Gebruiksaanwijzing /service van het product XLS 8400 van de fabrikant Kodak
Ga naar pagina of 138
Installation and Setup Guide Part No. 1H9613 K O D AK Net w ork Interface Ca r d KODAK XLS 8400 PS Printer KODAK XLS 8600/8600 PS Printer KODAK DIGITAL SCIENCE M 8650/8650 PS Color Printer KODAK DIGIT.
Table of Contents Part No. 1H9613 June 1997 i T able of Contents About this Guide .................................................................................................. vii 1 Feature Overview ...............................................
Table of Contents ii Part N o.1H9613 June 1997 Printer Parameters - General ..................................................................... 4-2 Ethernet Address ............................................................................. 4-2 Mode .
Table of Contents Part No. 1H9613 June 1997 iii Novell NetWare - AppleTalk .................................................................... 6-10 Novell NetWare - AppleTalk - Printer Parameters ......................... 6-10 7 Windows 3.x Workstations .
Table of Contents iv Part N o.1H9613 June 1997 Direct Printing ................................................................................ 10-3 Indirect Printing (Printing through a Server) .................................. 10-4 NT Server Queues .
Table of Contents Part No. 1H9613 June 1997 v SGI Systems ............................................................................................ 12-7 System V Systems Systems .................................................................... 12-8 SUN Solaris Systems .
Table of Contents vi Part N o.1H9613 June 1997 TCP/IP installations ................................................................................. 14-7 Telnet .........................................................................................
About this Guide Part No. 1H9613 June 1997 vii About this Guide This guide pr o vides in f o r mation about installing and configu r ing the K O D AK Net w o r k Inter f ace Card (Netwo r k Inter f a.
.
Feature Overview Part No. 1H9613 June 1997 1-1 1 Feature Overview Network Interface Car d Features The Network Interface Card connects printers directly to Ethernet™ networ ks utilizing IPX, AppleT alk, and TCP/IP protocols in suppor t of Nov ell® NetW are® 3.
Feature Overview 1-2 Part No. 1H9613 June 1997 Features of the Network Interface Card with Novell NetWare • Is defined as a standard NetW are interface and is accessed with NetW are print utilities. • Configures ser v ers and queues using PCONSOLE.
Feature Overview Part No. 1H9613 June 1997 1-3 • Suppor ts printing indirectly for AppleT alk networks connected with routers to Ethernet networ ks . • Suppor ts printing indirectly for AppleT alk networks connected with routers to Ethernet networ ks .
Feature Overview 1-4 Part No. 1H9613 June 1997 Network Interface Car d/Printer Installation Over vie w Section 1: Determine the networ k protocol(s) to be used f or communicating to the Network Interf.
Installing the Hardware Part No. 1H9613 June 1997 2-1 2 Installing the Har dware Y ou ma y choose to hav e K odak Ser vice install the Network Interf ace Card in the printer for a f ee. This fee co vers hardw are installation only; network setup tasks are still your responsibility .
Installing the Hardware 2-2 Part No. 1H9613 June 1997 Getting Ready to Install the Netw ork Interface Card Bef ore you install the Network Interf ace Card, do the follo wing steps: 1. Write the Ether net address needed f or the installation in the space provided belo w .
Installing the Hardware Part No. 1H9613 June 1997 2-3 3. Attach the wrist por tion of the antistatic strap to your wrist. Attach the other end of the strap to the metal plate on the back of the printer .
Installing the Hardware 2-4 Part No. 1H9613 June 1997 5. Grasp the two b lack handles on the metal plate . Slowly pull the dra wer out about six inches. 6. Using the Phillips-head screwdriv er , remo v e the three screws which hold the slot cov er for the Network Interf ace Card in place.
Installing the Hardware Part No. 1H9613 June 1997 2-5 Making the Jumper Selections JP1/JP2 Factory Settings (Both J umpers On) JP1 and JP2 are two small b lack jumpers near the right side in the middle of the Network Interf ace Card. When the card is shipped, each jumper is positioned across both sets of pins (ON).
Installing the Hardware 2-6 Part No. 1H9613 June 1997 The enlarged view in the illustr ation shows the jumper labeling as view ed from behind the printer looking toward the front. LINK Jumper Selection (Non-10BaseT) NO TE: Complete these steps only if link test integrity needs to be enabled and y our cabling is non-10BaseT .
Installing the Hardware Part No. 1H9613 June 1997 2-7 See the illustration belo w for LINK jumper enab led/disabled positions. Installing the Network Interface Car d Do the f ollowing steps to install and seat the Network Interf ace Card: 1. Hold the card so that the connector is on the bottom and the cable receptacles are to ward y ou.
