Gebruiksaanwijzing /service van het product NR1504 van de fabrikant Marantz
Ga naar pagina of 146
Owner’ s Man ual A V Sur r ound Receiv er NR1504 Basic instructions Advanced instructions Information DVD.
I n SAFETY PRECAUTIONS CA UTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
II n NO TES ON USE WARNINGS • Avoid high temperatures. Allow for sucient heat dispersion when installed in a rack. • Handle the power cord carefully. Hold the plug when unplugging the cord. • Keep the unit free from moisture, water, and dust.
1 Thank you for purchasing this Marantz product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading this manual, be sure to keep it for future reference.
2 Features With discrete circuit technology, the power amplifier provides identical quality for all 5 channels (50 Watts x 5 channels) For optimum realism and stunning dynamic range, the power amplifier section features discrete power devices (not integrated circuitry).
3 Cautions on handling • Before turning the power on Check once again that all connections are correct and that there are no problems with the connection cables. • Power is supplied to some of the circuitry even when the unit is set to the standby mode.
Basic instructions 4 F Connections v page5 F Setup v page23 F Playback (Basic operation) v page30 F Network content v page47 F Selecting a listening mode (Sound Mode) v page72 For speaker connections, see page79 . Basic instructions Here we explain the connections and basic operation methods for this unit.
5 Important information Make connections before using this unit. To create a home theater that can play back higher quality video and audio by fully utilizing the capabilities of this unit and your video devices, connect this unit to each of your video devices with HDMI cables.
6 Important information Relationship between video signals and monitor output This unit is equipped with two types of video input connectors (HDMI and composite video) and two type of video output connectors (HDMI and composite video).
7 Connecting HDMI devices You can connect up to seven HDMI-compatible devices (6-inputs/1-output) to the unit. If the device connected to this unit is equipped with an HDMI connector, it is recommended to use HDMI connections. Connections with an HDMI cable oer the following benefits that can not be achieved with other connection methods.
8 Connecting HDMI devices n About ARC (Audio Return Channel) function This function plays TV audio on this unit by sending the TV audio signal to this unit via the HDMI cable.
9 Connecting HDMI devices Connecting this unit to a TV via HDMI connections Cables used for connections Audio and video cable (sold separately) HDMI cable • This interface allows transfer of digital video signals and digital audio signals over a single HDMI cable.
10 Connecting HDMI devices OUT HDMI G Front panel H Video camcorder • When connecting a device that supports Deep Color, please use a “High Speed HDMI cable” or “High Speed HDMI cable with Ethernet”. • Video signals are not output if the input video signals do not match the display’s resolution.
11 Connecting HDMI devices n About Content Type This function was added with the HDMI standard. It automatically makes settings suitable for the video- output type (content information).
12 Connecting other devices For highest quality video and surround playback, it is recommended to use an HDMI cable to connect this unit to TV and other video devices ( v page7 “Connecting HDMI devices”). This section describes alternate connection methods when your device does not support HDMI connections.
13 Connecting a TV • This section describes how to connect when your TV does not support ARC (Audio Return Channel). For instructions on HDMI connections, see “Connecting this unit to a TV via HDMI connections” ( v page9 ). • To listen to TV audio through this unit, use the optical digital connection.
14 n Audio connection The following methods are available for connecting to this unit. Use either of the methods to make a connection. The numbers prefixed with connectors indicate the recommendation order. The smaller the number is, the higher playback quality is achieved.
15 Connecting other devices Connecting a Blu-ray Disc player or DVD player This section describes how to connect when your Blu-ray disc player or DVD player that does not support HDMI connections. For instructions on HDMI connections, see “Connecting HDMI devices” ( v page7 ).
16 Connecting other devices Connecting a media player This section describes how to connect when your media player does not support HDMI connections. For instructions on HDMI connections, see “Connecting HDMI devices” ( v page7 ).
17 Connecting an iPod or USB memory device to the USB port • You can enjoy music stored on an iPod or USB memory device. • For operating instructions see “Playing an iPod” ( v page 32 ) or “Playing a USB memory device” ( v page35 ).
