Gebruiksaanwijzing /service van het product LT-800-150 van de fabrikant Listen Technologies
Ga naar pagina of 28
.
.
Dear Valued Customer, Thank you for choosing Listen! All of us at Listen are dedicated to providing you with the highest quality products available. We take great pride in their outstanding performance because we care that you are completely satis fi ed.
.
1 Package Contents 3 150 MHz Speci fi cations 4 Block Diagram 5 Quick Reference 6 Setup Instructions 7 Operating Instructions 10 Audio Control 11 Listen SQ™ (Super Quiet) 12 RF Reception Maximizati.
.
3 LT-800 Package Contents Optional Accessories See pages 19-20 Listen Part Number LT-800-150 (150 MHz) LT-800 Contents • LT-800-150 (150 MHz) • 12 VDC Power Supply • User Manual • Quick Refere.
4 LT-800 Speci fi cations Architectural Speci fi cations The stationary FM transmitter shall be capable of broadcasting on 32 channels. The transmitter shall have an SNR of 80 dB or greater. The output power shall be adjustable to quarter, half or full.
5 In-Line Power Supply LA-201 (provided) 115VAC6 0 Hz Top Mounted Antenna Stud BNC Listen LCD Display Backlighted HEADPHONE 3.5MM Stereo 15VAC, 1A Transmitter RF Board Power Supply CPU Module SQ Compa.
6 Adjust audio input levels of Input 1 and Input 2 here. See page 11 for more information. Indicates audio input level of Input 1 and Input 2. Shows mixed audio level. Indicates Process Mode is active. LCD: Shows which channel is selected. Monitor Port: Plug in a headset and adjust volume.
7 LT-800 Setup Instructions Coax antenna connection. Rear of LT-800 shown. LA-132 Remote Antenna See RF Reception Maximization Strategies and Coaxial Cable on page 13. 1 2 3 Unpack the Product Remove outer packaging and plastic cover. Inspect for physical damage.
8 LT-800 Setup Instructions (cont.) Set SQ™ (Super Quiet) and Process Features Your transmitter is shipped to you with SQ (super quiet) enabled and Process disabled. For a detailed description of these features and when to use them, please refer to page 12.
9 - + XLR Wiring 1/4” Phone Wiring Back of LT-800 with XLR connected to Input 1 Line Mic Mic with Phantom Power LT-800 Setup Instructions (cont.) Connect Audio Inputs The LT-800 has two audio input options: Input 1 and Input 2. Input 1 is a balanced connection using either an XLR or 1/4” phono connector.
10 LT-800 Operating Instructions Press Test Tone button here Channel Select UP and DOWN buttons 1 Power Unit On Turn power on by pressing the power button. Select a Channel Select the transmit channel by pressing the channel select UP and DOWN buttons.
11 Adjust Mix Level Adjust the mix level until the right VU meter occasionally illuminates the red LED. This is the level adjustment for the combined output from Input 1 and Input 2. 1 Adjust Audio Input Level Adjust the input knob counterclockwise to add gain to Input 1.
12 People are accustomed to listening to low noise, high fidelity audio (delivered via CD, DVD, etc.). FM radio systems, such as those made by Listen, have more inherent noise compared to most sound systems. To minimize noise, Listen uses a noise reduction technology called ListenSQ™.
13 The antenna for the LT-800 can be mounted directly on the unit if desired. However, you may find that the unit will provide better performance when the antenna is located elsewhere. If you plan to mount the antenna in a different location other than the top of the unit, you must use cable and connectors rated at 50 ohms.
14 It is important to choose channels that are free from interference to achieve proper operation of your Listen equipment. This process is trial and error. Before turning on the transmitter, listen to the wide band channels on the receivers (channels 1-6).
15 150 MHz Frequency Chart Channel Frequency 01 150.900 02 152.400 03 151.500 04 152.100 05 151.200 06 151.800 07 150.850 08 150.950 09 151.000 10 151.050 11 151.100 12 151.150 13 151.250 14 151.300 15 151.350 16 151.400 17 151.450 18 151.550 19 151.600 20 151.
16 LT-800 Troubleshooting Troubleshooting The LT-800 has no power Make sure the LA-207 power supply is connected to a power source and is connected to the jack marked “Power Input”.
17 LT-800 Troubleshooting (cont.) Troubleshooting There is not sufficient range First make sure that the receivers you are using are operating properly, then make sure that you have an antenna connected either to the top of the LT-800 transmitter or connected to the back of the unit (but not both!).
18 Warranty & Contacting Listen Warranty Listen Technologies Corporation (Listen) warrants its transmitters and receivers (LT-82, LT-700, LT-800, LR-42, LR-44, LR-400, LR-500) to be free from defects in workmanship and material under normal use and conditions for the useful lifetime of the product from date of purchase.
19 Optional Accessories Antenna Accessories LT-800 Rack Mount Accessories Includes components for single and dual rack configuration and a security cover NOTE: Rack mounted units cannot use the LA-134 top mounted antenna.
20 Optional Accessories (cont.) Cable & Connectors Accessories Microphone Accessories NOTE: To use Listen microphones you must use a converter (LA-280) to adapt the 3.5 mm connection to a 1/4” phono connection. LA-127 RG-58 BNC Connector LA-128 RG-8 BNC Connector LA-112 RG-58 50 Ohm Coaxial Cable (per ft.
21 Notes.
22 Notes.
23 Notes.
Listen Technologies Corporation 14912 Heritagecrest Way Bluffdale, Utah 84065-4818, U.S.A. +1.801.233.8992 1.800.330.0891 North America +1.801.233.8995 fax www.
Een belangrijk punt na aankoop van elk apparaat Listen Technologies LT-800-150 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Listen Technologies LT-800-150 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Listen Technologies LT-800-150 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Listen Technologies LT-800-150 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Listen Technologies LT-800-150 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Listen Technologies LT-800-150 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Listen Technologies LT-800-150 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Listen Technologies LT-800-150 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
