Gebruiksaanwijzing /service van het product FF420 van de fabrikant Multi-Tech Systems
Ga naar pagina of 207
FaxFinder ® V.34 Fax Servers Models: FF120 FF220 FF420 FF820 Administrator User Guide.
FaxFinder ® Administrator User Guide S000405E, Version E Models: FF120, FF220, FF420, and FF820 Copyright © 2008, by Multi-Te ch Sy stems, Inc. This publication may not be reproduced, in whole or in part, without prior expressed written p ermission from Multi-Tech S y st ems, Inc.
Multi-Tech Systems, Inc. FaxFinder Admin User Guide 3 C ONTENTS CHAPTER 1 – PRODUCT DESCRI PTION & SPECIF ICATI ONS ............................................................... 4 Product Descr iption ..........................................
Multi-Tech Systems, Inc. FaxFinder Admin User Guide 4 Chapter 1 – P roduct Descript ion & Specif icat ions Product Descriptio n This manual describes four Multi-Te ch V.34 fax serv ers: the FF120 1-Port FaxFinder unit, the FF220 2- Port FaxFinder unit, the FF420 4-Port FaxFinder unit, and the FF820 8-P ort FaxFinder unit.
Chapter 1: Product Description and Spe c ifications Multi-Tech Systems, Inc. FaxFinder Admin User Guide 5 The FF420 and FF820 are both hou sed in chassis of t he same size and shape. Similarly, the FF120 and FF220 are both housed in a chas sis of the sam e size and shape, a cha ssis smaller and differe ntly shape d than that for the FF420/820.
Chapter 1: Product Description and Spe c ifications Multi-Tech Systems, Inc. FaxFinder Admin User Guide 6 Safety Warnings Telecom 1. Never install telephone wiring du ring a lightning storm. 2. This product must be disconnected from pow er source and tele phone network interface when servicing.
Chapter 1: Product Description and Spe c ifications Multi-Tech Systems, Inc. FaxFinder Admin User Guide 7 Technical Specifications The FaxFinder models meet t he following specifications: FF120/220 FF.
Chapter 1: Product Description and Spe c ifications Multi-Tech Systems, Inc. FaxFinder Admin User Guide 8 Related Manuals Each FF-120/220/420/820 FaxFinde r unit comes with 4 manuals th at serve different purposes (see table below).
Chapter 2: Installation Multi-Tech Systems, Inc. FaxFinder Admin User Guide 9 Chapter 2 – Instal lat ion Introduction This chapter show s y o u how to set up your Mu lti-Tech Model FF120/220/420/820 FaxFinder. The setup process incl ude s both cabling of the FaxFi nder unit and configuratio n of the FaxFinder server software.
Chapter 2: Installation Multi-Tech Systems, Inc. FaxFinder Admin User Guide 10 Mechanical Mounting The FF120/220 FaxFinder comes with c hassis screw holes to facilitate a ttaching it to a flat surf ace. The FF420/820 are table-t op units that can also be rack-mounted.
Chapter 2: Installation Multi-Tech Systems, Inc. FaxFinder Admin User Guide 11 Quick Hookup FF120/220 FF420/820 FaxFinder FF-120/22 0 Hookup Pow er Ca ble Receptacle Cabling to your IP network. RJ-45 conne ctor . Cabling to telco POTS lines or PBX station ports.
Chapter 2: Installation Multi-Tech Systems, Inc. FaxFinder Admin User Guide 12 Earth Grounding for FF420/820 Produc t Ground Screw Grounding conn ectors must be secured perma nen tly to product ground screw and earth ground screw.
Chapter 2: Installation Multi-Tech Systems, Inc. FaxFinder Admin User Guide 13 FaxFinder Operating Modes The FaxFin der Fax Server p rovides two- way fax servic e to PC client users on an Ethernet network.
Chapter 2: Installation Multi-Tech Systems, Inc. FaxFinder Admin User Guide 14 Installation Overview Part A: Cabling – Connecting the FaxFinder to Power, Phone Lines, and Ethernet Summary : Place the FaxFinder in a convenient location, and then connect it to your AC power outlet and Ethernet.
Chapter 2: Installation Multi-Tech Systems, Inc. FaxFinder Admin User Guide 15 2. Verify Powering. After power is applied, the Power LED comes on immediately but there is a 4-second delay b efore the Status LED comes on. In normal operation, the Status LED will be flashing.
Chapter 2: Installation Multi-Tech Systems, Inc. FaxFinder Admin User Guide 16 Part B: Connecting to Telephony Service The FaxFinder can either be connected to a PBX (for use in Automated Routing Mode ) or to POTS lines (for use in Manual Routing Mode ).
Chapter 2: Installation Multi-Tech Systems, Inc. FaxFinder Admin User Guide 17 Part C: Installing the Software There are two programs to install for configuring an d usin g the FaxFinder unit. The Device Manager software is for the Administrator and pri m arily deal s with the setup and logging functionality.
Chapter 2: Installation Multi-Tech Systems, Inc. FaxFinder Admin User Guide 18 C. Select the location where you would like the softwa re to install. Click Next .
Chapter 2: Installation Multi-Tech Systems, Inc. FaxFinder Admin User Guide 19 E. When the installation is co mpleted, cli ck Finish . Installation of the Device Manger softw are is co mplete. You may now move ahead and set up your FaxFinder unit using the Device Manag er software, or continue with the Client software in stallation below.
Chapter 2: Installation Multi-Tech Systems, Inc. FaxFinder Admin User Guide 20 Installing the Client software A. Insert the FaxFinder Produ ct CD into the CD-RO M drive of the client PC. If the CD does not auto start, use Windows Explorer to navigate to your CD drive and launch the installati on pro gram by double-clicking on cd_start .
Chapter 2: Installation Multi-Tech Systems, Inc. FaxFinder Admin User Guide 21 B. At the Welcome screen, click Nex t . C. At the Select Installation Folder screen, browse to the de sired file location for the FaxFinder client software. In most cases, the default file location is re commended.
Chapter 2: Installation Multi-Tech Systems, Inc. FaxFinder Admin User Guide 22 D. At the Confirm Installation screen, click Next to begin the installat ion.
