Gebruiksaanwijzing /service van het product FNS-5000B van de fabrikant LevelOne
Ga naar pagina of 108
FNS-5000B Network Att ached Storage 2-Bay SA T A HDD w/ Gigabit Ethernet User Manual V er . 1.00 - 0608.
2 FOREWORD Thank you for choosing LevelOne pro ducts! This user manual provides det ailed instructions of using FNS-5000B. Please rea d carefully and start to enjoy the po werful functions of FNS- 5000B LIMITED W ARRANTY In no event shall the liability of Digital Dat a Communications Co.
3 T able of Content s 1. Overview ....................................................................................................................... . 5 1.1. Introduction ...........................................................................
4 3.5.3. USB Prin ter ........................................................................................................ 51 3.6. User Management ....................................................................................... 53 3.6.1. Users .
5 1. Overview 1.1. Introduction Thank you for choosing FNS-5000B NA S. This product has the following key features: 9 Support two SA T A HDD with embedded RAID function to enhance dat a security 9 Ena.
6 1.3. Hardware Illustration K-Lock Security Slot USB 2.0 x 2 LAN Port Reset Button Power Connecto r Power Button One T ouch Copy Button USB 2.0 LED Indicators: USB, S tatus, HDD1, HDD2, LAN, and Powe.
7 2. Installation 2.1. Inst all Hard Disk 1. Unfasten the four screws in the front of FNS- 5000B and remove the front p anel. 2. Loosen the screws on the disk tr ays and t ake out the disk trays. 3. Install a hard disk on ea ch tray . Make sure the disk holes match the holes at the base of the disk tray and lo ck t he disk with four screws.
8 4. Insert the disk trays to FNS-5000B. Push the disk trays to the end. Fasten the screws on the trays. When two disks are inst alled, make sure HDD1 is installed on t op of HDD2.
9 2.2. Hard Disk Recommendation List The following HDD models are verified by LevelO ne that are compatible with FNS-500 0B. It is recommended to use the disk models listed here. Other HDD brands t hat are not tested by LevelOne may or may not work properly with FNS-5000B.
10 2.3. Setting Up Please check your network environment and sele ct the appropriate installation method befo re installing FNS-500 0B. 2.3.1. Office/ Home Connect FNS-5000B and P C to the sam e hub/ switch/ router . 2.3.2. Individual Connect FNS-5000B direct ly to your PC by a network cable.
11 When you have verified your network environment, please follow the step s below to install FNS-5000B. 1. Connect FNS-5000B to hub/ switch/ rou ter or PC according your network environment. 2. Connect USB printer to FNS-5000B and enable USB printer service * .
12 2.4. LED / System S t atus FNS-5000B provides LED indicators for you to i ndicate system status an d information easily . When FNS-5000B is turned on, please check the following items to make sure system status is normal.
13 LED Display / System S tatus LED LED Display & System S tatus n USB S tatus Blue: Y ou can press the copy button to copy dat a. Blink in blue: Copying dat a Blink in blue once: Detecting or rem.
14 2.5. Configure Sof tware Settings Afte r che cking system status, please follow t he step s below to configure software settings of FNS-5000B. The co nfiguration procedure of Windows and Mac u sers a re different. Please select the appropriate pro cedure according to your OS.
15 2. After inst alled, run Quick Inst all Wizard, the following screen will be shown. Select name on the list and click Configure Enter the default user name and p assword.
16 When you have entered quick config uration page, ente r relate d information to co mplete the settings. Click OK to save c hanges. Note: If you select to enter IP address manually , please make sure your PC and FNS-5000B are in the same LA N. If you are not sure about the network settings, please conta ct your network administrator or ISP .
17 FNS-5000B provides several default sha re folde rs for dat a sharing and access. T o map the share folders on FNS -5 000B as you r drive, check the option “Map drive” and follow the steps below to pro ceed. a. For example, to map the folder Public as your drive, select the folder and click Map Network Driv e .
