH TFTP………………………………………….. 45 7 RESTORE FACTORY DEF AULT SETTING……………………47 APPENDIX I GLOSSARY OF TERMS……………………………….
4 1 Welcome Thank you for purchasing Grandstrea m BudgeTone-200 IP Phone. You made an excellent choice and we hope you will enjoy all its capabilities. Grandstream's BudgeTone-200 SIP IP phone is the innovative IP telephone that offers a rich set of functionality and superb sound quality.
5 2 Installation 2.1 What is Included in the P ackage The BudgeTone-200 phone package contains: 1. One BudgeTone -200 Main Case 2. One Handset 3. One Phone Cord 4.
6 The table below describes the c onnectors on the BudgeTone-200 phone: LAN 10/100 Switch LAN port for connecting to Ethernet. PC 10/100 Switch port for connecting PC POWER 5V power port HEADSET 2.5mm Headset port 2.3 Safety Compliances The BudgeTone-200 phone is compliant with various safety standards including FCC/CE.
7 Warning: Please do not attempt to use a different power adaptor. Using other power adaptor may damage the BudgeTone-200 and will void the manufacturer warranty.
8 3 Product Overview The following photo illustrates the ap pearance of a BudgeTone-200 IP phone. Front View Side View.
9 3.1 Key Features Grandstream BudgeTone-200 IP Phone is a next generation IP telephone based on industry open standard SIP (Session Initiati on Protocol). Built on innovative technology, Grandstream IP Phone features market leading superb sound quality and rich functionalities at mass-affordable price.
10 • allow user to specify different URL for configuration file and firmware files Hardware Features: • Support Headset which will auto switc h to Headset when plu gged in • Support 10/100 Full/Half Duplex Ethernet Switch with LAN and PC port, Ethernet polarity can be auto detected, thus either straight through or twist cable can be used.
11 3.2 Hardware Specification The table below describes the hardware specification of BudgeTone-200: Model BudgeTone-200 LAN interface 2xRJ45 10/100Base-T Headset Jack 2.
12 4 Using BudgeTone-200 IP Phone 4.1 Getting Famili ar with LCD / LED BudgeTone-200 phone has a numeric LCD of 64mmx24mm size with backlight. This model has a small red LED status reminder. Here is the display w hen all segments illuminate: PM 下午 010 A M 上午 When the phone is in the normal idle state, th e backlight is off.
13 Handset and Speakerphone/ Headset Volume Icons: 0-7 scales to adjust handset / speakerphone volume Real-time Clock: Synchronized to Internet time server Time zone configurable via web browser Call .
14 4.2 Getting Familiar with Keyp ad Called Numbers Menu Button LCD Red LED Message Hold Mute/Delete Send/Dial Speakerphone Flash Conference Transfer Up/Down Keys Callers.
15 Key Button Key Button Definitions 0 - 9, *, # Digit, star and pound keys are usually used to make phone calls ↓ 1) Reduce handset, speakerphone/headset volume after off hook the phone via handset.
16 SEND/(RE)DIAL Dial a new number inputted or Redial the number last dialed. After entering the phone number, pressing this key would force a call to go out immediately before timeout SPEAKERPHONE Enter hands-free mode 4.3 Making and Answering Phone Calls 4.
17 • To dial another extension on the same proxy, such as 1008, simply pick up handset or press speakerphone, dial 1008 and then press the “SEND” button. • To dial a PSTN number such as 6266667890, you might need to enter in some prefix number followed by the phone num ber.
18 To make a direct IP to IP call, first off hook, then press “MENU” key, then enter a 12- digit target IP address to make the call. If port is not default 5060, destination ports can be specified by using “*4” (encoding for “:”) followed by the port number.
19 4.3.7.1 Blind Transfer User can transfer an active call to a third party without announcement. User presses the “TRANSFER” button and if the other voice channel is available (i.e., there is no other activ e conversation besides the cu rre nt one), user will hear a dial tone.
20 Assuming that call party A and B are in convers ation. A wants to bring C in a conference: 1. A presses the “CONFERENCE” button to get a dial tone and put B on hold 2. A dials C’s number then “SEND” key to make the call 3. If C answers the call, then A presses “CONFERENCE” button to bring B, C in the conference.
