Gebruiksaanwijzing /service van het product CTI 2572 van de fabrikant IBM
Ga naar pagina of 40
CTI 2572 ETHERNET TCP/IP ADAPTER MODULE TECHNICAL OVERVIEW Version 1.1 CTI Part # 062-00156 '#("#' 2572 Techni cal Overvi ew Manua l 032698 $25.
.
CTI 2572 Technical O v erview Manual Copyright 1993, 1998 Control Technology Inc. All rights reserved . This manual is published by Control Technology Inc., 5734 Middlebrook Pike, Knoxville, TN 37921. This manual contains references to brand and product names which are tradenames, trademarks, and/or registered trademarks of Control Technology Inc.
.
CTI 2572 Technical O v erview Manual i PREFACE This Technical Overvi ew Manual provides an introduction to CTI 2572 Ethernet TCP/IP Adapter and to the networking specifications used with the module.
.
CTI 2572 Technical O v erview Manual iii TABLE OF CONTENTS CHAPTER 1. I NTRODUCTI ON .................................................................................................. 1 1.1 Description .................................................
.
CTI 2572 Technical O v erview Manual v TABLE OF FIGURES Figure 1 CTI 2572 .......................................................................................................................... 1 Figure 2 Token Ring Topology........................
.
CTI 2572 Technical O v erview Manual 1 CHAPTER 1. INTRODUCTION 1.1 Description The 2572 Ethernet TCP/IP Adapter is a single wide I/O module which connects SIMATIC TI505 controllers to Ethernet networks.
CTI 2572 Technical O v erview Manual 2 1.2 2572 Functions Server Mode In Server Mode , the module responds to PLC commands embedded in the TCP/IP packet. The initiating device (usually a computer or a 2572 operating in client mode) encapsulates the PLC command in the TCP/IP protocol and transmits it to the IP address of the 2572.
CTI 2572 Technical O v erview Manual 3 CHAPTER 2. LOCAL AREA NETWORK OVERVIEW Local Area Networks (LANs) gre w from the need to interconne ct many intelligent devic es in a non-proprietary manner. Today, the most widely used LAN standards are Token-Ring (IEEE 802.
CTI 2572 Technical O v erview Manual 4 2.2 IEEE 802.5 (Token-Ring) Token Ring (IEEE 802.5) uses a ring topology. Each station on the network has two connections - one to the "downstream" station and one to the "upstream" stations.
CTI 2572 Technical O v erview Manual 5 2.3 Ethernet and IEEE 802.3 Officially, "Ethernet" is the name of a CSMA/CD network developed at Xerox. It was jointly documented by Digital Equipment Corporation (DEC), Intel, and Xerox in a 1982 specification for Ethernet Version 2.
CTI 2572 Technical O v erview Manual 6 The primary disadvantage of Ethernet is that the response time is not consistent under widely varying loads. As the network loading increases above 50% , collisions occur more frequently and the network response time increases.
CTI 2572 Technical O v erview Manual 7 2.6 Summary Older master/slave networks are rapidly bei ng replaced by standard LANs which provide better performance, multi-vendor support, and integration with information networks. Of the current LAN standards, Token-Ring and Ethernet have the si gnificant market share.
.
CTI 2572 Technical O v erview Manual 9 CHAPTER 3. ETHERNET OVERVIEW 3.1 ISO Reference Model Modern network implementations separate data communication functions into layers. Each layer performs a specific set of services and interacts with layers above and below in a well defined way.
CTI 2572 Technical O v erview Manual 10 3.2 Ethernet Topologies and Media - Physical Layer Ethernet Version 2 and IEEE 802.3 are fully compatible at the physical level. Therefore the formal IEEE 802.3 specification is used to describe all Ethernet media.
CTI 2572 Technical O v erview Manual 11 Although 10Base2 cabling avoids the expense of a hub, it presents a major disadvantage for large installations. Because "T" connectors are used at each tap, there are two connections to the main cable for each node.
CTI 2572 Technical O v erview Manual 12 FOIRL (Fiber Optic) Like the 10BaseT standard, the fiber optic cabling scheme uses a hub technology. Network stations are connected to the hub via point to point fiber optic connections. The fiber optic cable is attached to the network adapter using transceivers connected to the AUI port.
