Gebruiksaanwijzing /service van het product X.25 van de fabrikant IBM
Ga naar pagina of 70
I BM IBM ARTIC X.25 Interface Co-Processor PCI Adapter Guide to Operations.
.
IBM ARTIC X.25 Interface Co-Processor PCI Adapter Guide to Operations IBM.
Important Before using this information and the product it supports, be sure to read all the information in Appendix B, “Notices.” Before installing or removing an adapter, be sure to study the Connect/Disconnect sequence diagram for cables in “Safety Information” on page B-2.
Statement of Limited Warranty The warranties provided by IBM in this Statement of Limited Warranty apply only to Machines you originally purchase for your use, and not for resale, from IBM or your reseller. The term “Machine” means an IBM machine, its features, conversions, upgrades, elements, or accessories, or any combination of them.
If you transfer a Machine to another user, warranty service is available to that user for the remainder of the warranty period. You should give your proof of purchase and this Statement to that user. However, for Machines that have a life-time warranty, this warranty is not transferable.
THESE WARRANTIES GIVE YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM JURISDICTION TO JURISDICTION. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF EXPRESS OR IMPLIED WARRANTIES, SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU.
vi X.25 Co-Processor PCI GTO.
Contents About This Book ........................... i x Related Publications . . . . . . . . . . . . . . . . . . . . . . . . . . ix Chapter 1. Product Description . . . . . . . . . . . . . . . . . 1-1 Highlights . . . . . . . . . . . . . . . . . . . .
Removal and Replacement Procedures ............. 4-17 Co-Processor Adapter Removal ................ 4-18 Co-Processor Adapter Replacement ............. 4-20 Service Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-22 Assembly 1: PCI Co-Processor Adapter .
About This Book This manual contains the following information for the IBM ARTIC X.25 Interface Co-Processor PCI adapter (referred to as the PCI co-processor adapter throughout this book): A descr.
x X.25 Co-Processor PCI GTO.
Chapter 1. Product Description The IBM ARTIC X.25 Interface Co-Processor PCI adapter (called PCI co-processor adapter throughout this book), with supporting software, enables the attachment of a PCI-bus-compatible personal computer system to an X.25 Packet-Switched Network so the personal computer system can operate as a packet terminal.
Specifications Size Length: 181 mm (7.125 inches) Width: 17.5 mm (0.7 inches) Height: 127 mm (5.0 inches) Weight: 0.15 kg (0.33 lbs) Environment Air temperature: Operating: 10 to 35°C (50 to 95°F) Non-Operating: 0 to 60°C (32 to 140°F). Humidity: Operating: 5% through 90%.
Adapter Cable Options The following adapter cables are available as options: X.21 Cable (FRU Part Number 16F1865) The X.21 cable is 3 meters (9.9 feet) long. It has a 37-pin female connector at the adapter end and a 15-pin male connector at the other end.
1-4 X.25 Co-Processor PCI GTO.
Chapter 2. Installation This chapter lists the hardware and software/microcode requirements and provides information for setting up and installing the IBM PCI co-processor adapter. Installation Requirements The PCI co-processor adapter requires the following hardware, software, and microcode.
Handling Static-Sensitive Devices Components for your PCI co-processor adapter can be damaged by static discharges. To prevent this damage, your PCI co-processor adapter is wrapped in an antistatic bag.
Step 1: Install the PCI Co-Processor Adapter in the System Unit Use the following steps as general information for installing your PCI co-processor adapter. For specific adapter installation instructions, consult the operating manual or the installation and setup manual for your specific personal computer system.
11. Install the adapter by holding it by the top and firmly pressing it into the expansion slot. 12. Align the slot in the card-retaining bracket with the hole in the rear panel of the system unit. 13. Insert and tighten the screw to secure the card-retaining bracket to the rear panel of the system unit.
