Gebruiksaanwijzing /service van het product 2 van de fabrikant Korg
Ga naar pagina of 30
1 E.
1 T able of Contents Auto Song Setup function ...................... 21 Other enhancements ............................. 21 Utility menu ................................................... 21 Improvements ..............................................
2 About this manual This manual explains the new functions that have been added in KARMA Music W orkstation system version 2.0, and the improvements that have been made fr om version 1.0. • “Introduction” provides an overview of the major new functions of version 2.
3 Introduction Main features of version 2.0 System version 2.0 adds numerous new featur es to the KARMA music workstation. KARMA function 1. Extended GE suppor t In addition to the 1,190 preset GEs (Generated Ef fects) used to generate phrases and patterns within a KARMA module, system version 2.
4 Sequencer mode 1. “T one Adjust” parameters The “T one Adjust” parameters let you make temporary adjustments to the sound of the Programs used by each track as an edit that is only used for the current song.
5 Introduction Installing the software into the KARMA Music W orkstation In order to upgrade to system version 2.0, you must install the following two types of data into the KARMA music workstation. • System Boot Disk for KARMA Music W orkstation This is the system update data.
6 GE Select In addition to the 1,190 preset GEs (Generated Ef fects) that generate phrases and patterns within each KARMA module, system version 2.0 gives you 320 rewritable user GE memories. In conjunction with this addition, you can now select user GEs in the “GE Select” fields of each mode.
7 KARMA Function K.R TC (KARMA RealTime Controls) System version 2.0 adds a value display function to the K.R TC (KARMA Realtime Controls) page of each mode. K.R TC (KARMA Realtime Controls) appears in the following pages. Program mode PROG 1.1-4 ( ☞ PG p.
8 The display in Combination mode 6.2–3a 6.2–3a: Freeze Randomize In modes where you can use mor e than one KARMA module (Combination, Sequencer , and Song Play modes), use the [ ]/[ ] keys to select the KARMA module for which you want to set the Fr eeze Randomize parameters.
9 KARMA Function (2) “Start Seed”: any value , “Freeze Loop Length”: Of f Each time triggering occurs, the same phrase will be gener- ated. Differ ent “Start Seed” values cause differ ent phrases to be generated.
10 If the “Start Seed” parameter (6.2-3a ☞ p.8) of the KARMA module for which you execute random captur e is assigned as an RT Parameter ( ☞ p.1 1), a message of “Can’t execute random captur e” will be displayed, and random capture will not be executed.
11 KARMA Function “Seed” is the source data fr om which the randomiza- tions are cr eated. The “Seed” of the phrase being looped is automatically set internally within the KARMA module as the “Start Seed.” The “Start Seed” is used each time the GE is triggered.
12 AutoName w/GEchg System version 2.0 adds “AutoName w/GEchg” to the utility menu commands in the Play KARMA and KARMA Setup pages of each mode. “AutoName w/GEchg” (“AutoName GEchg” in Sequencer mode) will appear in the utility menu of the following pages.
13 KARMA Function GE Parameter KARMA Music W orkstation system version 2.0 adds several new GE parameters and GE parameter values. Planned future pr oducts in the EXB-PCM 04/05 are expected to include new programs, combinations, and GE data designed for the KARMA music workstation that will use these parameters.
14 simulate the T riton Arpeggiator setting “Arpeggio T ype”: As Played (Fill) . 2: R-restar t at other end of Phase If note generation would extend beyond either end of the playback portion of the Phase, those notes are r eplaced by notes within the playback portion, as if the rif f restarted at the other end.
15 KARMA Function Step T ransp. T emplate [0…17] Allows one of 18 differ ent templates for the 16 steps of a Phase Pattern to be chosen and applied to the current Phase Pattern.