Chapter 2: Installation Multi-Tech Systems, Inc. FaxFinder Admin User Guide 23 G. You will be asked if you want the Client software to a utomatically l aunch when the installation is complete. Select your preference H. You will be asked whether or not you want to associate .
Chapter 2: Installation Multi-Tech Systems, Inc. FaxFinder Admin User Guide 24 Client Install on Terminal Service The process for installing the FaxFinder Client soft ware in Terminal Services is as follows: • Run the FaxFinder Client for Terminal S ervice s installer as an administrato r on the terminal server.
Chapter 2: Installation Multi-Tech Systems, Inc. FaxFinder Admin User Guide 25 FaxFinder Client Terminal Services MSI Installer The FaxFinder Client Terminal Services Installer is a lso availa ble as an MSI package. • Run the FaxFinder Client for Terminal S ervice s installer as an administrato r on the terminal server.
Chapter 2: Installation Multi-Tech Systems, Inc. FaxFinder Admin User Guide 26 Part D: Configuring the FaxFinder Server Summary of Configuration Data The table below lists the information you will need to fill in on the variou s FaxFind er Serve r screen.
Chapter 2: Installation Multi-Tech Systems, Inc. FaxFinder Admin User Guide 27 Manual Routing Mode: Mapping of FF Ports to Phone Numbers FaxFinder Port Phone Numbe r Port 1 Port 2 Port 3 Port 4 Port 5.
Chapter 2: Installation Multi-Tech Systems, Inc. FaxFinder Admin User Guide 28 1. Setting Admin PC to Startup IP Address There are two ways that you can se t the startup IP param eters. You can either • do steps 1A and 1B , then do the steps for your operating sy stem from the table , and then skip to 2A , -or- • do the “Alternative Method .
Chapter 2: Installation Multi-Tech Systems, Inc. FaxFinder Admin User Guide 29 Double-click on the FaxFinder in the Auto Discovery Monitor dialog box and ch ange the IP Addresses. If you know the correct User ID and Password , you can change the IP Address, Subnet Mask or Gateway IP.
Chapter 2: Installation Multi-Tech Systems, Inc. FaxFinder Admin User Guide 30 2. Logging In A. Bring up a Web browser on your pc. At the brow ser’s address line, type the IP address of the FaxFinder: either type http://192.168.2.1 and press Enter , or type the IP address you set using the Auto Discovery dialog box (the “Alter nati ve Method.
Chapter 2: Installation Multi-Tech Systems, Inc. FaxFinder Admin User Guide 31 E. Click the Login button. The Web Management Ho me screen will appea r. From this scree n, you can access all of the FaxFinder Server software screens. 3. Setting FaxFinder IP Addresses A.
Chapter 2: Installation Multi-Tech Systems, Inc. FaxFinder Admin User Guide 32 5. Log In After Reset Having reset the IP address of the administrator’s PC , you must log into the FaxFinder Server softwa re again. Go to the Login screen, enter admin as User Name and admin as Password.
Chapter 2: Installation Multi-Tech Systems, Inc. FaxFinder Admin User Guide 33 At this point, the FaxFinder ‘home’ page is displayed. Click on Phone Book to see the updated values. The next step ( B1 ) will depend on the ro uting mode (automated or manual) used .
Chapter 2: Installation Multi-Tech Systems, Inc. FaxFinder Admin User Guide 34 B2. “Pots Line n” Rows: Finishing Click on Update in each of the “Pots Line n ” rows after editing. The message “Succe ss: POT S Line n was updated” will appear above the Pho ne Book list.
Chapter 2: Installation Multi-Tech Systems, Inc. FaxFinder Admin User Guide 35 7. Setting up the Mail Server A . In the FaxFinder Administration screen, go to the SMTP Con figura tion fields. B. Fill in the network IP address of your mail server. C. If needed, fill in SMTP Port values if differ ent than 25 (which is the default value).
Chapter 2: Installation Multi-Tech Systems, Inc. FaxFinder Admin User Guide 36 D. Use the Routing field to set the FaxFinder’s o perating mode. For Manual Routing Mode , set the Routing field to “Pots Line.
Chapter 2: Installation Multi-Tech Systems, Inc. FaxFinder Admin User Guide 37 J. Smart Dial . When Smart Dial mode is ON, the FaxF inder will loo k for a dial tone before dialing. If, under normal circum stan ces, no dial tone is presented to the FaxFinder, then set Smart Dial to OFF.
Chapter 2: Installation Multi-Tech Systems, Inc. FaxFinder Admin User Guide 38 9. Changing Administrator Server Password A. In the Password Administration screen, enter a new Passwo rd for the FaxFinde r Admin istrator (something other than “adm in”).
Chapter 2: Installation Multi-Tech Systems, Inc. FaxFinder Admin User Guide 39 11. Sending Test Fax from Fax Machine to FaxFinder A. Using a conventional fax machine, send a fax to the fax numbe r establi shed for the FaxFinder Administrator. B. Verify that the fax message sent reac hes the email inbox of the admini strato r.
Chapter 2: Installation Multi-Tech Systems, Inc. FaxFinder Admin User Guide 40 C. Verify also that you can open the fax in a PDF view er program on your compu ter. The PDF viewer could be any commercial viewe r or any open source P DF viewer. You can also choose to have your fax messages delivered as TIF files.
Chapter 2: Installation Multi-Tech Systems, Inc. FaxFinder Admin User Guide 41 12. Adding Client-Users to the Phone Book A. In the Phone Book screen just below the entrie s for the FaxFinde r admini strator, make entries for the other persons in your office who will sen d and receive faxes through the FaxFind er.
Multi-Tech Systems, Inc. FaxFinder Admin User Guide 42 Chapter 3 – F axFinder Ser v er Sof tw ar e Scr eens Introduction In this chapter, we present the screens of the FaxFinder server soft ware. We describe each field in each screen and some of the command buttons.
Chapter 3: FaxFinder Server Software Scre ens Multi-Tech Systems, Inc. FaxFinder Admin User Guide 43 Login Screen The FaxFinder Server Login screen is the primary security device for the Server softw are. The FaxFinder has a default setting that allows u se of “admin” as both the User Name a nd th e Password at initial startup.
