Gebruiksaanwijzing /service van het product DCA-600SSK van de fabrikant Multiquip
Ga naar pagina of 116
P AR TS AND OPERA TION MANUAL P AR TS AND OPERA TION MANUAL THIS MANU AL MUST A CCOMP ANY THE EQUIPMENT A T ALL TIMES. T o find the latest revision of this publication, visit our website at: www .
P A GE 2 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) Diesel engine exhaust and some of PROPOSITION 65 W ARNING.
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 3 NO TE P A GE.
P A GE 4 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) T ABLE OF CONTENTS Specification and part number are subject to change without notice .
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 5 P AR TS ORDERING PR OCEDURES www .mqpo we r .com Or dering par ts has never been easier! Choose fr om three easy option.
P A GE 6 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) DCA-600SSK — SPECIFICA TIONS T able 1. Generat or Specifications Model DCA-600SSK T y pe Rev olving field, sel.
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 7 NO TE P A GE.
P A GE 8 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) DCA-600SSK — DIMENSIONS (T OP AND SIDE) Figure 1. Dimensions.
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 9 Figure 2. Dimensions DCA-600SSK — DIMENSIONS (FRONT , REAR AND DOORS).
P A GE 10 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) DCA-600SSK — SAFETY MESSA GE ALER T SYMBOLS Bef ore using this g enerator , ensure that the operating individual has read and understands all instructions in this manual.
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 11 DCA-600SSK — SAFETY MESSA GE ALER T SYMBOLS AL W A YS place the Engine ON/OFF switch in the OFF position and remove the ignition key when the pump is not in use. AL W A YS w ear approv ed respirator y protection.
P A GE 12 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) DCA-600SSK — R ULES FOR SAFE OPERA TION The following safety guidelines should always be used when operating the DCA-600SSK Whisperwatt™ Generator . General Safety: ■ DO NO T operate or service this equipment before reading this entire manual.
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 13 DCA-600SSK — R ULES FOR SAFE OPERA TION POWER CORD (POWER ON) WET HANDS During operation of this generator , there e.
P A GE 14 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) DCA-600SSK— R ULES FOR SAFE OPERA TION Battery Safety Use the following guidelines when handling the battery: ■ The battery contains acids that can cause injur y to the ey es and skin.
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 15 DCA-600SSK — R ULES FOR SAFE OPERA TION Emergencies ■ AL W A YS kno w the location of the nearest fire extinguisher . ■ AL W A YS kno w the location of the nearest and first aid kit .
P A GE 16 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) Figure 3. T ypical Generator Grounding Application DCA-600SSK — INST ALLA TION DCA-600SSK — INST ALLA TION.
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 17 Outdoor Installation Install the generator in a area that is free of debris , bystanders , and overhead obstructions . Make sure the generator is on secure level ground so that it cannot slide or shift around.
P A GE 18 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) T o reduce the possibility of an accident while tr anspor ting the generator on public roads, always make sure the trailer (Figure 4) that suppor ts the generator and the towing v ehicle are in good operating condition and both units are mechanically sound.
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 19 Explanation of Chart: This section is intended to provide the user with trailer ser- vice and maintenance inf or mation. The ser vice and mainte- nance guidelines referenced in this section apply a wide range of trailers.
P A GE 20 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) DCA-600SSK — TRAILER-SPECIFICA TIONS s n o i t a c i f i c e p S r e l i a r T .
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 21 DCA-600SSK — TRAILER-SPECIFICA TIONS ) t ' n o C ( s n o i t a c i f i c e p S .
P A GE 22 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) Machine Safety Decals The DCA-600SSK generator is equipped with a n umber of saf ety decals . These decals are provided f or operator saf ety and maintenance inf or mation.
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 23 DCA-600SSK — OPERA TION AND SAFETY DECALS.
P A GE 24 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) DCA-600SSK — OPERA TION AND SAFETY DECALS.
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 25 DCA-600SSK — OPERA TION AND SAFETY DECALS.
P A GE 26 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) DCA-600SSK — GENERAL INFORMA TION DCA-600SSK F AMILIARIZA TION Generator The MQ P ow er Model DCA-600SSK is a.
