Gebruiksaanwijzing /service van het product LC 2000 van de fabrikant HP (Hewlett-Packard)
Ga naar pagina of 194
HP NetServer LC 2000/2000r Installation Guide HP Part Number D8514-90000 Printed Novem ber 1999.
ii Notice The inf ormation c ontaine d in this docum ent is su bject to change without notice . Hewlett-Packard makes no warranty of any kind with regard to this m aterial, includ ing, but not lim ited to, the i mp lied warrantie s of merchantability a nd fitness for a parti cul ar pu rpos e .
iii Cont en ts 1 Setti ng Up the HP NetServer ....................................................................... 1 Ins ta llat ion Gu id e line s.................................................................................... 1 Pedestal I nstal l ati on .
Contents iv Hot Swap Confi gurat i on Options .............................................................. 3 8 Ca bling Co nfig urat ions ............................................................................ 43 Ins talling Hot Sw ap Ha rd D rives .
Contents v Attac h ing the Fro n t B e ze l ........................................................................ 94 Conti nui ng wit h the Rack Install ati on Proc ess .............................................. 95 9 C onnec ting t he M onit or, K ey board , Mous e , and U PS .
Contents vi Over vi ew ....................................................................................................1 27 Us ing In format ion As s i stan t ........................................................................127 Gett ing He lp .
Contents vii Envi ronm ent al Requi rem ents ......................................................................16 3 Physic al Requir em ent s ...............................................................................16 4 Vi deo S uppor t ....
.
1 1 Setting Up the HP NetSer v er Install ation Guidelines This I n stallatio n Guide is f or the H P NetSe r ver LC 2000 pede sta l mode l , and the H P NetSe rver LC 2000 r rack-opti mi zed mo del. L C 2000r (Rack-mounted Model ) LC 2000 (Pedestal M o del) Fi g u r e 1- 1.
Chapter 1 Setting Up th e HP NetServer 2 Us e t h e r em ova bl e a n d r e us a bl e r a ck -m ou n ti n g h an d l es t o m ove a n d p la c e th e LC 2 00 0r in th e ra ck . Rem o ve t h e han dl es on l y w h en yo u h a ve secu r ed th e HP Net S er ver t o th e r a ck sli d es .
Chapter 1 Setting Up th e HP NetServer 3 CAUTI ON Th e H P Ne t Server LC 2 000 we ighs app r oximately 80 lbs. (36 kg), w h i ch m a y be mo r e than o n e pe r son should lift.
Chapter 1 Setting Up th e HP NetServer 4 11 . Conn ect al l ot h er ext er n al ca bl es t o th e r ear of th e HP Net Ser ver . 12. Ob tain t he rele ase his tory of th e HP Net Serv er Nav igat or CD-ROM pro v ided w ith t h e H P Ne tSe rve r to e nsu r e y ou hav e the late st N avig ato r CD-R OM.
Chapter 1 Setting Up th e HP NetServer 5 Rack M ount Install at ion Foll o w t h e set u p st ep s in th e ex a ct or d er sh own bel o w for a su ccess ful r a ck insta llat ion. Ski p any step s that do no t ap p ly to y o ur ins tal latio n . Show n Rem oved fo r De ta il Figure 1-3.
Chapter 1 Setting Up th e HP NetServer 6 3. If you h a ve opt i on al it em s to a d d t o th e HP NetSer ver ( m emor y, a ccess or y boa r ds, ma s s stor ag e, or pr ocess or s) , r em ove th e bezel an d the t op cov er . ◊ If th e re are n o o ptio nal ite ms to i nstal l, s kip to S tep 12.
Chapter 1 Setting Up th e HP NetServer 7 13 . Conn ect th e moni t or, k eyboa r d, an d mous e t o th e r ear of t h e HP NetS er ver . Re f e r t o Ch a pt e r 9, "Con n ec t in g Mon i t or, Ke yb oa r d, M ou s e, an d UPS . " 14 . Conn ect al l ot h er ext er n al ca bl es t o th e r ear of th e HP Net Ser ver .
.
9 2 Controls, Ports, and Indicators Front of HP NetServer Th i s cha p t er d escr i bes th e con tr ols, p or t s an d in di ca t or s on th e fron t and r ear of the H P NetSe rver LC 20 00 and L C 2000r. Fi gures 2-1 and 2-2 below sh ow th e H P NetServers LC 2 000/ LC 2000r as pedes tal a n d rack models r espec t ively .
Chapt er 2 Cont ro l s, Port s, and In di cat ors 10 Power , Res et, and Key b oard Lo ck Bu tton s The co n tr ol but t ons s h ow n i n Figures 2-1 and 2-2 are des crib ed i n the T a ble 2-1 .
Chapt er 2 Control s, Port s and Ind ic ator s 11 Fron t Pan el LED I n dicator s Table 2-2. Co m ponent I ndi cators LED IC ON Descrip ti on Disk LE D This Disk L ED has tw o d istinc t iv e state s: o ff fo r inac tive ope r atio n b linkin g G ree n fo r SCSI d rive act ivity .
Chapt er 2 Cont ro l s, Port s, and In di cat ors 12 Hot Sw ap Disk Dr i ve Indicators Eac h of the H ot S w ap ha rd d isk d rive s has tw o L ED i ndica tors , one f or o peratio nal st atu s a nd o n e f or ac t iv ity status.
Chapt er 2 Control s, Port s and Ind ic ator s 13 Non-H ot Swap Dev ice In dicator s T he i ndic ato rs f o r no n-H ot S w ap de v ice s, w hich p rov ide o pe r atio n al s tatu s, are also show n in Figu r e 2 -3. T h e i n dicato r s show n in Fig ure 2-3 also app l y t o th e rack-mou n t mode l (LC 2000 r ).
Chapt er 2 Cont ro l s, Port s, and In di cat ors 14 Rear Panel Ind icators and Ports Th e HP NetS er ver ’ s rear pan el in cl u d es com m un i ca ti on p or t s , th e A C power inlets, a nd t h e NetSe r ver’ s po we r supplies . Fi g ur e 2 - 4 sh ows th e rear of t h e HP NetS er ver .
Chapt er 2 Control s, Port s and Ind ic ator s 15 Pow er Su pply Modu le I ndica tor Each H P NetServe r po wer supply m odule has an indicato r a s s h ow n i n Figure 2-5, and eac h powe r supply h a s i t s ow n pow er cord co nn ection.
Chapt er 2 Cont ro l s, Port s, and In di cat ors 16 Communi c at i o n Port s Th e conn ect or s on th e H P N et Ser ver ’ s r ear p an el are sh own i n Fig ur e 2-6 an d desc r ibed b el ow. Keyb oard Mo use Video NIC (Emb edded ) Se r ia l Mana gement Fi gure 2-6.
Chapt er 2 Control s, Port s and Ind ic ator s 17 NIC In d icato rs The e m be dded N IC (Netw ork Inte r fac e Ca rd) has two LEDs asso ciate d w ith it, whi ch can on l y b e se en fr om th e r ear of th e HP Net S er ver . S ee Fi g ur e 2- 7 an d Tab le 2-6 .
Chapt er 2 Cont ro l s, Port s, and In di cat ors 18 A ppl y ing Power to the HP NetServer Po wering Up the HP NetServer 1. En sur e th e H P N et S er ver ’ s power cor d or p ower cor ds ar e conn ect ed to th e pow er source. See Figure 2-4. 2. Pr ess t h e Po wer butto n on the f ro n t co n trol pa n el.
Chapt er 2 Control s, Port s and Ind ic ator s 19 Sleep S tate s (AC PI ) The H P Ne tServe r supports the A CPI (Adva n ced Conf igu ratio n and Po wer Int er face) st and ard, wh i ch is a key comp on en t of a NOS’ s direc ted power manage me nt.