18 c. Upon successful conne ctio n, you can st art to use the sha re folde r o n FNS-5000B . Y ou can access these folders by opening My Computer . 3. Quick Install Wizard will a ppear when all conf igu rations are completed. Double -click on the name of FNS-5000B on the list to enter administration p age.
19 4. When the administration p age of FNS -5000B is shown, you can start to use the services. If you have any questions during web a dmini stration, please click t he help button on the top right hand corner of the p age. T o modify system settings, c lick Administration .
20 2.5.2. Mac Users FNS-5000B provides two methods for Mac users to con nect to FNS-5000B. Y ou can select A. Connect FNS-5000B by Mac directly or B. Conne ct FNS-5 000B by the network . A. Connect FNS-5000 B by Mac directly 1. Please go to Network setti ngs a nd select Using DHCP .
21 3. When the administration p age is shown, click Administra tion . Enter the default user name and passwo rd to logi n. Default user name: administrator Password: admin 4. Follow the step-by-step gu ide in Qui ck Configuration to complete t he settings of FNS- 5000B.
22 B. Connect FNS-5000B by the network 1. Please go to Network setti ngs to che ck and write down the subnet and route r address of your Mac. Then sel ect Using DHCP . Note: If you are not sure about the network settings, plea se cont act your network administrato r or IS P .
23 3. When the administration p age is shown, click Administra tion . Enter the default user name and passwo rd to login. Default user name: administrator Password: admin.
24 4. Go to TCP/IP Configuration of Network Settings . Select to use sta tic IP and input the IP addre s s of FNS-500 0B. Make sure the value does not conflict with the IP address of your Mac and other devices in LA N.
25 5. Click Ye s to restart FNS-5000B for the changes to t ake effect. Please wait patiently for FNS-5000B to rest art. 6. Connect your Mac and FNS-5000B to the net work. O pen a web browser and enter the IP address of FNS-5000B you set up in step 4. Note: Please use the browser Safari in Mac to a ccess FNS -5000B.
26 7. Click Administration and enter the def ault user name and p assword to login. Default user name: administrator Password: admin 8. Follow the step-by-step gu ide in Qui ck Configuration to complete t he settings of FNS- 5000B.
27 3. Powerful Services FNS-5000B provides the following pow erful functions and ap plications. A. Use network share-Public folder 1. Y ou can access the public folder of FNS-5000B by the following means: a. Open My Network Places and find the wo rkgro up of FNS-5 000B.
28 B. Manage FNS-5000B Manage FNS-5000B using web browser by Windows ® or Mac 1. Y ou can access FNS-5000B web administr ation p ag e by the followi ng methods: a.
29 2. When the administration p age is shown, click Administra tion , Web File Manager , Web Server , Multimedia S tation , or Download St ation . Enter the user name and password, and then start to manage FNS-5000B. For further det ails, please refer to the user manual in FNS-5000B CD-ROM.
30 C. Use FNS-5000B Services Multimedia St ation FNS-5000B provides a user-friendly we b management interface for you to manage personal albums easily . Y ou can view images and multimedia files, or browse ph otos by thumbnails preview . Please refer to Chapter 5.
31 3.1. Server Administration There are 8 main sections in server ad ministration:.
32 3.2. Quick Configuration Please follow the step-by-step guide in Quick Configuration to complete the se ttings of FNS- 5000B. If you have any questions during web adm inistratio n, please click the help button on the top right hand corner of the pag e.
33 Step 2. Change the administrator password o r select to use the origi nal password. Step 3. Enter the date, time and select the time zone for the server . Step 4. Select the language the server uses to display files and directories. The default setting is English .
34 Step 5. Enter the IP address, subnet mask and default gatew ay for the server . Step 6. Initialize disk volume in FNS-500 0B for the first time configuration.
35 Step 7. When FNS-5000B is initialized, the basi c setting s will be shown..
36 3.3. System Settings Basic system settings inclu de the se rver name, date, time, and view system settings. 3.3.1. Server Name Enter the name of FNS-5000B. The server na me can be 14 characters long at maximum, which supports alph abet s, numbers and hyphen (-).
