Gebruiksaanwijzing /service van het product DTR-9.1 van de fabrikant Integra
Ga naar pagina of 92
Contents Thank you for purchasing the AV Receiver. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new AV Receiver.
2 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
3 Precautions ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) NEC – NATIONAL ELECTRICAL CODE ELECTRIC SERVICE EQUIPMENT GROUND CLAMP ANTENNA LEAD IN WIRE S2898A 21.
4 Contents Before using Important Safeguards ....................................... 2 Precautions ......................................................... 3 Contents .............................................................. 4 Supplied accessories .
5 Contents Erasing all the comm ands progr ammed under a MODE button ............................................. 63 Using a Macro function ................................... 64 What is a Macro function? ................................. 64 Progr amming a Macro function .
6 F eatures * Manufactured under license from Dolby Laboratories. “ Dolby ” , “ Pro Logic ” and the double-D symbol are trade- marks of Dolby Laboratories. Confidential Unpublished Works. ©1992-1997 Dolby Laboratories, Inc. All rights reserved.
7 Installing the remote controller batteries 1. Remove the battery compartment cover by pressing the tab and sliding the cover. 2. Insert two AA (R6 or UM-3) batteries into the battery compartment. Carefully follow the polarity diagram (positive (+) and negative (–) symbols) inside the battery compartment.
8 Fr ont panel f acilities Display Here is an explanation of the controls and displays on the front panel of the DTR-9.1. Front door Front panel Front panel door Front panel display Off On Standby/On .
9 Front panel facilities Digital format: The current input source is set for a digital format of “ Auto. ” Bass level: The current bass level is +2.
10 Front panel facilities Memory This button only operates when FM or AM is selected as the input source. This button allows you to preset fre- quencies for stations when using the FM/AM tuner. You can preset up to 40 stations (or frequencies) to be used with the PRESET buttons.
11 Remote contr oller SEND/ LEARN indicator LCD display POWER ON/STNBY button Be aware that pressing the STNBY button only places the DTR-9.1 in standby and does not turn the power completely off.
12 DVD VIDEO 5 VIDEO 4 VIDEO 3 ZONE 2 MONITOR OUT VIDEO 1 VIDEO 2 AC OUTLETS R L R L C PRE OUT SUB WOOFER L R IR IN MAIN ZONE 2 VIDEO S VIDEO VIDEO S VIDEO INPUT 2 P B P R Y INPUT 3 P B P R Y OUTPUT P B P R Y OUT OUT IN IN IN IN IN IN FRONT SPEAKERS AC INLET CENTER SPEAKER OUT 1 2 FM ANT.
13 R L FRONT SPEAKERS CENTER SPEAKER INPUT 2 P B P R Y INPUT 3 P B P R Y OUTPUT P B P R Y IR IN MAIN ZONE 2 AC INLET AC OUTLETS AC 120V 60Hz SWITCHED TOTAL 120W 1A MAX. AC OUTLETS AC 120V 60Hz SWITCHED TOTAL 120W 1A MAX. MODEL NO. DTR-9.1 AV RECEIVER AB 12 V TRIGGER ( 6 OHMS MIN.
14 MULTI CHANNEL INPUT (Green) (Blue) (Red) (Brown) (Black) (Yellow) Tighten locking screws Front left DVD player or MPEG decoder Front right Center Surround right Surround left Subwoofer Power cord (supplied) To an AC wall outlet DTR-9.
15 VIDEO IN/OUT These are the video inputs and outputs. There are 6 video inputs and 2 video outputs and each one in- cludes both composite video and S-video configura- tions. Connect VCRs, LD players, DVD players, and other video components to the video inputs.
16 BACK L L R BACK R SURROUND ( SURR ) SPEAKERS AM ANT. FM ANT. 75 MUL TI CHANNEL IN PUT RS 232 GND C FRONT AMP IN R L SURR BACK SURR PRE OUT SUB WOOFER 1 2 MODEL NO.
17 R L IR IN AC OUTLETS AC 120V 60Hz SWITCHED TOTAL 120W 1A MAX. AC INLET FRONT SPEAKERS CENTER SPEAKER MAIN ZONE 2 A B 12 V TRIGGER ( 6 OHMS MIN. ) ( 6 OHMS MIN.