Chapt er 2 Cont ro l s, Port s, and In di cat ors 20 NOT E T he H P N e tS erv er p o w er b ut to n w il l f o rce a p o we r do w n with out waitin g fo r th e NOS to g racefull y sh ut dow n the sy stem i f t h e po wer butto n is p r essed a nd held i n exc ess of fo ur secon ds.
21 3 Opening and Closing the HP NetServer Introduct ion T h is ch apte r des cribe s ho w to s afe l y exte n d the r ac k- mou nted H P N etSe r ve r LC 2000 r out of the rack and h ow to remov e and replace th e co vers f rom the H P NetServer LC 2000 r and th e pede stal m odel, H P NetServe r LC 2000 .
Chapt er 3 Openi ng and Cl osi ng t he HP NetS erv er 22 Removing the HP NetServer’s Covers Th e HP Net S er ver ’ s cover s ar e desi gn at ed t op an d bott om f or th e r a ck - m ount ed v e rsio n a n d le f t a nd ri g ht f o r t he pe de st al v e rs io n.
Chapt er 3 Openi ng and Cl osi ng t he HP NetS erv er 23 3. Pr es s th e power s wit ch on th e HP NetS er ver ’ s con tr ol pan el when pr om pt ed b y t h e ope r a ti n g s yst em . No rmally , this co mplete s the po w er do w n pro ce dure. 4. Di s con n ect th e p ower cor d or cor d s fr om th e power sour ce.
Chapt er 3 Openi ng and Cl osi ng t he HP NetS erv er 24 6. Sw ing t h e b ezel o pe n to the le ft to ac ce ss th e B eze l Re lease Tab. 7. Pre ss dow n on the b lue R ele ase Tab as s h ow n in F igure 3-2 to rele ase the b eze l f rom t h e c h assis .
Chapt er 3 Openi ng and Cl osi ng t he HP NetS erv er 25 9. Unscrew t h e sl ide se curi ng sc r ew (2) on eac h b r acket sec urin g t h e c hassis to th e colu mn adap t er on ea ch si d e of th e r a ck.
Chapt er 3 Openi ng and Cl osi ng t he HP NetS erv er 26 Figure 3-4. E xtending the HP NetServe r LC 2000 r CAUT IO N T o pr eve n t da m a g e t o th e cov e r s, su pp or t t h e cove r a s you r e m ove i t fr om t h e HP N et Se r ver . Th e Ne t Ser ver ’ s c ove r s a r e he av y .
Chapt er 3 Openi ng and Cl osi ng t he HP NetS erv er 27 To p C o v e r Bottom Co ver Cover Pul l Figur e 3-5. Removing H P Ne t Server LC 2000r Cove r s 15 . If n eces s a r y , r em ove th e bott om cov er by loosen in g th e th um bscr ew at th e fr on t of t h e HP NetS er ver with on e han d.
Chapt er 3 Openi ng and Cl osi ng t he HP NetS erv er 28 24 . Sl i d e th e H P Net S er ver in t o th e ra ck . 25. To r ep lace the f r ont b e zel, rev erse the pro ce dure b y pos itioning t he b eze l over th e hin g e pin s at th e fron t of th e HP Net Ser ver ’ s ch a s si s .
Chapt er 3 Openi ng and Cl osi ng t he HP NetS erv er 29 3. Pr es s th e power s wit ch on th e HP NetS er ver ’ s con tr ol pan el when pr om pt ed b y t h e ope r a ti n g s yst em . No rmally , this co mplete s the po w er-d o wn p r oc edure . 4.
Chapt er 3 Openi ng and Cl osi ng t he HP NetS erv er 30 6. T o re move the lef t side co ver, use t h e key pr ov i ded to u n l oc k the Mass St or a ge C a ge an d r el ea se th e l eft si de cov er .
Chapt er 3 Openi ng and Cl osi ng t he HP NetS erv er 31 12. To r ep lace the lef t side co ver, p o sitio n t h e c ov er’s tab s n ext to t he r esp ect i ve h ol es a l ong th e ou t er ed g e on th e side of th e ch a s si s . 13 . Sl i d e th e cover t owar d th e r ear .
Chapt er 3 Openi ng and Cl osi ng t he HP NetS erv er 32 Rem ovin g the Pede sta l The pede sta l v ersion o f th e H P Ne t Server LC 2000 mounts to an a nti-tip pe destal, w h ich c an b e e asily r emo ved, if ne ce ssa ry . 1. Perfo rm Steps 1-4 i n th e p r ev ious s ec tion, "Re m oving Co ve r s – Pedes t a l (LC 2000) .
33 4 Installing M ass Storage Dev ices Introduct ion T h is c hapte r de sc r ibe s how to i n stall the inte rnal mass sto r age dev ice s, inclu di ng th e in t e r n a l S C S I Hot S wa p h ar d di sk dr i ves a n d th e op ti on a l T a p e Ba ck u p (DA T ) Dri ve.
Chapt er 4 Inst all i ng M ass St or a ge Devic e s 34 Driv e Bay Shelves Th e n on -h ot swap dr i ves in clu d e th e I DE CD- ROM an d th e 3. 5 in ch flex i bl e d i sk drive s w h ich are st anda rd fo r all H P NetServe r models (L C 2000/2000 r ) an d ship w i t h each u nit.
Chapt er 4 Inst all i ng M ass St or a ge Devic e s 35 Yo u c an c hange t his b oo t orde r usi ng the Setu p U tility (B IO S) and t h e SC SI Co nfigu r atio n Utili ty during the boot p r oces s . Re f e r t o Ch a pt e r 1 0 " C on fi g ur in g t he H P N et Se rv er" f o r mo re i nf o rm at io n.
Chapt er 4 Inst all i ng M ass St or a ge Devic e s 36 Mass S torage Gu idelin es • Gen er a l Gu i d elin es ◊ Use ca r e wh en un pa ckin g an d h an d lin g th e d i sk dr i ves.
Chapt er 4 Inst all i ng M ass St or a ge Devic e s 37 • SCSI Dri ve Addressin g ◊ T he d riv es in the H ot S wap Cage are auto ma tic ally ass ig n ed S CSI addr esses by t h e HP NetServer .
Chapt er 4 Inst all i ng M ass St or a ge Devic e s 38 If t h ere ar e ga p s in th e ca g e, th e dri ves m a y not r ecei v e t h e pr oper v entilatio n a nd c ould suf f e r the r mal d amag e .
Chapt er 4 Inst all i ng M ass St or a ge Devic e s 39 1 1 01 23 89 A A A A A A 2 2 Slo t Nu m ber Di sk Dri ve SCSI Devi ce ID SCSI Conne ct or 3 3 4 4 5 5 6 6 1 1 02 8 A A A 2 2 Sl ot Nu mbe r Di sk.
Chapt er 4 Inst all i ng M ass St or a ge Devic e s 40 S l ot N u mb e r D is k Dri v e SCS I Devic e I D S C S I C o n necto r 1 1 0 1 2 3 8 9A A A A A A 22 33 44 5 5 6 6 Sl o t N u m be r D i sk D r.
Chapt er 4 Inst all i ng M ass St or a ge Devic e s 41 1 1 0 12 01 2 A A A B B B 2 2 Slot Number Disk Drives SCSI Device ID SCSI Connector 3 3 4 4 5 5 6 6 Con B Con A Center Line 1 1 02 0 2 A A B B 2S.
Chapt er 4 Inst all i ng M ass St or a ge Devic e s 42 Pe de s tal C on f ig ura t io ns f or SCSI Hot Swap Mass Storage Cag e Duplex Board In stalled - T wo Bus Control Co nne ct ors A and B Center L.