Installing the Hardware 2-8 Part No. 1H9613 June 1997 The cable receptacles should e xtend through the front of the slot. 3. Seat the card by positioning the connector on the bottom of the card against the receptacle on the mother board. Press it gently into place.
Installing the Hardware Part No. 1H9613 June 1997 2-9 Finishing up Finish up the installation by closing the printer: 1. Grasp the b lack handles on the bac k of the pr inter and slide the back of the printer in. 2. Using the Phillips-head screwdriv er , replace the five scre ws you remo ved.
Installing the Hardware 2-10 Part No. 1H9613 June 1997 If the connectivity is correct and the yello w light blinks or does not illuminate, the Netw or k Interf ace Card may be def ective . NO TE: The condition of the green LED is rele vant f or both 10BaseT and 10Base2 connectivity .
Installing Software for the Network Interface Part No. 1H9613 June 1997 3-1 3 Installing Software f or the Network Interface Car d T wo diskettes are included in the kit f or the Network Interface Card. One is Utilities for No vell NetW are and the other is Utilities f or UNIX TCP/IP .
Installing Software for the Network Interface Card 3-2 Part No. 1H9613 June 1997 Installing Software to Configure the Network Interface Card f or TCP/IP Windows NT It is not necessar y to install softw are to use the Network Interf ace Card with Windows NT systems .
Network Printer Parameters Part No. 1H9613 June 1997 4-1 4 Netw ork Printer P arameters This section discusses parameters within the printer related to IPX, AppleT alk and TCP/IP network protocols and methods for modifying parameters from both Macintosh and PC platf or ms.
Network Printer Parameters 4-2 Part No. 1H9613 June 1997 NO TE: If you are setting up a K odak Digital Science TM Desktop Color Proof er 9000, refer to the user’ s guide f or the Network Interface Card shipped with the proof er for specific instructions on using the operator control panel.
Network Printer Parameters Part No. 1H9613 June 1997 4-3 Mode Def ault: PrintSer ver(ps) The mode is alwa ys Pr intServer , and it cannot be modified by users.
Network Printer Parameters 4-4 Part No. 1H9613 June 1997 2. Press until SETUP: PORTS appears . 3. Press Setup/Select to access the SETUP: PORTS submen u. 4. Press until POR TS: IPX appears. 5. Press Setup/Select to access the list of frametypes . 6. Press until the appropriate frametype appears.
Network Printer Parameters Part No. 1H9613 June 1997 4-5 • RSSER VER.EXE for defining a primar y server with the printer in Raster mode. • CNTL_D file must be appended to the configuration files that are downloaded through the par allel pr inter por t.
Network Printer Parameters 4-6 Part No. 1H9613 June 1997 2. Respond to the prompts from the program. An output file named RSSER VER.RS is created. 3. Send the file to the printer through a por t such as the parallel por t. The f ollowing command is one e xample of sending the file to the printer when using the parallel por t.
Network Printer Parameters Part No. 1H9613 June 1997 4-7 Utilities For Printers in Raster Mode K odak Raster Printer Utility— Macintosh utility used to rename the printer in Raster mode. This is the pr inter name as it appears when using the specific printer’ s e xpor t module in conjunction with Adobe Photoshop .
Network Printer Parameters 4-8 Part No. 1H9613 June 1997 The file opens in T eachT ext. 3. Replace “Y ourZoneNameGoesHere” in the f ollo wing line with the name of your z one. NO TE: Do not remov e the parentheses from the command. (%EtherT alk_NV)<</EtherT alkZone (Y ourZoneName- GoesHere)>> setdevparams 4.
Network Printer Parameters Part No. 1H9613 June 1997 4-9 AppleTalk Phase Def ault AppleT alk names are the equiv alent of specific pr inter product names: Def ault: Phase 2 Optional: Phase 1 Changing.
Network Printer Parameters 4-10 Part No. 1H9613 June 1997 6. Press until “ETHERT ALK:VERSION” appears. 7. Press Setup/Select. 8. Press until the v ersion you want appears (VER:1 or VER:2). The currently selected v ersion is indicated by an asterisk (*).
Network Printer Parameters Part No. 1H9613 June 1997 4-11 Assigning the Internet address Do the steps below to enter the Internet (IP) address for the card: 1. Press Setup/Select on the displa y panel when “READ Y” appears on the panel. 2. Press until “SETUP:PORTS” appears.
