Gebruiksaanwijzing /service van het product MT56DSU-S van de fabrikant Multi-Tech Systems
Ga naar pagina of 38
MT56DSU-S Syncronous 56K bps Data Service Unit User Guide.
MT56DSU-S User Guide PN: S000327A Copyright ©2003 by Multi-Tech Systems, Inc. All rights reserved. This publication may not be reproduced, in whole or in part, without prior written permission from Multi- Tech Systems, Inc.
Content s Chapter 1 - Introduction ..................................................................................... 5 1.1 Introduction ............................................................................................. 6 1.2 About This Manual .
Chapter 5 - Service & Warranty ....................................................................... 23 5. 1 Multi-T ech Systems, Inc. W arranty & Repairs Policies ......................... 2 4 5.1.1 Warranty ................................
Chapter 1 - Introduction.
6 Chapter 1 - Introduction 1 .1 Introduction The Multi-Tech Systems MultiDSU, model number MT56DSU-S is a synchronous 56 Kbps data service unit (DSU). As a combined DSU and Channel Service Unit (CSU), it provides a direct connection to the DATAPHONE ® Digital Service (DDS) network.
7 Chapter 1 - Introduction 1. 3 Description The MT56DSU-S is compact, easy to operate and has the features to allow flexibility in meeting your transmission requirements. The DDS is a service for transmission of digital signals via digital transmission facilities exclusively.
8 Chapter 1 - Introduction 1.5 Features The MT56DSU-S provides many useful features. Standard features include V.35 and EIA-232-D interfaces on the data port (DTE device) and a synchronous rate of 56 Kbps on both the data port and trunk, and user- selectable clocking option.
9 Chapter 1 - Introduction 1. 6 Specifications Model Number: MT56DSU-S Device Operation: combined DSU and CSU Data Rates: Synchronous 56 Kbps (Data port and line) Interfaces: Data (RS232) DB25S (female) - Data port Data (V.
Chapter 2 - Front & Back Panel Descriptions.
11 Chapter 2 - Front & Back Panel Descriptions 2 .1 Introduction This chapter describes the front panel LEDs and back panel connectors. The front panel has one row of LEDs. Two back panel connectors provide the data and DDS or LADS connections. A circular power connector is provided to connect the external power supply.
12 Chapter 2 - Front & Back Panel Descriptions 2 . 3 Back Panel All the cable connections, including one power connection and two signal connections, are made at the back panel of the DSU. The RS232 connector is used to connect the DSU to an RS232 or V.
13 Chapter 2 - Front & Back Panel Descriptions 2 . 4 Switch Settings An 8-position DIP switch is located on the right side of the MT56DSU-S printed circuit board (when viewed from the front, as in Figure 2-3). The DIP switch functions are described in the following table.
14 Chapter 2 - Front & Back Panel Descriptions 2.5 Shunts V.35 signal levels are more reliable for high speed data and/or longer cable distances. For higher speeds and/or longer distances, V.35 is preferred. EIA-232-D signal levels are intended for data rates of 19.
Chapter 3 - Unp acking & Setup.
16 Chapter 3 - Unpacking & Setup 3 .1 Introduction This chapter describes the unpacking of the DSU, cable connections depending on whether EIA-232-D or ITU-T V.35 interface signaling is used on the data port, and how to configure the unit dependent on your site situation.
17 Chapter 3 - Unpacking & Setup 3.4 Setup Perform the following procedure to connect your cables and, if necessary, change to V.35 signaling on the data port. 1. If the DTE device has a V.35 interface, the internal shunt must be moved to the V.35 position and a V.
18 Chapter 3 - Unpacking & Setup 3 . 5 V .35 Shunt Either EIA-232-D or ITU-T V.35 electrical signal interface can be selected on the Data connector. Units are shipped with EIA-232-D signal levels selected. Use the following procedure to select V.35.
Chapter 4 - Diagnostics.
20 Chapter 4 - Diagnostics 4 .1 Introduction The DSU is set to a default of Normal (non-diagnostic) mode at the factory. When diagnostics are to be run, change the Loopback DIP switch as described in Chapter 2 of this manual.