Chapt er 4 Inst all i ng M ass St or a ge Devic e s 43 Ca b li ng Conf ig urat i o ns There are v arious SCS I c able co n figurat i ons asso ciated w ith the HP NetS erv er an d if al l p oss i bl e SC S I d evi c es a n d con n ecti on s ar e used , th en an ad di ti on al SCSI di sk con tr oll er i s r eq u ir ed.
Chapt er 4 Inst all i ng M ass St or a ge Devic e s 44 SCSI C able C onfi gurat io n s Hot-Sw ap and Non- Hot Sw ap D rives (Singl e Bus Con trol - No Duple x Board In st all ed) SCSI Channel A SCSI C.
Chapt er 4 Inst all i ng M ass St or a ge Devic e s 45 SC SI Cabl e Co nfigurat io ns Hot-Swa p an d Non-Hot Swap Dr ives (T wo Bus Con t rol - Du plex Boar d I nst alled) SC SI Chann el A SC SI Chann.
Chapt er 4 Inst all i ng M ass St or a ge Devic e s 46 Inst all ing Hot S wap H ar d D riv es U se this se ctio n to i nsta ll H ot S w ap hard driv es in the H o t Sw ap driv e c age . CAUT IO N Prot ec t the d rive fro m static ele ctrici ty by leav in g it in its ant i-sta tic b ag until yo u are r eady to i nstall it.
Chapt er 4 Inst all i ng M ass St or a ge Devic e s 47 3. Remove an y drive space r s, if n ece ssary : a . Sl i de t h e dr i ve s p a cer ba c k , a fr a cti on of an i n ch awa y fr om you r bod y a s you fa ce t h e fr on t of t h e dr i ve. Driv e sp ac ers att ach to the dis k d rive mod ule w ith f our s mall f ee t.
Chapt er 4 Inst all i ng M ass St or a ge Devic e s 48 CAUTI ON T o pr even t sn ap p in g off th e han d l e do n ot us e ex tr em e for ce when open in g it.
Chapt er 4 Inst all i ng M ass St or a ge Devic e s 49 CAUTI ON Use cautio n w h e n ha n dli n g t h e driv e to p r ev ent d amage to the fr a gi l e li gh t pi pe s a s you i n s er t th e dr i ve . 5. Gen t l y sli d e th e dri ve m od u l e in to th e ca g e an d st op wh en you fe el r esi stan ce.
Chapt er 4 Inst all i ng M ass St or a ge Devic e s 50 Remo ving Hot Swap Hard Dri ves CAUT I ON You m ust remo ve th e dr ive s low ly to ens ur e the dri ve he ads ar e par ked pr ior to remo val. Ensu r e y ou f ollow th ese i nstruc tio n s c are f ully to p rev ent handli ng da mage, suc h as head sl aps o r head ac tuato r unlo c king.
Chapt er 4 Inst all i ng M ass St or a ge Devic e s 51 Installi ng Non-Hot Swap Storage Devi ces Use t h i s s ect i on t o in stal l an y of th e n on -h ot swap ma s s s t ora g e d evi ces u s ed a s a hard d r ive o r a tape b ackup sto r age.
Chapt er 4 Inst all i ng M ass St or a ge Devic e s 52 3. If wo r king o n a pede stal- mou nte d Ne tSe r ve r, re mov e the be zel a nd ga in acc es s to the H P N etS erv er’s no n -ho t sw ap-d r ive bay s. Re f e r t o Ch a pt e r 3, "O p en in g an d Cl osin g th e HP N et Ser ve r .
Chapt er 4 Inst all i ng M ass St or a ge Devic e s 53 Connecting External SCSI Devices Th e HP Net S er ver ma y pr ovi d e an ext erna l S C SI conn ect or ( op t i ona l ) at th e r ear panel knoc kout as s h ow n in Figu r e 4-14 .
.
55 5 Installing A dditional M emory Introduct ion T his c hapte r pro vide s the inst r uct ions fo r inst al ling a n d re mov ing DIM Ms on t he sy stem boar d i n the H P NetSe rver LC 2000 or L C 2000 r. The v ideo m emory co m es with 2MB standard an d ca nn ot be upgraded.
Chapt er 5 Install ing Additio nal M emor y 56 Mem ory In stallation Gu ideline s • The H P NetSe rver LC 2 000/ 2000 r uses onl y 133 MH z (PC133) SDR AM DIMMs, whi ch a r e elect r i cally different fr om t h e EDO and PC100 SD RA M me mory modu le s u se d in p r ev iou s H P Ne tServe r mo dels .
Chapt er 5 Install ing Additio nal M emor y 57 To inst all ad di tio n al me mo ry in the H P Ne tSe rve r , ref er to the fo llow in g proce dure. 1. To gain acc ess to the H P Ne tSe rve r , pe r fo rm o n e o f the p r oc edu res lis ted bel o w.
Chapt er 5 Install ing Additio nal M emor y 58 5. In sert th e DIMM fully into th e slot, han dling the DIMM by i t s ed ges. See Figures 5-2 and 5- 3. T he reta ining cl ips s h ould g rasp t h e DIM M auto mat ically if it is i nse r ted pr operl y.
Chapt er 5 Install ing Additio nal M emor y 59 7. If th e Ne tS erve r is in a r ac k inst allat ion , retu rn t h e c h ass is into the r ac k. Re f e r t o Ch a pt e r 3, "O p en in g an d Cl osin g th e HP N et Ser ve r . " 8. R e-insta ll t h e b eze l onto the fro nt o f the H P Ne tSe rve r .
Chapt er 5 Install ing Additio nal M emor y 60 Figur e 5 -4. Remov ing a D IM M Module 6. Repeat Steps 2 throug h 5 to remov e an y additional de sired DIMMs on t h e sy ste m bo ard . NOT E En s ur e th e r et ain ing cl ips on th e DIMM slots for each DIMM ar e cl osed be f or e r epla cin g th e cover on t o th e HP NetSer ver .
61 6 Installing A dditional Boards Introduct ion T his ch apte r de sc r ibe s ho w to i n sta ll ac ce ss o r y bo ar ds i nto t he s y ste m b oard o f t he H P NetServer LC 2000/2000 r. T h e sy stem bo a r d p rov ides up to six P CI slots (P1 throug h P6), tw o of w h i ch are 64-bit slo ts.
Chapt er 6 Install ing Add itio nal Board s 62 Boot Pr io rity T his s ec tion de ta ils the H P N etSe r ve r ’ s b oo t orde r by hig h est to lo wes t prio rity . Th e N et Se r ver ’ s bo ot or d e r ( BI O S s ea r ch or d er for a bo ot dr i ve) s h ou l d be co n side r ed w he n se lec ting a slo t o n t h e sy ste m board .
Chapt er 6 Install ing Add itio nal Board s 63 I RQ Settings T he IR Q s etti ngs are au tomat ical ly assigne d and d o n ’ t re quir e use r i nte rve n tio n .
Chapt er 6 Install ing Add itio nal Board s 64 • Two PCI slots (P 5-P6) suppo r t f ull-l engt h 32- or 64-b it bo ar ds a t c l ock rates o f 33 MH z . T h ese s l ots o nl y suppo r t +5 VD C po wer a nd U n i versal boards. Th ese s lots h ave key s in th e uppe r half o f th e b oard slot to preve n t 3.