Network Printer Parameters 4-12 Part No. 1H9613 June 1997 9. Press until “TCP/IP:EXIT” appears. 10. Press until “SETUP:EXIT” appears. 11. Press Setup/Select.
Installing the Software for Kodak Printers Part No. 1H9613 June 1997 5-1 5 Installing the Software f or K odak Printers The software ref erred to here is the software that comes with e very pr inter and not the softw are that comes with the Network Interf ace Card.
Installing the Software for Kodak Printers 5-2 Part No. 1H9613 June 1997 Printing in Raster Mode F or pr inters that only print in Raster mode such as the K odak Digital Science 8650 Color Printer , you need only install the Expor t Module f or Adobe Photoshop .
Novell NetWare Part No. 1H9613 June 1997 6-1 6 No vell NetW are Network Interface Car d/Printer Installation Overview Section 1: Deter mine the network protocol(s) to be used f or communicating to the.
Novell NetWare 6-2 Part No. 1H9613 June 1997 With NetW are, the printer operates as a print ser v er and reads requests from NetW are ser v ers. The printer can ser vice 16 queues on 16 file ser v ers and poll successive queues e very second.
Novell NetWare Part No. 1H9613 June 1997 6-3 NO TE: Nov ell AppleT alk only recognizes the printer when it is in P ostScr ipt mode . Raster mode pr inting cannot be accommodated. Y ou must set up an IPX queue to suppor t both P ostScr ipt and Raster mode printing.
Novell NetWare 6-4 Part No. 1H9613 June 1997 Do the f ollowing steps to create the KSETUP configuration file: 1. Log in to the file ser v er as ADMIN in the main conte xt. 2. Change to the login director y on the file server . 3. Create a K odak director y b y entering the command: md kodak 4.
Novell NetWare Part No. 1H9613 June 1997 6-5 NetW are 4.X: <printserver> <printser ver> is defined b y combining the letter K with the last six digits in the printer’ s Ether net Network Interf ace Card address.
Novell NetWare 6-6 Part No. 1H9613 June 1997 The f ollowing e xample creates a print ser ver: ps1 (K123458 f or NetW are 4.x) and a queue: lp1 on the ser ver: raisa. Y ou could create subsequent queues on raisa that use the same print ser v er , ps1. The pr inter can serve multiple queues on an y ser v er .
Novell NetWare Part No. 1H9613 June 1997 6-7 4. Click on Inser t to create a print ser ver . 5. Enter the name f or the pr int server . The name must be the same one y ou used as <printser ver> when running KSETUP to set up the configuration file.
Novell NetWare 6-8 Part No. 1H9613 June 1997 F or NetW are 4.X , select “Print Queue” from the Pr int Jobs menu. 4. F or NetW are 3.X , select “Queue Servers”. F or NetW are 4.X , select “Status” and “Print Server . ” 5. Press Inser t to displa y the Queue Ser v er Candidates.
Novell NetWare Part No. 1H9613 June 1997 6-9 Printing from Multiple Servers Do the f ollowing steps to print from more than one file ser v er : 1. Use the Change Current File Ser v er menu option in PCONSOLE to change to another ser v er . 2. Define the printer as a pr int server (as described previously).
Novell NetWare 6-10 Part No. 1H9613 June 1997 Novell NetW are - AppleT alk If Nov ell’ s AppleT alk Print Ser vices (A TPS) is not already in use, consult the Nov ell CD-ROM on-line documentation f or setup and use of A TPS. T o use A TPS for the K odak pr inter , an A TPS.
Novell NetWare Part No. 1H9613 June 1997 6-11 Do the f ollowing procedure to configure Nov ell A TPS to ser vice the printer and the queue. In this e xample, the printer is a Kodak printer with a default name of K odak DS 8650 PS. 1. Make a test print to obtain or v erify the pr inter’ s name.
Novell NetWare 6-12 Part No. 1H9613 June 1997 3. Sav e the atps.cfg file. 4. Load atps -s -v Use the -v [v erbose] option to view the atps activity and to v er ify that the contents are e xecuted properly . Y our ser v er can now use the same print ser vices that Macintosh computers use to access a K odak pr inter .
Part No. 1H9613 June 1997 7-1 Windows 3.x Workstations 7 Windows 3.x W orkstations Section 1: Deter mine the network protocol(s) to be used f or communicating to the Network Interf ace Card/printer , .
