Gebruiksaanwijzing /service van het product AD1646 van de fabrikant American Dynamics
Ga naar pagina of 44
Model 1646 V ariable Speed Receiver Installation Instructions Receivers are designed as the remote control device for operation of a motorized pan/tilt unit and a motorized lens unit. Since camera sites are often a great distance from the operator’s viewing location, these Receivers provide the operator with positive control of the camera site.
The software/firmware furnished with this equipment is confidential to and is copyrighted by AMERICAN DYNAMICS. It is not to be copied or disclosed in any manner without the express written consent of AMERICAN DYNAMICS.
The installation of this product should be made by qualified service personnel and should conform to all local codes. QA302C Warning: This product generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions manual, may cause interference to radio communications.
.
T able of Contents Product Description ...............................................................................1 Features ................................................................................................ 2 Pan/T ilt and Lens Control .
.
PRODUCT DESCRIPTION The 1646 Receiver is a single channel Receiver for control of motorized pan/tilt and lens units used with Matrix Switching Systems. The 1646 is used to control a 12VDC pan/ tilt and a motorized lens (zoom, focus, and iris) of a single camera, and to control auxiliary functions at a camera site.
FEATURES Pan/Tilt and Lens Control The 1646 Receiver provides drive outputs to control camera Pan/Tilt and Lens motors. The J6 connector, located on the side of the unit, contains all the connections required for the control of the Pan/Tilt and Lens units.
INSTALLATION Preparation Several user configuration switches must be set (see SETUP instructions, page 4). If the unit is not configured correctly, damage to the unit, and any other device connected to it, may result. Check all wiring and cabling before applying power.
Receiver Configuration Setup The 1646 Series Receiver must be configured for preset capabilities, control code, auxiliaries, and autopan timer/timeout. An internal DIP switch located on the main PCB, labeled "OPTIONS" ( S3 ), is provided for these settings.
The following information provides the user with default setting information for the 1646M and 1646S models. DIP Switch 3 Default Settings 1646M Models Switch 1 - OFF Switch 2 - ON Switch 3 - ON, Baud.
6 SETUP Camera Switch Number 1 234567891 0 1 0 000000000 2 1 000000000 3 0 100000000 4 1 100000000 5 0 010000000 6 1 010000000 7 0 110000000 8 1 110000000 9 0 001000000 1 0 1 001000000 1 1 0 101000000.
1646S Series (RS-232 Code) To receive control code via the RS-232 line, first locate the RS-232 board (it is the top board). Set the following eight positions of the S1 and S2 DIP switches on the RS-232 board. (Figure 3 below shows the location of S1 and S2 on the RS-232 board).
SETUP 8 Figure 4 - 1646M Connector and Switch Locations Figure 5 - 1646S Connector and Switch Locations AUX2 NC AUX1 COMM AUX1 NO TILT SHIELD ZOOM FOCUS - REF PAN2 PAN1 + REF AUX1 NC AUX2 NO AUX2 COMM Nema Box Fuse Fuse FOCUS ZOOM GND TILT NO CONN PAN ALARM 2 GND GND IRIS CODE ALARM 1 NO CONN OPTIONS CAMERA I.
CONNECTIONS To connect the 1646M or 1646S Receivers to external devices, refer to the following text and to the typical connections illustrated in the Appendix. Code Line Connections for Control Code (model 1646M) 1646M Receivers connect directly to other control code devices.
CONNECTIONS 10 U10 U21 S5 J6 Q1 Q4 Q2 Q5 R111 R109 U8 U14 U22 U1 U6 U13 U5 U20 U7 U12 J4 J5 U11 U19 U18 S4 S1 S2 J10 S3 R6 R31 J7 R3 Figure 9 - 1646M Receiver Module PCB Figure 8 - Main PCB (bottom bo.
Code Line Connections for RS-232 (1646S Series) 1646S Receivers typically connect to other RS-232 devices via a wall-mount, 8-pin Terminal Box, HP0047. Matrix Switching Systems, 1983 modems, RS-232 keyboards, and other user-supplied RS-232 compatible devices, are connected via a JJ0007 modular cable to the Terminal Box.
Pan/Tilt and Lens Cable The connection to a Pan/Tilt and a motorized Lens is with a 12-pin connector. This connector (J6) is located on the side of the unit (see Figure 5, page 8).