16 the “gate-time” of each note in the pattern simultaneously , similar to the previous option. For example, if the Duration Pattern is generating 16th - 8th at a tempo of 120 BPM , the notes would have the durations of 125 ms , 250 ms , etc. If the “Duration V alue” is 80% , they would be generated as 100 ms , 200 ms , etc.
17 KARMA Function Pitches-W eighting Cur ve [0…3] 0: Exponential 2: Exp-S 1: Logarithmic 3: Log-S Chooses a weighting curve shape for the top part of the CC Pattern Grid (Pitches).
18 Sequencer mode SEQ 5.3: T one Adjust System version 2.0 adds a SEQ 5.3: T one Adjust page following the 5.3: T rack Edit page ( ☞ PG p.102) of Se- quencer mode. 5.3–1: T A1..8 (T one Adjust1 T01–08) 5.3–2: T A1..16 (T one Adjust1 T09–16) 5.
19 Sequencer mode A EG A (Amp EG Attack Time) [-99…+00…+99] A EG D (Amp EG Decay Time) [-99…+00…+99] A EG S (Amp EG Sustain Level) [-99…+00…+99] A EG R (Amp EG Release Time) [-99…+00…+99] These adjust only the amp parameter as in “F .
20 Copy From Comb (Copy from Combination) As described below , system version 2.0 enhances the utility menu command “Copy From Comb” ( ☞ PG p.72) found in the SEQ 1.1-1 page. Also, a “Multi REC Standby” check box has been added to the “Copy From Comb” dialog box.
21 Sequencer mode Quantize - Swing Parameter System version 2.0 adds a “Swing” parameter to the dialog box for the “Quantize” utility menu command ( ☞ PG p.101) of the SEQ 5.2-1: T rack Edit page. Quantize Swing [-300%…+300%] Adds a sense of swing to the rhythm.
22 Global mode RT (Realtime Command) An “R T (Realtime Command)” check box has been added to GLOBAL 2.1-1a: MIDI Setup ( ☞ PG p.137). RT (RealTime Command) [Off, On] Off (unchecked): MIDI common.
23 Global mode Stop: If “ Start “ has been previously transmitted, the MIDI system realtime message “ Stop ” will be transmitted at the moment you turn off the [KARMA ON/OFF] key . MIDI OUT KARMA Music Workstation EM-1 MIDI IN “MIDI Clock”: Internal “S/S Out P/C”: On Clock: Ext EM-1 TAP 1 2 5 7 10 12 14 16 15 13 11 9 8 4 3 ☞ PG p.
24 Disk mode Additional Load functions The following functions have been added to PG p.150 “Load Selected.” Load .KGE select icon All data from the .KGE file will be loaded. 1 If you want the identically-named .PCG and .SNG files to be loaded along with the .
25 Disk mode 1.1–2: Save Utility menu “Save PCG & SEQ” and “Save User GE” have been added to the utility menu commands. ( ☞ PG p.153) Changes and additions to the Save function The following functionality has been changed or added. Save All In addition to saving .
26 Parameters that can be loaded/saved to disk in version 2.0, but not in version 1.0 1. Pr ogram, Combination, Sequencer , Song Play parameters • Each mode 6.1-1 (1.1-1): “KARMA T ime Signature” • Each mode 6.2-3: “Start Seed” • Each mode 6.
27 Other Functions Other functions T ap T empo Control A tap tempo control function has been added in Program, Combination, Sequencer , and Song Play modes.
28 MIDI About system exclusive messages KARMA music workstation system version 2.0 adds support for the following system exclusive messages. •S MF Data Dump Request reception •S MF Data Dump trans.
2002 KORG INC. 1403 EH Printed in Japan IMPORTANT NOTICE TO CONSUMERS This product has been manuf actured according to strict specifications and voltage requirements that are appli- cable in the country in which it is intended that this product should be used.
Een belangrijk punt na aankoop van elk apparaat Korg 2 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Korg 2 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Korg 2 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Korg 2 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Korg 2 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Korg 2 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Korg 2 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Korg 2 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