18 Example of how to connect your equipment Connecting your audio components Below is an example of how you can connect your audio components to the DTR-9.
19 Example of how to connect your equipment 9. Connecting a DVD recorder or other digital video recording device Using an RCA-type video connection cable, connect the video output terminal (composite) on the device to the VIDEO 2 IN jacks on the DTR-9.
20 Connecting speakers Speaker placement Ideal speaker placement varies depending on the size of your room and the wall coverings. Here, only typical example of speaker placement and recommenda- tions are shown.
21 IR IN AC OUTLETS AC 120V 60Hz SWITCHED TOTAL 120W 1A MAX. AC INLET AM ANT. FM ANT. 75 MUL TI CHANNEL IN PUT RS 232 GND C AMP IN R L MAIN ZONE 2 DIGIT A L OUTPUT ( COAXIAL ) AC-3 RF DIGIT A L INPUT .
22 Assembling the AM loop antenna Assemble the loop antenna as shown in the illustration. • Refer to the next page for details on connecting the AM loop antenna. Connecting the AM antenna cable 1. Press down the lever. 2. Insert the wire into the hole.
23 BACK L L R BACK R R L SURROUND ( SURR ) SPEAKERS AC INLET AM ANT. FM ANT. 75 MULTI CHANNEL INPUT RS 232 GND FRONT SPEAKERS CENTER SPEAKER VIDEO S VIDEO DVD VIDEO 5 VIDEO 4 VIDEO 3 MONITOR OUT VIDEO.
24 IR IN MAIN ZONE 2 ZONE 2 OUT BACK L L R BACK R R L SURROUND ( SURR ) SPEAKERS AC OUTLETS AC 120V 60Hz SWITCHED TOTAL 120W 1A MAX. AC INLET AM ANT. FM ANT.
25 IR IN MAIN ZONE 2 ZONE 2 OUT BACK L L R BACK R R L SURROUND ( SURR ) SPEAKERS AC OUTLETS AC 120V 60Hz SWITCHED TOTAL 120W 1A MAX. AC INLET AM ANT. FM ANT.
26 BACK L L R BACK R R L SURROUND ( SURR ) SPEAKERS AC OUTLETS AC 120V 60Hz SWITCHED TOTAL 120W 1A MAX. AC INLET AM ANT. FM ANT. 75 MULTI CHANNEL INPUT RS 232 GND FRONT SPEAKERS CENTER SPEAKER VIDEO S.
27 Off On Standby/On Power Display DVD Video 1 Video 2 Video 3 Video 4 Video 5 Tape 1 Tape 2 AM FM Phono C D Open/Close Zone 2 () GRN Rec () RED Standby Master Volume DTR-9.
28 The On-Screen Display (OSD) menu 1.Speaker Setup 1.Speaker Config 2.Speaker Distance 3.Level Calibration 4.Bass Peak Level 5.LFE Level Setup Quit:|OSD| 1 2 3 4 5 6 7 8 9 0 1 2 123456789012345678901234 2.Input Setup Input:VIDEO1 1.Digital Setup 2.Multichannel Setup 3.
29 Menu 1.Speaker Setup 2.Input Setup 3.Listening Mode Setup 4.Preference 5.Zone2 OSD Setup 6.About Select: Exit:|EXIT| Enter:|ENTER| Quit:|OSD| 1.Speaker Setup 1.Speaker Config 2.Speaker Distance 3.Level Calibration 4.Bass Peak Level 5.LFE Level Setup Quit:|OSD| 1-1.
30 1-1. Speaker Config sub-menu Here you will enter which speakers are connected and the size of each speaker. Speaker Setup 1. Speaker Setup menu After you have installed the DTR-9.
31 1-2. Speaker Distance sub-menu Here you will enter the distance from each speaker to your normal listening position (Loudspeaker Position Time Synchronization*). This is important for the timing of the acoustics to create the proper sound space that the DTR-9.
32 1-3. Level Calibration sub-menu Here you will set the volume for each speaker so that they are all heard by the listener at the same level. This is especially important for speaker layouts where the left and right speakers are at different distances or in asymmetrical positions due to room designs and configurations.
33 1-5. LFE Level Setup sub-menu This sub-menu is for setting the LFE (Low Frequency Effect) levels included in Dolby Digital, DTS, and MPEG software. The default setting is 0 decibels.