37 3.3.2. Date & Time Set the date, time, and time zone according to your location. If the settings are incorre ct, the following problems may occur: 9 When using a web browser to a ccess or save a file, the display time of the action will be incorrect.
38 3.3.3. Encoding Setting Select the language FNS-5000B uses to display files a nd dire ctories. Note: All files and directories on FNS-5 000B will be created using Unicode encoding. If your FTP client s or the OS of your PC does not support Unicode, e.
39 3.4. Network Settings Y ou can configure network settings in this sect ion a nd enable several powerful applications of FNS-5000B, e.g. Multimedia S tation, Download S tation, and W eb Server . 3.4.1. TCP/ IP Configuration Y ou can select one of the following two me thods to configure the TCP/IP settings 1.
40 Jumbo Frame Setting (MTU) "Jumbo frames" refer to Ethernet frames that are larger than 1500 bytes. It is designed to enhance Ethernet networking throu ghp ut and reduce the CPU utilization of large file transfe rs by enabling more ef fici ent larger p aylo ads per pa cket.
41 3.4.2. Microsoft Networking Enable file service for Microsof t networking: If you are using Microsoft Wind ows, enable this service to access the files on network sh are fold ers. Assign a workgroup name. 9 St andalone Server Use local users for user authentication.
42 3.4.3. Apple Network T o use FNS-5000B on Apple Mac operating sy stem, enable AppleT alk network support. If your AppleT alk network uses ex tended networks, an d is assig ned with multiple zones, assi gn a zone name to FNS-5000B. If you do not want to assign a network zone, enter an asteri sk (*) to use the default setting.
43 3.4.5. FTP Service When you enable FTP service, you can define the port number for the service an d maximum number of users connected to the FTP at the same time.
44 3.4.6. Multimedia Station T o share multimedia files like photos, m usic or video files on the network, please enable Multimedia S tation. For further information, plea se ref er to Chapter 5. UPnP Media Serv er FNS-5000B support s UPnP technology which br ings you greate r convenience t o enjoy multimedia files.
45 3.4.7. Download Station T o use P2P d ownl oad function of FNS-5000B, please enabl e Download S tation. For further information, please refer to Chapter 6. NOTE: PLEASE BE W ARNED AGAINS T ILLEGAL DOWNLOADING OF COPYRIGHTED MA TERIALS. THE DOWNLOAD ST A TION FUNCTIONALIT Y IS PROVIDED FOR DOWNLOADING AUTHORIZ ED FILES ONL Y .
46 3.4.9. View Network Settings Y ou can view current network settings and st atus of FNS-5000B in this section..
47 3.5. Device Configuration Y ou can configure SA T A disk, USB disk and USB printer settings in this se ction..
48 3.5.1. SATA Disk This page sh ows the model, size and current st atu s of the disk(s) install ed on F NS-5000B. Y ou can format and check disks, and scan bad blo cks on the disks.
49 Y ou can create the following disk volumes: • Single Disk V olume Each disk will be used as a st andalone disk. However , if a disk is damaged, all data will be lost. • RAID 1 Mirroring Disk V olume RAID 1 (mirroring disk) protect s your data by automatically backing up the conten t s of one drive onto the second drive of a mirrored p a ir .
50 3.5.2. USB Disk FNS-5000B support s USB disks and th umb drives for extended storage. Connect the USB device to the USB port of FNS-5000B, when the dev ice is succe ssfully detected, the det ails will be shown on this page.
51 3.5.3. USB Printer 1. T o provide printer sharing functio n for network users, you can simply conne ct a USB printer to the USB port of FNS-5000B. FNS- 5000B will detect the printer automatically . 2. A printer icon should be sh own in the share folder of the server .
52 3. Install the printer driver . 4. When finished, you can st art to us e network printer service of FNS-5000B. Note: 1. FNS-5000B support s general USB printer only but not multifunction printe r . 2. FNS-5000B printer service is only su pported in Windows OS but not Mac OS.
53 3.6. User Management The files on FNS-5000B can be share d among multiple users. For easi er management and better control of users’ access right, you have to organize users, user group s and their access right control. 3.6.1. Users The system has created the following users by defa ult: 1.