Windows 3.x Workstations 7-2 Part No. 1H9613 June 1997 is installed, and e xecute the SETUP .EXE file. The K odak printer should now appear in the Installed Print- ers: menu. 2. Select “Connect. ” F rom the Connect window , select an appropriate LPT por t to use for the printer from the P or ts menu.
Part No. 1H9613 June 1997 7-3 Windows 3.x Workstations 2. Set up a PC-NFS ser v er as described in the PC-NFS installation guide. Mak e sure that the ser v er r uns the PC-NFS daemon r pc.pcnfsd. 3. Set up a printer on the PC-NFS ser ver as described in the sections in this guide on UNIX systems.
.
Windows 95 Workstations Part No. 1H9613 June 1997 8-1 8 Windows 95 W orkstations Network Interface Car d/Printer Installation Overview Section 1 : Deter mine the network protocol(s) to be used f or co.
Windows 95 Workstations 8-2 Part No. 1H9613 June 1997 Initial Configuration Steps On a Windows 95 workstation, any user ma y configure a pr inter and select a ser v er print queue to use for printing. Do the f ollowing steps to configure y our pr inter .
Windows 95 Workstations Part No. 1H9613 June 1997 8-3 The Add Printer Wizard window to select a printer opens. 4. Click on Network Printer and then on Ne xt . The f ollowing window which allo ws you to select a network opens. 5. Browse the network f or an appropriate pr inter queue name configured on a file ser v er , and then click on Ne xt .
Windows 95 Workstations 8-4 Part No. 1H9613 June 1997 The f ollowing window which allo ws you to select y our printer model opens. 6. T o install the K odak P ostScr ipt Driver , select “Ha v e Disk, ” and then click on Ne xt . NO TE: Printer dr iv ers provided b y Microsoft appear in the Add Printer Wizard window as K odak printer dr iv ers.
Windows 95 Workstations Part No. 1H9613 June 1997 8-5 If the software is already installed on y our system, click on Browse to locate the director y where it resides . When the correct director y opens in the “Copy manuf acturer’ s files from, ” box, clic k on OK .
Windows 95 Workstations 8-6 Part No. 1H9613 June 1997 A window opens which asks y ou to select the printer and the ribbon that is installed in the printer .
Windows 95 Workstations Part No. 1H9613 June 1997 8-7 If a printer dr iv er is already installed on your system, a window opens where y ou can choose to keep the e xisting driver or install the ne w dr iv er . 10. If the current driver: • oper ates correctly , click on K eep e xisting driv er and then on Ne xt.
Windows 95 Workstations 8-8 Part No. 1H9613 June 1997 The f ollowing window which allo ws you to name y our printer opens. 11. Enter a pref erred name, or use the def ault printer name. Click on Y es or No to use the printer as the default printer . Click on Ne xt .
Windows 95 Workstations Part No. 1H9613 June 1997 8-9 12. Click on Y es to print a test page to verify that the setup is correct. Click on Finish . NO TE: If an error occurs when you print a test page, chec k the Printer Proper ties menus f or the correct printer parameter settings .
Windows 95 Workstations 8-10 Part No. 1H9613 June 1997 A window opens asking y ou to select the drive that contains the CD-ROM. 14. Click on Browse if you need to locate the directory . Click on OK . NO TE: W e recommend that you install all the files .
Windows 95 Workstations Part No. 1H9613 June 1997 8-11 The Printer Proper ties window opens. 2. F rom the Proper ties window , select: • “P ostScr ipt>Adv anced” and make sure that all Ctrl Ds bef ore and/or after job are disabled.
Windows 95 Workstations 8-12 Part No. 1H9613 June 1997 Check all other tabs and set up all corresponding options to match the media, ribbon, and type/size of materials in the pr inter as well as the printing features such as Ultracolor y ou intend to use to av oid pr inting errors.
Windows NT 3.51Workstations and Servers Part No. 1H9613 June 1997 9-1 9 Windows NT 3.51W orkstations and Servers Network Interface Car d/Printer Installation Overview Section 1: Determine the networ k.
Windows NT 3.51Workstations and Servers 9-2 Part No. 1H9613 June 1997 NT W orkstations and Servers : Network Services/Protocols T o verify or install the proper network ser vice/protocol, select “NETWORK CONTR OL P ANEL ” and then either “SER VICES” or “PRO T OCOLS” from the Network menu.
Windows NT 3.51Workstations and Servers Part No. 1H9613 June 1997 9-3 Raster Mode Considerations NO TE: The e xpor t module for NT only supports Raster mode printing using TCP/IP or IPX (Nov ell) queues.