34 Input Setup Menu 1.Speaker Setup 2.Input Setup 3.Listening Mode Setup 4.Preference 5.Zone2 OSD Setup 6.About Select: Exit:|EXIT| Enter:|ENTER| Quit:|OSD| 1 2 3 4 5 6 7 8 9 0 1 2 123456789012345678901234 2.Input Setup Input:VIDEO1 1.Digital Setup 2.
35 Input Setup Auto: Select for automatic detection of the input signal format. The input signal format (Dolby Digital, DTS, MPEG, PCM or Analog) used by the selected input source is detected automatically to execute the re- quired decoding process. If no digital signal is input, the input signals to the analog input jacks will be played.
36 Input Setup 2-2. Multichannel Setup sub-menu This sub-menu will not appear if AM, FM, or PHONO is selected at the front panel for the input source. This setting is normally set to “ No, ” and o.
37 Input Setup Menu 1.Speaker Setup 2.Input Setup 3.Listening Mode Setup 4.Preference 5.Zone2 OSD Setup 6.About Select: Exit:|EXIT| Enter:|ENTER| Quit:|OSD| 1 2 3 4 5 6 7 8 9 0 1 2 123456789012345678901234 2.Input Setup Input:FM 1.Digital Setup 2.Multichannel Setup 3.
38 Input Setup Input source signals a. Analog/PCM Analog sources consist of LP records, AM and FM broadcasts, cassette tapes, and the such. PCM (Pulse Code Modulation) is one form of digital audio signals and is recorded directly onto compact discs and DVDs without compression.
39 Input Setup mode with the THX effects added as well. Select this mode when listening to movies that were encoded us- ing Dolby Pro Logic. Pro Logic Action (Dolby Pro Logic Action) When listening to.
40 Menu 1.Speaker Setup 2.Input Setup 3.Listening Mode Setup 4.Preference 5.Zone2 OSD Setup 6.About Select: Exit:|EXIT| Enter:|ENTER| Quit:|OSD| 1 2 3 4 5 6 7 8 9 0 1 2 123456789012345678901234 2.Input Setup Input:PHONO 1.Digital Setup 2.Multichannel Setup 3.
41 Menu 1.Speaker Setup 2.Input Setup 3.Listening Mode Setup 4.Preference 5.Zone2 OSD Setup 6.About Select: Exit:|EXIT| Enter:|ENTER| Quit:|OSD| 1 2 3 4 5 6 7 8 9 0 1 2 123456789012345678901234 2.Input Setup Input:VIDEO3 1.Digital Setup 2.Multichannel Setup 3.
42 Listening Mode Setup Menu 1.Speaker Setup 2.Input Setup 3.Listening Mode Setup 4.Preference 5.Zone2 OSD Setup 6.About Select: Exit:|EXIT| Enter:|ENTER| Quit:|OSD| 1 2 3 4 5 6 7 8 9 0 1 2 123456789012345678901234 3.Listening Mode Setup 1.Mono(Analog/PCM) 2.
43 Listening Mode Setup 3-7. Enhanced 7 Setup Select this to modify the Enhanced 7 listening mode. The parameters that can be set are shown in the table below.
44 Listening Mode Setup Front left speaker Front right speaker Listening angle 20 ˚ - 40 ˚ Description listening mode parameters Subwoofer Set this to “ Off ” if you are not using a subwoofer (even if one is connected). If “ No ” is selected for the Subwoofer setting in the Speaker Config sub-menu, then this set- ting will not appear.
45 Listening mode DTS Film MPEG Film +Action**/ Theater Enhance7 Orchestra/ All Ch +Musical Dimensional Unplugged/ Stereo (T-D) Studio-Mix/ TV Logic/ Parameter Mono Movie Subwoofer ●●●●●● .
46 Preference Menu 1.Speaker Setup 2.Input Setup 3.Listening Mode Setup 4.Preference 5.Zone2 OSD Setup 6.About Select: Exit:|EXIT| Enter:|ENTER| Quit:|OSD| 1 2 3 4 5 6 7 8 9 0 1 2 123456789012345678901234 4.Preference 1.Volume Setup 2.OSD Setup 3.OSD Tweak Quit:|OSD| Menu 1.