CTI 2572 Technical O v erview Manual 13 Mixed Media Multiple media types ma y be used on the same network. In larger installations it is very co mmon for distributed 10baseT hubs to be interconnected via a fiber optic hub.
CTI 2572 Technical O v erview Manual 14 The Ethernet Version 2 standard defines the packet as follows: Ethern et Destina tio n Ad dress Ethern et Sou rce Address Typ e Data CRC 6 bytes 6 bytes 2 bytes Vari able 4 bytes The type field is used to define the upper level protocol being used (e.
CTI 2572 Technical O v erview Manual 15 As you may notice, the Ethernet II format provides the Ethernet type information in 2 bytes while the 802.3 SNAP requires 8 bytes to provides this information. Consequently, most TCP/IP installations use the Ethernet II frame format.
.
CTI 2572 Technical O v erview Manual 17 CHAPTER 4. NETWORK PROT OCOLS 4.1 Connectionless vs. Connection Oriented Protocols In most networking discussions you will find references to connectionless and connection- oriented services. The following analogy may help you understand the features and advantages of each.
CTI 2572 Technical O v erview Manual 18 Connection-Oriented Protocols Connection-oriented protocols may be compared to a personal telephone call. Before you begin a conversation, you establish a connection by dialing a number and verifying that you are talking to the desired person.
CTI 2572 Technical O v erview Manual 19 IPX/SPX IPX (Internet Packet eXchange) and SPX (Sequenced P acket eXchange) are proprietary protocols used by Novell Netwar e. IPX is similar to Xerox’ s Internet Da tagram Protocol. IPX provides an unreliable connectionless transmission service.
.
CTI 2572 Technical O v erview Manual 21 CHAPTER 5. TCP/IP OVERVIEW 5.1 TCP/IP Components TCP/IP consists of a hierarchy of related protocols. Upper level protocols are encapsulated in the data structure of lower level protocols.
CTI 2572 Technical O v erview Manual 22 5.2 Internet Protocol Internet Protocol (IP) provides a basic packet delivery service. Technically, this service is defined as unreliable, connectionless, and best-effort. Unreliable means that delivery is not guaranteed by the protocol.
CTI 2572 Technical O v erview Manual 23 A typical IP address consists of a network ID portion and a host ID portion. The distribution of the address bytes between network ID and host ID is defined by the address class. Class A uses the first byte for the network ID and the remaining three bytes for the host ID.
CTI 2572 Technical O v erview Manual 24 the datagram may actually pass through many gateways before reaching the destination network. IP has defined a comprehensive set of rules for processing datagrams. Among these specifications are the Internet Control Message Protocol (ICMP).
CTI 2572 Technical O v erview Manual 25 UDP headers are contained in IP datagrams. Data is directed to a particular process by the use of a port number. In essence, a port is a message queue for the destination application. Certain port numbers may be universally assigned and are called well known ports.
CTI 2572 Technical O v erview Manual 26 TCP will notify both application programs. Typica lly one host computer (serve r) issues a passive open to a port, making the services available. Another host computer (client) issues an active open to initiate the connection.
CTI 2572 Technical O v erview Manual 27 5.6 Berkeley Sockets Although TCP/IP defines the network data structures and the rules for processing network traffic, it does not define exactly how appl ication software interfaces with TCP/IP protocols.
.
CTI 2572 Technical O v erview Manual 29 CHAPTER 6. PLC COMM AND INTERF ACE 6.1 Non Intelligent Terminal Protocol As discussed in previous sections of this manual, application programs communicate with the PLC by sending messages to the 2572 encapsulated in the TCP/IP protocol.
CTI 2572 Technical O v erview Manual 30 6.2 Task Codes As noted above the first word of the body of an NITP message contains a command. SIMATIC TI505 PLCs use a command structure known as task codes . Task codes are a set of numeric command codes which allow an external device to supervise and control the operation of the PLC.
Een belangrijk punt na aankoop van elk apparaat IBM CTI 2572 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen IBM CTI 2572 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens IBM CTI 2572 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding IBM CTI 2572 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over IBM CTI 2572 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van IBM CTI 2572 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de IBM CTI 2572 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met IBM CTI 2572 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