Chapt er 6 Install ing Add itio nal Board s 65 Shad ed re ct an gle r epr es ents t he posi tion of sli de sw itc h. 2 Proc essor Sp ee d (Bit 1) 3 Proc essor Sp ee d (Bit 2) 4 Proc essor Sp ee d (Bit 3) 5 Cl ear Conf ig uratio n 6 Clea r Pass wo rd 8 FSB Sp eed (1 33 /10 0 M Hz ) Op e n = O ff Closed = On Re ar o f HP NetSer ver Figur e 6 -2.
Chapt er 6 Install ing Add itio nal Board s 66 5. Ga in a cces s t o th e N et Ser ver by per f or min g th e ap pr opr ia t e p r ocedu r e for the Ne tServe r LC 2000 or t h e LC 200 0r.
Chapt er 6 Install ing Add itio nal Board s 67 8. Remove th e s lot co ver from t h e N et Se rv er’ s re a r p ane l , b ef o re i ns ta lli ng th e n ew boa r d int o th e s l ot , as sh own in F i g ur e 6- 3. 1. O pen T a b 2. Li ft La tch 3. Remo ve Sl ot Co ver Figur e 6-3.
Chapt er 6 Install ing Add itio nal Board s 68 9. Before i nstalling t h e new PCI bo ard: ◊ Ve r ify the re is no ha n dle attac hed to it , esp ec ially if it is a f ull-le ngt h board. ◊ If it has a ha ndle att a ched, re m ove t h e h andle b efore instal ling t h e bo ar d i nto the slo t .
Chapt er 6 Install ing Add itio nal Board s 69 1. Insert Board 2. Cl ose Latch 3 . Tu r n Ta b Figure 6-4. Inst alling t he Accesso r y Board 12. Secure t h e PCI bo ar d as s h ow n in F igure 6- 4.
Chapt er 6 Install ing Add itio nal Board s 70 16. If all i n s talla tio n wo rk is c o mplete , re turn po we r to the N etSe rve r accord in g to the respecti ve NOS power up instru ct i on s.
71 7 Installing A dditional Processor s Introduct ion The H P NetSe rver LC 2 000/ 2000 r suppo rt s tw o processo r s in p ri mary a nd sec on d ar y slot s an d both pr ocess or s m u st op er a t e at th e sam e sp eed an d cach e size . The H P NetSe rver supports the Pentiu m III proce ssors at a f ro n t side b us (FSB ) spe ed of 133 MH z.
Chapt er 7 Ins t all ing Additio nal Pro ce ssor s 72 CAUTI ON D o n ot s et th e pr ocess or sp eed swi t ch es t o an y oth er sp eed , a s t his ca n resu l t in u n reli able o r i nte rmit te nt perf orm a n ce , and dat a i nteg r ity may also be at risk .
Chapt er 7 Ins t all ing Additio nal Pro ce ssor s 73 Installi ng the Processor T he i ns ta llatio n pro ce dure is the s a me f o r the rack -mo unted mode ls as f o r the pe des tal mo de ls o f th e N etS erv er once yo u gai n a cce ss to th e system bo a r d .
Chapt er 7 Ins t all ing Additio nal Pro ce ssor s 74 6. Veri fy th e p r ocessor sp eed an d FSB settin g, before in sta ll in g the sec ond proce ssor mo dul e. See F i gures 7- 1 a n d 7-2 , a nd Tab l es 7-1 and 7-2 . Bot h pr ocess or m odu l es mu st ha ve th e sam e cl ock s p eed , ca ch e siz e, F SB speed , an d produ ct n um ber .
Chapt er 7 Ins t all ing Additio nal Pro ce ssor s 75 NOT E So me proce ss or speeds listed i n Table 7-1 may n ot be supported. Fo r th e lates t suppo rt i n fo r matio n , v i sit t h e H P w eb site : http://www.
Chapt er 7 Ins t all ing Additio nal Pro ce ssor s 76 9. Rem ove t h e t er min ati on fr om th e s econ d ar y pr ocess or sl ot by pr ess i n g in on the tab s and pulli n g d ir ectly upwards.
Chapt er 7 Ins t all ing Additio nal Pro ce ssor s 77 10 . Rem ove t h e p r ocess or m odu l e fr om th e seal ed ba g . 11 . Op en th e la t ch es on t op of th e pr ocess or s l ot .
Chapt er 7 Ins t all ing Additio nal Pro ce ssor s 78 2nd VRM VRM La tc hes Fi g u r e 7- 6 . I n s t all i n g V RM CAUTI ON T o pr even t da ma g e t o the V RM, d o not push on th e lar ge fl at sur face or tou ch the com p on ent s on th e boar d as you pu sh the VRM car d dow n int o th e sl ot.
79 8 Rack M ounting th e HP NetServer Introduct ion T his c hapte r tells ho w to mo un t t h e HP NetS erv er i n an H P Sy ste m/E o r Sy stem/U rac k. The illus tr atio n be low show s the c h arac te ristic s o f the S y stem/E and S ystem / U r a ck s .
Chapt er 8 Rack-M ountin g the HP NetServ er 80 NOT E If y o u w ant to pu t y ou r Ne tS e rv er i nt o a t hi rd- p a rty rac k no t men tioned in t he guid e, y o u may be able to f in d re lev ant do cume n tatio n o n H P’ s w eb s ite at t he f ollow in g U R L : http://www.
Chapt er 8 Rack-M ountin g the HP NetServ er 81 Safety Pr ecauti ons Alw a y s kee p the f o llow ing s afe t y an d e n viro n me ntal issue s in mi nd, e spe cially if you in st al l th e H P Net Se.
Chapt er 8 Rack-M ountin g the HP NetServ er 82 Preparing the Rack Th e col u mn adap t er s an d ra ck n u t s mu st be conn ected t o th e r a ck befor e mou n t in g th e sl i d e mech an i sm. On ce th e sli d es ar e cor r ectl y moun ted , t h en th e HP Net S er ver LC 2 00 0r can be in sta ll in g int o th e rack .
Chapt er 8 Rack-M ountin g the HP NetServ er 83 1. Find th e rack-mo unt ing templ ate. If yo ur H P Ne tServ er is still in its b ox , the temp late s h ould be in t h e acces s or ies tr ay th at sit s on top of t h e Net S er ver it sel f. 2. Ho ld t he te mpl ate alo ngside the o utsid e f ace (f r ont) o f t h e le f t f r ont rack co lumns.
Chapt er 8 Rack-M ountin g the HP NetServ er 84 # # # # # "#" # Bottom of HP Net Serv er Ma rk t his fa ce of th e left- fr o n t and right-front co lumns. Right Lef t Fr ont of Rack r epres ents the E IA unit numb er s on t h e ra ck co lum ns .
Chapt er 8 Rack-M ountin g the HP NetServ er 85 A ttachin g the Co lumn Adapter s and Sl ides 1. Pu ll t he a nti-t ip fo o t forw ar d o ut o f the b o tto m of t h e r ack . Se e F igure 8 -6 f o r t h e ant i-tip f o o t loc ation. 2. Alig n t he lef t HP colum n ad apte r to the lef t fro nt c olum n as s how n i n Figure 8-5 .
Chapt er 8 Rack-M ountin g the HP NetServ er 86 b . The two hole s in t he mou n ting f la nge s hou ld li ne up w ith t h e c apt ive nuts (at 7th and 9th h ole s) i n the co lum n ada pte r a n d t he tw o rac k nuts you in st al l ed on ea ch r ear col u mn .
Chapt er 8 Rack-M ountin g the HP NetServ er 87 8. Fa s t en th e sl i d e’ s rear br a ck et t o th e ra ck nu t s on th e left - r ear col u mn . a. S ec ure t h e s c rew s o n ly loo se l y at first , so the br ack et ca n se ttle into t he lo wes t pos sible pos ition.