47 Preference Menu 1.Speaker Setup 2.Input Setup 3.Listening Mode Setup 4.Preference 5.Zone2 OSD Setup 6.About Select: Exit:|EXIT| Enter:|ENTER| Quit:|OSD| 1 2 3 4 5 6 7 8 9 0 1 2 123456789012345678901234 4.Preference 1.Volume Setup 2.OSD Setup 3.OSD Tweak Quit:|OSD| 1 2 3 4 5 6 7 8 9 0 1 2 123456789012345678901234 4-3.
48 About Menu 1.Speaker Setup 2.Input Setup 3.Listening Mode Setup 4.Preference 5.Zone2 OSD Setup 6.About Select: Exit:|EXIT| Enter:|ENTER| Quit:|OSD| 1 2 3 4 5 6 7 8 9 0 1 2 123456789012345678901234 6.About 1.Lock Setup 2.Version Quit:|OSD| Menu 1.Speaker Setup 2.
49 Enjo ying m usic or videos in the remote zone Ex.: When the Zone 2 button is pressed twice Ex.: When the Zone 2 button and then VIDEO 4 button are pressed Controlling the DTR-9.1 from the remote zone 1. Aiming at the remote sensor, press the POWER ON button on the remote controller.
50 Listening to Radio Br oadcasts ANALO G INPUT Tuned Band Frequency ANALO G INPUT Tuned in stereo Band Frequency Auto mode Listening to FM/AM Radio Stations One of the features of the DTR-9.1 that is most frequently used is its ability to play FM and AM broadcast radio stations.
51 CLEAR Listening to Radio Broadcasts ANALO G INPUT ANALO G INPUT ANALO G INPUT ANALO G INPUT 2. Press the Memory button on the front panel. Flash Flash Light Presetting a radio station 1. Tune into the radio station you desire (see “ Tuning into a radio station ” above).
52 Enjoying music or videos with the DTR-9.1 Though the DTR-9.1 is often used to listen to the radio, it does not show you its true ability until it is used to play music or watch videos, LDs, DVDs, and the like.
53 Enjoying music or videos with the DTR-9.1 The operation is not allowed because headphones are plugged into the DTR-9.1. The operation is not allowed because the selected in- put source is set for multichannel input. The operation is not allowed by the current speaker configuration.
54 Recording a sour ce Of course the DTR-9.1 can also be used to record an input source media. This allows you to make copies of the music or videos you like, copy them from one type of media to another, or even record what is being broadcast on television or radio.
55 Recording a source 5 VIDEO DIGITAL INPUT To record an input source signal different from that you are currently watching or listening to This method outputs to the audio and video outputs the signal from the input source that you select here.
56 Using remote contr oller Overview The RC-418M remote controller is a useful tool to help you operate the components of your home theater. To do so, first press the MODE button that corresponds to the device you wish to control. At this time, the display on the remote controller will change to show the com- ponent that is selected.
57 Using remote controller Notes: • The depth of the Late Night effect is determained by Dolby Digital software. Some sounds may pro- duce no or little effect. • The Late Night function is effective only on Dolby Digital encoded software. CH SEL: Selects a speaker for changing the speaker output level • See TEST button above.
58 Using remote controller Controlling an Integra CD player The RI connector of the Integra compact disc player must be connected to the DTR-9.1 (see page 15). 1. Press the CD MODE button. “ CD ” appears in the remote controller display. 2. Press the desired operation button.
59 Using remote controller Controlling an Integra cassette tape deck The z connector of the Integra cassette tape deck must be connected to the DTR-9.1 (see page 15). 1. Press the AUDIO/TAPE MODE button. “ AUDIO ” appears in the remote controller display.
60 Using remote controller Controlling an Integra DVD player Make sure that you point the remote controller toward the sensor on the Integra DVD player. 1. Press the DVD MODE button. “ DVD ” appears in the remote controller display. 2. Press the desired operation button.
61 Pr ogramming the commands of remote contr oller s f or other de vices into the remote contr oller 5 to 15 cm (2 to 6 inches) Buttons that cannot be programmed.
62 Programming the commands of remote controllers for other devices into the remote controller 4. Press and hold down the button (that corresponds to the command you are programming) on the remote controller of the other device until the SEND/LEARN lamp on the remote controller flashes twice and “ SAVED ” appears in the display.