Windows NT 3.51Workstations and Servers 9-4 Part No. 1H9613 June 1997 When a printer is shared on a ser v er , do not select other Windows systems that will use the queue . Dr iv ers should be installed locally on all systems ser viced b y a ser v er .
Windows NT 3.51Workstations and Servers Part No. 1H9613 June 1997 9-5 Configuring for W orkstations and Servers With Windows NT 3.51 Workstation and Ser v er , an administrator must configure the printer and select a mechanism to use f or printing.
Windows NT 3.51Workstations and Servers 9-6 Part No. 1H9613 June 1997 The f ollowing windows open: 3. In the Create Printer window , enter the f ollowing: Printer name: Enter a name that you wish to appear on the resulting printer icon in the Pr int Manager screen.
Windows NT 3.51Workstations and Servers Part No. 1H9613 June 1997 9-7 Select “Other , ” and install the appropriate Kodak printer driver (PPD) provided b y K odak.
Windows NT 3.51Workstations and Servers 9-8 Part No. 1H9613 June 1997 Direct Printing LPR Port (TCP/IP) Configuration Do the procedure on P age 10-2 to install the software for the Network Interf ace Card. Do the f ollowing steps to set up a system to print directly to a printer using TCP/IP: 1.
Windows NT 3.51Workstations and Servers Part No. 1H9613 June 1997 9-9 • Name of Printer on that Machine (ps). NO TE: This entry MUST be ‘ps’ corresponding to the internal ‘PS’ (Print Server) queue name on the printer’ s Network Interface Car d.
Windows NT 3.51Workstations and Servers 9-10 Part No. 1H9613 June 1997 The f ollowing window opens 3. Double-clic k on the per tinent AppleT alk Zone to view the list of av ailable AppleT alk devices and then select the K odak printer by its AppleT alk Name.
Windows NT 3.51Workstations and Servers Part No. 1H9613 June 1997 9-11 Indirect Printing - Creating a Print Queue Use the Create Printer dialog box to set up a shared printer on a network. 1. Click on the “Share this Pr inter on the Network” check bo x.
Windows NT 3.51Workstations and Servers 9-12 Part No. 1H9613 June 1997 network to find and select an appropriate queue. 2. Click on OK in the Create Printer dialog box.
Windows NT 4.0 Workstations and Servers Part No. 1H9613 June 1997 10-1 10 Windows NT 4.0 W orkstations and Ser ver s Network Interf ace Card /Pr inter Installation Ov er vie w Section 1: Deter mine th.
Windows NT 4.0 Workstations and Servers 10-2 Part No. 1H9613 June 1997 NT W orkstations and Servers Network Services/Protocols T o verify or install the proper network ser vice/protocol, select “NETWORK CONTR OL P ANEL ” and then either “SER VICES” or “PRO T OCOLS” from the Network menu.
Windows NT 4.0 Workstations and Servers Part No. 1H9613 June 1997 10-3 Raster Mode Considerations A workstation can be configured as a pseudo-ser v er when using TCP/IP to ser vice a printer by also sharing the printer and assigning a queue name.
Windows NT 4.0 Workstations and Servers 10-4 Part No. 1H9613 June 1997 When a printer is shared on a ser v er , do not select other Windows systems that will use the queue . Dr iv ers should be installed locally on all systems ser viced b y a ser v er .
Windows NT 4.0 Workstations and Servers Part No. 1H9613 June 1997 10-5 Configuring W orkstations and Servers F or Windows NT workstations or ser v ers, an administrator m ust configure the printer and select a mechanism for printing. If necessar y , refer to the README files that come with the installation software f or your printer .
Windows NT 4.0 Workstations and Servers 10-6 Part No. 1H9613 June 1997 Configuring Your Printer for an LPR Port (TCP/IP) NO TE: T o configure your server or workstation to print directly to the printer from AppleT alk, go to Step 9.
Windows NT 4.0 Workstations and Servers Part No. 1H9613 June 1997 10-7 NO TE: If “LPR P or t” is not in the menu, install Microsoft TCP/ IP Printing Ser vices. If necessary , ref er to “Network Ser vice and Protocol Installation. ” The Add LPR compatible printer window opens .
Windows NT 4.0 Workstations and Servers 10-8 Part No. 1H9613 June 1997 Configuring Your Printer for AppleTalk NO TE: NT AppleT alk suppor ts printing in P ostScr ipt mode only . Use TCP/IP queues to suppor t both P ostScr ipt and Raster mode printing.