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 27 DCA-600SSK — MAJOR COMPONENTS DCA-600SSK — MAJOR COMPONENTS 4 e l b a T .
P A GE 28 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) DCA-600SSK — GENERA T OR CONTROL P ANEL Figure 6. Generator Control Panel Up to S/N 3698616 S/N 3698617~.
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 29 DCA-600SSK — GENERA T OR CONTROL P ANEL The definitions below describe the controls and functions of the DCA-600SSK " Control Panel " (Figure 6). 1. Pilot Lamp – Indicates that the generator is working properly .
P A GE 30 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) DCA-600SSK — ENGINE OPERA TING P ANEL Figure 7. Engine Operating Panels Up to S/N 3698616 S/N 3698617~.
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 31 The definitions below describe the controls and functions of the DCA-600SSK " Engine Operating Panels " (Figure 7). 1 . T achometer – Indicates engine speed in RPM’ s f or 60 Hz operation.
P A GE 32 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) DCA-600SSK — OUTPUT TERMINAL O VER VIEW Figure 8. Output T erminal P anel Output T erminal Familiarization The “ Output T erminal P anel ” (Figure 8) is provided with the following: Three 240/139V output receptacles, 50 amp Three A UX.
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 33 120 V A C GFCI Receptacles There are two 120 V A C , 20 amp GFCI (Duple x Nema 5-20R) recepacles provided on the output terminal panel. These receptacles can be accessed in any voltage change-over board position.
P A GE 34 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) Figure 13. Connecting Loads Connecting Loads Loads can be connected to the generator by the UVWO terminal lugs or the convenience receptacles. (See Figure 13). Make sure to read the operation manual before attempting to connect a load to the generator .
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 35 DCA-600SSK— LO AD APPLICA TION Single Phase Load Always be sure to check the nameplate on the generator and equipment to insure the wattage, amperage and frequency requirements are satisfactorily supplied by the generator for operating the equipment.
P A GE 36 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) Generator Output V oltages A wide range of voltages are available to supply voltage for many diff erent applications. V oltages are selected by apply- ing jumpers (6) to the voltage change-over board (Figure 15).
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 37 DCA-600SSK — GENERA T OR OUTPUTS/GA UGE READING How to Read the Output T erminal Gauge. The AC ammeter and AC voltmeter change-over switches on the control panel DO NO T effect the generator output.
P A GE 38 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) Figure 21. V oltage Change-Over Board 240V Configuration DCA-600SSK — OUTPUT TERMINAL P ANEL CONNECTIONS UVW O T erminal Output V oltages V arious output voltages can be obtained using the UVW O output ter minal lugs.
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 39 2. Connect the load wires to the UVWO terminals as shown in Figure 27. DCA-600SSK — OUTPUT TERMINAL P ANEL CONNECTIONS 3Ø-480V UVWO T erminal Output V oltages 1 . Jumper the voltage change-over board for 480V operation as shown in Figure 26.
P A GE 40 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) Lubrication Oil Fill the engine crankcase with lubricating oil through the filler hole , but DO NO T ov erfill. Make sure the generator is le v el. Also verify that the oil level is maintained between the two notches (Figure 30) on the dipstic k.
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 41 DCA-600SSK — PRE-SETUP Refueling Procedure: 1. Level T anks – mak e sure fuel cells are lev el with the ground. F ailure to do so will cause fuel to spill from the tank bef ore reaching full capacity .
P A GE 42 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) DCA-600SSK — PRE-SETUP 3. NEVER o verfill trailer fuel tank – It is impor tant to read the trailer fuel gauge when filling trailer fuel tank. DO NO T w ait f or fuel to rise in filler nec k.
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 43 Coolant (Ethylane Gl ycol [Green] / W ater — 50/50 mix) Use only drinkable tap water . If hard water or water with many impurities is used, the inside of the engine and radiator may become coated with deposits and cooling efficiency will be reduced.
P A GE 44 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) DCA-600SSK— PRE-SETUP When connecting battery do the following: 1. NEVER connect the battery cables to the battery terminals when the ignition switch is in either the Pre- Heat, R UN, or ST ART position.