Step 2. Download the Diagnostics and Operating System Support Programs Diagnostics and support programs for various operating systems are available with the purchase of this card. Specific operating system support programs can be obtained through either the World Wide Web (WWW) or the Bulletin Board System (BBS).
3. Choose the Transfer Protocol supported by your communications software. 4. View online or download the Readme/Instruction file. 5. Follow the instructions in this file for downloading and installing the program support or diagnostics.
IBM Realtime Control Microcode (ICAAIM.COM) ICAAIM.COM is the RAM-resident control program for the PCI co-processor adapter and is supplied with the Realtime Interface Co-Processor Support Program for your operating system. ICAAIM.COM is loaded automatically onto the adapter by either the IBM X.
Step 4: Connect the Optional Adapter Cable Use the following steps to connect your adapter cable. Note: The optional adapter cables are described on page 1-3. DANGER Lightning protection. Do not connect or handle the cable during a lightning storm. 1.
Chapter 3. Connector Information Pin Numbers The 37-pin, D-shell, male connector on the PCI co-processor adapter is shown below. 1 20 19 37 The 15-pin, D-shell, male connector on the optional X.21 (non-switched) adapter cable is shown below. 8 15 1 9 The 25-pin, D-shell, male connector on the optional X.
Pin Assignments X.21 Connector Information The X.21 pin assignments for the 37-pin connector on the PCI co-processor adapter and the corresponding pin assignments for the 15-pin connector on the optional adapter cable are listed in Table 3-1. (The pin positions on the connector are shown under “Pin Numbers” on page 3-1.
X.21 bis (V.24) Connector Information The X.21 bis (V.24) pin assignments for the 37-pin connector on the PCI co-processor adapter and the corresponding pin assignments for the 25-pin connector on the optional adapter cable are listed in Table 3-2. (The pin positions on the connector are shown under “Pin Numbers” on page 3-1.
X.21 bis (V.35) Connector Information The X.21 bis (V.35) pin assignments for the 37-pin connector on the PCI co-processor adapter and the corresponding pin assignments for the 34-pin connector on the optional adapter cable are listed in Table 3-3. (The pin positions on the connector are shown under “Pin Numbers” on page 3-1.
Chapter 4. Problem Determination Procedures This chapter contains step-by-step instructions that can help you determine if your PCI co-processor adapter is operating properly in an Intel-based, IBM-compatible system.
System Unit Diagnostics For details on performing the system unit diagnostics, see “Problem Determination Procedures” in the operating instructions supplied with your computer system. The system unit diagnostics will not detect PCI co-processor adapter errors directly, but will aid in isolating the problem.
PCI Co-Processor Adapter Diagnostics Test Notes: 1. You can test the PCI co-processor adapter with or without the 37-pin wrap plug (shown in “Service Parts” on page 4-22).
1. Set the Power switch on the system unit to Off. 2. Insert your copy of the IBM Realtime Interface Co-Processor: Advanced Diagnostics diskette into diskette drive A. 3. Set the Power switch on the system unit to On. A screen similar to the following should appear.
Blank Screen, Blinking Cursor, or Non-Decipherable Data If your screen is completely blank or has a blinking cursor or non-decipherable data, do the following: 1.
à ð IBM REALTIME INTERFACE CO-PROCESSOR AND X.25 INTERFACE CO-PROCESSOR _____________________________________________________ | | | | | | | PRESENT | | STG | PWR | L | B | PORTS | ____ | CARD | SIZE.
A screen similar to the following may appear. à ð _______________________________________________________________ IBM REALTIME INTERFACE CO-PROCESSOR AND X.
à ð IBM REALTIME INTERFACE CO-PROCESSOR AND X.25 INTERFACE CO-PROCESSOR _____________________________________________________ | | | | | | | PRESENT | | STG | PWR | L | B | PORTS | ____ | CARD | SIZE.
