Gebruiksaanwijzing /service van het product XM-100 van de fabrikant Antex electronic
Ga naar pagina of 26
XM - 100 Commercial XM Satellite Radio Owner’s Manual.
Welcome! .................................................................................. 5 Installing XM - 100 ...................................................................... 5 ? Parts List ...................................................
www.antex.com Copyright © 2005 Antex Electronics Corporation. All Rights Reserved. No portion of this manual may be reproduced without prior written consent from Antex Electronics.
or circuits as contact with them might be fatal. ? Overloading – Do not overload wall outlets, extension cords, or integral convenience receptacles a s this can result in a risk of fire or electrical shock.
Thank you for choosing the world’s finest high - fidelity, commercial XM satellite radio receiver. There’s a world beyond AM and FM. XM Satellite Radio. Over 150 channels of music, news, sports, comedy, talk, and entertainment. Coast - to - coast coverage.
Be fore installing your XM - 100, make sure you have all the parts listed below: ? XM - 100 unit ? Antenna ? Remote control ? Power Adapter ? RCA audio cable Connections House the XM - 100 unit in a component rack or other suitable location that provides adequate ventilatio n.
3. Antenna – connect the included XM antenna to the small gold jack and position as described in the next section. The antenna comes with 20 feet of cable. If that is not sufficient to locate the antenna where there is a strong XM signal, purchase a 50 - foot cable extension kit.
b) Turn the base of the antenna so that the XM logo is facing to the south if you are in the eastern half of the U.S. and to the south/southeast if you are in the western half of the U.S. c) Bring up the signal strength menu by holding down the power button for 4 seconds and optimize signal strength using the instructions in the next section.
5. Activate the unit following the “Activating XM - 100” in structions. Optimizing Signal Strength For robust operation, signal strength received from the antenna must be optimized. Optimum alignment of the antenna may be achieved using the signal strength menu.
After the channel 1 audio verification test, you must activate your XM - 100 to access all XM channels. Commercial accounts must sign up for and activate under the terms of XM’s Commercial Service. To activate the radio you must first obtain the XM Radio ID number of your unit.
The default display, as shown below, provides information about the channel currently tuned to, including channel number and channel name on the first line and scrolling artist name and song title on the second line. The display backlight is illuminated and text appears after the power button has been pressed, indicating the unit is on.
The XM - 100 supports three Modes of channel selection: Channel (default), Category and Category/Channel. Examples of categories are Rock, Classical, etc. Channel Mod e allows you to scroll through and select any channel in the entire XM lineup regardless of what category the channel belongs to.
When preset channels have been set, you can access those presets simply by pressing the PRESET button on the remote, then an appropriate numeric button. For example, if preset 0 were set to Rock, preset 1 to Hits, and preset 2 to News, you could jump to the News channel quickly by pressing “PRESET - 2.
The X M - 100 SETUP Mode allows you to configure options such as forced tuning, blocking, skipping, etc. To enter the SETUP Mode, press and hold the MODE button on the front of the unit for 4 seconds or depress the SETUP button on the remote. The Setup indicator i lluminates, and the menu shown below appears.
SETUP MENUS MODE TO EXIT SETUP up Wraps Around SIGNAL QUAL LINE LEVEL up SETUP SETUP FRONT LOCK SETUP TIME ZONE SETUP DLT SAVING SETUP CH BLOCKING SETUP CH SKIPPING SETUP FORCE TUNING SETUP SW VERSION.
When Setup – Sig nal Quality is displayed, pressing the Mode button brings up the following menu: CN1 CN2 TBER #.# #.# ### This menu may also be displayed by holding the power button for 4 seconds when at the main display. Pressing the Mode button returns up one menu level.
The line maximum output level may is adjusted using the up/down buttons. Front Lock When Setup – Front Lock is displayed, pressing the Mode button brings up the follow ing menu: Front Lock? Locked The buttons on the front of the XM - 100 unit may be locked or unlocked using this feature.
When “SETUP – DLT SAVING” is displayed, pressing the Mode button brings up the following menu: SETUP DST Y MAR 2 NOV 1 This submenu shows you a summary of all the daylight savings time parameters. The “Y” next to the “DST” indicates yes, daylight savings time is observed in your region.
SETUP DST FALL BK NOV Press the up/down keys to change the fall back month, when daylight savings time ends and standard time resumes. Press the Mode key to save the change and go to the next submenu. SETUP DST FALL BK W:1 Press the up/down keys to chan ge the Sunday of the month when standard time resumes.
When Setup – CH Skipping is displayed, pressing the Mode button brings up the following menu: Skip ###? N PWR Toggles In the course of using the XM - 1 00 you may find that there are specific channels you prefer not to listen to and would rather skip over.
Force Tuning by Time Force Tuning by Channel Force Tuning Add New Force Tuning by Time Force Tuning by Channel Force Tuning Add New Forced Tuning is an advanced feature for the commercial market that allows programmed events to occur throughout the day or week in an unattended manner.
The second display choice, Forced Tuning by Time, displays Forced Tune events sorted by time of day without consideration of what days of the week the event is effective. The third display choice, Forced Tuning by Channel, displays Forced Tune events sorted by channel number without regard to any other parameter.
“Any” allows for a volume change applied to the current audio channel at the programmed time – a feature useful for decreasing the audio volume during slow hours of a restaurant or bar. Locking and unlocking the front buttons for specific hours of the day (LCK, UNL) and tu rning off the unit at a specified time (Off) may also be programmed.
The XM - 100’s remote control provides identical functionality to the buttons on the front panel. CHANNEL (UP/DOWN) Tune to specific channels. CATEGORY (LEFT/RIGHT) Tune to specific audio categories such as Country, Rock, Hits, Decades, Jazz, News, and more.
Audio Control Systems The XM - 100 has been design ed for easy integration into distributed audio systems by professional installers using the RS232 control port. Antex strongly recommends that the RS232 connection be used only by experienced professional installers.
This Warranty does not extend to the elimination of externally generated static or noise, to correction of antenna problems, to c osts incurred for installation, removal or reinstallation of the product, or damage to other components.
Een belangrijk punt na aankoop van elk apparaat Antex electronic XM-100 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Antex electronic XM-100 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Antex electronic XM-100 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Antex electronic XM-100 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Antex electronic XM-100 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Antex electronic XM-100 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Antex electronic XM-100 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Antex electronic XM-100 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