18 Connecting other devices Connecting a CD player You can enjoy CD sound with the player connected by digital or analog cables. R L R L a A UDIO A UDIO R L OUT CD player n Audio connection The following methods are available for connecting to this unit.
19 Connecting an FM/AM antenna • Connect the FM antenna supplied with the unit to enjoy listening to radio broadcasts. • After connecting the antenna and receiving a broadcast signal ( v page 38 “Listening to FM/AM broadcasts”), fix the antenna with tape in a position where the noise level becomes minimal.
20 Connecting other devices Connecting a wireless receiver (RX101) • You can connect a wireless receiver (RX101, sold separately) to play back music on your Bluetooth device with this unit. • To do this, switch the input source to “M-XPort” ( v page30 “Selecting the input source”).
21 Connecting to a home network (LAN) You can connect this unit to your home network (LAN) to perform various types of playbacks and operations as follows.
22 Connecting the power cord After completing all the connections, insert the power plug into the power outlet. To household power outlet (AC 120 V, 60 Hz) Power cord (supplied) NOTE • Do not plug in the power cord until all connections have been completed.
23 The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. This is called “Audyssey ® Setup”. To perform measurement, place the Setup and measurement microphone in multiple locations all around the listening area.
24 2 Set up the subwoofer If using a subwoofer capable of the following adjustments, set up the subwoofer as shown below. For details, see your subwoofer’s manual. n When using a subwoofer with a direct mode Set the direct mode to “On” and disable the volume adjustment and crossover frequency setting.
25 Preparation (Continued) Detection & Measurement (Main) Set up speakers (Audyssey® Setup) 4 Select “Start” and then press ENTER . Audyssey Setup Connect the calibration microphone to the SETUP MIC input on the front the AV receiver. Back Next 5 Select “Next” and then press ENTER .
26 Calculation Set up speakers (Audyssey® Setup) 10 Repeat step 9, measuring positions 3 to 6. When measurement of position 6 is completed, a “Measurements Complete.” message is displayed. Audyssey Setup Measurements Complete. Calculation Repeat Last Test 11 Select “Calculation” and then press ENTER .
27 Set up speakers (Audyssey® Setup) 13 Select “Store” and then press ENTER . Save the measurement results. Audyssey Setup Now Storing... please wait... 75% Audyssey Setup Check processing result. To proceed, select “Store”. Speaker Config. Distances Levels Crossovers Store • Saving the results requires about 20 seconds.
28 Error messages NOTE • An error message is displayed if Audyssey ® Setup could not be completed due to speaker placement, the measurement environment, etc. If an error message is displayed, check the relevant items and perform the necessary measures.
29 Check Results This function enables you to check the measurement results and equalizer characteristics after Audyssey ® Setup. 1 Press SETUP to display the menu on the TV screen. 2 Use u to select “Speakers” – “Audyssey ® Setup” and then press ENTER or p .
30 Playback (Basic operation) Setup ( v page23 ) n Turning the power on ( v page30 ) n Selecting the input source ( v page30 ) n Adjusting the master volume ( v page31 ) n Turning o the.
31 Adjusting the master volume Use VOLUME df to adjust the volume. • The volume display method varies depending on the “Scale” setting ( v page96 ). n When the “Scale” setting ( v page96 ) is “0 – 98” G Adjustable range H 0.0 0.
32 Playing an iPod You can use the USB cable provided with the iPod to connect the iPod with the unit’s USB port and enjoy music stored on the iPod. For information on the iPod models that can be played back with this unit, see “Connecting an iPod or USB memory device to the USB port” ( v page17 ).
33 Playing an iPod n Setting operation mode (iPod Browse Mode) In this mode, various lists and screens during playback on the iPod are displayed on the TV screen. This section describes the steps up to playing back tracks on the iPod in “On-Screen”.
34 Playing an iPod n Performing repeat playback (Repeat) 1 Press OPTION with “iPod Browse Mode” set to “On-Screen”. The option menu screen is displayed.