Auxiliary and Pre-position Cable The connection of auxiliary equipment and pre-position servos is with a 14-pin connector. This connector (J7) is located on the side of the unit (see Figure 5, page 8).
Power Input CAUTION - The following instructions for power input require the installer to gain access to internal terminals and power wiring which involve hazardous voltages and the risk of electric shock. Power wiring must be done only by qualified electricians or service personnel and should conform to local codes.
Power Up Auto Sense On initial power up, the 1646 performs an automatic determination of the reference voltage sense for the pan/tilt and lens connections for preset capability. When power is first connected, the 1646 commands the camera to pan, tilt, change iris, zoom, and focus to determine the polarity of the reference voltage connections.
.
TYPICAL SYSTEM CONNECTIONS 1646M to 2150 (Control Code Connection) NOTE: MAX. DISTANCE BETWEEN 1646 and 2150 is 5000', using two conductor, shielded cable, Belden 8760 orequivalent.
NOTE: MAX. DISTANCE between 1646 and 2091 is 5000'. Use two-conductor, shield 876 0 TYPIC.
TYPICAL SYSTEM CONNECTIONS 1646S to 1983 (RS-232 Connection) HP0047 TERMINAL BOX 1983 PSK 120V 60Hz LINE RS232 PHONE 3 2 1 12 11 10 CODE I/O JJ0007 1 2 3 4 5 6 7 8 Nema-4 Box 1646S NOTE: Maximum distance between 1646S and terminal box is 1000' (330m) using 18 AWG shielded cable.
CODE 1 POWER SELECT DATA LINE IN OUT IN OUT 1 2 CODE 2 123 4567 8 A B C D E F 123 4567 8 A B C D E F 123 4567 8 A B C D E F 123 4567 8 A B C D E F C O M TYPICAL SYSTEM CONNECTIONS 1996 to 2091 to 1646.
Camera Switch Position Number 1 2 3 4 5 6 7 8 9 10 6 5 0 0 000 0 6 6 1 0 000 0 6 7 0 1 000 0 6 8 1 1 000 0 6 9 0 0 100 0 7 0 1 0 100 0 7 1 0 1 100 0 7 2 1 1 100 0 7 3 0 0 010 0 7 4 1 0 010 0 7 5 0 1 0.
Camera Switch Position Number 1 2 3 4 5 6 7 8 9 10 129 0 0 0 0 0 0 130 1 0 0 0 0 0 131 0 1 0 0 0 0 132 1 1 0 0 0 0 133 0 0 1 0 0 0 134 1 0 1 0 0 0 135 0 1 1 0 0 0 136 1 1 1 0 0 0 137 0 0 0 1 0 0 138 1.
Camera Switch Position Number 1 2 3 4 5 6 7 8 9 10 193 0 0 0 0 0 0 194 1 0 0 0 0 0 195 0 1 0 0 0 0 196 1 1 0 0 0 0 197 0 0 1 0 0 0 198 1 0 1 0 0 0 199 0 1 1 0 0 0 200 1 1 1 0 0 0 201 0 0 0 1 0 0 202 1.
Camera Switch Position Number 1 2 3 4 5 6 7 8 9 10 257 0 0 0 0 0 0 258 1 0 0 0 0 0 259 0 1 0 0 0 0 260 1 1 0 0 0 0 261 0 0 1 0 0 0 262 1 0 1 0 0 0 263 0 1 1 0 0 0 264 1 1 1 0 0 0 265 0 0 0 1 0 0 266 1.
Camera Switch Position Number 1 2 3 4 5 6 7 8 9 10 321 0 0 0 0 0 0 322 1 0 0 0 0 0 323 0 1 0 0 0 0 324 1 1 0 0 0 0 325 0 0 1 0 0 0 326 1 0 1 0 0 0 327 0 1 1 0 0 0 328 1 1 1 0 0 0 329 0 0 0 1 0 0 330 1.
Camera Switch Position Number 1 2 3 4 5 6 7 8 9 10 385 0 0 0 0 0 0 386 1 0 0 0 0 0 387 0 1 0 0 0 0 388 1 1 0 0 0 0 389 0 0 1 0 0 0 390 1 0 1 0 0 0 391 0 1 1 0 0 0 392 1 1 1 0 0 0 393 0 0 0 1 0 0 394 1.
