Gebruiksaanwijzing /service van het product FE1000 van de fabrikant Abocom
Ga naar pagina of 20
10/100Mbps Dual Speeds Fast Ethernet PC Card Ethernet A dapter Quick Installation Guide.
HARDW ARE INST ALLA TION This chapter describes how to in stall the dual speeds Fast Ethernet PC Card in your noteboo k computer and connect it to network. The PC Card could be c onnected t o either 10 0Mbps Fast Ethernet or 10M bps Ethernet o ver unshielde d twisted pair (UTP) cable.
-2- Connecting and Removing the Cable of Media Coupler to the PC Card Grasp the PC Card 15-pins connector at t he end of the media coupl er with the pointing t riangle facing upward. Gently in sert it into the mating connecto r on the PC Card until it clicks in place at both sides.
should be used to connect between m edia coupler and 100Mbps hub or switch. symbol 108 f "Monoty pe Sorts" s 6 O For operati on in the 10Mbps (10Base-T) Ethernet network, Cat egory 3, 4 or 5 unshielded twisted pai r (UTP) cable could be used to connect between the medi a coupler and a 10Mbps hub or switch.
SOFTW ARE INST ALLA TION Plug the driver disk ette into the floppy drive and set the current drive to the floppy drive. Then run INST ALL to install the real m ode drivers such as ODI or NDIS 2.
3 .If current settings are acceptable, select Start Installation and go to step 5. Otherwise, select Modify Parameters to make setti ngs changed 4 .Move cursor to focu s on the setting you want to make change and press <Enter>” to select a fit value.
2 .Using a text editor to edit the NET.CFG for setting the default frame type. In the Netware server the fram e type is set to 802.3 fo r NW3.11 and 802.2 for NW 3.12 and NW4.x The fr ame type must be set to the same with th e server or the client coul dnsymbol 146 f "Parisian B T" s 10 ’} t login to the server.
-Get the 4 Cl ient disks fr om the networ k administrator, or -Run the NWCLIENTINSTALL.EXE in a previous Installati on 2 .A message appears on the scre en asking you whether or not yo u want the program to perfo rm modifications on your AUTO EXEC.BAT and CONFIG.
10 .Go to the Insert the Driver Disk dialog box and specif y the pa th where th e ODI driver and INS files reside. For example: C:ODI.DOS. 11 .Press Enter and select the target ODI driver. 12 .Specify the driver's op tional settings. 13 .Press F10 to save to new configuration.
--Card Enabler SET NWLANGUAGE=ENGLISH --Set NetW are 4.X to English language LSL --Link Support Layer Module provided by Novell LE100ODI --Hardware Specific Module IPXODI --IPX Protocol Stack Module provided by Novell VLM --DOS Support Module provided by Novell F: --Change to connected device LOGIN xxx --Login to file server as user xxx 17 .
3 .Select Microsoft LAN Man ager item on the menu screen. 4 .If current settings are acceptable, select Start Installation ” and go to step 6. Otherwise, select Modify Parameters ” to make sett ing changed. 5 .Move cursor to each field you want to make a change and press <Enter> to select a fit value.
Example of PROTOCOL.INI: used by LAN Manager [PROTMAN] DRIVERNAME = PROTMAN$ DYNAMIC = YES PRIORITY = NETBEUI [NETBEUI_XIF] Drivername = netbeui$ SESSIONS = 6 NCBS = 12 BINDINGS = "LE100NDS_NIF" LANABASE = 0 [LE100NDS_NIF] ; protocol.ini session for LAN driver .
DRIVERNAME = LE100NDS$ Packet Driver 1 .Run INST ALL.EXE from root direct ory of driver diskette. 2 .Select Packet Driver item on the m enu screen. 3 .If current settings are acceptable, select Star t Installation and go to step 5. Otherwise, select Modify Parameters ” to make setti ng changed.
3 .In Networks di alog box, check Install Microsoft Windows Net work and Others, thereafter select Novell NetWare (Workstation Shell, 3.X) or Novell NetWa re (Workst ation 4 .0 and a bove) and press OK to enter the screen of PXODI.COM and LSL.COM” 4 .
12 .If current settings are a cceptable, select Start Installation ” and go to step 13. Otherwise, select Modify Paramet ers ” to m ake settings changed. 13 .Move cursor to focus on the settin g you want to make a change and press <E nter> to select a fit value.
3 .Open My Computer 4 .Open Control Panel 5 .Run the Network 6 .Select Adapters page 7 .Press Add to add network adapter 8 .Press Have Disk button 9 .Insert the driver disk in to drive A: 10 .Specify the path to ” A: and press OK 11 .A dialog box will appear to adjust the driver's settings.
2 .Insert the PC Card into the slot. In New Hardware Found dialog box, select Driver from disk provided by hardware manufacturer”. 3.Please input the path, A: and insert driver diskette. The driver will be installed an d you may be asked for the original Windows 95 CD/disks.
2 .Run INSTALL.EXE from root directory of driver diskette. 3 .Select LANTASTIC 6.0 in Networ k Operating System screen. 4 .If current settings are acceptable, select Start Installation ” and go to step 6. Otherwise, select Modify Parameters ” to make setti ngs changed.
properly. If the PCMCIA Se rvice of OS/2 Wa rp has been enabled already, pl ease jum p to portion B for driver install ation otherwi se please foll ow the instructions in the following to install th e PCMCIA Service. A. Enable PCMCIA Service of OS/2 Warp 1 .
1 .In the OS/2 Desktop group, double-c lick on the MPTS icon. 2 .Click on the Configure button. 3 .Select the LAN adapters and protocols opt ion. 4 .Click on the Configure butt on. 5 .Select the Other adapters ...” option. 6 .Insert the driver d iskette and type the d river path: A:OS2NDIS2 Click on t he OK button.
Een belangrijk punt na aankoop van elk apparaat Abocom FE1000 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Abocom FE1000 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Abocom FE1000 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Abocom FE1000 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Abocom FE1000 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Abocom FE1000 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Abocom FE1000 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Abocom FE1000 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