Chapter 3: FaxFinder Server Software Scre ens Multi-Tech Systems, Inc. FaxFinder Admin User Guide 44 Fax Log Screen Sorting Function . You can sort the entries of this scr een by doi ng a mouse-over on the name/identifier of any column that has variable entries.
Chapter 3: FaxFinder Server Software Scre ens Multi-Tech Systems, Inc. FaxFinder Admin User Guide 45 Fax Details Screen The Fax Details screen is a secondary scre en accessible from the Fax Log screen. It presents detaile d technical information about a fax selecte d in the Fax Log screen.
Chapter 3: FaxFinder Server Software Scre ens Multi-Tech Systems, Inc. FaxFinder Admin User Guide 46 Fax Details Screen Field Definitions Field Values Description Off-Hook Time mm/dd/yyyy hh:mm:ss The time at which the modem went off-hook for the fax transmission.
Chapter 3: FaxFinder Server Software Scre ens Multi-Tech Systems, Inc. FaxFinder Admin User Guide 47 Current Status Screen Current Status Screen Field Definitio ns Field Name Values Description System fields group Current Time weekday, mo, dd hh:mm:ss yyyy The present time of day.
Chapter 3: FaxFinder Server Software Scre ens Multi-Tech Systems, Inc. FaxFinder Admin User Guide 48 Current Status Screen Field Definitio ns (cont’d) Field Name Values Description System fields group Up Time x days yy hours: zz minutes Operation time since last reboot.
Chapter 3: FaxFinder Server Software Scre ens Multi-Tech Systems, Inc. FaxFinder Admin User Guide 49 The “Initialize Modem” and “Make Busy” button comm ands can be legitimately invoked o nly by a user with administrative rights.
Chapter 3: FaxFinder Server Software Scre ens Multi-Tech Systems, Inc. FaxFinder Admin User Guide 50 Administration Screen.
Chapter 3: FaxFinder Server Software Scre ens Multi-Tech Systems, Inc. FaxFinder Admin User Guide 51 Administration Screen Field Definitio ns Field Name Values Description IP Configuration Fields IP Address n.n.n.n for n = 0-255 The IP address of the fax server.
Chapter 3: FaxFinder Server Software Scre ens Multi-Tech Systems, Inc. FaxFinder Admin User Guide 52 Administration Screen Field Definitio ns (con tinued) Field Name Values Description SMTP Configuration Fields SMTP Server User ID alp han umeric Identifier used by FaxFinder when interfacing with mail server.
Chapter 3: FaxFinder Server Software Scre ens Multi-Tech Systems, Inc. FaxFinder Admin User Guide 53 Administration Screen Field Definitio ns (con tinued) Field Name Values Description Time Configurat.
Chapter 3: FaxFinder Server Software Scre ens Multi-Tech Systems, Inc. FaxFinder Admin User Guide 54 Phone Book Screen The Phone Book screen maps the PBX extension phone n umbers of clients to their resp ective email inbox addresses at which they will recei ve incoming faxes as viewable drawing files.
Chapter 3: FaxFinder Server Software Scre ens Multi-Tech Systems, Inc. FaxFinder Admin User Guide 55 Phone Book Screen Field Definitions (cont’d) Field Name Values Description Pots Line n rows Each row in a group of rows immediately following the Administrator row corresponds to one of the FaxFinde r’s modems.
Chapter 3: FaxFinder Server Software Scre ens Multi-Tech Systems, Inc. FaxFinder Admin User Guide 56 Modem Configuration Screen Modem Configuration Screen Field Definitions Field Name Values Description Modem POTS Modem #, All This field allows you to select one or all mod ems to change configuration.
Chapter 3: FaxFinder Server Software Scre ens Multi-Tech Systems, Inc. FaxFinder Admin User Guide 57 Modem Configuration Screen Field Definitions (c ont’d) Field Name Values Description Routing Defi.
Chapter 3: FaxFinder Server Software Scre ens Multi-Tech Systems, Inc. FaxFinder Admin User Guide 58 “Modem Configuration: POTS Mode m” Screen F ield Definitio ns (cont’d) Field Name Values Des cription Dial Prefix Numeric string, 5 characte rs, max.
Chapter 3: FaxFinder Server Software Scre ens Multi-Tech Systems, Inc. FaxFinder Admin User Guide 59 “Modem Configuration: POTS Mode m” Screen F ield Definitio ns (cont’d) Field Name Values Desc.
Chapter 3: FaxFinder Server Software Scre ens Multi-Tech Systems, Inc. FaxFinder Admin User Guide 60 Password Administ ration Screen Use the Password Administration screen to assign password to client u sers in the FaxFinder system. In this screen, you specify each client’s name, user ID, and pa ssword.
Chapter 3: FaxFinder Server Software Scre ens Multi-Tech Systems, Inc. FaxFinder Admin User Guide 61 Shared Resources Screen Inbound Fax Backup gives you the ability to add a Share location t o copy re ceiv ed faxes. This feature allows all incoming faxes to be copied t o a sha re location before they are emailed.
Multi-Tech Systems, Inc. FaxFinder Admin User Guide 62 Chapter 4 – F axFinder Client Sof tw ar e Co nf ig uration Establishing Client User’s ID in System When the FaxFinder Fax Client Software sta rts, you will be prompted to enter your o wn cli ent user information in the Options | Identification scre en.
Chapter 4: FaxFinder Client Software Co nfiguration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 63 Associating Client with Specific FaxFinder Unit(s) Sometimes more than one FaxFinde r uni t is connected to an Ethernet network. In some cases, certain client users might be assigned to some FaxFinder u n its and not assi gned to others.
Chapter 4: FaxFinder Client Software Co nfiguration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 64 NOTE: The Username ent ered he re must match the entry used in the “U ser ID ” field of the Phone Book screen in the FaxFinder Serve r Software.
Chapter 4: FaxFinder Client Software Co nfiguration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 65 Disassociating the Client from a Specific FaxFinder Unit In this procedure, you will un-do the proc edure “Asso cia ting Client with a Specific FaxFinder Un it.
