Gebruiksaanwijzing /service van het product GbE2 van de fabrikant HP (Hewlett-Packard)
Ga naar pagina of 22
ProLiant BL p-Cl ass GbE2 Interconnect Swit ch Overview white paper Abstract .............................................................................................................................................. 3 Introduction ................
Enterprise-class perf ormance ................................................................................................... ............ 16 Network adapter team ing ................................................................................
3 Abstract This white paper provides an overview of the second generation Gigabit Ethernet (GbE2) Interconnect Kit options for the ProLiant BL p-Class system.
4 GbE2 Interconnect Kit The GbE2 Interconnect Kit contains two redundant, hot-swappable GbE2 Interconnect Switches and two 4-port LAN interconnect modules.
5 redundant fans and they are powered by two independent feeds via the redundant, N+N hot-plug ProLiant BL p-Class power enclosure. Users can independently disable or enable the switch ports as desired. Auto-MDI/MDIX with auto- negotiation of speed and duplex mode is supported.
6 LAN in tercon nec t mod ule u plin k po rts The LAN int erconnect module uplink ports are typically us ed to connect the inte rconnect switches to the network infrastructure; however, they are standard Ethernet switch ports and may be used as desired.
7 module that contain a 10-Gb Ethernet high-bandwidth uplink. The 10-Gb LAN interconnect modules may also contain Gigabit Ethernet ports, if space permit s.
8 Applications that utilize a single uplink port include testing and ev aluation systems, server blade enclosures with a few installed servers, and applications that require minimal band width. On a heavily utilized system, using a single uplink port for all 32 network adapters can cause a traffic bottleneck.
9 Fibre Chann el pass-through The GbE2 Interconnect Kits offer the ability to pass-through BL20p G2 Fibre Channel signals using the optional GbE2 Storage Connectivity Kit. Therefore, both Ethernet LAN signal consolidation and Fibre Channel SAN signal pass-through is now possible with a single interconnect.
10 Figure 5. BL20p G2 Fibre Channel signal routing with the GbE2 Interconnect Swit c h With the GbE2 Storage Connectivity Kit installed, both Fibre Channel SAN and Ethernet LAN signals exit the rear of the server blade enclosure, each type of signal on its dedicated interconnect module (Figure 6).
11 Switch management The GbE2 Interconnect Switch is an industry-standard managed Ethernet switch, which means that users configure and manage the switch like other industry-standard Ethernet switches.
12 configuration file. The confi guration file has a text-based format, which allows it to be directly viewed, printed, and edited. E ach GbE2 Inte rconnect Switch has thre e configuration s ettings in memory (active, back-up, and fac to ry); any one o f these settings can be selected as the cu r rent runtime version .
13 Script able co mman d line int erface The CLI provides the added benefits of scripting, a set-up utility and other enhanced switch management tas ks, an out-of-band connection, and more.
14 • Specify the IP-based management networks that are allowed to access each switch. • Set a user interface idle time-out period and disable web-based and Telnet access. • Enable a secure shell (SSH) session to the C LI interfac e. • Modify default Telnet and HTTP server socket port numbers.
15 The optional HP Diagnostic Station (Figure 11) is available to configure and diagnose an interconnect switch or a server blade that has been removed from the server blade enclosure.
16 • The ability to set the interconnect switch to a v alid firmware image in case of firmware corruption. For more detailed information on the administration ca pabilities of the ProLiant BL p-Class GbE2 Interconnect Sw itch, see the ProLiant BL p- Class GbE2 Interconnect Switch user g uides.
17 • Network Fault Tolerance (NFT) • Transmit Load Balancing (TLB) • Switch-assisted Load Balanc ing (SLB) When teaming HP NC series network adapters with the interconnect switch, NFT and TLB teaming are the same as with any ProLiant system.
18 Appendix: S ummary of features of th e ProLiant BL p -Class GbE2 Interconnect Kit Switc h perfor mance • Store an d for ward mode l ayer 2 s witchin g stand ard • Layer 3 routi ng firmw are fut.
19 • MAC ad dress u ser m anagem ent s ortin g on a per p ort an d per VL AN basis • Manual, or automatic IP s ettings via a BOO TP server • Three switch c onfigurat ion settings in mem ory ( active, b ack-up , and f actory ); any can b e selected as the curr ent versi on.
20 • State infor mation ”dump ” for tuning and debugg ing swit ch per form ance availa ble in u uenc oded f ormat • Panic c omman d for immed iate st ate du mp t o flash memor y an d auto mati.
21 Switc h ports per server blade enclo sure • Eight external 10/100/1000T (C-GbE 2) or 1000SX (F-GbE2) Gigabit E t hernet ports on a hot-pluggable rear-mounted interco nne ct module • Four extern.
For more i nform ation For additional information, r efer to the resources detailed below. Resourc e d escription Web addr es s ProLian t BL p-Clas s GbE2 Interconn ect sw itch h om e pa ge http://h18004.www1.hp.com/products/se rvers/proliant-bl/p- class/bl-p- interconnect-switch2.
Een belangrijk punt na aankoop van elk apparaat HP (Hewlett-Packard) GbE2 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen HP (Hewlett-Packard) GbE2 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens HP (Hewlett-Packard) GbE2 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding HP (Hewlett-Packard) GbE2 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over HP (Hewlett-Packard) GbE2 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van HP (Hewlett-Packard) GbE2 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de HP (Hewlett-Packard) GbE2 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met HP (Hewlett-Packard) GbE2 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