35 Playing a USB memory device Playing back music or viewing still picture (JPEG) files stored on a USB memory device. Important information • Only USB memory devices conforming to mass storage class and MTP (Media Transfer Protocol) standards can be played on this unit.
36 Playing files stored on USB memory devices 1 Connect the USB memory device to the USB port ( v page17 ). 2 Press iPod/USB to switch the input source to “iPod/USB”. D&M1 D&M2 D&M3 Music1 Music2 Music3 Music4 OPTION USB [1/9] Option 3 Use ui to select the search item or folder, then press ENTER or p .
37 Playing a USB memory device n USB memory device operation buttons Operation buttons Function PAGE df Page search INFO Display of information such as the source name, volume, and sound mode name etc.
38 Listening to FM/AM broadcasts For antenna connections, see “Connecting an FM/AM antenna” ( v page19 ). How to tune in The modes for receiving FM broadcasts consists of “Auto” mode that automatically searches available broadcast stations and “Manual” mode that lets you tune in using buttons to change the frequency.
39 Listening to FM/AM broadcasts n Changing the screen display duration Make this setting at “Now Playing” ( v page 101 ) in the menu. The default setting is “Always On”. When “Auto O” is set, the on-screen display is turned o 30 seconds after an operation.
40 Listening to FM/AM broadcasts n Tuning in by entering the radio frequency (Direct Tune) You can enter the receiving frequency directly to tune in. 1 Press TUNER to switch the input source to “TUNER”. 2 Press OPTION . The option menu screen is displayed.
41 Listening to FM/AM broadcasts n Presetting the current broadcast station (Preset Memory) Your favorite broadcast stations can be preset so that you can tune them in easily. Up to 56 stations can be preset. 1 Tune in the broadcast station you want to preset.
42 Listening to FM/AM broadcasts n Changing the tuning mode (Tune Mode) You can change the mode for tuning into FM broadcasts. If you cannot tune in automatically with “Auto” mode, then change the mode to “Manual” and tune in manually. 1 Press TUNER to switch the input source to “TUNER”.
43 Listening to FM/AM broadcasts n Tuning in to radio stations and presetting them automatically (Auto Preset) Up to 56 stations can be preset. If “Auto Preset” is performed after performing “Preset Memory”, the “Preset Memory” settings will be overwritten.
44 Listening to FM/AM broadcasts n Specify a name for the preset broadcast station (Preset Name) You can set the name to the preset broadcast station or change it. Up to eight characters can be input. 1 Press TUNER to switch the input source to “TUNER”.
45 Listening to FM/AM broadcasts n Skipping preset broadcast stations (Preset Skip) You can set in advance, the stations you do not want to be displayed when tuning in, by groups or by stations. The preset skip setting is useful when tuning in, because only your favorite stations are displayed.
46 Listening to FM/AM broadcasts Cancelling preset skip 1 While the Preset Skip screen is displayed, use o p to select a group containing a broadcast station to cancel the skip for. 2 Use ui to select a broadcast station to cancel the skip for. G TV Screen H CH 3 FM 92.
47 Listening to Internet Radio Internet Radio refers to radio broadcasts distributed over the Internet. Internet Radio stations from around the world can be received. Important information The broad cast station types and specifications supported by this unit for playback are as follows.
48 Listening to Internet Radio n Adjusting the sound quality (M-DAX) Make this setting at “M-DAX” ( v page96 ) in the menu. You can use the M-DAX function to improve the fidelity of compressed audio sources such as content from Internet Radio stations.
49 Listening to Internet Radio n Using vTuner to add Internet Radio stations to favorites There are many Internet Radio stations in the world, and this unit can tune into these stations. But finding the radio station you want to hear may be dicult, because there are too many stations.
50 Playing back files stored on a PC and NAS This unit can play back music files and playlists (m3u, wpl) stored on a PC and on Network Attached Storage (NAS) that supports DLNA. Important information • The network audio playback function of this unit connects to the server using technologies shown below.