Camera Switch Position Number 1 2 3 4 5 6 7891 0 449 0 0 0 0 0 0 450 1 0 0 0 0 0 451 0 1 0 0 0 0 452 1 1 0 0 0 0 453 0 0 1 0 0 0 454 1 0 1 0 0 0 455 0 1 1 0 0 0 456 1 1 1 0 0 0 457 0 0 0 1 0 0 458 1 0.
Camera Switch Position Number 1 2 3 4 5 6 7 8 9 10 513 0 0 0 0 0 0 514 1 0 0 0 0 0 515 0 1 0 0 0 0 516 1 1 0 0 0 0 517 0 0 1 0 0 0 518 1 0 1 0 0 0 519 0 1 1 0 0 0 520 1 1 1 0 0 0 521 0 0 0 1 0 0 522 1.
Camera Switch Position Number 1 2 3 4 5 6 7 8 9 10 577 0 0 0 0 0 0 578 1 0 0 0 0 0 579 0 1 0 0 0 0 580 1 1 0 0 0 0 581 0 0 1 0 0 0 582 1 0 1 0 0 0 583 0 1 1 0 0 0 584 1 1 1 0 0 0 585 0 0 0 1 0 0 586 1.
Camera Switch Position Number 1 2 3 4 5 6 7 8 9 10 641 0 0 0 0 0 0 642 1 0 0 0 0 0 643 0 1 0 0 0 0 644 1 1 0 0 0 0 645 0 0 1 0 0 0 646 1 0 1 0 0 0 647 0 1 1 0 0 0 648 1 1 1 0 0 0 649 0 0 0 1 0 0 650 1.
Camera Switch Position Number 1 2 3 4 5 6 7 8 9 10 705 0 0 0 0 0 0 706 1 0 0 0 0 0 707 0 1 0 0 0 0 708 1 1 0 0 0 0 709 0 0 1 0 0 0 710 1 0 1 0 0 0 711 0 1 1 0 0 0 712 1 1 1 0 0 0 713 0 0 0 1 0 0 714 1.
Camera Switch Position Number 1 2 3 4 5 6 7 8 9 10 769 0 0 0 0 0 0 770 1 0 0 0 0 0 771 0 1 0 0 0 0 772 1 1 0 0 0 0 773 0 0 1 0 0 0 774 1 0 1 0 0 0 775 0 1 1 0 0 0 776 1 1 1 0 0 0 777 0 0 0 1 0 0 778 1.
Camera Switch Position Number 1 2 3 4 5 6 7 8 9 10 833 0 0 0 0 0 0 834 1 0 0 0 0 0 835 0 1 0 0 0 0 836 1 1 0 0 0 0 837 0 0 1 0 0 0 838 1 0 1 0 0 0 839 0 1 1 0 0 0 840 1 1 1 0 0 0 841 0 0 0 1 0 0 842 1.
Camera Switch Position Number 1 2 3 4 5 6 7 8 9 10 897 0 0 0 0 0 0 898 1 0 0 0 0 0 899 0 1 0 0 0 0 900 1 1 0 0 0 0 901 0 0 1 0 0 0 902 1 0 1 0 0 0 903 0 1 1 0 0 0 904 1 1 1 0 0 0 905 0 0 0 1 0 0 906 1.
Camera Switch Position Number 1 2 3 4 5 6 7 8 9 10 961 0 0 0 0 0 0 962 1 0 0 0 0 0 963 0 1 0 0 0 0 964 1 1 0 0 0 0 965 0 0 1 0 0 0 966 1 0 1 0 0 0 967 0 1 1 0 0 0 968 1 1 1 0 0 0 969 0 0 0 1 0 0 970 1.
.
.
An American Dynamics Product Designed and built by Sensormatic CCTV Systems Division One Blue Hill Plaza Pearl River, New York, 10965 (914) 624-7600 Technical Support Center: 1-800-442-2225 FAX: 914-6.
Een belangrijk punt na aankoop van elk apparaat American Dynamics AD1646 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen American Dynamics AD1646 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens American Dynamics AD1646 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding American Dynamics AD1646 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over American Dynamics AD1646 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van American Dynamics AD1646 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de American Dynamics AD1646 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met American Dynamics AD1646 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