Chapt er 8 Rack-M ountin g the HP NetServ er 88 Slid e Mem ber s Ant i-ti p Foot Level er Scre w s (4) Mou nt i ng T abs Fig ure 8-7 . P ullin g Out the S lid es 3. Pull o ut b oth s lides u nti l t he sl ide me mbe r s a r e f ully exte n ded. See Figur e 8-7.
Chapt er 8 Rack-M ountin g the HP NetServ er 89 Channel(2) Figur e 8-8. Mou nti ng the HP Ne t Server on the Slides 7. Mo v e the sl ide me mbe rs in to the N etS e r ve r ’s c h annels until bo th s lide mem ber s ar e u n d ern ea th al l four of th e N et Ser ver ' s han d l es .
Chapt er 8 Rack-M ountin g the HP NetServ er 90 Figure 8-9. Re m oving th e Moun t i ng Hand l es 10. In se rt the f lathead screw s into the sli des’ holes at the rear and t h e pa nh eads scr ews i n the oth er four pl a ces t o secu r e the ch a ss i s to th e s li d es.
Chapt er 8 Rack-M ountin g the HP NetServ er 91 Figure 8-10. P ressing in t he Release L at ches 14. V erify the Ne tServ er w ill sl ide a ll t h e way into the rack , b ef o r e c o ntinui ng wit h th e pr oced u r es.
Chapt er 8 Rack-M ountin g the HP NetServ er 92 WARNI N G Be f or e s l i d i n g ou t t h e HP N et Se r ver LC 2 0 00r , e n sur e th e an ti - ti p foot i s st il l ex t en d ed fr om th e fr o n t of th e ra ck . A tip-o v er h aza rd ex ists , so nev er sl ide mo r e t ha n one co mpone nt ou t o f th e rack at a time .
Chapt er 8 Rack-M ountin g the HP NetServ er 93 Rear o f HP NetServ er Left Rear Rack Co lumn Ca ble Ma nag em ent A rm Figur e 8-12. At t aching the Cable M anage m ent Arm 5. Attac h the ot h e r fla nge of the c ab le a rm to the re ar c olum n of the rac k w ith the tw o M-5 pan h ead T -25 Torx s c r ew s, which are included with t h e A r m.
Chapt er 8 Rack-M ountin g the HP NetServ er 94 A ttachin g the Fr on t Beze l T he f r ont b eze l att ac h es to the H P N e tSe r ve r by a hinge on th e lef t and a l atc h o n th e r igh t. Th e h in g e ha s th r ee s pr in g -loa ded h in g e pin s t o s ecur e th e bez el.
Chapt er 8 Rack-M ountin g the HP NetServ er 95 2. Pr ess do wn on t h e blue Bezel R elease Tab s how n in Figure 8-13. Figure 8-14. A ttach ing the B ezel to the NetServe r 3. Pre ss the b eze l onto the fro nt o f the H P Ne tSe rve r a nd r ele ase t h e Blue Tab to e ngage t h e hinge pins.
.
97 9 Connecting the Monitor, Key board, Mouse, and UPS Introduct ion T his c hapte r pro vide s the inst r uct ions fo r co nn ec ting a mon ito r , ke yb o ar d, mo use and U n interruptible Po we r Supply (UPS ) to the rea r of th e H P Ne tServe r .
Chapt er 9 Conn ecting th e M onitor , Keybo ard, M ouse, a nd UPS 98 NOT E I f you h a ve a c on s ol e s wi t ch box, r e fer t o t h e swi t c h box ’ s u s er guide f o r inst r uctio n s o n connec ting the ke y boar d, mouse , and mo n ito r.
99 10 Configur ing the HP NetServer Introduct ion This c hapte r suppo rts setting up so ftw ar e on y our HP NetSe r ver LC 20 00/2000r. Yo u may choo se to do this b efo re o r af ter y ou inst all the Ne tServ er i n the rac k.
Chapter 10 Confi gurin g t he H P NetServer 100 B efore the H P Nav igato r ma i n me n u is d ispl ay ed, yo u may be prom pte d to s et the language, time, and da te.
Chapter 10 Confi gurin g t he H P NetServer 101 Document Number X X X X Figur e 10 -1. Location of Document Nu mber on Navigator CD Yo u c an o btain t he R ele ase H isto r y an d S t atus Re po r t fo r yo ur CD-R OM in o n e of th ese wa ys: • In t er n et WWW-- http ://w ww.
Chapter 10 Confi gurin g t he H P NetServer 102 T he CD -RO M w ill sta rt auto mat ically usi ng t h e auto- run f eatu r e as so on as th e dr i ve cl oses. NOT E U sing the lo w prof ile CD -RO M d r ive is sl ig htly dif fe rent t han f ull-hei ght u n its.
Chapter 10 Confi gurin g t he H P NetServer 103 Running Co nfiguration A ssi stant and Insta ll at i on A s sistant Insert t he HP N e tSer ver Navig a tor CD- ROM into t h e CD-R OM d ri ve . Turn the pow er of f , w ait 10 se co nds, and tu rn t h e po we r o n aga in.
Chapter 10 Confi gurin g t he H P NetServer 104 Pe r fo r m a n auto mate d NOS inst allatio n fo r fi r st- time inst allat io n of Novel l N et Wa r e/ In tr an etWar e or Mi cr oso ft Win d ows NT S er ver on a factor y-confi gu r ed Net Server .
Chapter 10 Confi gurin g t he H P NetServer 105 • Co n figu re R emo te Manag eme n t: T his u tili ty co n fig ures t he I nteg rated Re mote Manage me n t de vic e fo r remo te manage me n t. I t e nab les remo te, dial-u p H P Ne tSe r ve r manageme n t.
Chapter 10 Confi gurin g t he H P NetServer 106 Custom Configur at ion Only select Cust om on th e Configur ati o n Assi stan t menu if y ou a r e experienced in Net Ser ver con fi g ur ati on an d ha ve a pr efer r ed s eq u en ce of st ep s, or if you pr efer to co n figu re y ou r sy stem o ne c o mpone nt at a time .
Chapter 10 Confi gurin g t he H P NetServer 107 Replicate Confi g urati o n In R ep licate co nfigu ratio n mo de, y ou can s av e a co p y of yo ur cu rrent sy stem co nfiguratio n or lo ad a prev ious l y sav ed co n figurat io n. This met hod s av es time w h en co nfigu ri ng mu ltip le , id e ntic al s y ste ms.
Chapter 10 Confi gurin g t he H P NetServer 108 HP Manage ment So lutions H P Mana ge ment S o lutio ns is a c o mp r ehe n s iv e su ite o f utilitie s, a ppl ic atio ns, a nd b uilt-in f eatu r es to ma nage m ul tiple HP NetS erve rs lo cally o r fro m remo te lo catio n s.
Chapter 10 Confi gurin g t he H P NetServer 109 • Easy linkage w it h le ading ma nage me nt pl atfo rms i nclu ding H P Op e nVie w Netwo r k Node Manage r • Suppo r t fo r DMI 2 .
Chapter 10 Confi gurin g t he H P NetServer 110 HP I n tegrated R emote A ssistan t Yo ur H P N etSe r ve r co mes w ith a b uilt in pro duc t ca lled the H P I nteg rated Remote Assi st an t (r eferr ed to as Integra t ed RA).
Chapter 10 Confi gurin g t he H P NetServer 111 • SNMP Age nt s – SNMP age n t s enable in - ban d (across th e net work) ga th ering of inform at i on and al ert gener a ti on t o a n SNMP- based man ageme n t c lie nt.
Chapter 10 Confi gurin g t he H P NetServer 112 Setup Utili t y T he H P N etS erve r has a S etup U tility (BI OS) in read-o nly memo r y . The u t ility f eatures sev eral sy ste m co n fig uratio n and ho us ek eep in g o pt ions, incl udi ng secur i t y, an d syst em con sol e ch ara ct er i st i cs .