51 Playing back files stored on a PC and NAS Applying media sharing settings Here, we apply the settings to share music files stored on a PC and NAS on the network. n Sharing media stored in PC If you are using a Media Server, be sure to apply this setting first.
52 Playing back files stored on a PC and NAS Playing back files stored on a PC and NAS Use this procedure to play music files, image files or playlists. 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page 21 “Connecting to a home network (LAN)”).
53 Playing back files stored on a PC and NAS Operations available through the OPTION button Press the OPTION button to display a menu of functions that can be used on the TV screen. Select the function you want to use from this menu. You can easily find and use the desired function.
54 Using online services This unit supports playback of the online services shown below. n About Flickr ( v page55 ) Flickr is an online photograph sharing service that started in 2004. You can use the this unit to view photographs that have been made public by Flickr users.
55 Using online services Viewing photographs on the Flickr site You can view photographs shared by particular users, or all of the photographs shared on Flickr.
56 Using online services n Viewing all photographs on Flickr 1 Use ui to select “All Content”, then press ENTER or p . OPTION Flickr [1/2] Add Flickr Contact All Content Option 2 Use ui to select the folder, and then press ENTER or p .
57 Using online services Listening to Pandora® 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page 21 “Connecting to a home network (LAN)”). w If settings are required, make the “Settings” ( v page112 ).
58 Using online services Operations available through the OPTION button Press the OPTION button to display a menu of functions that can be used on the TV screen. Select the function you want to use from this menu. You can easily find and use the desired function.
59 Using online services n Listening to an existing station Use ui and select the radio station (“D&M2 Radio”) that you want to listen to, and press ENTER or p .
60 Using online services n Pandora operation buttons Operation buttons Function PAGE df Page search INFO Display of information such as the source name, volume, and sound mode name OPTION Video Select.
61 Using online services Listening to SiriusXM Internet Radio Over 120 channels of the SiriusXM programming you love, including commercial-free music plus sports, talk, news and entertainment. Listen anywhere on your computer or smartphone. 1 Prepare for playback.
62 Using online services n Sign out Disassociate this unit from your SiriusXM account. 1 Use ui to select “Sign Out”, then press ENTER or p . 2 When the popup menu appears, use o p to select “Yes”, then press ENTER .
63 Using online services Listening to Spotify Introduce your Marantz to a whole new world of music. With Spotify, you can enjoy instant access to millions of songs. A Spotify Premium subscription is required. For details, see the Spotify homepage. http://www.
64 Using online services 9 Press p while a track is playing. The Spotify menu screen is displayed. [1/3] Star this track Browse “Artist name” Browse “Album name” Track-Artist Back Star this track Adds a star to the selected track. Browse “Artist name” Displays the list of albums by the artist of the track that is being played back.
65 Convenient functions Here, we explain how to use convenient functions for NETWORK sources and USB sources. The source names under the titles of each function’s description are sources that allow use of these functions.
66 Convenient functions Performing random playback (Random) USB Media Server Spotify 1 While content is playing, press OPTION . The option menu screen is displayed.
67 Convenient functions Favorites function There are two ways to add content to favorites: q Add to favorites from the Option menu w Add to the FAVORITE STATION button n Add to favorites from the Option menu (Save to Favorite) Internet Radio Media Server You can add up to 100 items as favorites for all sources (Internet Radio and Media Server).
68 Convenient functions n Deleting content added to favorites (Remove from Fav.) 1 Press NETWORK . 2 Use uio p to select “Favorites”, then press ENTER . Favorites Internet Radio Media Server Spotify Network 3 Use ui to select the content you want to delete from favorites, then press OPTION .
69 Convenient functions 3 Use o p to select the Video Select mode. • Each time o p is pressed, the setting is changed as shown below. O ff On O Disable Video Select mode. On Enable Video Select mode. 4 If you selected “On” in step 3, press i and select “Source”.
70 AirPlay function Enjoy music from your iTunes library with high quality sound anywhere in your home. Use the Apple Remote App z for iPhone, iPod touch and iPad to control iTunes from any room in your home. z Available as a free download from the App Store.