54 512 users can be created at maximum (including system default users). You can create a new user according to your needs. The following information is required to create a new user: 9 User name The user name must not exceed 32 ch ara cte rs.
55 3.6.2. User Groups User group is a collection of users with t he same access right to files or folders. FNS-5000B has created the following user gro up s by default: 1. Administrators All members in this group have administrat ion right. You cannot del ete this group.
56 Create Users and Assig n Users to User Group The following example demonst rates how to create new users an d assign users to a user group. ABC Co. has recently recruited two em ployees Mr. Jones Lee for Administration Department and Ms. Jane Wu for Sales Department.
57 iii. Select the user groups th e users belong to on the right list, i.e. Mr. Jones Lee for Administration Dept and Ms. Jane Wu for Sales Dept, and cli ck Add .
58 Create Private Net work Share for User Groups You can create particular n etwork share for each user group. The p rocedu re i s described as below: 1. To create a network share calle d media accessible by Administration Departme nt only, please go to “User Managem ent—Use r Groups” page.
59 3. You can see the folder media in Net work Share Managemen t page. 4. Enter Access Control. You can see that only Administration Dept has full acce ss right to the folder.
60 3.6.3. Quota T o allocate disk volume ef ficiently , you can sp ecify the quota that can be used by each user . When this function is enabled and a u ser has reached his/her disk q uota, he/she can not upload data t o the se rver anymore. By default, no limitations are set for u sers.
61 2. Select Jones Lee on User page a nd click Quota Settings on the right. 3. Enter the quota size 2000MB and cli ck OK . 4. Follow the same steps and enter the qu ota size 4000MB for Jane Wu an d cli ck OK . The quota setting is successfully applied.
62 3.7. Network Share Management The primary purpose of network sto rag e is file sharing. You can create different network share folders for various types of files, a nd provid e different file access right s to users or user groups.
63 3.7.1. Create T o create a network share, enter the following inform ation: 9 Network share name The length of the network share name cannot exceed 32 sin gle-byte cha racters or 10 double-byte characters, and can not cont ain the followi ng characters: " .
64 3.7.2. Property To edit the property of an existing netwo rk share, select a share an d click Prope rty . You can then edit the content of that share.
65 3.7.3. Access Control When a network share is created, you can assign access right s to users or user grou p s: 9 Deny access Access to the network share will be denied. 9 Read only Users can read the files on ly on the network sha re. 9 Full access Users can read, write, create, or delete files and fold ers o n the network share.
66 3.7.5. Restore If the default network shares of FNS-50 00B ar e not created su ccessfu lly, you can use the Restore function to resto re the netwo rk shares.
67 3.8. System T ools System Tools enable you to optimize the maintenance and management of FNS-500 0B..
68 3.8.1. Alert Notification Enter the e-mail address of the administr ator and t he IP addre ss of the SMTP server . In case of warning or malfunction, e.g. CPU fan fails , a drive fails or is unplugge d, an em ail will be sent to the administrator automatically .
69 3.8.3. Hardware Settings Y ou can enable or disable the har dware functions of FNS-5000B. i. Enable configuration reset switch By enabling this option, you can press t he re set button for 5 seconds to reset th e administrator password and system settings to default.
70 3.8.4. System Update Note: If the system is running properly , you do not need to update the firmware. Before updating system firmware, plea se make sure the product model and firm ware version are correct.
71 3.8.5. Change Logo You can choose your own picture to display on t he login pag e of FNS-5 000B. The size of the picture cannot exceed 20K bytes..
72 3.8.6. Remote Replicat ion (Disaster Recovery) Remote Replication enable s you to repli cate files on FNS-5000B to another FNS-5000B or LevelOne NAS series. The files will be compressed befor e the replication pr ocess in order t o save time for data transfer .
73 b. Compl ete all setting s and click OK to save or Cancel to quit. Note: T o use remote replication, enabl e Microsof t Net w orking service, make sure the destination network share and directo ry have been created, and the user name and pa ssword are valid to login the destination folder .