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 45 If applicable perform the following: Apply commercial power to the internal battery charger receptacle (to ensure good star ting) via commercial power . An e xternal power cord will be required.
P A GE 46 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) Figure 52. V oltag e Adjust Contr ol Knob Figure 53. Ammeter (No Load) 13.
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 47 DCA-600SSK— GENERA T OR ST ART -UP PROCEDURE (MANU AL) 14 . The engine oil pressure gauge (Figure 54) will indicate the oil pressure (kg/ cm 2 ) of the engine. Under normal operating conditions the oil pressure is approximately Figure 54.
P A GE 48 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) Steps 20 thru 26 are referenced f o r Engine Operating P anel S /N 3698617~. See Figure 59 b e lo w . This unit does not hav e an ignition switch or a throttle handle.
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 49 DCA-600SSK — GENERA T OR ST AR T -UP PROCEDURE (A UT O MODE) When star ting generator in AU TO mode use the " Manual Start-up " procedure except where noted (see below).
P A GE 50 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) Figure 71. Ignition Key Switch (ST OP position) Engine Shutdown Ignition Key (Up to S/N 3698616) T o shutdo wn the generator use the f ollowing procedure: 1. Place both the MAIN , GFCI and LO AD circuit breakers (Figure 69) to the " OFF position".
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 51 Use T a ble 14 shown belo w as a gener al checklist to be performed on a daily basis.
P A GE 52 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) DCA-600SSK — MAINTENANCE General Inspection Prior to each use, the generating set should be cleaned and inspected for deficiencies. Check for loose, missing or damaged nuts, bolts or other fasteners.
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 53 DCA-600SSK — MAINTENANCE Flushing Out Radiator and Changing Coolant 1. Stop the engine and allow to cool. Tighten valv e of the corrosion resistor (if equipped). 2. T ur n water filer cap slowly and remo v e it.
P A GE 54 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) Generator Storage: For storage of the generator for over 30 days, the following is required: Fill the fuel tank completely . T reat with fuel stabilizer if necessar y .
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 55 Jacket W ater Heater and Internal Batter y Charger 120 V A C Input Receptac les (OPTIONAL) This generator is equipped with two 120 V AC , 20 amp input receptacles located on the output terminal panel.
P A GE 56 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) Figure 76. Hydraulic Brake Components DCA-600SSK —TRAILER BRAKES MAINTENANCE Brakes T r ailer bra kes should be inspected the first 200 miles of operation. This will allo w the brak e shoes and dr ums to seat properly .
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 57 Tires/Wheels/Lug Nuts Tires and wheels are a ve r y impor tant and critical components of the trailer . When specifying or replacing the trailer wheels it is impor tant the wheels, tires, and axle are properly matched.
P A GE 58 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) Lug Nut T orque Requirements It is e xtremely impor tant to apply and maintain proper wheel mounting torque on the trailer . Be sure to use only the fasteners matched to the cone angle of the wheel.
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 59 DCA-600SSK — TRAILER-WIRING DIA GRAM Figure 79. T railer Wiring Diagram (5-Pin).
P A GE 60 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) DCA-600SSK — TRAILER-WIRING DIA GRAM Figure 80. T railer Wiring Diagram (7-Pin).
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 61 DCA-600SSK —GENERA T OR WIRING DIA GRAM DCA-600SSK — ENGINE WIRING DI A Figure 81.
P A GE 62 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) DCA-600SSK — GENERA T OR WIRING DIA GRAM (MAIN BREAKER) Figure 82.
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 63 DCA-600SSK — ENGINE WIRING DIA GRAM Continued on next page Figure 83.
P A GE 64 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) DCA-600SSK — ENGINE WIRING DIA GRAM Continued from previous page Figure 84.
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 65 DCA-600SSK — ELECTR ONIC GO V . CONTROLLER WIRING DIA GRAM Figure 85.
P A GE 66 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) DCA-600SSK — TR OUBLESHOO TING (ENGINE) Practically all breakdowns can be prevented by proper handling and ma.
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 67 DCA-600SSK — TR OUBLESHOO TING (ENGINE) ) D E U N I T N O C ( G N I T O O H S E L B U O R T E N I G N E . 0 2 E L B A T M O T P M Y S M E L B O R P E L B I S S O P N O I T U L O S t o n s i n o i t u l o v e r e n i g n E .