71 AirPlay function n Perform iTunes playback operations with the remote control unit of this unit With this unit’s remote control unit, you can perform iTunes song play, pause, and auto search (cue) operations. 1 Select “Edit” – “Preferences.
72 Selecting a listening mode (Sound Mode) This unit allows you to enjoy various kinds of surround and stereo playback modes. Multi-channel audio formats are provided on popular movie and music disc f.
73 Pure Direct playback This mode is for playback with higher sound quality than in “DIRECT” mode, by turning o the front panel display panel, which can eliminate faint low level noise from creeping into sensitive analog circuitry. 1 Play the selected device ( v page31 – 63 ).
74 Selecting a listening mode n Listening mode • The following listening modes can be selected using the MOVIE , MUSIC , GAME , and PURE buttons. • Adjust the sound field eect with the menu “Surr.Parameter” ( v page94 ) to enjoy surround sound the way you like it.
75 Selecting a listening mode z 1 2-channel also includes analog input. z 2 When AUTO mode is selected, the sound mode that is compatible with the input signal is used for playback. z 3 This mode plays back 2-channel sources in 5.1-channel playback. It cannot be selected when headphones are used, or when only front speakers are used.
76 Selecting a listening mode n Description of listening mode types Dolby listening mode Listening mode type Description DOLBY PL g This mode can be selected when the Dolby Pro Logic g decoder is used to play back 2-channel sources in 5.1-channel surround sound with an enveloping surround sound experience.
Advanced instructions 77 F Installation/connection/setup of speakers (Advanced) v page78 F Installation/connection/setup of speakers (Advanced) v page82 F Playback (Advanced operation) v page.
78 Procedure for speaker settings Speaker installation Speaker connection ( v page79 ) Speaker installation • Determine the speaker system depending on the number of speakers you are using and install each speaker and subwoofer in the room. Here, we explain how to install the speakers using a typical example.
79 Speaker connection Here we connect the speakers in the room to this unit. This section explains how to connect them using typical examples. n Connecting 5.1-channel speakers ( v page81 ) n Connecting 2.1-channel speakers ( v page81 ) NOTE • Disconnect this unit’s power plug from the power outlet before connecting the speakers.
80 Speaker connection n About the speaker cable label (supplied) for channel identification The channel display section for speaker terminals on the rear panel is color-coded for each channel to be identifiable.
81 Speaker connection Connecting 2.1-channel speakers FL FR SW NOTE • For speaker cable connections, see page80 . • For speaker impedance, see page79 . Connecting 5.1-channel speakers FL FR C SL SR SW NOTE • For speaker cable connections, see page80 .
82 Connections (Advanced connection) Connecting the REMOTE CONTROL connectors Remotely connecting Marantz devices n Performing operations by RC on this unit without visual contact • You can conne.
83 Setup ( v page23 ) Playback (Basic operation) ( v page30 ) Selecting a listening mode (Sound Mode) ( v page72 ) n HDMI control function ( v page83 ) n Sleep timer function ( v page84.
84 HDMI control function If the HDMI control function does not operate properly, check the following points. • Is the TV or player compatible with the HDMI control function? • Is “HDMI Con.
85 Web control function You can control this unit from a web control screen on a web browser. • This unit and the PC need to be connected to the network properly ( v page 21 “Connecting to a home network (LAN)”) in order to use the web control function.
86 Web control function G Example 2 H Setup menu screen Video/HDMI Setup Video On Screen Display TV For mat Aut o Lip Sync On Off HDMI Audio Out AVR TV HDMI Pass Through Last CBL/SAT Blu-ray/DVD GAME .
87 Panel lock function To prevent accidental operation of this unit, you can disable operation of the buttons on the front panel. VOLUME X ON/ST ANDBY ST A TUS DISPLA Y M-DAX PRESET CH PRESET CH n Disabling all key button operations 1 Press X while you press and hold M-DAX and DISPLAY with the unit in standby mode.