74 ii. Edit a. Select the t ask to be edited. b. Click Edit . c. Modify the settings. d. Click OK to save or Cancel to quit. iii. Delete a. Select the t ask to be deleted.
75 3.8.7. Backup/ Rest ore/ Reset Settings • To backup all settings, including user accoun ts, server name a nd n etwork configuration etc., click Backup an d select to open or save the setting file. • To restore all settings, click Browse to select a previously saved setting file and click Restore to confirm.
76 3.9. Event Logs FNS-5000B can store thousands of re cent event logs, in cluding warning, error a nd information messages. In case of system malf unction, event logs can b e retri eved to analyze system problems.
77 4. Copy USB Ports Data Directly FNS-5000B supports di re ct copy of data on U SB devices to FNS-5000B by using the Copy button. To use this function, please follow the steps below: 1. Make sure a SA T A disk is installed correctly in FNS-5000B according to the instruction s in Chapter 2.
78 5. Multimedia Station FNS-5000B provides a user-friendly we b manage ment interface for you to manage personal albums easily . Y ou can view images and multim edia files, or browse ph otos by thumbnails preview . A. Upload photos by web administration 1.
79 3. Click on the top right hand corner . Login with administrator name and password to manage Multimedia S tation. Users without adm inistration right can view the photos and multimedia files on Multimedia S tation but they do not have the right to modify the files.
80 B. Upload photos to Qmultimedia folder directly Y ou can upload multimedia files to FNS-500 0B directly by the following step s. 1. Use Run function in Windows. Enter [serve r name] or [server IP] to access share folder on FNS-5000B. 2. Open the folder Qmultimedia.
81 Buttons on Multimedia S t ation page Sort files by name Sort files by size Sort files by date Return to previous p age Return to Home Create folder Rename file or folder Select all Select none Dele.
82 Vie w Photo Information 1. T o view detailed inform atio n of a phot o, click on the thumbnail of the picture. 2. The information of the photo, e.g. file name, resolution, size, camera produ ce r will be shown on the right. Y ou can enter a descript ion for the picture in the box below the photo and click Submit .
83 Buttons Description Y ou can use the buttons on top of the photo to manage the album. Back to previous level Previous image Next image Rotate image anticlockwise Rotate image clockw ise Zoom in Zoom out Play slideshow . Select the time interval in seconds.
84 6. Download Station FNS-5000B support s P2P download mechanism. Y ou can add download t ask to FNS-5000B and let the server finish downloading ind epen dent of PC. Note: Please be warned against illegal downloadi ng of copyrighted materials. The Download S tation functionality is provided for downloading authorized files only .
85 2. Click on the link http://FNS -5000B IP/Qdownload on Download S tation page or click Download S tation on the login page of FNS-5 000B t o access Download S tation.
86 3. Click Add new download task on the lef t and upload a torrent file. Y ou can download legal torrent files by searching on the Internet. There are websites that provide legally sharing torrents e.g. www .legaltorrents.com . Please do wnload the torrent files to your local disk and then upload them to FNS-5000B.
87 5. Y ou can select an available download task and cli ck Set Share T ime to configure the time for sharing the torrent file, or click Set Config to set the maximum number of downloads at the same time (default value is 3).
88 6. T o p ause a running download ta sk, select the t ask in V iew Run list and click Pause/ Rest art download task. Y ou can view tasks that are p aused or finished in V iew Pause List and V iew Finish List respectively . T o rest art a paused t a sk, select the task in V iew Pause List and click Pause/ Restart download t ask.
89 8. T o delete a running, p aused, or finished t a sk, sel ect the t ask and click Delete download task. Y ou can select to remove the download t ask only and ret ai n the downloaded files, or remove the task a nd do wnloaded files. 9. T o logout Downlo ad S tation, click on the top right hand corner .
90 Dump Diagnostic Information T o view the diagnostic deta ils of a downl oad ta sk, select a t ask on the list and click [Dump Diagnostic Information].
