Gebruiksaanwijzing /service van het product TS-990S van de fabrikant Kenwood
Ga naar pagina of 34
TS-990S KENWOOD NETWORK COMMAND SYSTEM Setting Manual © March/29/2013.
1 CONTENTS 1. Relevant Models .......................................................................................................... 2 2. Objectives of this document .................................................................................
2 1. Relevant Models This operations guide is for the TS - 990S. Using the TS - 990S and the KENWOO D NE TWORK COMMAND SY S TEM (hereinafter called "KNS") enables transcei ver ope rations by remot e c ontrol using a home LAN or t he internet.
3 2. Objectives of this document T o supply informat ion to configure a r e mote control s ystem via a home LAN or int ernet using the TS - 990S, ARCP - 990, ARHP - 990 and V oIP Program.
4 3. Outline 3.1. Overall Configur ation 図： 3.1.1 家庭内 LAN の構成例 （この図ではモデム、ブロードバンド・ルーター、ハブ等は省略してあります。） Fig. Example of a hom e LA N c onfiguration (In this diagr a m, the modem, r out er , and hub have b ee n omitted.
5 Fig. Example of a K NS configuration via the i nt ernet The host station and remote station can be installed in any loc ation with a home LA N connection or int ernet connection.
6 3.2. Outline of Hos t S tation (T ransmit ter) Operations The host station is configured usi ng a transceiver and a P C c onnected to the network. Data signals that control the t rans ceiver are conne c ted to the PC using eit her LAN, USB or RS - 232C.
7 PC S pecificat ions CPU and memory: Minimum values rec ommended by the operat i ng system. HDD: T o install both the ARHP - 990 and the V oIP Program, a minimum of approx. 100 MB of f ree dis k s pace is required. If you are saving connec t ion logs, additi onal m emory space is required.
8 Firewall T o implement K NS operations via the int ernet , firewall environments configured us ing in - house com pany networks cannot be us ed. Use a home LAN envir onment.
9 3.4. Outline of Rem ote S tation (Operator) Operatio ns The remote station is configured us ing a PC connect ed to the network, and a m icrophone and speaker connec ted to the PC sound f unc tion.
10 Run - time Same as host station. ARCP - 990 This software remotely cont rol s the transceivers . Refer to the software help for the sett i ngs and operation methods . Download the software f rom t he K ENWOOD website, and install it onto the PC. http://www .
11 4. Settings 4.1. Connecting a Comm unications Cable Connect the host stat ion PC and TS - 990S using a USB c able or RS - 232C cable. There is also a way to connect both t he t ransceiver and PC t o the home LAN. This method makes high - speed data communic at ion with the transcei ver via USB or RS - 232 C cable.
12 Connect the PC sound f unc tions and audio cabl e with reference t o the following diagra m. Reference: If th e TS - 990S is connected to the P C usi ng a US B cable, audio transm i s sion input and output are poss i bl e using the USB audio f unction, but the many s ignal conversions c ause inherently unavoid able delays.
13 4.3. T ransceiver Sett ings Perform the require d s ettings to implement K NS operations using trans c eivers. ● Set the trans mitting audio input path settings With KNS operations , normally trans mitted audio is i nput from an ACC2 connect or .
14 ● Audio I/O l evel settings Use the following m enu t o adjust audio trans m i ssion input levels f rom the PC, and receive audio out put levels to the P C.
15 ● T imeout timer set tings During KNS operat ions, control data signals are t ra nsmitted us ing the network. Consequently , if normal network oper ations are disabl ed f or any reason, c ont rol of the transceiver will al so be disabled.
16 4.4. Setting T ransmission Methods for Audio I nput to the ACC2 Connector The PTT of the microphone connected t o t he TS - 990S, and the [SEND] key on the TS - 990S control panel, are the method s for transmitting audi o i nput from the mic rophone connected to the TS - 990S .
17 ● T ransmittin g using the PF keys alloca ted to the DA T A SEN D funct i on If the DA T A SEND function has been alloc ated to a PF key , operating the PF key enables audio input f rom the ACC2 connector to be t ransmitted. For details, refer to "All ocat i ng DA T A SEND Function to PF Keys".