Chapter 4: FaxFinder Client Software Co nfiguration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 66 Disabling and Re-Enabling a Client’s FaxFinder Service Disabling a FaxFinder’s se rvice to a spe cific cli ent is simply a tempora ry versio n of disa ssoci ating the client from that FaxFinder.
Chapter 4: FaxFinder Client Software Co nfiguration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 67 FaxFinder Fax Client Software Menu Command Definitions FaxFinder Fax Client Soft ware Menu Co.
Chapter 4: FaxFinder Client Software Co nfiguration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 68 The FaxFinder Send Fax Screen The FaxFinder Send Fax screen app ears (a) when you ‘print to.
Chapter 4: FaxFinder Client Software Co nfiguration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 69 FaxFinder Send Fax Screen Definitions (con t’d) Command/Field Name Values Description Recipients pane + (button) Brings up the Enter a Fax Recipien t wi ndo w.
Chapter 4: FaxFinder Client Software Co nfiguration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 70 FaxFinder Send Fax Screen Definitions (con t’d) Command/Field Name Values Description Cover Page pane Use Cover Page Y/N Check this checkbox to include a cover p age with your fax.
Chapter 4: FaxFinder Client Software Co nfiguration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 71 FaxFinder Fax Client Soft ware Menu Command Definitions Option tab Description Identification tab. The Fax Head er Loc al ID can be used to set the ID of the Sending Modem when Sendi ng a Fax using the FaxFinder Cli ent.
Chapter 4: FaxFinder Client Software Co nfiguration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 72 FaxFinder Fax Client Soft ware Menu Command Definitions (c ont’d) Command Name Values Descr.
Chapter 4: FaxFinder Client Software Co nfiguration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 73 FaxFinder Fax Client Soft ware Menu Command Definitions (c ont’d) Field Name Values Description Device Status tab Device (column) alpha nume ric Shows stat us of FaxFinder or HylaFAX server units with which the client is associate d.
Chapter 4: FaxFinder Client Software Co nfiguration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 74 FaxFinder Fax Client Soft ware Menu Command Definitions (c ont’d) Command Name Description .
Chapter 4: FaxFinder Client Software Co nfiguration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 75 FaxFinder Fax Client Soft ware Menu Command Definitions (c ont’d) Field Name Values Description Fax Ports tab Device (column) alpha nume ric Shows FaxFi nder units with which the client is associated.
Chapter 4: FaxFinder Client Software Co nfiguration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 76 FaxFinder Fax Client Soft ware Menu Command Definitions (c ont’d) Field/Command Name Values Description Fax Log tab Recipient (column) Identifies recipient of each outgoing fax.
Chapter 4: FaxFinder Client Software Co nfiguration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 77 FaxFinder Fax Client Soft ware Menu Command Definitions (c ont’d) Field/Command Name Values Description Address Book tab Name (column) alpha numeric Shows the name of the the selected Address Book entry.
Chapter 4: FaxFinder Client Software Co nfiguration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 78 FaxFinder Fax Client Soft ware Menu Command Definitions Command Name Values Description Address Book menu commands Add Contact -- Brings up the New Contact screen for addi ng entri es to client-user’s personal addr ess book.
Multi-Tech Systems, Inc. FaxFinder Admin User Guide 79 Chapter 5 – F axFinder Client Sof tw ar e Oper ation Introduction This chapter describe s the things that a client user can do with the FaxFinde r system.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 80 Sending a Fax To send a fax by printing from an application progra m on a client PC, follow the steps listed below. 1. The FaxFinder client software must be installe d on the PC.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 81 5. At the application program (for example, a word p ro ce ssi ng program or drawing prog ram ), print to the FaxFinder. Setting the destination of the printing job varies from prog ram to program.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 82 After the FaxFinder has been chosen a s the target printer, a ‘Prope rties/Prefere nces’ scre.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 83 6. After the printing has been initiated by the applicati on pro gram, the FaxFinder Send Fax screen will appear. Click on Address Book . When the Address Book sc ree n appears, click “N ew.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 84 You can also access the A ddre ss Book directly to add and edit entries. At the FaxFinder F a x Client Software screen, go to Edit | Add Contact . 7.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 85 The “Cover Page Style” chosen will dete rmine h ow thi s information will appear on the fax cover pag e. You can select a standard style from the “Cover Page Style” drop-down menu or cre ate a style of your own in the Template Editor.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 86 Scheduling Fax Tran smissions The FaxFinder allows you to send a fax immediately or delay its transmi ssion u ntil a later time.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 87 7. The fax will be sent at the scheduled time. Y ou can view the event as it happens in the Fax Finde r client software Device Status screen or after the fact in the Fax Lo g screen.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 88 Putting Pending Faxes o n Hold and Removing the Hold Suppose you have sent a fax to 10 recipients.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 89 2. While the fax is being sent to the second party, t he client user re alizes that there is someth ing wrong with the fax. She brings up the FaxFinder Fax Client Software scre en, opens the File menu, and selects “Pause Scheduler.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 90 She could view the details of the fax and, at her option, view the fax again.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 91 She could “delete” the fax, which means that that fax transmi ssi on would never be com pleted.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 92 Setting Fax Retry Number and Interval You can set the FaxFinder client software to retry a fax transmissio n if it fails on the first attem pt. You can set both the number of additional attempts and the inte rval between each additio n al attempt.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 93 Sending One Fax Containing Multiple D ocuments The FaxFinder allows you to include mu ltiple documents in a single fax transmission. Tho se multiple documents could come from the same or different ap plicatio n pro grams.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 94 3. You can also add to the list of files to be fax ed out by including items that you have stored. In the “Documents” pane of the F axFinder Send Fax screen, click + .
