Gebruiksaanwijzing /service van het product KS-PD100 van de fabrikant JVC
Ga naar pagina of 32
INTERFACE ADAPTER for iPod R KS-PD100 • iP od is a trademark of A p ple Com puter , Inc., r egistered in the U .S. and o ther countries. • Fo r installatio n and connectio ns, ref er to the separa te man ual. Thank you for purchasing a JVC product.
2 INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
3 Getting started General information • This adapter supports only JVC’s car receivers which meet the following conditions: – An MP3-compatible CD changer control is equipped – CD Text, MP3 fo.
4 Setting your receiver Before using the iPod through this adapter, make sure to select CD change r as the external inp ut settin g. • For details, see the PSM setting section in the instructions supplied with your receiver. Connecting the iPod to the adapter Connect the iPod connection cable to the dock connector on the iPod.
5 Checking the type of your receiver Operating procedures on the control panel and from the remote controller are different according to the type of the receiver. Check the type of your receiver by referring to the chart below. • If you are not sure about the type of your receiver, see the JVC web site <http://www.
6 Operations from the control panel—For Type A How the buttons on the control panel work as the iPod’s controls • : functions after MODE is pressed. To restore the original function, press MODE again. Selecting playback modes * 3 Repeat play * 4 : After pressing MODE , press 5 repeatedly to select a desired repeat mode.
7 Operations from the control panel—For Type B How the buttons on the control panel work as the iPod’s controls • : functions after MODE is pressed. To restore the original function, press MODE again. Selecting playback modes * 3 Repeat play * 4 : After pressing MODE , press 5 repeatedly to select a desired repeat mode.
8 Operations from the control panel—For Type C How the buttons on the control panel work as the iPod’s controls • : functions when you press and hold the button.
9 Operations from the control panel —For Type D (KD-NX901) How the buttons on the control panel work as the iPod’s controls • : functions after OK is pressed. To restore the original function, press OK again. • : functions when you press and hold the button.
10 How the buttons on the control panel work as the iPod’s controls • : functions after OK is pressed. To restore the original function, press OK again. • : functions when you press and hold the button. When selecting a track from the “Music” menu (See also page 11.
11 Selecting playback modes * 2 Repeat play * 3 : After pressing MODE , press 2 repeatedly to select a desired repeat mode. • Track: Functions same as “Repeat One” of the iPod. • Disc: Functions same as “Repeat All” of the iPod. To cancel, press MODE , then press 6 .
12 Operations from the remote controller • From the remote controller, playback mode selection is not available. Perform the operation on the control panel to select a playback mode. You can control the iPod using the remote controller supplied with your receiver.
13 Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Causes Remedies • The iPod is not turned on. Connections are incorrect. Check the connecting cable and its connection.
14 Specifications GENERAL Power Requirement: Operating Voltage: DC 14.4 V (11 V to 16 V allowance) Grounding System: Negative ground Current consumption: 18 mA (200 mA while charging the iPod) Allowab.
© 2005 Victor Company of Japan, Limited EN.
D. PLAYER INTERFACE ADAPTER KS-PD500 • Fo r installatio n and connectio ns, ref er to the separa te man ual. Thank you for purchasing a JVC product. Please read this manual carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit.
2 INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
3 Getting started General information • This adapter supports only JVC’s car receivers which meet the following conditions: – An MP3-compatible CD changer control is equipped – CD Text, MP3 folder/file names, or ID3 Tag is displayed • By using this adapter, you can operate the D.
4 Connectable D. player • You can control the D. player with the cradle connector through this adapter. For XA-HD500 (firmware version 1.00.0947) users: Before connecting the D. player to this adapter, update the firmware version of your D. player. Refer to “Update manual” for details about updating.
5 Checking the type of your receiver Operating procedures on the control panel and from the remote controller are different according to the type of the receiver. Check the type of your receiver by referring to the chart below. • If you are not sure about the type of your receiver, see the JVC web site <http://www.
6 Operations from the control panel—For Type A How the buttons on the control panel work as the D. player’s controls • : functions after MODE is pressed. To restore the original function, press MODE again. Selecting playback modes * 3 Repeat play * 4 : After pressing MODE , press 5 repeatedly to select a desired repeat mode.
7 Operations from the control panel—For Type B How the buttons on the control panel work as the D. player’s controls • : functions after MODE is pressed. To restore the original function, press MODE again. Selecting playback modes * 3 Repeat play * 4 : After pressing MODE , press 5 repeatedly to select a desired repeat mode.
8 Operations from the control panel—For Type C How the buttons on the control panel work as the D. player’s controls • : functions when you press and hold the button.
9 Operations from the control panel —For Type D (KD-NX901) How the buttons on the control panel work as the D. player’s controls • : functions after OK is pressed. To restore the original function, press OK again. • : functions when you press and hold the button.
10 How the buttons on the control panel work as the D. player’s controls • : functions after OK is pressed. To restore the original function, press OK again. • : functions when you press and hold the button. When selecting a track from the Top Menu (See also page 11.
11 Selecting playback modes * 2 Repeat play * 3 : After pressing MODE , press 2 repeatedly to select a desired repeat mode. • Track: Functions the same as “Repeat Mode One” of the D. player. • Disc: Functions the same as “Repeat Mode All” of the D.
12 (Enters the Top Menu) * 37 37 (Play/Stop) * (Moves back to the previous layer) * ENTER ENTER (Confirms the selection) * 5 5 (Selects the previous items) Skips previous 10 items ∞ ∞ (Selects the.
13 Selecting playback modes * 2 • Refer to the operation of playback modes section of the instructions supplied with the receiver. Repeat play * 3 : Select one of the followings: • Track: Functions the same as “Repeat Mode One” of the D. player.
14 Operations from the remote controller • From the remote controller, playback mode selection is not available. Perform the operation on the control panel to select a playback mode. You can control the D. player using the remote controller supplied with your receiver.
15 Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Causes Remedies • The D. player does not turn on, or does not work. Firmware version needs to be updated. Update the firmware version of your D.
16 Specifications GENERAL Power Requirement: Operating Voltage: DC 14.4 V (11 V to 16 V allowance) Grounding System: Negative ground Current consumption: 18 mA (400 mA while charging the D.
© 2005 Victor Company of Japan, Limited EN.
Een belangrijk punt na aankoop van elk apparaat JVC KS-PD100 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen JVC KS-PD100 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens JVC KS-PD100 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding JVC KS-PD100 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over JVC KS-PD100 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van JVC KS-PD100 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de JVC KS-PD100 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met JVC KS-PD100 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
