Gebruiksaanwijzing /service van het product M-121704 van de fabrikant Jet Tools
Ga naar pagina of 24
Operating Instructions and Parts Manual SMH Series Hand Chain Hoists With and Without Overload Protection WMH TOOL GROUP 2420 Vantage Drive Elgin, Illinois 60124 Part No.
2 Warranty and Service WMH Tool Group, Inc. warrants every product it s ells. If one of our tools needs service or repair , one of our Authorized Service Centers lo cated throughout the United States can giv e you qu ick service.
3 Table of Contents Warranty and Service ........................................................................................................... ......................... 2 Table of Contents ........................................................
4 Warning 1. Read and understand this entire manual bef ore attempting assembly or operation. 2. Read and understand the warning s posted on the hoist and in this manual. Failure to comply with all of these warnings may cause serious injury. 3. Replace the warning labels if they become obscu red or removed.
5 blahblahblah 26. Do not force a tool o r attachment to do a job for which it was not designe d. The right tool will do the job better and safer. 27. Use recommended accessories; improper accesso ries may be hazardous. 28. Maintain tools with care. Follow instructions for lubricating the hoist and cha nging accessories.
6 Introduction This manual is provided by WMH Tool Grou p covering the safe operation and maintena nce procedures for a JET Model SM H Series Chain Hoi st. This manual contains instructions on installation, safety precautions, general operating procedures, mainte nance instructio ns and parts breakd own.
7 Using the Chain Hoist Prior to Operation 1. Support for the hoi st may be hook, clevis pin, trolley, or beam clamp. Whatever method of suspension is chosen, the sup port components must be rated equal to, or greater t han the capacity of the chain hoist.
8 Hooking the Load 1. Secure the upper hook. 2. Place the bottom hoo k securely into the object to be lifted. 3. Place ropes or chain in the center of the bottom hook, making sure the safety latch is secure. Never load the hook in front of the safety latch.
9 Hand Chain – Cutting and Installing To cut the hand chain in order to increa se or shorten: 1. Insert one link lengthwise into the vise (Figure 6). Be sure that the side opposite the weld lies completely below the surface of the vise ja w (about 1/3 of a link).
10 Load Chain and Bottom Hook Load Chain Inspection (all models) Over time, the load chain will wear or elongate. This can cause da mage to the hoist, breakage, or non-engagement of the load sheave. Do not operate the hoi st with a twisted, kinked or damaged load chain.
11 Load Chain and Bottom Hook Installation The following procedure assumes that the load chain has been attached t o the chain anchor and fed through the load chain sprocket as described in the previous section. This section completes t he load chain and bottom hook installation.
12 Chain Installation – 10-Ton Hoists Referring to Figure 14: 1. After installing the load chain into the load chain sprocket (B), run the remaining chain through your hand to remove any twist. The last link of the chain must be in the same direction as the first.
13 Inspection and Maintenance Read and follow ANSI Inspec tion and Maintenance Instructions. Know the meaning of Frequent Inspectio n, Periodic Inspection, Normal Service, Heavy Service, and Severe Service. It is the customer’s responsibility to understand and follow all ANSI and JET inspection and maintenance instru ctions.
14 Load Limits Load Chain Capacity 5 Links Normal 5 Links Limit 1/2 ton 2.95" 3.02" 1 ton 3.74” 3.83" 1-1/2 ton 4.13" 4.23" 2 ton 4.72” 4.84" 3 ton 4.13” 4.23" 5 ton 5.31” 5.44" 10 ton 5.31" 5.44" Table 1 Carefully inspect the entire load chain.
15 Parts SMH Chain Hoist.
16 Parts List: 1/2-Ton SMH Chain Hoist Index No. Part No. Description Size Qty 001 ........... SMH-001A ............... T op Hook Assy ..................................................... ........................ ............ 1 002 ........... SMH-002A .
17 Parts List: 1-Ton SMH Chain Hoist Index No. Part No. Description Size Qty 001 ........... SMH-001B ............... Top Hook Assembly ............................................. ............................ ........ 1 002 ........... SMH-002B ....
18 Parts List: 1-1/2 Ton SMH Chain Hoist Index No. Part No. Description Size Qty 001 ........... SMH-001C ............... Top Hook Assy. .................................................... ........................ ............ 1 002 ........... SMH-002C .
19 Parts List: 2-Ton SMH Chain Hoist Index No. Part No. Description Size Qty 001 ........... SMH-001D ............... Top Hook Assembly ............................................. ............................ ........ 1 002 ........... SMH-002D ....
20 Parts List: 3-Ton SMH Chain Hoist Index No. Part No. Description Size Qty 001 ........... SMH-001E ............... Top Hook Assembly, Complete ........................... .................................... 1 002 ........... SMH-002E .............
21 Parts List: 5-Ton SMH Chain Hoist Index No. Part No. Description Size Qty 001 ........... SMH-001F ................ Top Hook Assembly, Complete ........................... ................................... .1 002 ........... SMH-002F ............
22 Parts List: 10-Ton SMH Chain Hoist Index No. Part No. Description Size Qty 001 ........... SMH-001G ............... Top Hook Assy Complete .................................... ................................ .... 1 002 ........... SMH-002F .......
23 Notes.
24 COMMODITY MODEL SERIAL NO. CAPACITY TEST LOAD DATE OF INSPECTION JUDGEMENT INSPECTOR Chain Hoist SMHX- ________Ton ________Ton P A S S E D LIFT ________ ft.
Een belangrijk punt na aankoop van elk apparaat Jet Tools M-121704 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Jet Tools M-121704 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Jet Tools M-121704 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Jet Tools M-121704 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Jet Tools M-121704 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Jet Tools M-121704 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Jet Tools M-121704 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Jet Tools M-121704 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