Chapter 10 Confi gurin g t he H P NetServer 113 ◊ Em bedded LAN & SCSI Settin gs – U s e this me n u to se t the emb e dded NI C t o en a bl e , di s a bl e , or e n a bl e a s a boot de vi c e (Boot R OM En a bl ed ) .
Chapter 10 Confi gurin g t he H P NetServer 114 • Pr es s th e ri ght -a r r ow an d l eft -a r r ow k e ys t o m ove be t we en s e l e c t i on s on t he me nu b ar. T he me n u b ar is p rese nt at t he to p of the mai n sele ctio n s . • Press t he up-a rr ow an d do w n -arr ow keys to mo ve be t ween fields o n eac h scr een .
Chapter 10 Confi gurin g t he H P NetServer 115 5. Typ e in the secon ds an d pr ess Enter , t h e n use t he a rr ow key s to leav e this fi el d . 6.
Chapter 10 Confi gurin g t he H P NetServer 116 3. If n eces sa r y , u se th e arr ow key to mov e t o th e Power- O n Password menu sel ect i on an d pres s Enter . The Power -On Passwor d i s h ig h li gh t ed by de fa ul t when th e Securit y men u is s el ect ed .
Chapter 10 Confi gurin g t he H P NetServer 117 NOT E To leav e the pop-up menu w ithout enteri n g a pass w ord, press th e Esc k ey at any time . 8. Ch oo se Yes and th en pr ess th e En ter key .
Chapter 10 Confi gurin g t he H P NetServer 118 17. T o use th e H ardware Se cu r it y menu u nder Sec urity , use the h elp f i l es pro v ided w ith the se lectio n s. 18 . Sel ect t h e Esc key to ex it t his me n u. 19. U se the rig ht-ar row key to g o to t h e Ex it menu .
Chapter 10 Confi gurin g t he H P NetServer 119 3. Press Enter to c hange the orde r a nd a lis t ap pea r s v ery simila r to the o ne bel o w: 1. [CD- ROM] 2.
Chapter 10 Confi gurin g t he H P NetServer 120 ◊ If m or e th an ei gh t l ogi cal dri ves ar e conn ect ed t o th e HP Net Ser ver , drive s 9 a n d ab ove (in cluding th e DAC or SCSI b oards a nd the d rive s co n n ec ted to eac h ) w ill no t be rec og nized by the Se tup Utili ty .
Chapter 10 Confi gurin g t he H P NetServer 121 S had ed re cta n gle re prese nt s the pos it ion of sli d e switc h. 2 P ro ces so r Spe e d ( Bit 1) 3 P ro ces so r Spe e d ( Bit 2) 4 P ro ces so r.
Chapter 10 Confi gurin g t he H P NetServer 122 3. Use t h e arr ow ke ys to mo ve t h e cur sor , pr es s [ Enter ] to sele ct a n optio n, an d pr ess [ Esc ] to e xit . 4. T o c h ange a dapte r sett ings: ◊ Se lec t an adap ter f r om the list i n t he m ai n me nu.
Chapter 10 Confi gurin g t he H P NetServer 123 Gu ide To Co n figu re Se rve r – T his me n u s e lec tion p r ov ides three sub m enus. ◊ NOS Inst al l atio n I n struc tio n s - T his s ubme nu s ele ctio n pro v ides y ou with th e necessar y instru ct i ons t o i n sta l l th e NOS y ou have selected for this i nstal latio n.
Chapter 10 Confi gurin g t he H P NetServer 124 H P Se r ver M anag e men t So lut ions – T h is me n u s ele ctio n pro vide s y ou w ith a co mprehe nsiv e suite o f uti litie s, app lica tions , a n d b uilt -i n fe ature s to man age multip le H P N etSe r ve r s lo cally or f rom r e mo te lo catio n s.
Chapter 10 Confi gurin g t he H P NetServer 125 8. Sc r oll to "W hat ’ s N ew on t he CD" in t h e ma in me nu a n d r ead it c a ref ully befo r e b eginning y our installatio n. Yo u may also us e t he tw o ic ons to "S av e to Diske tte" o r "P rint" the in for m at i on on scr een.
.
127 11 Informat ion A ssistant Overview Th e HP NetServer On li ne Docume ntati o n CD-ROM in cl ud e s In for ma ti on Assist an t, which con ta in s the e nt ir e set o f documen ta tion for your Net Ser ver .
Chapt er 11 Infor mat ion As sis tan t 128 Sea rch fo r a wo rd o r ph rase u sin g Sear ch . Sear ch p er for m s f ull-tex t se arc h es f or to pic tex t. It not o nly takes yo u to t he to pic found, b ut highlig ht s t he wo r d or w ords fo un d by th e s earch.
Chapt er 11 Infor mat ion As sis tan t 129 Copy in g and Pr in ting I nfor mati on Yo u c an c opy to pic text i n Inf orm atio n Assistant for u se in other appli cati on s, su ch as wor d pr oc es s or s , by cop yin g t ex t on t o t h e Wi n d ows C l i pboa r d a n d pa s ti n g t he te xt into any Windo w s appl icatio n .
.
131 12 T roubleshoo ting Tr oubleshoot ing Too ls If you ar e ha vin g pr obl em s in sta ll in g yo ur HP NetS er ver , th ere ar e a n um ber of dif feren t to o ls av ailab le f o r tro ub lesho oting .
Chap ter 12 Tr oublesho oti ng 132 ◊ Event Lo g Report Ut ility: D ispl ay s all lo gge d H P N etSe r ve r mana g em ent event s, Powe r - On Self Test ( POST) err or s and other s ystem ev en ts .
Chap ter 12 Tr oublesho oti ng 133 3. Pl u g a di ffer en t el ectr ical device ( su ch a s a pr in t er ) in t o th e pow er out l et , and tu rn it o n to c h eck if the fault is wit h the po wer supply . 4. Unplug the po we r cord, w a it 20 se conds, plug th e pow er co r d i n ag ain, a n d r estart th e system.
Chap ter 12 Tr oublesho oti ng 134 4. R emove all t hird-p arty optio n s, a nd r ei nstal l o ne a t a time , c hec king the sy ste m afte r eac h i n st alla tion . 5. R eplac e all c ov ers, a nd r ec on nec t the po we r co r d a nd o ther cab les.
Chap ter 12 Tr oublesho oti ng 135 The f ollow in g tab le d es crib es co mmon e rr ors and t h e c orrec tive actio n y o u may take to reme dy the p ro b lem: Table 12-1.
Chap ter 12 Tr oublesho oti ng 136 2. T he po w er ou tlet is w o rking . 3. Th e Net Ser ver an d m on it or ar e turn ed on. (T h e p ower - on in d i cat or sh ou l d be i l lu m i n at e d . ) 4. Th e d i spl a y’ s con tr a st an d bri ghtn ess set t in g s ar e cor r ect.
Chap ter 12 Tr oublesho oti ng 137 ◊ Veri fy al l DIMMs a r e HP-supplied and are seated p r operly . Th e boo t scr een pr ovides in form ati on on the in stall ed DI MMs.
Chap ter 12 Tr oublesho oti ng 138 To c lear the system c onfiguration o n th e Sy stem Bo a r d: 1. T urn o ff power to the HP NetServe r, and u nplug t h e po wer cord. 2. Remove th e f r ont b ezel a nd lef t side co ver (or top c ov er). Refe r t o F i gures 12-1 , 12-2, and t he Tec hni cal R eferen ce L a bel.
