Gebruiksaanwijzing /service van het product AM3Plus van de fabrikant Linear
Ga naar pagina of 20
AM3Plus Access Controller (760) 438-7000 • FAX (760) 438-7043 USA & Canada (800) 421-1587 & (800) 392-0123 Toll Free FAX (800) 468-1340 www.linearcorp.com PRINTER’S INSTRUCTIONS: INSTR,INSTL,AM3PLUS - LINEAR P/N: 227542 A - INK: BLACK - MA TERIAL: 20 LB.
2 Contents Introduction The AM3Plus Access Controller is designed for use as a primary access control device f or gated communities, parking garages, offi ce buildings , apar tments, dormitories, hotels/motels, commercial buildings and recreational facilities .
3 Har dware Features ✓ FOUR FORM “C” (N.O. & N.C) RELAYS Each relay has 3-amp @ 24-volt rating with a status indicator and relay latching pushbutton ✓ FOUR REQUEST-TO-EXIT INPUTS Activates.
4 Accessor y Over view PBUS Accessories Sev eral compatible accessories are av ailable to connect to the two 6- wire communications “PBUS” inputs . Up to six PBUS accessories can be used with each AM3Plus unit. AM-RRR R emote Radio Receiv er For wireless tr ansmitters, connect the Model AM-RRR high-gain superheterodyne UHF receiver .
5 Component Locations POWER INDICATOR RE S ET BUTTON ENTER BUTTON S TATU S /PROGRAM DI S PLAY ARROW BUTTON S S TATU S INDICATOR S RELAY INDICATOR S (4) RELAY LATCH BUTTON S (4) AM-MIO INTERFACE CONNEC.
6 Wiring Diagram ELECTRIC DOOR S TRIKE DOOR S TRIKE POWER S UPPLY GATE OPERATOR OPEN GATE EXIT LOOP S EN S OR MAGNETIC DOOR LOCK DOOR LOCK POWER S UPPLY DOOR EXIT REQUE S T BUTTON "A" DOOR &.
7 Impor tant Mounting Requir ements The AM3Plus Access Control System can be installed f or public or private use. The mounting requirements for remote k eypads will v ar y depending on the installation. Revie w the follo wing information before star ting the installation.
8 AM3Plus Mounting Standard Cabinet The AM3Plus cabinet is designed to be mounted directly to a wall or fl at surface . Wiring access for pow er, telephone , ear th ground, control output must be av ailable at the mounting location. For easier wiring, choose a well lit location.
9 Rela y Output Wiring Any of the f our relay outputs channels (A-D) can be used to control access devices on doors or gates . Door or Pedestrian Gate Control 1. Install a low v oltage electr ic door strike or magnetic lock as a locking de vice for the door or pedestrian gate.
10 P ower, Bat ter y, & Gr ound Wiring Power Wiring ✦ NO TE: DO NO T APPL Y PO WER UNTIL THE IN S T ALLA TION I S COMPLETE. TURN MA S TER PO WER S WITCH OFF BEFORE WIRING. 1. Route two wires between the AM3Plus and the po wer transformer . • F or power wire runs up to 100 feet, use 18 A WG, 600-volt insulated wire.
11 T elephone Wiring For prog ramming, the AM3Plus connects to a standard telephone line. ✦ NO TE: The optional Model ACM-1 modem is required f or telephone communications to the AM3Plus controller . Impor tant T elephone Wiring Tips • DO NO T ROUTE TELEPHONE AND AC WIRING INSIDE THE SAME CONDUIT .
12 Wiegand Accessories The two AM3Plus Wiegand inputs (READER A & B) can connect to a large variety of 26, 30, and 31-bit Wiegand output accessories. The Wiegand format is a common standard f or access control equipment. A typical application would be to add s wipe card or proximity readers to the system.
13 Optional Net work Connections Linear’ s AM3Plus, AE1000Plus, & AE2000Plus Access Control Systems can be connected together in a network. A network will allow sharing programming and user inf or mation between the systems. Program each unit to a different netw or k Node Address (see P age 16).
14 Optional Net work Connections (Continued) Network Confi guration for AccessBase2000 Programming If the system is going to be programmed using Linear’ s AccessBase2000 software, units comm unicate with each other on the network through RS-485 cable connections .
15 Optional Net work Connections (Continued) RS-485 Networ k Wiring Network wiring conforms to 3-wire RS-485 electr ical specifi cations. Units connected in the network can be wired using one unit as a “hub” or by wiring from one unit to the next in “daisy-chain” f ashion.
16 Sys tem Contr ols Pushbuttons Refer to the fi gure f or the location of each of the eight pushbuttons. • UP button adds one to the v alue on the ST A TUS/PROGRAM display . • DO WN button subtracts one from v alue on the ST A TUS/PROGRAM displa y .
17 Sys tem Diagnos tics Sev eral indicators on the AM3Plus are f or monitor ing the system during operation. When calling f or technical assistance, Linear’ s T echnical Services Depar tment ma y ask the installer to use these indicators to diagnose the system.
18 Specifi cations MECHANICAL Case dimensions: 11.5” W x 12.5” H x 3.5” D ELECTRICAL V oltage: 16-24 V olts AC or 12-24 V olts DC Current: 850 mA maximum @ 12 V olts DC Backup Battery: 12 V olt.
19 Linear Limited W arrant y This Linear product is warranted against def ects in material and workmanship for tw enty-four (24) months. This warranty extends only to wholesale customers who buy direct from Linear or through Linear’ s normal distr ibution channels .
Copyright © 2007 Linear LLC 227542 A.
Een belangrijk punt na aankoop van elk apparaat Linear AM3Plus (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Linear AM3Plus heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Linear AM3Plus vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Linear AM3Plus leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Linear AM3Plus krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Linear AM3Plus bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Linear AM3Plus kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Linear AM3Plus . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