Windows NT 4.0 Workstations and Servers Part No. 1H9613 June 1997 10-9 12. Double-clic k on your AppleT alk Zone to view the list of av ailable AppleT alk devices . 13. Select the K odak printer by its AppleT alk Name. Click on OK . Y ou are retur ned to the Add Printer Wizard windo w .
Windows NT 4.0 Workstations and Servers 10-10 Part No. 1H9613 June 1997 Installing the K odak Printer Driver Do the f ollowing steps to install the K odak pr inter driver . F rom the Add Pr inter Wizard window: 1. Select “K odak” from the list of Manuf acturers.
Windows NT 4.0 Workstations and Servers Part No. 1H9613 June 1997 10-11 The Locate File window opens . 4. Locate an NTPrint file. Click on Open . The Add Printer Wizard window opens with your printer selected.
Windows NT 4.0 Workstations and Servers 10-12 Part No. 1H9613 June 1997 If a printer dr iv er is already installed on your system, a window opens asking if y ou wish to keep or replace the e xisting dr iv er . 6. If the current driver: • operates correctly , click on K eep e xisting dr iv er .
Windows NT 4.0 Workstations and Servers Part No. 1H9613 June 1997 10-13 7. Enter the printer name as you wish it to appear in the Print Manager . Select “Y es” or ”No” f or default printer .
Windows NT 4.0 Workstations and Servers 10-14 Part No. 1H9613 June 1997 The Add Printer Wizard windo w to print a test page opens. 9. Click on Y es and then on Finish .
Windows NT 4.0 Workstations and Servers Part No. 1H9613 June 1997 10-15 Upon installation of the driver softw are, the newly-configured printer appears in the Pr int Manager windo w .
Windows NT 4.0 Workstations and Servers 10-16 Part No. 1H9613 June 1997 Selecting a Print Queue for Indirect Printing F ollow the steps in “Creating a Print Queue for Indirect Printing” to configure a workstation to print from LPT1. This procedure installs the driver locally on a workstation.
Windows NT 4.0 Workstations and Servers Part No. 1H9613 June 1997 10-17 Printer Properties and Document Defaults T o av oid pr inting errors , set up the appropriate pr inter characteristics by doing the f ollowing: 1. F rom the Pr inter’ s window , select the K odak pr inter you configured.
Windows NT 4.0 Workstations and Servers 10-18 Part No. 1H9613 June 1997 T o set up proper ties for the output from y our printer , do the f ollowing steps: 1. F rom the Pr inter’ s window , select the K odak pr inter you configured. 2. Select “Document Defaults” from the File menu.
Macintosh Workstations Part No. 1H9613 June 1997 11-1 11 Macintosh W orkstations Network Interface Car d/Printer Installation Overview Section 1 : Deter mine the network protocol(s) to be used f or co.
Macintosh Workstations 11-2 Part No. 1H9613 June 1997 AppleT alk Network Printing Setup Macintosh operating systems use either the network control panel or the AppleT alk control panel to select EtherT alk. • T o use the network control panel, pull down the Apple menu and select “Control P anel>Network>EtherT alk.
UNIX Workstations and Servers Part No. 1H9613 June 1997 12-1 12 UNIX W orkstations and Servers Network Interface Car d/Printer Installation Overview Section 1 : Deter mine the network protocol(s) to b.
UNIX Workstations and Servers 12-2 Part No. 1H9613 June 1997 The ref erence file for lpr is /etc/printcap . This file contains a descr iption of the pr inter , the name of the director y where the j.
UNIX Workstations and Servers Part No. 1H9613 June 1997 12-3 Printer Installation/Configuration Automatic Installation The installation script on the TCP/IP utilities diskette is f or UNIX systems only . The disk is in UNIX tar format. The install scr ipt is inappropriate for use on a PC or Macintosh system.
UNIX Workstations and Servers 12-4 Part No. 1H9613 June 1997 5. List the files you loaded b y entering the command ls 6. Run the installation script by entering the command ./install.sh 7. Respond to the script's prompts. On BSD UNIX systems the installation script creates an entr y in the /etc/printcap file for the printer you specified.
UNIX Workstations and Servers Part No. 1H9613 June 1997 12-5 /etc/printcap File Edit the /etc/printcap file if necessar y . The /etc/printcap file contains entries separated by colons (:). If an entr y needs to continue on the ne xt line, enter a backslash () at the end of the line.
UNIX Workstations and Servers 12-6 Part No. 1H9613 June 1997 Printer Status T o check that the printer is up and responding on the network, use the ping command: ping <host printer name> If the .