91 7. Web Server FNS-5000B enables you to upload web pages and m anag e your own website easily by Web Server function. It also support s PHP and SQLite for you to establish an interactive website. Once you activate Web Server function, you can a c ce ss your own homepag e from anywh ere.
92 The file index.html or index.htm will be the home p ath of your webpage. 3. Click on the link http://FNS-5000B IP/ on Web Se rver p age or click Web Server on the login page of FNS-5000B to access the web p age you upload.
93 SQLite Management SQLiteManager is a multilingual web-based t ool to manage SQLite databa ses and can be downloaded from http://www.sqlitem ana ger.org/. Please follow the steps below or refer to the INSTALL file in the downloaded SQLiteManager- *.
94 8. FTP Server FNS-5000B supports FTP servi ce. To us e FTP service, enable this function in Network Settings and follow the steps below: 1. Open an IE browser and ent er f t p://[FNS-5000B I P] or ftp://[FNS-5000B name]. OR 2. By Web File Manager of FNS-5000B.
95 B. Click FTP . C. Enter the user name and p assword to lo gin FTP service. D. Y ou can start to enjoy FTP servi ce..
96 9. Web File Manager Using Web F ile Manager T o use Web File Mana ger , enable web service in Network Settings first. Launch the web browse r and go to FNS-5000B administratio n page. Select We b File Manager and enter the correct login name and p assword.
97 Select an existing network share. Y ou can organize share folders of FNS-5000B. With W eb File M anager , you can upload, rename, or delete files and folders in the network shares. Vie w files online Click on a file displayed on the web page. The information of the file will be shown.
98 Rename file or folder i. Select a file or folder to rename. ii. Click (Rename) on the toolbar . iii. Enter the new file or folder name and click OK. Delete file or folder i. Select a file or folder to del ete. ii. Click (Delete) on the toolbar . iii.
99 Vie w ing Files Named in Local Language T o view files named in Chinese, you may have to configure the bro wser settings. T ake Internet Explorer as an example, follow the steps bel ow to co nfigure the settings. 1. Click on To o l s in IE browser .
100 Web File Manager Icon s Icon Description Return to the parent folder Refresh the current page Return to network share list home page Create folder Rename file or folder Delete file or folder Selec.
101 10. Maintenance FNS-5000B is specially de signed to run 24x7 and be ready at all times against system crash caused by power out age. This section provid es a general overview on sy stem maintenance. 10.1. Rest art/ Shut down Server Follow the steps belo w to restart or shut down F NS-5000B.
102 10.3. Disk Failure or Malfunction When you encounter disk malfunctio n or failure, please do the following: 1. Record the malfunction status or e rror m essages shown in Event Logs. 2. S top using the failed FNS-5000B and turn of f the server . 3.
103 11. Appendix - Quick Install Wizard Main Screen Y ou can configure NAS by select NAS on list and click Configure , Login window pop-up and ask login name and p assword Upon successful login, the following screen will appear . Enter the configuration values and click OK.
104 For further configuration of the system, pleas e login th e admini stration page of F NS-5 000B via web browser . Note: Y ou may have to restart FNS-5000 B after changi ng the netwo rk configuration. Set the name, date and time for FNS- 5000B. The length cann ot exceed 14 characte rs.
105 Vie w Details Select a FNS-5000B available on Qui c k Inst all Wizard and click Det ails. The following screen will be shown:.
106 Map Drive Select a NAS and click Map Drive. Select the correct network sha re and click Map Network Drive. Then select the drive letter for the connection.
107 Refresh Search for all available NAS again. T o refresh t he search result s, click Refresh to display all available servers within the network. Help If you have any enquiries about Quick Inst all Wiza rd when using the program, you can click the Help button to view the help text.
108 Enter the homep age Double click on NAS to enter the admini stration p age..
Een belangrijk punt na aankoop van elk apparaat LevelOne FNS-5000B (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen LevelOne FNS-5000B heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens LevelOne FNS-5000B vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding LevelOne FNS-5000B leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over LevelOne FNS-5000B krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van LevelOne FNS-5000B bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de LevelOne FNS-5000B kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met LevelOne FNS-5000B . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