63 Programming the commands of remote controllers for other devices into the remote controller Erasing the programmed command from one button You can only erase memorized commands and not preset ones. 1. Press and hold down the desired MODE button for the command, press the ENT button, and then release both buttons.
64 Using a Macr o function Programming a Macro function You can program a different macro into the MODE MACRO button for each of the eight MODE buttons. The macro is then executed by pressing the appropriate MODE button and then pressing the MODE MACRO button.
65 Using a Macro function Programming the Direct Macro function With the direct macro function, you can program a series of button operations as a macro into the DIRECT MACRO button so the macro can be executed with just one touch. Note that for the direct macro function, only one macro can be programmed.
66 OPEN/COLSE REC AUDIO MUTING DISC TRACK DVD CD PH TUN T2 T1 V1 STEREO 123 6 5 4 7 + 10 0 ENT 89 SURROUND THX D SP LEVEL + CH SEL Re-EQ LEVEL – DIMMER LATE NIGHT DIRECT DS P V2 V3 V – MODE MACRO MODE buttons HOME THEATER CONTROLLER RC-418M Using a Macro function Erasing a macro from the MODE MACRO button 1.
67 Using a Macro function Erasing all commands and macros that have been programmed This procedure will erase all the commands and macros that you have programmed into the remote controller and return it to its default settings. This operation will not affect the preset settings of the remote controller.
68 T r oubleshooting guide If a problem occurs while you are using the remote controller, first try to operate the controls on the front panel of the DTR-9.1 to make sure that it is not due to a malfunction (or worn out batteries) in the remote controller.
69 VIDEO and AUDIO Desired picture does not appear. • Improper connection. ➞ Check the connection again. Insert the plugs and connectors completely. • Video Setup sub-menu of Input Setup menu settings are incorrect. ➞ Check Settings. No on-screen display.
70 Troubleshooting guide For digital sources, sound is sometimes not output depending on media type. • Format of digital input source is fixed. Other digital formats will not be output. ➞ Set Digital Format to “ Auto ” in the Digital Setup sub-menu of the Input Setup menu.
71 The default settings The following table shows the factory-set default pa- rameter values. Use it as a reference when you change these parameter values as needed, although they are usable in many cases. To return to the factory-set default parameters, press and hold down the VIDEO 1 button, and then press the STANDBY/ON button.
72 VIDEO 2 Name: Digital Input: OPT1, OPT2, OPT3, COAX1, COAX2, COAX3, COAX4, COAX5, not connected Multichannel Setup: Yes, No Video Input Video: DVD, VIDEO1, VIDEO2, VIDEO3, VIDEO4, VIDEO5, not conne.
73 Your system setting VIDEO 4 Name: Digital Input: OPT1, OPT2, OPT3, COAX1, COAX2, COAX3, COAX4, COAX5, not connected Multichannel Setup: Yes, No Video Input Video: DVD, VIDEO1, VIDEO2, VIDEO3, VIDEO.
74 Your system setting CD Name: Digital Input: OPT1, OPT2, OPT3, COAX1, COAX2, COAX3, COAX4, COAX5, not connected Multichannel Setup: Yes, No Video Setup: DVD, VIDEO1, VIDEO2, VIDEO3, VIDEO4, VIDEO5, ---- Intelli Volume: __________dB Character Input: Yes (name: ___________) , No Listening Mode Preset 1.
75 Your system setting Remote controller It is recommended to write down the settings of the remote controller in case they are lost accidentally. In the blank spaces for each setting, place a checkmark for the settings you have made.
Printed in Japan D0004-1 E Integra Division of ONKYO U.S.A. CORPORATION 200 Williams Drive, Ramesy, N.J. 07446, U.S.A. Tel: 201-825-7950 Fax: 201-825-8150 E-mail: integra@onkyousa.com Integra Division of ONKYO CORPORATION Sales & Product Planning Div.
Instruction Manual for upgraded unit Thank you for using our products. The upgraded unit now supports the newest decoders and sound formats below as well as conventional sound formats including Dolby Digital, DTS, and THX Surround EX. With your new AV amplifier, you can enjoy movies and music to their absolute fullest.
Upgraded- 2 F ea tur es ■ THX Ultra2 The new THX Ultra2 standard from Lucasfilm ensures the highest sound and picture quality and the most reliable operation. The THX Ultra2 adds the THX Ultra2 Cinema mode and THX MusicMode to the conventional THX Cinema mode to create the optimum sound space for both music and movies.