UNIX Workstations and Servers Part No. 1H9613 June 1997 12-7 NO TE: On some systems, the ping command contin uously displa ys messages such as: 64 bytes from 8650 (192.185.2.3) icmp_seq=0 time=3ms T o discontinue the ping command, press delete or Ctrl-C .
UNIX Workstations and Servers 12-8 Part No. 1H9613 June 1997 System V Systems SUN Solaris Systems If you ha ve prob lems using the install scr ipt, do the f ollowing procedure to use lpd suppor t from Solaris-based System V UNIX systems. These steps are similar for other System V systems.
UNIX Workstations and Servers Part No. 1H9613 June 1997 12-9 5. Enter the f ollowing command to star t the print scheduler : /usr/lib/lpsched 6. Enable the printer by entering the f ollowing command: enable <printername> 7.
.
Printing Part No. 1H9613 June 1997 13-1 13 Printing Printing Modes - P ostScript and Raster The K odak printers suppor ted are of 2 types. Models with the PS e xtension suppor t both P ostScr ipt and Raster printing modes. Models with no PS e xtension suppor t Raster mode printing only .
Printing 13-2 Part No. 1H9613 June 1997 Changing between P ostScript and Raster Printing Modes NO TE: If you are setting up a K odak Digital Science ™ Desktop Color Proof er 9000, you ma y wish to ref er to the user’ s guide f or the Network Interface card shipped with the proof er for instructions on using the displa y/control panel 1.
Printing Part No. 1H9613 June 1997 13-3 P ostScript Mode Printing Printing from Microsoft Windows Y ou can pr int from Microsoft Windows applications using FILE > PRINT . Be sure to use FILE > P AGE SETUP to setup or v er ify per tinent printing parameters such as paper size and ribbon type.
Printing 13-4 Part No. 1H9613 June 1997 Printing from DOS NPrint Print to the pr inter as if it were an y other Nov ell print ser ver . F or e xample, use the Nov ell CAPTURE command to redirect one of the LPT por ts to a queue ser viced b y the Network Interf ace Card.
Printing Part No. 1H9613 June 1997 13-5 Printing from BSD UNIX Systems K odak does not de velop P ostScript dr iv ers or e xpor t modules for UNIX platf orm(s). Howe ver , other vendors do pro vide solutions in suppor t of K odak pr inters. These solutions suppor t v ar ious UNIX/ Windows/Macintosh platf or ms and interf aces.
Printing 13-6 Part No. 1H9613 June 1997 Some common System V pr int commands are listed belo w. Printing from VMS Systems Printing with MultiNet™ on a VMS host The Network Interf ace Card works with a MultiNet stream queue on a VMS host.
Printing Part No. 1H9613 June 1997 13-7 Raster Mode Printing Windows and Macintosh Platforms K odak only suppor ts printing in Raster mode through the use of K odak printer specific expor t modules f or Adobe Photoshop. T o select the pr inter in Raster mode , select “Export” from the File menu to open a Select a K odak Pr inter screen.
.
Troubleshooting Part No.1H9613 June 1997 14-1 14 T roubleshooting If you are ha ving trouble printing, first v er ify that the standalone printer with no network interface connection operates correctly . Secondly , verify that the printer is configured correctly when connected to your netw or k.
Troubleshooting 14-2 Part No. 1H9613 June 1997 V erify Network Connectivity 1. When the printer finishes initialization and the front display/ control panel displa ys the message “READ Y , ” check that the LEDs on the back of the printer operate correctly .
Troubleshooting Part No.1H9613 June 1997 14-3 that are downloaded to the printer are eff ective when y ou restar t the printer . • Y ou may want to reset the printer to f actor y def aults from the printer’ s front control/displa y panel. Refer to ”Printer P arameters” for instructions on resetting the printer .
Troubleshooting 14-4 Part No. 1H9613 June 1997 to define a pref erred ser v er (factory default setting). If y ou hav e any problems , you should define the pref erred ser v er as a troubleshooting precaution.
Troubleshooting Part No.1H9613 June 1997 14-5 • Check to see if the print queue has been disab led. If the queue is enabled b ut your job is not in it, a w or kstation problem has pre vented the job from entering the print queue. Check the w or kstation.
Troubleshooting 14-6 Part No. 1H9613 June 1997 W e recommend that you install the printer driver and/or the e xpor t module on each ser v er and workstation on your network. When you set up the servers f or shar ing, install only the software rele vant to the operating system f or the ser v er .
