Gebruiksaanwijzing /service van het product EE110EM van de fabrikant Intel
Ga naar pagina of 21
Intel Express 10/100 Stackable Hub Fiber and Ethernet Modules User Guide.
Copyright © 1997, Intel Corporation. All rights reserved. Intel Corporation, 5200 NE Elam Young Parkway, Hillsboro OR 97124-6497 Intel Corporation assumes no responsibility for errors or omissions in this manual. Nor does Intel make any commitment to update the information contained herein.
1 Xmt Link Rcv Coll 1. Turn off the power, then unscrew and remove the panel from an expansion slot on the Express 10/100 Stackable Hub. 2. Plug either the Ethernet Module or the Fiber Module into a slot, using the retaining screws to secure the module to the hub.
3 Contents Overview .................................................................................................................................................. 3 Ethernet Module ..................................................................
4 Ethernet Module The Ethernet Module acts as a switch port plugged into an Express 10/100 Stackable Hub. The Ethernet Module • bridges Express 10/100 Stackable Hubs running at 10 Mbps to hubs running at 100 Mbps. • connects Express10/100 Stackable Hubs running at 100 Mbps to each other with TPE cable (creating separate collisions domains).
5 Example configurations These two example configurations show the combinations of duplex and speed LEDs. Bridging hubs running at 100 Mbps to hubs at 10 Mbps This Ethernet Module is plugged into a hub running at 100 Mbps. The module is then connected to a 10 Mbps hub by CAT 3, 4, or 5 TPE cable.
6 Connecting 100 Mbps hubs with TPE cab le Class I hubs, such as the Intel Express 10/100 Stackable Hub, cannot be directly connected with TPE cable when running at 100 Mbps. However, since the Ethernet Module acts as a switched port on a hub, you can use it to connect to another 100 Mbps hub with TPE cable.
7 NOTE A long press is held for 2 seconds or more. A short press is held for less than 2 seconds. Connecting to a de vice at full-duple x Express 10/100 Stackable Hubs operate at half-duplex. The only way to connect to a device at full-duplex is with an Ethernet Module.
8 Connecting to a server at full-duplex This is an Ethernet Module plugged into a hub running at 10 or 100 Mbps. The module is then connected to a server with an Intel EtherExpress™ PRO/100 LAN Adapter using CAT 5 TPE cable. Use the MDI-X connector on the Ethernet Module.
9 Under standing Ethernet Module LEDs The LEDs on the Ethernet Module provide information about the module’s configuration and status. Port LEDs The LEDs above a port on the Ethernet Module provide information about the port’s configuration and status.
10 Change duplex button and LEDs You can determine the Ethernet Module’s duplex configuration and status from the duplex LEDs. Use the Change duplex button to cycle among duplex modes. Attach any Express 10/100 Stackable Hub to the Ethernet Module and the module will automatically negotiate the correct duplex setting (always half-duplex).
11 Change speed button and LEDs You can determine the speed of the connection between the Ethernet Module and device from the speed LEDs. Use the Change speed button to cycle among speed settings. Attach any Express 10/100 Stackable Hub to the Ethernet Module and the module will automatically negotiate the correct speed.
12 NOTE At half-duplex, you can con- nect hubs up to 160 meters apart. At full-duplex, you can con- nect hubs up to 2 km apart. Fiber Module The Fiber Module acts as a switched port plugged into an Express 10/100 Stackable Hub.
13 NOTE A long press is held for 2 seconds or more. A short press is held for less than 2 seconds. Connecting to a de vice at full-duple x Not all device manufacturers implement auto-negotiation of duplex mode. To ensure the Fiber Module connects to the device at full- duplex, force the duplex mode to full-duplex.
14 Connecting to a switch at full-duplex Fiber Module Auto-negotiate Full-duplex Half-duplex Change duplex Xmt Link Rcv Coll TX RX This is a Fiber Module plugged into a hub running at either 10 or 100 Mbps. The module is then connected to an Intel Express 10/100 Fast Ethernet Switch at full-duplex using 62.
15 Under standing Fiber Module LEDs The LEDs on the Fiber Module provide information about the module’s configuration and status. Duplex LEDs You can determine the Fiber Module’s duplex configuration and status from the duplex LEDs. Use the Change duplex button to cycle among duplex modes.
16 Transmit/Receive/Link/Collision LEDs LED Status Meaning Xmt (transmit) Blinking green Port is transmitting data. Off Port is not transmitting data. Rcv (receive) Blinking green Port is receiving data. Off Port is not receiving data. Link Solid green Port has a link.
17 Limited Hardware Warranty Intel warrants to the original owner that the hardware product delivered in this package will be free from defects in material and workmanship for three (3) years followin.
18 Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
19 WARNUNG Das System wurde für den Betrieb in einer normalen Büroumgebung entwickelt. Der entwickelt. Der Standort sollte: · sauber und staubfrei sein (Hausstaub ausgenommen); · gut gelüftet und.
20 World Wide Web & Internet FTP Intel BBS Access Intel’s World Wide Web home page Use Intel’s Bulletin Board. Dial in by or download information using modem at 8-N-1, and up to 14.
Een belangrijk punt na aankoop van elk apparaat Intel EE110EM (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Intel EE110EM heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Intel EE110EM vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Intel EE110EM leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Intel EE110EM krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Intel EE110EM bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Intel EE110EM kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Intel EE110EM . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