Chap ter 12 Tr oublesho oti ng 139 Hardware Problems T his s ec tion de sc rib es w hat to do if y ou hav e p r ob lems with y our dis play , mas s st or a g e d e vi ces , pr in t e r , a cces s or y boa r ds , keyboa r d , or mou s e.
Chap ter 12 Tr oublesho oti ng 140 6. If th e key bo ard lo ck LED is il lum inate d, ty pe the p assw o r d to dis ab le vi d e o bl a n kin g. 7. If a vi d eo b oa r d is in sta ll ed in an acces s or y slot , con ta ct th e man ufa ct ur er of the v ideo board.
Chap ter 12 Tr oublesho oti ng 141 Hard Disk Driv es Do N o t Work If e rr or mess a ges disp lay ed o n the mo ni t or i ndicate a h ard disk f ailure, pe rform th ese ch ecks : 1.
Chap ter 12 Tr oublesho oti ng 142 8. Plu g in t h e po w er c ord, tu rn o n po w er to t he H P Ne tSe rve r , and allo w it to co mplete its st artup rou ti ne. 9. If yo u wish t o set the passwor d again, durin g th e powe r - on system har d war e test press th e F2 fu n ctio n ke y to s tart the S etu p U tility .
Chap ter 12 Tr oublesho oti ng 143 12 3 4 5 6 Batter y Co nfi gur a t io n S wi t c h Figur e 12 -2. Battery on Sy st em Board 4. Inse r t t h e new b atte ry with t he pos itive sig n (+) f ac ing o ut , an d e n su r e it is se ated c omple tely . 5.
.
145 13 A l ternat iv e Rack M ounting Introduct ion T his c hapte r pro vide s the inst r uct ions fo r mou n ting t he H P Ne tSe r ve r i n a n H P Sy stems r a ck. Figure 13-1 show s th e Sy stems rack. If y ou have the newe r HP Sy ste m/E or S y stem/U rack s, go to Chap te r 8.
Chapt er 13 Altern ativ e Ra ck M ount ing 146 Th e HP Net S er ver LC 20 0 0r r a ck moun t k it r eq uir es fi ve E I A un its of spa ce in the rac k. Be fo re mo unti ng t h e N etS e rve r , pl an f o r t h e Ne tSe rve r’ s lo c atio n in t h e rack rel ative to o ther rack co mpo n ents .
Chapt er 13 Altern ativ e Ra ck M ount ing 147 Safety Pr ecauti ons Alw a y s kee p the f o llow ing s afe t y an d e n viro n me ntal issue s in mi nd, e spe cially if you in st al l th e H P Net Ser.
Chapt er 13 Altern ativ e Ra ck M ount ing 148 Preparing the Rack Th e col u mn adap t er s an d th e sl i d e mech an ism mu s t be con n ect ed t o th e r a ck befo r e installi n g the H P NetSe r ver LC 2000r into the ra ck. A c ar dbo ar d rac k-mo u n ting templ ate c ome s w ith t h e H P N e tSe r ve r .
Chapt er 13 Altern ativ e Ra ck M ount ing 149 1. Find the ra ck-mounting template f o r t h e H P S y stems rack. If th e H P Ne tSe rve r is s till in its b ox, t h e templ ate s h ou ld be in t h e acces s or ies tr ay sit tin g on top of th e Net S er ver its el f.
Chapt er 13 Altern ativ e Ra ck M ount ing 150 A ttaching the Sli d es to the Rac k T his s ec tion p rov ide s t h e i n s t ructio ns f o r co nnec ti ng t h e moun ti ng s lide s to the ra ck .
Chapt er 13 Altern ativ e Ra ck M ount ing 151 6. If yo u do n ’ t ha ve the templa te, use the ma r ki n gs s h ow n in Figu r e 13-4 to determi ne w hich hole o n the co lumn the sli de mo unt s t hr ough. Right Rear Studs on slides will mo unt th rou gh this face of col umn s.
Chapt er 13 Altern ativ e Ra ck M ount ing 152 c. In sert th e sli d e’ s two thr eaded s t u d s int o th e mar k ed h ol es on th e s id es of the lef t -front and l eft-rear r ack c olumns. Se e Figu r es 13-4 and 13-5 . d. Ti gh te n t he nu ts o n b ot h sc re w s.
Chapt er 13 Altern ativ e Ra ck M ount ing 153 Pl acin g the HP NetServer in the Rack U se this to pic to plac e t h e H P Ne tSe r ve r saf ely in t he rac k. The fo llo w in g to pic s provide instruct ion f or in stalli ng t h e Cab l e Manage ment A rm and B ezel.
Chapt er 13 Altern ativ e Ra ck M ount ing 154 T he sli de s c lick into po sitio n whe n lo cke d. This lo cke d po sitio n pre v ents t he slid es f rom mov ing bac k i n to t h e rack , un le ss the r eleas e l atc hes are pressed as sh ow n i n Figure 1 3-9.
Chapt er 13 Altern ativ e Ra ck M ount ing 155 T he mo unt ing tab s i n t h e sl ides sho uld b e i n po sitio n to fit into the ope n ings i n chass i s. See Fig ures 13-6 and 1 3-7. 8. Lo we r the NetS erve r o n to t h e s lide me mbe r s. The Ne tServe r ’ s h andles w i ll tempo r arily support the Ne t Se rver on t he slide s.
Chapt er 13 Altern ativ e Ra ck M ount ing 156 13 . Pr es s in th e relea se l at ch es o n ea ch sl i d e, an d p u sh th e Net S er ver al l th e wa y back in to th e r a ck .
Chapt er 13 Altern ativ e Ra ck M ount ing 157 A ttachin g the Ca ble Man agemen t A rm Us e t h i s pr oce d u r e to m oun t th e Ca bl e Ma n a g e m en t Ar m on t h e HP Ne t S e r ver LC 2000 r whe n mounted i n the H P Sy stem racks.
Chapt er 13 Altern ativ e Ra ck M ount ing 158 Th e ca p ti ve n uts ar e l oca t ed n ear th e ex t ern al SC SI C onn ect or ( kn ockou t ) lo catio n . C able M anag eme nt A rm Rear of H P NetSe rver Lef t Rear Rack C olu mn Fig ure 13 -11 . A ttac hing the Cab le Manag eme n t Ar m 5.
Chapt er 13 Altern ativ e Ra ck M ount ing 159 10. P lug the N etSe r ve r ’ s po w er cab le a nd al l av ailab le da ta c able s into t h e b ack of th e Ne tSe rve r . A ttachin g the Fr on t Beze l T he f r ont b eze l att ac h es to the H P N e tSe r ve r by a hinge on th e lef t and a c atc h o n th e r igh t.
Chapt er 13 Altern ativ e Ra ck M ount ing 160 2. Pr ess do wn on t h e blue Bezel R elease tab s how n in Figure 13-12. Fig ure 13 -13 . A ttac hing the Bez el t o th e N etS e rver 3. Pre ss the b eze l onto the fro nt o f the H P Ne tSe rve r a nd r ele ase the Blu e Tab to e ngage t h e hinge pins.
161 A Specifications P ow e r Re qu i r em en t s Table A-1 . HP N etServe r LC 200 0/2000r Inp ut Pow er Inpu t Voltage and F requency 100-240 VAC ± 10%; 50/ 60 Hz Max imu m inru sh cu rrent 8 AMPs .
Appe ndi x A Specifi cat ions 162 Power Supply AC Vo ltage se lec tio n fo r this NetS e rve r is a uto matic ally de termined by th e po we r supply . Table A-3. Powe r Supply Requ i r ements (Single Un it) AC Input Power (5 0/6 0 Hz) 100 to 127 VAC, 5.