88 Various memory functions Personal memory plus function This function sets the settings (input mode, sound mode, HDMI output mode, MultEQ ® , Dynamic EQ, audio delay etc.
89 Menu map For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page. By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences.
90 Examples of menu screen displays Typical examples are described below. G Example 1 H Menu selection screen (Top menu) Dialog Level Audio Subwoofer Level Surr.
91 Examples of menu and front display Below we describe typical examples of displays on the TV screen and on the set’s display window. Menu display Front display Description Top menu display Setup Menu Audio Video Inputs Speakers Network General Setup Assistant w w Audio q Press SETUP to display the menu screen.
92 Inputting characters On this unit, you can change the name displayed on the following screens to the names that you prefer. • Text Search ( v page65 ) • Preset Name ( v page44 ) •.
93 Audio Make audio-related settings. Menu operation 1 Press SETUP . The menu is displayed on the TV screen. 2 Use ui to select the menu to be set or operated. 3 Press ENTER or p to enter the setting. • To return to the previous item, press o or BACK .
94 Surr.Parameter Default settings are underlined. You can adjust the surround audio sound field eects to match your preferences. The items (parameters) that can be adjusted depend on the signal being input and the currently set sound mode. For details on the adjustable parameters, see “Sound modes and surround parameters” ( v page126 ).
95 Tone Default settings are underlined. Adjust the tonal quality of the sound. Setting items Setting details Tone Control Set the tone control function to “On” and “O”. On : Allow tone adjustment (bass, treble). O : Playback without tone adjustment.
96 Audio Delay Default settings are underlined. While viewing video, manually adjust the time to delay audio output so that the video and audio are synchronized.
97 Audio Audyssey Default settings are underlined. Set Audyssey MultEQ ® , Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ® . These can be selected after Audyssey ® Setup has been performed. For additional information on Audyssey technology, please see page130 .
98 Audio Manual EQ Default settings are underlined. Use the 9 band graphic equalizer to adjust the tone of each speaker. “Manual EQ” can be set when “MultEQ ® ” setting ( v page97 ) is “Manual EQ”. Setting items Setting details Speaker Select.
99 Video Make video-related settings. Menu operation 1 Press SETUP . The menu is displayed on the TV screen. 2 Use ui to select the menu to be set or operated. 3 Press ENTER or p to enter the setting. • To return to the previous item, press o or BACK .
100 Video HDMI Setup Default settings are underlined. Make settings for HDMI video/audio output. Setting items Setting details Auto Lip Sync Make automatic compensation for timing shift in audio and video output. On : Compensated. O : Not compensated.
101 Video On Screen Disp. Default settings are underlined. Select the on-screen display user interface preferences. Setting items Setting details Volume Sets where to display the master volume level. Bottom : Display at the bottom. Top : Display at the top.
102 Inputs Perform settings related to input source playback. • You do not have to change the settings to use the unit. Make settings when needed. Menu operation 1 Press SETUP . The menu is displayed on the TV screen. 2 Use ui to select the menu to be set or operated.
103 Setting items Setting details HDMI Set this to change the HDMI input connectors assigned to the input sources. CBL/SAT Blu-ray/DVD GAME AUX MEDIA PLAYER CD TV AUDIO 1 / 2 / 3 / 4 / 5 / Front : Assign an HDMI input connector to the selected input source.
104 Setting items Setting details DIGITAL Set this to change the digital audio input connectors assigned to the input sources. CBL/SAT Blu-ray/DVD GAME AUX MEDIA PLAYER CD TV AUDIO Coax (Coaxial) / Opt (Optical) : Assign a digital input connector to the selected input source.
105 Inputs Source Rename Change the display name of the selected input source. This is convenient when the input source name of your device and the input source name of this unit are dierent. You can change the name to suit your needs. When the renaming is completed, the name is displayed on this unit’s display and on the menu screen.
106 Speakers Set when changing Audyssey ® Setup settings. • If you change the speaker settings after performing Audyssey ® Setup, it will not be possible to set Audyssey MultEQ ® , Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ® ( v page97 ).
