NL
LevelOne logo
Officiële handleiding

LevelOne FPS-3003

45 pagina's·2.7 MB·Netwerkkaart·PDF·ENJA
LevelOne FPS-3003
Inhoudsopgave 18 secties LevelOne · FPS-3003 · Quick Install Guide · English · … TonenVerbergen
Page 1 of the LevelOne FPS-3003 user manual — LevelOne
Pagina 1 · klik om te vergroten
Pagina 1
LevelOne FPS-3003 — LevelOne diagram (page 1)
Afb. 1 · LevelOne

LevelOne

FPS-3003

Quick Install Guide

English

Deutsch

Nederlands

Italiano

Español

Português

Français

Ελληνικά

2-port USB/MFP Server

Page 2 of the LevelOne FPS-3003 user manual — LevelOne
Pagina 2 · klik om te vergroten
Pagina 2
LevelOne FPS-3003 — LevelOne diagram (page 2)
Afb. 2 · LevelOne

Power Link Status USB1 USB2

LevelOne FPS-3003 — LevelOne diagram (page 2)
Afb. 3 · LevelOne
Show 8 more labels / short text on this page
Power Adaptor Connector · USB Port 1 · USB Port 2 · Init Button · Ethernet Connector · Fig1 physical description · Indicators · Fig2 Autorun
Page 3 of the LevelOne FPS-3003 user manual — LevelOne
Pagina 3 · klik om te vergroten
Pagina 3
LevelOne FPS-3003 — LevelOne diagram (page 3)
Afb. 4 · LevelOne

Fig3 MFP Server Control Center software

LevelOne FPS-3003 — LevelOne diagram (page 3)
Afb. 5 · LevelOne

Fig 4 Set Server name and code page.

Page 4 of the LevelOne FPS-3003 user manual — LevelOne
Pagina 4 · klik om te vergroten
Pagina 4
LevelOne FPS-3003 — LevelOne diagram (page 4)
Afb. 6 · LevelOne

Fig5 TCP/IP setting of FPS-3003

LevelOne FPS-3003 — LevelOne diagram (page 4)
Afb. 7 · LevelOne
LevelOne FPS-3003 — LevelOne diagram (page 4)
Afb. 8 · LevelOne

Fig 7 Printer setting

Fig6 Add printer

Page 5 of the LevelOne FPS-3003 user manual — LevelOne
Pagina 5 · klik om te vergroten
Pagina 5
LevelOne FPS-3003 — LevelOne diagram (page 5)
Afb. 9 · LevelOne

Fig 8 Network Scan button

LevelOne FPS-3003 — LevelOne diagram (page 5)
Afb. 10 · LevelOne

Fig 9 Scanner interface

Page 6 of the LevelOne FPS-3003 user manual — Connect the FPS-3003
Pagina 6 · klik om te vergroten
Pagina 6

English

Congratulate on your purchase of this LevelOne FPS-3003, 2-port USB/MFP server. This document describes the steps for installation and configuration of FPS-3003 as a Print/File/Scan server in Windows environment. Refer to the User’s Manual in the bundled CD-ROM for more details. This Setup Guide is only for Windows users. If you use FPS-3003 in Unix/Linux, please refer to the User’s Manual in the bundled CD-ROM for more details.

Package Contents

  • If any item is missing, please contact the vender.
  • One FPS-3003 USB/MFP Server.
  • One FPS-3003 MFP Control Center Software CD.
  • One AC Adaptor.
  • This Quick Installation Guide.

OS Requirements

  • Windows 98 SE/ME/2000/XP/2003
  • HP-UX, Unix, Linux and RFC-1179 LPD System

Connect the FPS-3003

Please refer to Fig1, physical description. 1. Connect FPS-3003 to the network, such as a LAN switch or a LAN hub, using a LAN cable. 2. Connect FPS-3003 to USB printers, hard drives, flash ROM disks, or HP OJ (Office Jet) series printers (MFP) using USB cables. 3. Connect FPS-3003 to the power jack using the power adaptor (included in this package).

Page 7 of the LevelOne FPS-3003 user manual — Configure FPS-3003 with Utility
Pagina 7 · klik om te vergroten
Pagina 7

Install Utility

1. Insert the included CD-ROM (FPS-3003 USB MFP Server Product CD) into the personal computer. The autorun screen as Fig2 should appear 2. Click Install Product button. 3. Click Next , if you see any Next button in installation windows. 4. Click Finish .

Configure FPS-3003 with Utility

Using Control Center Software(Fig3):

i. Open the FPS-3003 Control Center. It will automatically search the existing servers and display their status. ii. Select the server that you want to configure. Double click the selected server and enter Administrator (default: admin) and Password (default: admin). iii. Name your FPS-3003 server and select a code page for file server function as Fig4. Please enter server’s host name and workgroup for Windows networking by SMB protocol. If you want to use the file server function, you have to set the same code page as that your Windows PC is using. iv. Assign IP address to FPS-3003 as Fig5. Please choose the one method to set the IP address of the server. You can automatically get IP by using DHCP or manually assign an IP to the server.