Troubleshooting Part No.1H9613 June 1997 14-7 - If the pr inter is installed on a network with multiple z ones, check the other z ones for the printer . The printer will boot up to the def ault zone that is supplied b y the network router . - Make sure that the printer has been selected in the Chooser .
Troubleshooting 14-8 Part No. 1H9613 June 1997 • Do the initial steps listed in this troubleshooting section f or the printer , connectivity parameters, and applications if y ou hav e not already done so . • Check the test print to v er ify that the pref erred ser ver is correct.
Troubleshooting Part No.1H9613 June 1997 14-9 No ans wer from <printer name> If you are using the 10BaseT port and hav e nonstandard cabling such as A T&T or HP ST ARLAN, you ma y need to disable link integrity .
Troubleshooting 14-10 Part No. 1H9613 June 1997 T o enable telnet with the Network Interf ace Card, both jumpers (JP1/JP2) on the card must be in the “ON” position (jumpered). If 10BaseT is the connection to the network, these jumpers may be left in place to accommodate both telnet capabilities and normal operation.
Troubleshooting Part No.1H9613 June 1997 14-11 route f or BINFORD = 0 60 2f bf 35 8b Getting route f or D294-FPN1 route f or D294-FPN1 = 0 60 2f bf 35 8b . . . Getting route f or HSD_SAA_1 route f or HSD_SAA_1 = 0 60 2f bf 35 8b F ound ser v ers: 0: BINFORD 1: D294-FPN2 2: D294-FPN1 .
Troubleshooting 14-12 Part No. 1H9613 June 1997 K odak Customer Assistance Center Contact the K odak Customer Assistance Center if you: • hav e questions about your warranty . • want to kno w where to get ser vice. • hav e questions about software/printer interaction.
Part No. 1H9613 June 1997 Index-1 Inde x A AppleTalk installing software for, 3-1 printer parameters with, 4-6 selecting a PostScript printer 11-2 setting up network printing, 11-2 AppleTalk Name defa.
Index-2 Part No. 1H9613 June 1997 E Eliminating error pages when printing from TCP/IP, 7-3, 8-11 Ethernet address, 2-2, 4-2 Ethernet cable, 2-9 Ethernet, 1-1 Export Module for Raster mode printing, 13.
Part No. 1H9613 June 1997 Index-3 LINK jumper selection, 2-6 manual selection, 2-5 selecting, 2-5 Troubleshooting, 14-2 K Kodak printer driver copying files for, 10-14 installing for Windows 3.
Index-4 Part No. 1H9613 June 1997 N Network Interface Card features 1-1 installing, 2-7 requirements for installing, 2-1 using with Macintosh workstations, 11-1–11-2 using with Windows 95 workstations, 8-1–8-11 using with Windows NT 3.51, 9-1–9-13 using with Windows NT 4.
Part No. 1H9613 June 1997 Index-5 utilities diskette, 3-1 Novell Netware defining a server for a PostScript printer, 4-5 NPRINT utility, 6-2 O OS patch CD-ROM with UNIX-System V systems, 12-8 P PC-NFS.
Index-6 Part No. 1H9613 June 1997 PSSERVER.PS file on Utilities diskette 3-1 R Raster mode printing from UNIX platforms, 13-7 from Windows NT 3.51 workstations and servers, 9-3 printing from Windows and Macintosh platforms, 13- 7 with Windows NT 4.
Part No. 1H9613 June 1997 Index-7 Troubleshooting, 14-1–14-12 U UNIX installing software for, 3-2 SGI systems 12-7 utilities diskette, 2-1 UNIX, SystemV installing software for 3-2 UNIX-BSD with SGI.
Index-8 Part No. 1H9613 June 1997 setting printer properties, 10-17 Windows 3.x Workstations setting up with TCP/IP from PC-NFS, 7-2 Windows 95 workstations configuring the printer for, 8-2 installing the Kodak printer driver with, 8-4 printing from TCP/IP, 8-12 setting the printer properties for, 8-10 Windows NT 3.
EASTMAN K OD AK COMP ANY Rochester , New Y or k 14653 K OD AK CANADA INC . T oronto, Ontario M6M 1V3 Canada K odak and Digital Science are trademarks of Eastman K odak Company . P ostScript is a trademark of Adobe Systems Incorporated or its subsidiar ies .
Een belangrijk punt na aankoop van elk apparaat Kodak XLS 8400 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Kodak XLS 8400 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Kodak XLS 8400 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Kodak XLS 8400 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Kodak XLS 8400 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Kodak XLS 8400 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Kodak XLS 8400 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Kodak XLS 8400 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.