21 Key Call Features *30 Block Caller ID (for all subsequent calls) *31 Send Caller ID (for all subsequent calls) *67 Block Caller ID (per call) *82 Send Caller ID (per call) *70 Disable Call W aiting. (Per Call) *71 Enable Call Waiting (Per Call) *72 Uncondition al Call Forward To use this feature, dial “*72” and get the dial tone.
22 5 Configuration Guide 5.1 Configuration with Keypad When the phone is IDLE or On Hook, press the MENU button to enter key pad menu state. When the phone goes off-hook or a call com es in, the phone automatically exits the key pad menu state and prepare for th e call.
23 Menu Item Menu Functions 5 Display “ [5] dnS ” Press MENU to display the DNS address Enter new DNS address if DHCP is OFF Press ‘ ↓ ’ or ’ ↑ ’ to exit Press MENU to (save and) exit .
24 Menu Item Menu Functions 10 Display “[ 10] Phy Addr ” Press MENU to display the physical / MAC address Press ‘ ↓ ’ or ’ ↑ ’ to exit 11 Display “[11] ring 0 ” Press MENU to hear the select ed ring tone, press ‘ ↓ ’ or ’ ↑ ’ to select the stored ring tones.
25 5.2 Configuration wi th Web Browser BudgeTone 200 series IP phone has an embedde d Web server that will respond to HTTP GET/POST requests. It also has embedded HT ML pages that allow a user to configure the IP phone through a Web browse r such as Microsoft’s IE.
26 The password is case sensitive with m aximum length of 25 characters and the f actory default password for End User is “123”. After a correct password is entered in the lo gin screen, the embedded Web server inside the BudgeTone 200 will respond with the Conf iguration page which is explained in details below.
27 Savings Time: normal time) Date Display Format: Year-Month-Day Month-Day-Year Day-Month-Year System Device Mode Device Mode: Switch (default) NAT/Router NAT/Router Configuration WAN side http acces.
28 U pdate All Rights Reserved Grands tream Networks, Inc. 2004, 2005 End User Password This contains the password to access the Web Configuration Menu.
29 Cloned WAN MAC Addr Allow the user to set a specific MAC address. Set in Hex format. LAN Subnet Mask Sets the LAN subnet mask. Default value is 255.255.255.0 LAN DHCP Base IP Base IP for the LAN port, which function as a Gateway for the subnet. Default value is 192.
30 MAC Address The device ID, in HEX format. This is a very important ID for ISP troubleshooting. IP Address This field shows LAN IP address of BudgeTone 200 Product Model This field contains the product model info. Software Version • Program: This is the main software r elease, its number is always used for firmware upgrade.
31 Advanced User configuration includes not only the end us er configuration, but also advanced configuration such as SIP conf iguration, Codec select ion, NAT Traversal Setting and other miscellaneous configuration.
32 Allow DHCP Option 66 to override server: No Yes Automatic Upgrade: No Yes, check for upgrade every 1008 0 minutes (default 7 days) Always Check for New Firmware Check New Firmware only when F/W pre.
33 Admin Password Administrator password. Only admini strator can configure the “Advanced Settings” page. Password fiel d is purposely left blank for security reason after clicking update and saved. The maximum password length is 25 characters. Silence Suppression This controls the silence suppression /VAD feature of G723 and G729.
34 Local RTP port This parameter defines the local RTP-RTCP port pair the BudgeTone 200 will listen and transmit. It is th e ba se RTP port for channel 0. When configured, channel 0 will use this po rt _value for RTP and the port_value+1 for its RTCP; channel 1 will use port _value+2 for RTP and port_value+3 for its RTCP.
35 Automatic Upgrade Choose Yes to enable automatic upgrade and provisioning. In “Check for new firmware every” field, enter the number of days to enable BudgeTone 200 to check the server for firmware upgrade or configuration in the defined period of days.
36 Allow DHCP Option 42 to override NTP server DHCP Option 42 specifies a list of IP addresses for Network Time Protocol (NTP) servers available to the client. If you choose yes, BT200 will use the NTP servers resolved from DHCP, inst ead of the one you specified in the "NTP Server" option above.
37 Following is the screenshot of the Account Configuration Page:- Grandstream Device Configuration STATUS BASIC SETTINGS ADVANCED SETTINGS ACCOUNT Account Active: No Yes Account Name: M y C om pany (e.g., MyCompany) SIP Server: s ip.m y c om pany .c om (e.
38 mail system) Send DTMF: in-audio via RTP (RFC2833) via SIP INFO Early Dial: No Yes (use "Yes" only if proxy supports 484 response) Dial Plan Prefix: (this prefix string is added to each d.