Upgraded- 3 Most dipoles have an arrow on them to indicate their orientation towards the screen. So for the side dipoles, the arrows point forward. For the back dipoles, the arrows should point towards each other to achieve the correct acoustical phasing in the room.
Upgraded- 4 Speak er Setup Menu 1.Speaker Setup 2.Input Setup 3.Listening Mode Setup 4.Preference 5.Zone2 OSD Setup 6.About Select: Exit:|EXIT| Enter:|ENTER| Quit:|OSD| 1.Speaker Setup 1.Speaker Config 2.Speaker Distance 3.Level Calibration 4.Bass Peak Level 5.
Upgraded- 5 Speaker Setup Menu 1.Speaker Setup 2.Input Setup 3.Listening Mode Setup 4.Preference 5.Zone2 OSD Setup 6.About Select: Exit:|EXIT| Enter:|ENTER| Quit:|OSD| 1.Speaker Setup 1.Speaker Config 2.Speaker Distance 3.Level Calibration 4.Bass Peak Level 5.
Upgraded- 6 Menu 1.Speaker Setup 2.Input Setup 3.Listening Mode Setup 4.Preference 5.Zone2 OSD Setup 6.About Select: Exit:|EXIT| Enter:|ENTER| Quit:|OSD| 1 2 3 4 5 6 7 8 9 0 1 2 123456789012345678901234 2.Input Setup Input:FM 1.Digital Setup 2.Multichannel Setup 3.
Upgraded- 7 Input Setup Relationship between input source and listening mode Listening modes marked with the “ ● ” can be selected. For columns that list a number of listening modes, the display will correspond to the format of the signal from the source media.
Upgraded- 8 Listening Modes Mono This mode is for playing old movies whose sound is recorded in monaural or playing left and right channels separately in the movies which contains the different language signals recorded into individual channels.
Upgraded- 9 THX This mode is for playing back sources using THX. For excellent fidelity when playing back THX sounds, it is recommended to use a THX-certified speaker system.
Upgraded- 10 Currently selected listening mode Menu 1.Speaker Setup 2.Input Setup 3.Listening Mode Setup 4.Preference 5.Zone2 OSD Setup 6.About Select: Exit:|EXIT| Enter:|ENTER| Quit:|OSD| 1 2 3 4 5 6 7 8 9 0 1 2 123456789012345678901234 3.Listening Mode Setup 1.
Upgraded- 11 3-6. Surround (Digital) Setup Select this to modify the Dolby D, DTS, MPEG Multi and Pro Logic Ⅱ listening modes when the current source is digital.
Upgraded- 12 Listening Mode Setup Description listening mode parameters Subwoofer Set this to “ Off ” if you are not using a subwoofer (even if one is connected). If “ No ” is selected for the Subwoofer setting in the Speaker Config sub-menu, then this setting will not appear.
Upgraded- 13 Listening Mode Setup Neo:6 Music Center Image DTS Neo:6 derives a center channel from two-channel PCM and analog sources. In cinema mode, for Lt/Rt film soundtracks, sounds steered to the center are subtracted from the left and right channels.
Upgraded- 14 Listening angle The listening angle is the angle subtended by the front left and right speakers as seen from the listener. The setting of 20 and 40 degrees are only for nominal purposes, so select the setting that is closest to your actual listening angle.
Upgraded- 15 Listening mode THX Mono Movie Enhanced 7 Orchestra/ All Ch PL Ⅱ THX Unplugged/ Stereo Studio-Mix/ TV Logic/ Parameter Subwoofer ●●●●● Re-EQ (/Academy) ●●●●● Input Ch.
SN 29343353 D0203-1 ONKYO CORPORATION Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8111 Fax: 072-833-5222 ONKYO U.S.A. CORPORATION 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 201-785-2600 Fax: 201-785-2650 E-mail: onkyo@onkyousa.
Een belangrijk punt na aankoop van elk apparaat Integra DTR-9.1 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Integra DTR-9.1 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Integra DTR-9.1 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Integra DTR-9.1 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Integra DTR-9.1 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Integra DTR-9.1 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Integra DTR-9.1 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Integra DTR-9.1 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