P A GE 68 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) DCA-600SSK — TR OUBLESHOO TING (GENERA T OR/ENGINE) Practically all breakdowns can be prevented by proper han.
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 69 DCA-600SSK — TR OUBLESHOO TING (MPEC) ) C E P M ( G N I T O O H S E L B U O R T R E L L O R T N O C E N I G N E . 2 2 E L B A T n o t p m y Se s u a C e l b i s s o Pn o i t u l o S t h g i l e r u s s e r p l i o w o L .
P A GE 70 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) EXPLANA TION OF CODE IN REMARKS COLUMN The f ollo wing section e xplains the diff erent symbols and remarks used in the P ar ts section of this manual. Use the help numbers f ound on the back page of the manual if there are any questions .
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 71 DCA-600SSK w/SA6D170AE-1 K OMA TSU ENGINE 1 to 3 Units Qty . P/ N Description 2 0 ............ 6125817032 ..................... AIR FIL TER, INNER & OUTER 3 0 ......
P A GE 72 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) GENERA TOR ASSY . DCA-600SSK — GENERA T OR ASSY ..
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 73 GENERA TOR ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 1 8181000002 ROT O R ASSY . .................................. 1 ........ INCLUDE ITEMS W/ * 2 FIELD ASSY . 1 3 * 0601842366 RESIST OR .
P A GE 74 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) DCA-600SSK — GENERA T OR ASSY . GENERA TOR ASSY ..
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 75 DCA-600SSK — GENERA T OR ASSY . GENERA TOR ASSY . NO P AR T NO P AR T NAME QTY .
P A GE 76 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) DCA-600SSK — CONTR OL BO X ASSY . CONTROL BO X ASSY ..
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 77 DCA-600SSK — CONTROL BO X ASSY . CONTROL BO X ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 1 8481812502 CONTROL BO X ........................................ 1 ......
P A GE 78 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) DCA-600SSK — CONTR OL BO X ASSY . CONTROL BO X ASSY ..
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 79 DCA-600SSK — CONTR OL BO X ASSY . CONTROL BO X ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 2 6 7971816104 BR A CKET , CIRCUIT BREAKER .............. 1 ......... S/N 3744467 AND BELOW 2 7 7971816304 BR A CKET , CIRCUIT BREAKER .
P A GE 80 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) DCA-600SSK — CONTR OL BO X ASSY . CONTR OL BO X ASSY ..
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 81 CONTR OL BO X ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 5 3 82608 SW ITCH ................................................... 1 ......... S/ N 3 69 24 3 4~3698616 ..
P A GE 82 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) DCA-600SSK — CONTR OL BO X ASSY . CONTROL BO X ASSY ..
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 83 CONTROL BO X ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 8 4 0602120498 SPEED SENSOR 1 8 5 0601815402 TERMINAL BOARD ................................. 1 ......... S/N 3698617 AND ABO VE 8 6 0027104020 MACHINE SCREW .
P A GE 84 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) DCA-600SSK — ENGINE & RADIA T OR ASSY . ENGINE & RADIA T OR ASSY .
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 85 DCA-600SSK — ENGINE & RADIA T OR ASSY . ENGINE & RADIA TOR ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 1 C4924200114 ENGINE .................................
P A GE 86 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) DCA-600SSK — ENGINE & RADIA T OR ASSY . ENGINE & RADIA T OR ASSY .
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 87 DCA-600SSK — ENGINE & RADIA T OR ASSY . ENGINE & RADIA TOR ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 3 9 0010108025 HEX. HEAD BOL T 4 4 0 031108160 PLAIN W ASHER .
P A GE 88 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) DCA-600SSK — ENGINE OPERA TING P ANEL ASSY . ENGINE OPERA TING P ANEL ASSY .
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 89 DCA-600SSK — ENGINE OPERA TING P ANEL ASSY . ENGINE OPERA TING P ANEL ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 1 C4484000602 SUPPORT LEG 1 2 012212035 HEX. HEAD BOL T .