39 Turn off speaker on remote disconnect: No Yes Preferred Vocoder: (in listed order) choice 1: PC MU choice 2: PC MA choice 3: G .729A /B choice 4: G .723.1 choice 5: GSM choice 6: PCM U choice 7: PCM A choice 8: G .729A /B Special Feature: Standar d U pdate All Rights Reserved Grands tream Networks, Inc.
40 Use DNS SRV: Default is No. If set to Yes the clien t will use DNS SRV to look up server. User ID is Phone Number If the BudgeTone 200 has an assi gned PSTN telephone number, this field should be set to “Yes”.
41 Proxy-Require SIP Extension to notify SIP serv er that the unit is behind the NAT/Firewall. Voice Mail User ID When configured, user will be able to dial voice mail server by pressing “MSG” button. Send DTMF This parameter specifies the mechanism to transmit DTMF digit.
42 UAS Specify Refresher As a Callee, select UAC to use caller or proxy server as the refresher, or UAS to use the phone as the refresher. Force INVITE Session Timer can be refreshed using INVITE method or UPDATE method. Select “Yes” to use INVI TE method to refresh the session timer.
43 5.2.4 Saving the Configuration Changes Once a change is made, the user should pre ss the “Update” button in the Configuration Menu. The IP phone will then display the follow ing screen to confi.
44 5.3 Configuratio n through C entral Pr ovisioning Server Grandstream BudgeTone 200 can be automa tically configured from a central provisioning system. When BudgeTone 200 boots up, it will send TF TP or HTTP request to download configuration files, there are two configura tion files, one is “cfg.
45 6 Firmware Upgrade 6.1 Upgrade through HTTP To upgrade software, BudgeTone 200 can be c onfigured with an HTTP server where the new code image file is loca ted. For ex ample, following URL in the HTTP Upgrade Server: http://firmware.mycom pany.c om:6688/Grandstream/1.
46 retrieve the new image files by downloadi ng them into the BudgeTone 200’s SRAM. During this stage, the BudgeTone 200’s LED s will blink until the checking/downloading process is completed. Upon verification of ch ecksum, the new code im age will then be saved into the Flash.
47 7 Restore Factory Default Setting Warning !!! Restore the Factory Default Setting will DELE TE all config uration information of the device. Please backup or print out all th e settings before you approach to following steps.
48 8 Appendix I Glossary of Terms ADSL Asymmetric Digital Subscriber Line: Mo dem s attached to twisted pair copper wiring that transmit from 1.5 Mbps to 9 Mbps downstream (to the subscriber) and from 16 kbps to 800 kbps upstream, depending on line distance.
49 European digital mobile telephony. DE CT covers wireless PBXs, telepoint, residential cordless telephones, wireless access to the public switched telephone network, Closed User Groups (CUGs), Lo cal Area Networks, and wireless local loop.
50 A FQDN consists of a host and domain name, including top-level domain. For example, www.grandstream.com is a fully qualified domain name. www is the host, grandstream is the second-level doma in, and.
51 There are two types of echo of relevance in telephony: acoustic echo and hybrid echo. Speech compression techniques a nd digital processing delay often contribute to echo generati on in telephone networks. H.323 A suite of standards for multimedia conf erences on traditional packet-s witched networks.
52 NAT Network Address Translation NTP Network Time Protocol , a protocol to exchange and synchronize time over networks The port used is UDP 123 Grandstream products using NTP to get time from Internet OBP/SBC Outbound Proxy or another name Session Bord er Controller.
53 Real-time Transport Protocol defines a standardized packet format for delivering audio and video over the Inte rnet. It was developed by the Audio-Video Transport Working Group of the IETF and first published in 1996 as RFC 1889 SDP Session Description Protoc ol, is a format for describing streaming media initialization parameters.
54 Voice Activity Detection or Voice Activity D etector is an algorithm used in speech processing wherein, the presence or ab sence of hum an speech is detected from the audio samples. VLAN A virtual LAN, known as a VLAN, is a logically-independent network.
Een belangrijk punt na aankoop van elk apparaat Grandstream Networks 200 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Grandstream Networks 200 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Grandstream Networks 200 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Grandstream Networks 200 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Grandstream Networks 200 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Grandstream Networks 200 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Grandstream Networks 200 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Grandstream Networks 200 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