107 Manual Setup Default settings are underlined. Perform when setting the speakers manually or when changing settings made in Audyssey ® Setup. • If you change the speaker settings after performing Audyssey ® Setup, it will not be possible to select Audyssey MultEQ ® , Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ® ( v page97 ).
108 Setting items Setting details Crossovers Set the maximum frequency of the bass signal output from each channel to the subwoofer. Set the Crossover Frequency to suit the bass reproduction capability of the speaker being used. Speaker Select. : Selects how to set the crossover frequency.
109 Speakers Setting items Setting details Bass Set subwoofer and LFE signal range playback. Subwoofer Mode : Select low range signals to be reproduced by subwoofer. • LFE : The low range signal of the channel set to “Small” speaker size is added to the LFE signal output from the subwoofer.
110 Network To use this unit by connecting it to a home network (LAN), you must configure network settings. If you set up your home network (LAN) via DHCP, set “DHCP” to “On” (use the default setting). This allows this unit to use your home network (LAN).
111 Information Display network information. Setting details Friendly Name / DHCP On or O / IP Address / MAC Address MAC Address is required to make a vTuner account. IP Control Default settings are underlined. Enables network communication in standby power mode.
112 Network Settings Make settings for wired LAN. Only set “Settings” when connecting to a network without a DHCP function. Setting details Information Network IP Control Friendly Name Settings Diagnostics Maintenance Mode q DHCP Settings - IP Address - Subnet Mask - Default Gateway - Primary DNS - Secondary DNS Off 192 .
113 Network Diagnostics Used to check the network connection. Setting items Setting details Physical Connection Checks the physical LAN port connection. OK : Connected. Error : The LAN cable is not connected. Check the connection. Router Access Checks the connection from this unit to the router.
114 General Make various other settings. Menu operation 1 Press SETUP . The menu is displayed on the TV screen. 2 Use ui to select the menu to be set or operated. 3 Press ENTER or p to enter the setting. • To return to the previous item, press o or BACK .
115 General Language Default settings are underlined. Set the language for display on the menu screen. Setting details English / Français / Español “Language” can also be set by the following procedure. However, the menu screen is not displayed.
116 Information Show information about receiver settings, input signals, etc. Items Setting details Audio Show information about audio input signals. Sound Mode : The currently set surround mode. Input Signal : The input signal type. Format : The number of input signal channels (presence of front, surround, LFE).
117 Usage Data To help us improve our products and customer service, Marantz collects anonymous information about how you use your AV receiver (such as frequently used input sources and sound modes and speaker settings). Marantz will never provide any information we collect to third parties.
118 General Setting items Setting details Add New Feature Display new features that can be downloaded to this unit and perform an upgrade. NOTE In cases where it is not possible to connect to the network after adding a new function, connect to the network again using “Network” ( v page110 ).
Information 119 F Part names and functions v page120 F Other information v page125 F Troubleshooting v page132 F Specifications v page136 F Index v page137 Information Here we list other information related to this unit. Please refer to this information as needed.
120 Front panel For buttons not explained here, see the page indicated in parentheses ( ). q e r y u t Q4 w Q8 Q7 Q5 Q9 Q6 o i Q2 Q0 Q1 Q3 q Power indicator ·····················.
121 Display r e t y u i o Q0 q w q Information display The input source name, sound mode, setting values and other information are displayed here. w Input signal indicators e MUTE indicator This lights when the audio mute mode is selected ( v page31 ).
122 Rear panel See the page indicated in parentheses ( ). Q1 q w e r t y i Q0 o Q2 u q FM/AM antenna terminals (ANTENNA) ································ ( 19 ) w Analo.
123 Remote control unit For buttons not explained here, see the page indicated in parentheses ( ). q w e r t y u o Q5 Q7 Q3 Q2 Q1 Q4 Q6 Q0 i q SLEEP button ······················.