Appe ndi x A Specifi cat ions 163 Environmental Requ ir e m ents The sp ec ific ations liste d b elow can v ary if yo u i n stall a m ass s to r age dev ice in y our H P Ne tSe r ve r that has more s trin ge nt e n vi r on me nta l lim its . E n su r e the o peratin g e n vi ronme nt is sui table fo r all mass sto rage dev ice s in us e.
Appe ndi x A Specifi cat ions 164 Ph y sical Requirements Table A-6. LC 2000r Weight and D im ensions Heig ht 216 mm (8.5 in ) Width 445 mm (17.5 i n) Depth 675 mm (26 . 5 in) Weigh t 36 kg (80 lb ) Weig h t excl u d es m onit or an d keyb oa r d Table A-7.
Appe ndi x A Specifi cat ions 165 Vi deo Sup port Table A-10. Video Dr i ver Suppor t Netwo r k Operating Syste m (NO S) HP NetS erver Support ed Co mm ent s Window s NT 3.51 No No Support planned Win dows NT 4.0 Yes Pr ovided with NOS Ne tWare 5 No No D r ive r is av ailab le SCO Open Server 5.
.
167 B Regulatory Information Regulatory Notices - El ectromagnet ic Compliance Elec tro mag n et ic Co mpatib ility (EMC ) requ ireme n ts h ave be en estab lis h ed i n many co un tri es to r egulate th e radio freque n cy ener gy gen er at ed b y In fo rm a tion Technolo g y E qui pment (ITE).
Appe ndix B Regulat or y Infor m atio n 168 • Reor i en t or r el oca t e th e r ecei vi n g an t enn a. • In c r ea se th e separ at i on bet w een th e eq ui p m ent an d th e r ecei ver . • Conn ect th e equi p m ent in t o an out l et on a cir cuit di ffer ent fr om th a t t o whi ch th e recei ver i s conn ect ed .
Appe ndix B Regulat or y Infor m atio n 169 Noti ce f o r Japan T he c o n figu ratio n of the NetS erve r y ou have pu rchas ed may be in ei ther t h e class A or class B cat egor y.
Appe ndix B Regulat or y Infor m atio n 170 Noti ce f o r Korea T he c o n figu ratio n of the NetS erve r y ou have pu rchas ed may be in ei ther t h e class A or class B cat egor y.
Appe ndix B Regulat or y Infor m atio n 171 Notice f o r Taiwan Class A Warning Stat ement Noti ce f o r Eur o pea n Union Fo r Class A Pr odu cts WARNI N G C lass A P r odu cts : In a d ome stic e n vi r onme nt this p rodu ct may cau se r a d i o in t er fer en ce in wh i ch ca se th e us er may be requ ire d to take ade qua te me asu res.
Appe ndix B Regulat or y Infor m atio n 172 Declarat ion of C onformity (US, EU , Au stralia) DECLARATION OF CONFORMITY ac co r din g t o ISO / IEC Guide 22 and E N 45014 Man u f actu rer’ s/Supplie.
Appe ndix B Regulat or y Infor m atio n 173 Regulatory Notices - Pr oduct Safet y The f ollow in g i n fo r matio n app lies o nly to s erve r s w ith fac tory -in stalle d comp on en t s. CD-RO M and L aser S afety Statem ents The f ollow in g i n fo r matio n app lies o nly to s erve r s w ith fac tory -in stalle d d riv es.
Appe ndix B Regulat or y Infor m atio n 174 LA SER Safety - Finlan d LASERTURVALLIS UUS LUOKAN 1 LASERLAITE KLASS 1 LASER APPARAT H P NetServer LC 2000/LC 2000 r - ver k k op a l vel im een void a an asen ta a lisäv arustee n a lait teensis aine n CD -R OM- lukulaite , jo ka o n l ase rlaite .
Appe ndix B Regulat or y Infor m atio n 175 CLASS 1 LASER PRODUCT T his C D-R OM D riv e U nit is c las sif ie d as a CLASS 1 LASER PRODUCT. LASSER KLASSE 1 PRODUKT The C LASS 1 LASER PRODU C T l a bel is locat ed on t h e t op of t h e dr i ve. Be i diesem CD-R OM-Laufwe r k CDU 56S handelt es s ich um ei n Lase r -Produkt der Kl a sse 1.
Appe ndix B Regulat or y Infor m atio n 176 Noise and Er gon omic Saf ety S tatemen ts Noi se Declaration and Ergonomics - G ermany So un d Pressure: L pA < 5 5 dB (A) am A r be itspla tz, B e ob achte r Po sitio n (w orkpl ace , by stande r po sitio n) norm ale r Be trieb (no r mal ope r atio n ) nach DIN 45635 T .
177 C Service and Suppor t Fo r all Se r vic e a n d S uppo rt i n fo r matio n, se e th e H P N etSer ver W arr anty and Service/Sup por t Bookl et i ncluded w ith y our product.
.
179 D Warrant y and Soft w are License Warranty See t h e HP N etServer W arranty an d S ervice/Su pport Bo ok let i ncluded w ith y o ur product f o r all w arranty a nd se r vice / support info r m atio n. HP S oftware Product Lice nse A greement ATTENTION: USE O F TH E SOFTWA RE IS SUBJECT TO THE HP SOFTWARE L ICENSE TERMS SET FORTH B ELOW.
Appe ndix D Warra nty a nd S oft war e Lic en ses 180 If your Computer wa s shi ppe d with a R ec overy CD, (i) t h e Re covery CD and/o r Suppo rt U tility sof t ware m ay be use d only for resto r i.
181 Index A acces s or i es tr ou bl e s h o ot i n g, 1 3 6 acces s or y boar ds in st al la ti on , 61 aco ustic emis sio n s, 16 3 Admini stra t or Pa ssword se tting, 1 1 7 an ti - ti p foot rac k.
Index 182 cove rs remov in g, 22, 28 cust om co n figurati o n , 106 D DAC, 132 DAT tap e drive error c o des, 13 Diag To o ls, 111 suppo r t ticket, 1 11 DIMM in sta llat i on 90 ° angl e t o sy st .
Index 183 Hot Swap ma ss stor age cag e, 34 Hot Swap SCSI dr i ves ha rdw are mi rro ri ng, 35 H W mirr o ring requ i rements, 35 RA ID level 1, 35 sof t w ar e mi rro ri ng li mitat ions, 35 HP Int e.
Index 184 lo ck mo de ke yb oa r d d i sa bl ed , 1 0 ke yb oa r d l oc k , 1 0 Networ k Ser ver mode, 10 pow er button disab led, 10 vi d e o bl a n kin g d i sa bl e d , 10 M ma ss st ora g e, 34 ma.
Index 185 regu lato ry in fo rmatio n , 167 R egulato ry Notice s - Ele ct roma gnetic Com p l ian ce, 1 6 7 R egulato ry Notice s - P rod uc t S afe t y , 173 re mo v ing pr ocess or ca g e cover , 7.
Index 186 fi n d in g th e pr obl e m , 13 3 ha r d war e pr obl em s, 13 9 no e rr or mess a ges, 135 pa sswor d pr oblems, 141 precautio ns, 131 t ool s, 1 3 1 U U n inte rruptib le P ow er Supp ly .
Een belangrijk punt na aankoop van elk apparaat HP (Hewlett-Packard) LC 2000 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen HP (Hewlett-Packard) LC 2000 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens HP (Hewlett-Packard) LC 2000 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding HP (Hewlett-Packard) LC 2000 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over HP (Hewlett-Packard) LC 2000 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van HP (Hewlett-Packard) LC 2000 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de HP (Hewlett-Packard) LC 2000 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met HP (Hewlett-Packard) LC 2000 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