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 95 Forwarding a Fax Suppose you receive a fax using the FaxFinder sy ste m.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 96 4. In the FaxFinder Send Fax screen, specify a recipient for the fax.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 97 4. The incoming fax arrives in the client’s email inbox as a messag e with an atta chme nt. The email message is marked as being from the Fax Finder Administrator.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 98 Receiving Faxes in Automated Routing Mode In Automated Routing Mode , the FaxFinder Server delivers in co ming faxes to client PCs in their email inboxes.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 99 5. The fax recipient (a client of the FaxFinder Server) opens the email message. The inco min g fax message takes the form of a graphic file attachment.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 100.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 101 While most of these features are com mon to many graphical programs, som e warrant a bit of explanation. Copy . The Copy function allow s you to copy the fax file and insert it into a different application program.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 102 Spot Magnifying Glass . In this viewing mode, a magnifying glass icon (cu rsor) appears. It can be used in one of three ways to magnify any po rtion of the image: (a) Click over Area, (b ) Click-an d- Hold Over Area, (c) Scan the Graphic.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 103 Click-and-Hold over Area . Two additional windows will appear. The cursor it self becomes a small secondary window of fixed size. The same image also appears on a third win dow.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 104 Importing Fax Images into Ot her Application Programs The Copy command in the Multi-Tech Tiff viewer pro gram allows you to import the fax image into other application programs.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 105 Setting up Your Address Book Manually The Address Book in the FaxFinder Clie nt Software a dds signifi cant convenience to the system.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 106 5. A Contact – Recipient screen will appear p re sentin g the conta ct info for this particular recipient. 6. When you click on “A ddress Book” at the FaxFind er Send Fax screen, this sa me conta ct list will appear.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 107 7. When you select an item from this li st and sele ct Use Cover Page , contact info will be added automatically to the appropriate fields of the cover pag e.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 108 Setting up Your Address B ook by Synchronizing with Outlook What Synchronization Means During sy.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 109 3. Click on Browse . Select the de sired folder from the Select Contact Folder (Outlook :) screen. Click OK . If a confirmation screen appears, click OK .
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 110 5. Right-click on Outlook Synchronizer a nd select Sy nchronize with Outlook .
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 111 Setting Up Address Books with CSV Files Files in CSV format (comma sep arated values) consist of spre ad-sh eet data presented in ASCII (plain text) form.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 112 Suppose you had a list of potential customers exporte d to CSV format from an MS Excel spreadsheet and, for each customer, there were 1 0 fields of data, including their names and fax numbers.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 113 Exporting a FaxFinder Address Book to CSV File Format 1. At the FaxFinder Client software, go t o Addr ess Book | Expor t . The Address Book Export screen will appear.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 114 Importing CSV Files into FaxFinder A ddress Book with Fitted Template 1. In the FaxFinder Fax Client software, go to Addre ss Book | Import . The Address Book Import screen will appear.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 115 6. To find out whether or not the new entries are being properly plac ed into the Addre ss Book format, click Previe w Import . The Template Mapping screen will appear.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 116 For example, if the first record ha s a literal value of “Name” in the Name field, a literal value of “Organization” in the Organization field, etc.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 117 Importing CSV Files into FaxFinder Addr ess Book with a Customized Template CSV contact lists can be created in many applications (M S Outloo k, MS Excel, Notepad, etc.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 118 2. In the FaxFinder Client software, go to Address Book | Import . The Address Book Import screen will appear. Browse to find the CSV f ile that you want to import.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 119 6. When one field name from the drop-down li st has been added (with the + button), the next CSV field name in the drop-down list will appear.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 120 Finish mapping all approp r iate CSV fields to Ne w Contact screen fields. 11. When the mapping is complete, click OK . You will then be prompted to name the template file that you have just created to accommodate t his CSV file.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 121 12. The Address Book Import scree n will retu rn. It will list both the CSV import file and the template file you have just created. 13. To confirm that the field m apping is appropriate, click o n Preview Import .
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 122 15. When you are satisfied that the mapping is set up corre ctly, click Import at the Address Book Import screen. The importing activity will be indicated in the Device Statu s tab of the FaxFinde r Fax Client Software screen.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 123 Transferring an Established Standard FaxFinder Address Book to a New Client- User A FaxFinder Ad.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 124 4. At the FaxFinder Client software, the new client-user should go to Address Book | Import .
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 125 Cover Pages Faxes are often accompanied by a cover page that specifie s from whom it was se nt, to whom it was sent, the date, and other details about the sending an d re ceiving parties.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 126 3. When the FaxFinder Send Fax screen app ears, it will list the docum ent we want to fax in its “Documents” pane. Next w e must specify a recipient.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 127 4. The FaxFinder Send Fax screen app ears agai n bu t this time our recipi ent has been entered.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 128 5. Since we intend to use a cover page, we cli ck “Use Cover Page” and then sel ect a stock cover page from the “Cover Page Style” drop-dow n list.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 129 6. To see how the cover page ap pears after the send er and re cipient information has been aut omatically inserted, click Preview Fax. This is how the fax cover page will be sent.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 130 Creating or Modifying Cover Page Styles The Multi-Tech Cover Page Generator progra m allo ws you either to prod uce cu st om cover pages or to use existing style templates.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 131 3. Several types of objects can be added to a cover page file. These are listed in the Insert pull down menu. The commands to create these obje cts can be invoked eit her here or from buttons on the To ol Bar.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 132 The FaxFinder supports the automated f ield types listed in the table below.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 133 6. Enter the field label in the Static Text box. Be su re to allow enough room for the size of font you have chosen. If the box is too small for the font size, the text will be cut off.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 134 You might want the automated field value to be placed on a line or in a recta ngle . If so, you could use the line cursor to put a line beneath the edit box or use the re ctangle cursor to place a rectangle around the edit box.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 135 8. To add a graphic file to the cover page template, click on the I mage icon . Then browse to the directory that contains the de sire d graphic file.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 136 Modifying Existing Cover Page Templates Note : While all five stock cover page styles can be readily customized, the style s “PlainComplete” and “Plai n S hort” a re especially well suited to custo mization.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 137 For our example, we will rename the file rmc1.cp g, for the purp oses of our fictitious company, Rocky Mountain Construction, Inc. 4. You can use the Tab key to skip from f ield to field in the te mplate.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 138 5. Add com pany logo at top of cover page. For our example, we will add the gra phi c file “ff-rocky-mtn-logo1.bmp” to the co ver page. In the Insert menu of the Template Editor, select “Im age.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 139 6. Add company slogan to bottom of template. For the purposes of our fictitious company, Rocky Mo untain Con struction, Inc., we will use the slog an “Building on New Horizon s.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 140 7. In the File menu, select “Save As” and overwrite the file using th e same filename used in st ep 3, saving it in the ‘Application Data’ directory for the FaxFinde r clie nt softwa re.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 141 9. When the fax is sent, the ‘automated’ fields on the cover p age te mplate will be filled in with information from the Address Book (if the reci pient is listed there).