21 Chapter 4 - Diagnostics 4.1.2 Line Loopback Test This test enables you to test the local DTE, the local DSU, the communications link, and the remote DSU. Use the following steps to perform the Trunk Loopback Test. 1. Set DIP switch #3 on the remote DSU to the down position.
22 Chapter 4 - Diagnostics 4.1.4 DSU Back-to-Back Test This test lets you connect two DSUs with a back-to-back cable to verify proper DSU operation. Using a DSU that is known to be operational, you can test a second DSU that is suspect. 1. Obtain a DSU Back-to-Back cable (#45050000) from Multi-Tech, or assemble one.
Chapter 5 - Service & W arranty.
24 Chapter 5 - Service & Warranty 5 . 1 Multi-T ech Systems, Inc. Warranty & Repairs Policies 5.1.1 Warranty Multi-Tech Systems, Inc., (hereafter “MTS”) warrants that its products will be .
25 Chapter 5 - Service & Warranty 5.1.3 International Customers (outside U.S.A. and Canada) Your original point of purchase reseller may offer the quickest and most economical repair option for your Multi-Tech product.
26 Chapter 5 - Service & Warranty 5.2 Repairs 5.2.1 Repair Procedures for U.S. and Canadian Customers In the event that service is required, products may be shipped, freight prepaid, to our Mounds View, Minnesota factory: Multi-Tech Systems, Inc.
27 Chapter 5 - Service & Warranty Repairs for damages caused by lightning storms, water, power surges, incorrect installation, physical abuse, or user-caused damages are billed on a time-plus-materials basis.
Appendix.
29 Appendix Appendix A - Application Examples Introduction This section illustrates several types of applications in which the MT56DSU-S is typically used.
30 Appendix DDS Multipoint (Polled) Application Since your Central Office (CO) equipment must include “Multipoint Junction Units” (MJUs) and other special arrangements for this type of service, you may need to coordinate efforts with your network service provider.
31 Appendix Appendix B - Interface Signals and Connector Pinouts RJ-48 Connector Pin 1 Pin 8 Key As viewed from the rear Figure B-1. Connector DESCRIPTION This connector ties the MT56DSU-S to the DDS Network. The RJ-48 connector is keyed for proper insertion of a keyed RJ-48 plug.
32 Appendix DB25S Connector 13 12 1 1 10 9 8 7 6 5 4 3 2 1 25 24 23 22 21 20 19 18 17 16 15 14 Figure B-2. Connector DESCRIPTION This connector ties the MT56DSU-S to the DTE.
33 Appendix DB25S Connector with V.35 Interface 13 12 1 1 10 9 8 7 6 5 4 3 2 1 25 24 23 22 21 20 19 18 17 16 15 14 Figure B-3. Connector DESCRIPTION The DB25 connector also ties the MT56DSU-S to a DTE with a V.35 interface. When a V.35 interface device is connected to a MT56DSU-S, the internal shunt has to be moved to the V.
34 Appendix Loopback Cable (MTS P/N 45640100) 1 8 Figure B-5. Loopback Cable Connector DESCRIPTION This cable lets you test the MT56DSU-S when a second DSU is not available. When the DSU generates a signal, this cable “loops” the signal back to the DSU for comparison to the original signal sent.
35 Appendix Back-To-Back Cable (MTS P/N 45050000) 1 8 Figure B-7. Back-toBack Cable Connector DESCRIPTION This cable lets you test a suspect DSU by connecting it to a known good DSU. It tests the suspect DSU by connecting its Transmit signal to the Receive circuits of the good DSU.
36 Appendix Appendix C - Regulatory Information FCC Regulations for Telephone Line Interconnection 1. This equipment complies with Part 68 of the FCC rules. On the outside surface of this equipment is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN).
37 Appendix Canadian Limitations Notice Notice: The ringer equivalence number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface.
S000327A.
Een belangrijk punt na aankoop van elk apparaat Multi-Tech Systems MT56DSU-S (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Multi-Tech Systems MT56DSU-S heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Multi-Tech Systems MT56DSU-S vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Multi-Tech Systems MT56DSU-S leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Multi-Tech Systems MT56DSU-S krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Multi-Tech Systems MT56DSU-S bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Multi-Tech Systems MT56DSU-S kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Multi-Tech Systems MT56DSU-S . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