Page 8 of the LevelOne FPS-3003 user manual — Set up Printers
Pagina 8 · klik om te vergroten
Pagina 8

Set up Printers

Before processing the printer settings, please make sure that you have installed the accordingly printer driver in your local computer.

You can set up your network printer using steps below. Step 1 Set up Local Window Printer Driver. Step 2 Connect your printer to MFP server Step 3 Connect MFP server to network. Step 4 Turn on your printer and MFP server Step 5 Configure your MFP server. Step 6 Add Network Printer by standard windows add printer wizard or PC user software. Note:. If you use the HP Office Jet series printer, you are advised to connect the MFP to PC before installing the driver Add Network Printer

Use Add Printer Function of User Software

1. Start MFP Control Center, select your MFP server and click Add Printer.(Fig 6) 2. Select USB1 Port or USB2 Port in Add printer box, choose to use IP Address or Host Name to represent MFP Server in printer port, and select Printing with LPR (Line Printer Remote) or Print with Network Path(SMB) in Select the network printing protocol box.(Fig 7) # LPR protocol is compatible for windows 2000/XP /2003. SMB protocol is compatible for windows 98SE /ME/2000/XP/2003. By SMB protocol, the PC recognize the printer by printer name, which allows you to connect the printer in USB1 or USB2 port as you need.

# If your server is running on a different LAN than your Windows PC such as wireless Windows PC, you must choose IP address in IP Address or Host Name box.

Page 9 of the LevelOne FPS-3003 user manual — Set up Printers
Pagina 9 · klik om te vergroten
Pagina 9
3. Click Apply . 4. Select the desired printer driver and click Set Port to Printer . 5. Click OK . 6. If you cannot find any printer driver in Printer List, please install your printer driver first or click Add New Printer to install the printer driver.

- File System: This product supports a file format of FAT12/16/32. It will not support a drive formatted by NTFS, etc. - Naming Your Storages: The local drives of the two storages in USB1 port and USB2 port are named as USBx_DxPx, where USBx represents the USBx port, Dx represents the the x-th Disk and Px represents the x-th partition. - Setting MFP Server Codepage: MFP Server supports Windows code pages. If you want to communicate files with FPS-3003 MFP server, you have to set your MFP server code page to be same as the code page that your Windows PC is using.

- Using SMB Method for Sharing Storages

1. Connect a USB storage device to this product. 2. Select My Network Places 3. Click Display the Computers of Workgroup 4. Double click Microsoft Windows Network icon. 5. Double click the Workgroup that MFP server belongs to. The default Workgroup name is “LevelOne”. You can refer to MFP Control Center or server’s web pages to get it. You will see that the MFP server will be displayed as the default host name "FPS-3003" or the host name that you set. 6. If you can not find Workgroup name of MFP server in

Use File Sharing

Page 10 of the LevelOne FPS-3003 user manual — Use Network Scanning Function
Pagina 10 · klik om te vergroten
Pagina 10

Microsoft Windows Network, you can select Search Computer in My Network Places and type the server’s hostname or IP address (ex, default host name “FPS-3003” ) to find it. 7. Double click this host name icon. The folders will be displayed as USB1_DxPx, and USB2_DxPx where Dx represents the x-th disk and Px represents the x-th partition with respect to USB1 port and USB2 port . 8. Double click the one of folders to open the folders over the network.

- Using FTP Method for Sharing Storages

1. Open Microsoft IE 2. In Web Address List , type command: “ftp://server’s host name “ or “ftp:// server’sIP address ”. If you have changed the default FTP port : 21, you have to add the new port number in the tail of command as “ftp://server’s host name:ftp port” or “ftp:// IP address of server: ftp port ” 3. The shared folders will be listed in IE. 4. Perform Paste, Remove or Copy the files to the shared folders.

Use Network Scanning Function

1. Connect HP Office Jet series printer (MFP) to the server. Please refer to User’s Manual for more details. 2. Open the User software: MFP Control center and select your FPS-3003 that the MFP is connecting. 3. Click Network Scan button and use the scanner. (Fig 8) 4. Use Windows applications such as MS Word or Photoshop as Fig 9. For other further functions, please refer to the user`s manual in the CD.

Vraag stellen over de LevelOne FPS-3003

Eigenaren en ons team reageren doorgaans binnen een dag — en uw vraag helpt ook de volgende persoon.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
Nog geen vragen over de LevelOne FPS-3003

Stel als eerste een vraag — andere eigenaren of ons team geven antwoord.

Origineel document

LevelOne FPS-3003 handleiding-pdf

45 pagina's·2.7 MB·Netwerkkaart·PDF
Klik op een bovenstaande pagina om deze hier te openen
Pagina 1 / …
100%
Pagina's laden…