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 142 Cover Page Generator Menu/Icon Co mmand Descriptions File Menu FaxFinder Cover Page Generator So.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 143 Edit Menu The Undo command (also accessi ble using the keyboard sho rtcut Ctrl + Z and the button) reverses the effect of the last command .
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 144 FaxFinder Cover Page Generator Soft ware Menu Command Definitions (cont’d) Command Name Icon Description Insert menu commands Static Text Use to insert text objects needed in the cover page template.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 145 View Menu FaxFinder Cover Page Generator Soft ware Menu Command Definitions (cont’d) Command Name Icon Description View Menu commands Zoom In Use to view a smaller area of the cover page template file in greater magnification.
Chapter 5: FaxFinder Client Software Op eration Multi-Tech Systems, Inc. FaxFinder Admin User Guide 146 Reporting Failed Faxes to the Administ rator Occasionally clients will re ceive email m essages from the FaxFinde r that pertain to faxes that have failed partially or entirely.
Multi-Tech Systems, Inc. FaxFinder Admin User Guide 147 Chapter 6 – Ser v er Oper at ion Fax Log Email Messages The FaxFinder administrator will receiv e an email after every user-specifie d n faxes have b een handled by the FaxFinder ( n is the total of faxes sent and received).
Chapter 6: Server Operation Multi-Tech Systems, Inc. FaxFinder Admin User Guide 148 Front Panel LEDs Label Identifier Name Description General LEDs Power Power Solid (constant) green if unit is on. Status Status Approximately 30 second s after power is on, the Status LED will be blinking green to show no rmal, working state.
Chapter 6: Server Operation Multi-Tech Systems, Inc. FaxFinder Admin User Guide 149 Dealing with Failed Fax Reports Occasionally clients will re ceive email m essages from the FaxFinde r that pertain to faxes that have failed partially or entirely. That is, some or all of the in tended pages of the fax may arri ve in a form that can not be read.
Multi-Tech Systems, Inc. FaxFinder Admin User Guide 150 C h a p t e r 7 – D ev i ce M a n a g e r Oper at ion Introduction The process of installing the Device Manager softwa re is explained in Chapter 2. This chapte r will describe the options available to an adm inistrator us ing the Multi-Tech Device manage r software.
Chapter 7 : Device Ma nager Opera tion Multi-Tech Systems, Inc. FaxFinder Admin User Guide 151 Device Manager Main Screen The Device Manager’s m ain screen lists the devices (Fax Find ers, CallFin de rs, or Multi-Access u nits) that are working together as a system.
Chapter 7 : Device Ma nager Opera tion Multi-Tech Systems, Inc. FaxFinder Admin User Guide 152 Access to Commands The commands of the Dev ice Manager software are acce ssible in the program’ s pull .
Chapter 7 : Device Ma nager Opera tion Multi-Tech Systems, Inc. FaxFinder Admin User Guide 153 Main Screen Menu or Column Description File menu Also contains the Exit command which closes the Device Man ager program. From here, you can launch the Options scree n from which the Logging function can be configure d.
Chapter 7 : Device Ma nager Opera tion Multi-Tech Systems, Inc. FaxFinder Admin User Guide 154 Device Manager “File” Menu File Menu Command Description of Fields & Buttons Options Logging Options can be u sed to alter the default logging options for the Device Manager.
Chapter 7 : Device Ma nager Opera tion Multi-Tech Systems, Inc. FaxFinder Admin User Guide 155 Device Manager “Edit” Menu Edit Menu Command Description Synchronize Phonebooks Transfers ph onebook data from a Primary FaxFinder unit to all FaxFinders designated as Copy units.
Chapter 7 : Device Ma nager Opera tion Multi-Tech Systems, Inc. FaxFinder Admin User Guide 156 Synchronizing Phonebooks When FaxFinder phonebo oks are synchronized, all non- admi nistrative listings match.
Chapter 7 : Device Ma nager Opera tion Multi-Tech Systems, Inc. FaxFinder Admin User Guide 157 3. Using synchronizatio n . In the main Device Manager screen, open the Edit menu and sel ect Synchronize Phonebooks .
Chapter 7 : Device Ma nager Opera tion Multi-Tech Systems, Inc. FaxFinder Admin User Guide 158 Adding Devices Any FaxFinder/CallFinder/MultiAccess unit to be add ed to the syst em and come under the management of the Device Manager software must be connected to the same IP network as the computer runnin g the Device Manager software.
Chapter 7 : Device Ma nager Opera tion Multi-Tech Systems, Inc. FaxFinder Admin User Guide 159 Using the Auto-Discovery Monitor The Auto-Di scov er Devices command of Device M anager will automatically search the network for FaxFinder, CallFinder, or Multi-Access units.
Chapter 7 : Device Ma nager Opera tion Multi-Tech Systems, Inc. FaxFinder Admin User Guide 160 Viewing Parameters of a Selected Dev ice . If you double-click on a device in the list in the Auto- Discovery Monitor’s main screen, anoth er screen with details about that device will appea r.
Chapter 7 : Device Ma nager Opera tion Multi-Tech Systems, Inc. FaxFinder Admin User Guide 161 Deleting a Device Invoking the Delete command re moves the selected device (FaxFi nder, C allFin der, or Multi-Access unit) from the system. Once deleted, the device w ill no lon ger be u nder the managem ent of the Dev ice Manager software.
Chapter 7 : Device Ma nager Opera tion Multi-Tech Systems, Inc. FaxFinder Admin User Guide 162 Saving a Configuration Each type of device in the FaxFinder/Ca llFinder/MultiAcce ss family saves all of its settings (IP address, password, modem parameters, DID ch annel p arameters, phone book setting s, etc.