à ð IBM REALTIME INTERFACE CO-PROCESSOR AND X.25 INTERFACE CO-PROCESSOR _____________________________________________________ | | | | | | | PRESENT | | STG | PWR | L | B | PORTS | ____ | CARD | SIZE.
If the switches are set correctly but the configuration shown on your display is wrong, replace the co-processor adapter associated with the incorrect configuration; then rerun the PCI co-processor adapter diagnostics (page 4-4). Co-Processor Adapter Test Your screen should look similar to the following.
DO YOU WANT TO TEST A CO-PROCESSOR ADAPTER SHOWN AS PRESENT ON THE DISPLAYED SCREEN? Note: A co-processor adapter is present if a “Y” appears in the second (Present) column. NO Press 9 ; then press Enter to terminate the diagnostics test. YES Type the card number (0, 1, 2, or 3—displayed in the first column) of the adapter you want to test.
FRU and Error Code Table Use the information in the following table to identify the failing FRU (field replaceable unit). Part numbers for FRUs are listed in “Service Parts” on page 4-22. Note: Without manual intervention, the diagnostics take two or three minutes to run.
Interface Test A screen similar to the following is displayed for the interface test. à ð IBM REALTIME INTERFACE CO-PROCESSOR AND X.25 INTERFACE CO-PROCESSOR ________________________________________.
DO YOU WANT TO TEST AN INTERFACE (V.24, V.35, OR X.21)? Note: You can test the PCI co-processor adapter with or without the 37-pin wrap plug (shown in “Cables and Wrap Plugs” on page 4-23). The wrap plug lets you test the electrical interfaces. NO Press 9 ; then press Enter and go to page 4-10.
à ð IBM REALTIME INTERFACE CO-PROCESSOR AND X.25 INTERFACE CO-PROCESSOR _____________________________________________________ | | | | | | | PRESENT | | STG | PWR | L | B | PORTS | ____ | CARD | SIZE.
à ð IBM REALTIME INTERFACE CO-PROCESSOR AND X.25 INTERFACE CO-PROCESSOR _____________________________________________________ | | | | | | | PRESENT | | STG | PWR | L | B | PORTS | ____ | CARD | SIZE.
3. Insert your copy of the IBM Realtime Interface Co-Processor: Advanced Diagnostic diskette into the diskette drive, if previously removed. 4. When the system is powered on (step 5), observe the yellow light emitting diode (LED) on the unrecognized co-processor adapter.
Co-Processor Adapter Removal Note: The following steps are an example of co-processor adapter removal. For specific adapter removal instructions, consult your IBM Personal Computer Hardware Maintenance and Service book or your IBM Industrial Computer Maintenance Information manual for the computer you are servicing.
8. Remove the co-processor adapter mounting screw. Problem Determination Procedures 4-19.
9. Grasp the co-processor adapter by the top corners and lift straight up. Co-Processor Adapter Replacement Note: The following steps are an example of co-processor adapter replacement.
3. Press down firmly on the co-processor adapter to seat the connector. 4. Install the co-processor adapter’s mounting screw. 5. Install the system unit’s cover.
Service Parts Assembly 1: PCI Co-Processor Adapter 1 2 Asm– Part Index Number Units Description 1–1 55H4513 1 PCI co-processor adapter with memory –2 16F1884 1 PCI co-processor adapter 37-pin Wrap Plug (P/N 07F3132) 4-22 X.
Assembly 2: Cables and Wrap Plugs Asm– Part Index Number Units Description 2–1 16F1887 1 Cable Option X.21 (P/N 07F3151) –1 16F1888 1 Cable Option V.24 (P/N 07F3161) –1 16F1889 1 Cable Option V.35 (P/N 07F3171) –2 16F1890 1 Wrap Plug X.21 (P/N 07F3153) –2 16F1891 1 Wrap Plug V.
4-24 X.25 Co-Processor PCI GTO.
Appendix A. Special Configuration Information Note: This appendix contains special configuration information for DOS and OS/2. If you are using another operating system, see “Step 2. Download the Diagnostics and Operating System Support Programs” on page 2-5.