18 4.5. Setting a Broadb and Route r When implementi ng KNS operations vi a t he internet, it is neces sary to set the broadba nd router connec ted to the host station. Perform the set t ings to transmit c ont rol data signals and audio transmis sions via the internet from the broadb and router to the hos t station PC.
19 4.6. Software Installation and Sett i ngs Install the software required for KNS operat ions on the host station PC and the remote station PC, then perform the requi r ed settings . ● Host station PC Download and ins tall the ARHP - 990 onto the PC from the K ENWOOD website: http://www .
20 ● Remote station PC Download and ins tall the ARCP - 990 onto the PC from the K ENWOOD website: http://www .kenwood. com/i/products/inf o/amateur/software_dow nload.
21 4.7. Windows F i rewall Settings With the host station PC, recei vi ng c onnections f rom networks and the inter net using the ARHP - 990 and A RV P - 10 are blocked by the Wi ndows firewall. When blocked, KNS operations are dis abled, so remove the bl ock.
22 5. Limitations Caution! 5.1. PC Environment Li m itations Check that the ARCP - 99 0, ARHP - 990 and ARVP - 10 operati ons use Windows XP SP3 or later , Windows Vista SP1 or later , or Windows 7 RTM or later . Earlier versions, and ot her operating syst ems, cannot be used.
23 5.3. Program Lim itations CW operations are pos sible, but keying us ing normal e - keys i s not possible. S t rings entered using the k eyboard are collate d for transmit operations .
24 6. Frequently Ask ed Quest ions This section introduc es questions that have been ask ed t o date, and subjects verified by JVC KENW OOD Corporation.
25 Question Answer Installation I want to use a USB heads et or Bluetooth heads et on the remote station PC. Will there be any problems? Y ou can use them, but in princ iple, a USB headset or B luetooth headset has unavoidable del a ys, so entering standby will take considerable time.
26 Question Answer Internet Cannot operate t he t ransceiver via the internet. Cannot connect t o the host station. Check that connect ions to websites and your internet mail server are s till possible. Check the host statio n I P address, ID, and password.
27 Question Answer Operations Why can't I use the ARCP - 480 or ARCP - 590? The ARCP - 480 is f or the TS - 480 only . The ARCP - 590 is f or the TS - 590 only . Use the ARCP - 990 wit h the TS - 990S. Why can't I use the ARHP - 10 or ARHP - 590? The ARHP - 10 is f or the TS - 480 only .
28 Question Answer O perations Cannot hear the rec ei ved transceiver audi o f rom the speaker of the PC at the remote station. Audio output l evel f rom the TS - 990S may be too low . Refer to "Audio I/O level settings" i n "4.3. T ransceiver Settings " of this document, and adjust eac h output level.
29 Question Answer Operations If there is a connection re quest from the remote station while the hos t station is not being used, a message is displ ayed and connections t o the host station are disabled.
30 Question Answer Operations The audio transmi ssion keeps varying in volume and i s not constant. Has the AGC been turned ON us ing the V oIP software input audio settings? For details, refer to the V oIP software user manual, and c heck the settings .
31 Question Answer Other After implementing KNS oper ations on the PC used as the hos t station, the sound has vanis hed from the PC during audio and vid e o playback on the P C. It is possible t hat the device connect ed to t he TS - 990S has been sel ected as the default device us ing the Windows sound settings .
32 (Supplement): F AQ: E xplaining the Internet "Ca nn ot operate trans c eiver" Modem Broadband Router Internet Fig. 1 As shown in Fig. 1, even t houg h only one broadban d router (BBR) is vis ible on the network, in reality there are t wo.
33 Caution: Change any sett i ngs such as open BBR ports at your own risk. If you do not have confide nce in the setti ngs , we recommend you stop us ing the system.
Een belangrijk punt na aankoop van elk apparaat Kenwood TS-990S (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Kenwood TS-990S heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Kenwood TS-990S vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Kenwood TS-990S leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Kenwood TS-990S krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Kenwood TS-990S bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Kenwood TS-990S kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Kenwood TS-990S . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