Chapter 7 : Device Ma nager Opera tion Multi-Tech Systems, Inc. FaxFinder Admin User Guide 163 Restoring a Configuration To re-install on the device (FaxFinder, CallFinde r, or MultiAccess unit) a group of settings (configuration) previously saved on the computer runni ng the Dev ice Manager software, use the Re store Configuration command.
Chapter 7 : Device Ma nager Opera tion Multi-Tech Systems, Inc. FaxFinder Admin User Guide 164 Exporting a CSV Phonebook By using the export CSV phonebook command, you will create a comma separa ted file that is easily imported into other FaxFinder units.
Chapter 7 : Device Ma nager Opera tion Multi-Tech Systems, Inc. FaxFinder Admin User Guide 165 You will be prompted for a location to sa ve the CSV file. The default directo ry location is the IP address of the FaxFinder. The phone book in ‘FaxFinderComma.
Chapter 7 : Device Ma nager Opera tion Multi-Tech Systems, Inc. FaxFinder Admin User Guide 166 Importing a CSV Phonebook The companion to exporting a CSV pho ne book, impo rting a CSV phone book take s a file created by the export command and repl a ces the current phone boo k wi th that of the unit the file was exported from.
Chapter 7 : Device Ma nager Opera tion Multi-Tech Systems, Inc. FaxFinder Admin User Guide 167 You will be asked to select the folder where you want the config urat ion file to be saved to. The default folder location is the IP address of the F axFinde r.
Chapter 7 : Device Ma nager Opera tion Multi-Tech Systems, Inc. FaxFinder Admin User Guide 168 After the Configuration file is saved, the Serv er Import Dialog appears. You ca n sele ct the file to import, select a file-mapping template or defin e a new temp la te.
Chapter 7 : Device Ma nager Opera tion Multi-Tech Systems, Inc. FaxFinder Admin User Guide 169 1. Click Browse after the File name field and select the file you wish t o import. In most cases this would be a CSV file exported previously from a FaxFinder server.
Chapter 7 : Device Ma nager Opera tion Multi-Tech Systems, Inc. FaxFinder Admin User Guide 170 3. Click the Preview button to view the Mapping of the Import Phone book to compare it to the Contact Field Names. 4. Select the Import button to begin copying the Phone Book to the FaxFinder Server and verify by clicking OK.
Chapter 7 : Device Ma nager Opera tion Multi-Tech Systems, Inc. FaxFinder Admin User Guide 171 6. Once the Import is finished you will be asked to reboo t the FaxFinder Serve r.
Chapter 7 : Device Ma nager Opera tion Multi-Tech Systems, Inc. FaxFinder Admin User Guide 172 The importation is complete, and the FaxFinder Se rver Phon e Book has been replaced.
Chapter 7 : Device Ma nager Opera tion Multi-Tech Systems, Inc. FaxFinder Admin User Guide 173 Retrieving Received Faxes Retrieve Received Faxes provides a w ay to FTP faxe s off a FaxFinder Server when there a r e probl ems with the email server.
Chapter 7 : Device Ma nager Opera tion Multi-Tech Systems, Inc. FaxFinder Admin User Guide 174 Setting Phone Book Sharing The phonebook of a Primary FaxFinder unit is a so urce or central phon ebook. Phone numbers sho uld be entered into this phonebook.
Chapter 7 : Device Ma nager Opera tion Multi-Tech Systems, Inc. FaxFinder Admin User Guide 175 Firmware Updating Proce ss Over time, new versions of firmware will be issued . When these newer versi ons become available, you will want to secure the firmware files (ty pically by downloading them from the Multi-Te ch w eb site) and install them.
Chapter 7 : Device Ma nager Opera tion Multi-Tech Systems, Inc. FaxFinder Admin User Guide 176 For the remainder of this procedure, we will illustrate modem updat ing with an 8-port FaxFinder (8 POTS modems). The procedure will be essentially the same for Multi-Access u nits.
Chapter 7 : Device Ma nager Opera tion Multi-Tech Systems, Inc. FaxFinder Admin User Guide 177 3. Browse to the location of the most recent firm wa re f ile. Again, confirm that the update file has a higher version level than the firmware file that it will repla ce.
Chapter 7 : Device Ma nager Opera tion Multi-Tech Systems, Inc. FaxFinder Admin User Guide 178 6. The updating process will take as lo ng as a m inute. During this time, several messages wil l appear in the Update FaxFinder N.N.N.N window. A transient TFTP screen m ay appear briefly.
Chapter 7 : Device Ma nager Opera tion Multi-Tech Systems, Inc. FaxFinder Admin User Guide 179 Server Firmware Update 1. Bring up the Device Manager softwa re main screen. In the Device colum n, identify the FaxFinder unit on which the update is to be done.
Chapter 7 : Device Ma nager Opera tion Multi-Tech Systems, Inc. FaxFinder Admin User Guide 180 3. Browse to the location of the most recent firmware f ile. Again, confirm that the update file has a higher version level than the firmware file that it wi ll replace.
Chapter 7 : Device Ma nager Opera tion Multi-Tech Systems, Inc. FaxFinder Admin User Guide 181 6. The updating process will take as lo ng as a minute. During this time, several messag es will appear in the Update FaxFinder N.N.N.N wind o w. A transien t TFTP scree n may appea r briefly.
Chapter 7 : Device Ma nager Opera tion Multi-Tech Systems, Inc. FaxFinder Admin User Guide 182 7. Close the Update FaxFinder N.N. N.N window. In the main Dev ice Manager window, the updated version will be listed. 8. Repeat steps 1-7 for each FaxFinder unit in the system.
Multi-Tech Systems, Inc. FaxFinder Admin User Guide 183 Appendix A – Tr oubleshoot ing 1. What if I can't see the we b page for my FaxFinder? REMEDY: Verify that th e Admin PC is actually on the sa me subnet as the Fa xFinder a nd that it can be “pinged.
Appendix A: Troubleshooting Multi-Tech Systems, Inc. FaxFinder Admin User Guide 184 CAUSE A: During transmission, the na me se rver’s addr ess could not be re solved (that is, the FaxFinder unit could not contact your name serve r). RESPONSE A: Contact the FaxFinder unit using telnet and try to ping the nam e serve r.