Adding an ICAPARM.PRM File Entry for the PCI Co-Processor Adapter The only time you need to add an entry to the ICAPARM.PRM file for the PCI co-processor adapter is if you want to change the following standard hex default values. All other fields are ignored for the PCI co-processor adapter.
Example 1 — for One Co-Processor Adapter The following example shows an ICAPARM.PRM file that can be used if you have one co-processor adapter installed in your system unit: # 1 1 1 1 F E1 $ Field Number 1 2 3 4 5 6 7 8 9 1 11 Field Number Description 1 Beginning-Record Delimiter.
9 and 10 System Unit Address to call an adapter reset. Use the values shown: 0Fh, E010h. (Not supported on the PCI co-processor adapter.) 11 End-Record Delimiter. Value ';' or '$'. If this is the last adapter in the ICAPARM file, set to '$'; otherwise, set to ';'.
Changing Your CONFIG.SYS File If OS/2 and Communications Manager/2 (CM/2) are being used, one line of the CONFIG.SYS file must be modified (using a text editor) to specify the location of the ICAPARM.PRM file. Change CONFIG.SYS as follows, but substitute your specific drive paths: Change: DEVICE=C:CMLIBICARICIO.
A-6 X.25 Co-Processor PCI GTO.
Appendix B. Notices References in this publication to IBM products, programs, or services do not imply that IBM intends to make these available in all countries in which IBM operates.
Safety Information Turn Everythi ng OFF . Attach signa l cables to receptacles. First, re move po wer cord fr om outlet. T o Disconnect Note: In t he UK, by law , the power cord must be d isconnect ed afte r the teleph one line cabl e. Tur n device ON.
Notice to United Kingdom Users The United Kingdom Telecommunications Act 1984 This apparatus is approved under General Approval number NS/G/1234/J/100003 for indirect connections to public telecommunications systems in the United Kingdom.
Required Electronic Emission and Connectivity Notices Class A Federal Communications Commission Statement Federal Communications Commission (FCC) Statement Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
Industry Canada Compliance Statement This Class A digital apparatus meets the requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
Informationen in Hinsicht EMVG Paragraph 3, Abs. 2: Das Gerät erfüllt die Schutzanforderungen nach EN 50082-1 und EN 55022 Klasse A. EN 55022 Klasse A Geräte bedürfen folgender Hinweise: Nach dem .
Japan This equipment is in the 1st Class category (information equipment to be used in commercial and/or industrial areas) and conforms to the standards set by the Voluntary Control Council for Interference by Information Technology Equipment aimed at preventing radio interference in commercial and industrial areas.
Microcode Notice to Customers Microcode supplied by IBM for the ARTIC X.25 Interface Co-Processor PCI ( PCI co-processor adapter ) is protected by copyright. IBM hereby authorizes rightful possessors of the PCI co-processor adapter microcode to install copies of such microcode in PCI co-processor adapters they own or control.
Readers' Comments — We'd Like to Hear from You IBM ARTIC X.25 Interface Co-Processor PCI Adapter Guide to Operations Part Number 77H4686 Overall, how satisfied are you with the information in this book? How satisfied are you that the information in this book is: Please tell us how we can improve this book: Thank you for your responses.
NO POSTAGE NECESSARY IF MAILED IN THE UNITED STATES BUSINESS REPLY MAIL FIRST-CLASS MAIL PERMIT NO. 40 ARMONK, NEW YORK POSTAGE WILL BE PAID BY ADDRESSEE International Business Machines Corporation Pr.
.
IBM Part Number: 77H4686 Printed in U.S.A. 77H4686.
Een belangrijk punt na aankoop van elk apparaat IBM X.25 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen IBM X.25 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens IBM X.25 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding IBM X.25 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over IBM X.25 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van IBM X.25 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de IBM X.25 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met IBM X.25 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