124 Remote control unit Inserting the batteries q Remove the rear lid in the direction of the arrow and remove it. w Load the two batteries properly as indicated by the marks in the battery compartment. R03/AAA e Put the rear cover back on. NOTE • Insert the specified batteries in the remote control unit.
125 Other information n Trademark information ( v page125 ) n Surround ( v page126 ) n Relationship between video signals and monitor output ( v page129 ) n Explanation of terms ( v page13.
126 Surround This unit is equipped with a sophisticated digital signal processing circuit that lets you play your favorite movie and music sources and listen to them with a wide range of surround sound mode choices.
127 Surround Sound Mode ( v page72 ) Surr.Parameter ( v page94 ) Tone z 6 ( v page95 ) Audyssey ( v page97 ) M-DAX z 9 ( v page96 ) PRO LOGIC g Music mode only NEO:6 Music mode only Pan.
128 Surround n Types of input signals, and corresponding sound modes This table shows the input signal that can be played in each sound mode. Check the audio signal of the input source then select the sound mode. Symbols in the table F This indicates the default sound mode.
129 Relationship between video signals and monitor output Output Input HDMI output Video output HDMI VIDEO Video Menu Video Menu A A A Only the menu is displayed A A A S S <VIDEO> S A S <HDMI.
130 Explanation of terms A A2DP A2DP is one profile of Bluetooth defined for in-car devices or AV devices that use wireless communication instead of a cable. Adobe RGB color, Adobe YCC601 color The color space defined by Adobe Systems Inc. Because it is a wider color space than RGB, it can produce more vivid and natural images.
131 F FLAC FLAC stands for Free lossless Audio Codec, and is a lossless free audio file format. Lossless means that the audio is compressed without any loss in quality.
132 Troubleshooting If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other devices operating properly? If this unit does not operate properly, check the items listed in the table below.
133 G Audio H Symptom Cause/Solution Page Audio is not output. • Check the connections for all devices. • Check the speaker connections and configurations. • Check whether the audio device power is turned on. • Adjust the master volume.
134 G iPod / USB memory device / Internet Radio / Media Server / Flickr / Pandora / SiriusXM / Spotify H Symptom Cause/Solution Page iPod cannot be played. • Some iPods do not support being used connected directly to the USB port. 17 The file names are not displayed properly (“.
135 Symptom Cause/Solution Page Sound is broken during playback. • Network or USB memory device’s signal transfer speed is slow or communications lines or radio station is congested. This is not a malfunction. When playing broadcast data with a high bit rate, the sound may be broken, depending on the communications conditions.
136 Resetting the microprocessor Perform this procedure if the display is abnormal or if operations cannot be performed. Note that when the microprocessor is reset, all the settings are reset to their default values. X M-DAX PRESET CH 1 Turn o the power using X .
137 v Numerics 2.1-channel ························································· 81 3D ······································································· 11 5.
138 v N Network ····················································· 29, 110 Notifications ···························.
LICENSE License This section describes software license used for this unit. To maintain the correct content, the original (English) is used. n Boost http://www.
LICENSE 9. Termination. a. This License and the rights granted hereunder will terminate automatically upon any breach b y Y ou of an y term of this License.
LICENSE 3. The names of its contributors may not be used to endorse or promote products derived from this software without specific prior written permission.
Dimensions Unit : in. (mm) 12 15/16 (328.5) 14 29/64 (367.0) 8 55/64 (225.0) 2 3/16 (55.5) 1 57/64 (48.0) 37/64 (14.5) 3 9/16 (90.5) 4 9/64 (105.0) 17 21/64 (440.0) 13 25/64 (340.0) 2 11/64 (55.0) 1 31/32 (50.0) 1 31/32 (50.0) 5/8 (16.0) 57/64 (22.5) Weight : 18 lbs 1 oz (8.
D&M Holdings Inc. 3520 10241 00AM V00.
Een belangrijk punt na aankoop van elk apparaat Marantz NR1504 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Marantz NR1504 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Marantz NR1504 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Marantz NR1504 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Marantz NR1504 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Marantz NR1504 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Marantz NR1504 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Marantz NR1504 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