Appendix A: Troubleshooting Multi-Tech Systems, Inc. FaxFinder Admin User Guide 185 No email message after mail server setup (cont’d) CAUSE E: The email server does not support SMTP.
Appendix A: Troubleshooting Multi-Tech Systems, Inc. FaxFinder Admin User Guide 186 4. What if the FaxFinder doesn't answer a fax call? REMEDY for Manual Rou ting Mode Use this procedure if durin.
Appendix A: Troubleshooting Multi-Tech Systems, Inc. FaxFinder Admin User Guide 187 6. SMTP Error Code List Many messages now cont ain the last re sponse from the email server. These error co de s may be looked up to give more details of exactly what occurred.
Multi-Tech Systems, Inc. FaxFinder Admin User Guide 188 Appendix B – R eg ulator y Inf orm at ion 47 CFR Part 68 Telecom 1. This equipment complies with Part 68 of t he 47 CFR rules an d the req uirements adopted by the ACTA.
Appendix B: Regulatory Information Multi-Tech Systems, Inc. FaxFinder Admin User Guide 189 12. Manufacturing Information on telecomm uni cation s device (modem) embedded in FF-120/220/420/820 units : Manufacturer: Multi-Tech Systems, Inc. Trade Name: Socket Modem Model Number: MT5634SMI Registration No: AU7USA-25814-M5-E Ringer Equivalence: 0.
Appendix B: Regulatory Information Multi-Tech Systems, Inc. FaxFinder Admin User Guide 190 Fax Branding Statement The Telephone Consumer Protection A ct of 1991 makes it unlawful for any person to use.
Appendix B: Regulatory Information Multi-Tech Systems, Inc. FaxFinder Admin User Guide 191 WEEE Statement (Waste Electrical and Electronic Equipment) July, 2005 The WEEE directive places an obligati on on EU-based manufactu rers, distributors, re tailers and importers to take back electronics pr odu cts at the end of their us eful life.
Appendix B: Regulatory Information Multi-Tech Systems, Inc. FaxFinder Admin User Guide 192 C-ROHS HT/TS Substance Concentration 依 照中国 标 准的有毒有害物 质 信息 根据中华人民共.
Multi-Tech Systems, Inc. FaxFinder Admin User Guide 193 Appendix C – W ar r ant y , Ser v ic e, & Re p a i r Multi-Tech Warranty Statement Multi-Tech Systems, Inc.
Appendix C: Warranty, Service, & Repa ir Multi-Tech Systems, Inc. FaxFinder Admin User Guide 194 Repair Procedures for International Cu stomers (Outside U.S.A. and Canada) Your original point-of-purchase Re seller may offer the quickest and most economical repai r o ption for your Multi-Tech product.
Appendix D: Example Systems Multi-Tech Systems, Inc. FaxFinder Admin User Guide 195 Appendix D – Example Sy stems Sample FaxFinder Systems The FaxFinder system handle s faxes in a non-convent ional way. A regular fax machine is a centralized resource.
Appendix D: Example Systems Multi-Tech Systems, Inc. FaxFinder Admin User Guide 196 For outgoing faxes, the FaxFinder works the sa me in both Automated Routing Mode an d Ma nual Routing Mode. Each client must be ‘registered’ with the FaxF i nder Server unit.
Appendix D: Example Systems Multi-Tech Systems, Inc. FaxFinder Admin User Guide 197 Server Setup for Sample FaxFinder System 192.16 8.4.2 51 Pete PSTN PBX Ext 3049 Pat Admin Int erne t Time Serv er FF420 FaxFinder Serv er Ethernet Port Mail Serve r PC of FaxFinder Adminis trator Email: pat@acme99.
Appendix D: Example Systems Multi-Tech Systems, Inc. FaxFinder Admin User Guide 198 Receiving a Fax, Server Perspective Customer fa xes order to Joe at Acme99. Uses Joe’s PBX fax number: 7635553032 1 2 Fax mes sage travers es public p hone network. Fax messa ge reache s PBX.
Appendix D: Example Systems Multi-Tech Systems, Inc. FaxFinder Admin User Guide 199 Receiving a Fax, Client Perspective.
Appendix D: Example Systems Multi-Tech Systems, Inc. FaxFinder Admin User Guide 200 Sending a Fax, Server Perspective Customer receives Mary’s F AX message about product specifications. 1 Acme99 Office Customer ’s Office PBX E xt 303 2 Joe PBX Ext 3049 Pat Admin Email:pa t @acme99 .
Appendix D: Example Systems Multi-Tech Systems, Inc. FaxFinder Admin User Guide 201 Sample Client Setup Associating with Servers and Self Identification.
Appendix D: Example Systems Multi-Tech Systems, Inc. FaxFinder Admin User Guide 202 Address Book: Methods of Management.
Appendix D: Example Systems Multi-Tech Systems, Inc. FaxFinder Admin User Guide 203.
Appendix D: Example Systems Multi-Tech Systems, Inc. FaxFinder Admin User Guide 204.
Appendix D: Example Systems Multi-Tech Systems, Inc. FaxFinder Admin User Guide 205 Printing to FaxFinder What Administrators Must Tell Users.
Appendix D: Example Systems Multi-Tech Systems, Inc. FaxFinder Admin User Guide 206 Sending a Fax, Client Perspective.
Appendix D: Example Systems Multi-Tech Systems, Inc. FaxFinder Admin User Guide 207 Fax Message Components Cover Page Fro m : To : Su b j e c t : Co mm e n t : Th e tim e ha s c o m e fo r al l go od p e r son s to come t o the a i d of th e i r res pe ct ive cou ntri es .
Een belangrijk punt na aankoop van elk apparaat Multi-Tech Systems FF420 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Multi-Tech Systems FF420 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Multi-Tech Systems FF420 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Multi-Tech Systems FF420 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Multi-Tech Systems FF420 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Multi-Tech Systems FF420 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Multi-Tech Systems FF420 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Multi-Tech Systems FF420 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