P A GE 90 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) DCA-600SSK — OUTPUT TERMINAL ASSY . OUTPUT TERMINAL ASSY ..
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 91 DCA-600SSK — OUTPUT TERMINAL ASSY . OUTPUT TERMINAL ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 1 C4231700603 SET BOARD , OUTPUT TERMINAL 1 2 7521860504 OUTPUT TERMINAL 4 3 7521850504 B RA CKET , OUTPUT TERMINAL 4 4 0010112040 HEX.
P A GE 92 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) OUTPUT TERMINAL ASSY . DCA-600SSK — OUTPUT TERMINAL ASSY ..
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 93 DCA-600SSK — OUTPUT TERMINAL ASSY . 2 5 0030012000 HEX. NUT 4 2 6 7521865603 S T OPPER 1 2 7 0010108030 HEX. HEAD BOL T 1 2 7 020108060 HEX. NUT ......................
P A GE 94 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) DCA-600SSK — B A TTER Y ASSY . BA TTER Y ASSY ..
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 95 DCA-600SSK — B A TTER Y ASSY . BA TTER Y ASSY . NO P AR T NO P AR T NAME QTY .
P A GE 96 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) DCA-600SSK — MUFFLER ASSY . MUFFLER ASSY ..
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 97 DCA-600SSK — MUFFLER ASSY . MUFFLER ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 1 8482311002 MUFFLER 1 2 0019210020 HEX. HEAD BOL T 4 3 7432356504 P A CKING 2 4 7432356604 P A CKING 1 5 7432356704 P A CKING 1 6 0019110030 HEX.
P A GE 98 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) DCA-600SSK — FUEL T ANK ASSY . FUEL T ANK ASSY ..
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 99 DCA-600SSK — FUEL T ANK ASSY . FUEL T ANK ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 1 C4364000703 FUEL T ANK .............................................. 1 .....
P A GE 100 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) DCA-600SSK — ENCLOSURE #1 ASSY . ENCLOSURE #1 ASSY . THE SERIAL NUMBER MA Y BE REQUIRED .
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 101 ENCLOSURE #1 ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 1 C4414000102 BASE ....................................................................... 1 ......... S/N 3744467 AND BELOW 1 C4414000112 BASE .
P A GE 102 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) DCA-600SSK — ENCLOSURE #2 ASSY . ENCLOSURE #2 ASSY . THE SERIAL NUMBER MA Y BE REQUIRED .
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 103 ENCLOSURE #2 ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 1 C4444000003 REAR FRAME 1 2 3875151004 LOUVER P ANEL 1 3 0205006000 HEX.
P A GE 104 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) DCA-600SSK — ENCLOSURE #2 ASSY . ENCLOSURE #2 ASSY . THE SERIAL NUMBER MA Y BE REQUIRED .
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 105 DCA-600SSK — ENCLOSURE #2 ASSY . ENCLOSURE #2 ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 3 4 M9110100340 HINGE ....................................................
P A GE 106 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) DCA-600SSK — ENCLOSURE #3 ASSY . ENCLOSURE #3 ASSY . THE SERIAL NUMBER MA Y BE REQUIRED .
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 107 ENCLOSURE #3 ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 1 C4454201603 SPLASHER P ANEL ..................... 1 ....... S/N 3692434 - 3700696 1 C4454201613 SPLASHER P ANEL .
P A GE 108 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) DCA-600SSK — R UBBER SEAL ASSY . R UBBER SEAL ASSY ..
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 109 R UBBER SEAL ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 1 0228901640 R UBBER SEAL 6 2 0228900970 R UBBER SEAL 4 3 .
P A GE 110 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) DCA-600SSK — NAMEPLA TE AND DECALS NAME PLA TE AND DECALS.
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 111 NAME PLA TE AND DECALS NO P AR T NO P AR T NAME QTY . REMARKS CONTROL BO X G R OUP 1 Z0110001204 DECAL: DROOP , Z011000120 1 UP TO S/N 3693908 2 Z0110001304 DECAL: IDLE SPEED .
P A GE 112 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) DCA-600SSK — NAMEPLA TE AND DECALS NAME PLA TE AND DECALS.
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 113 DCA-600SSK — NAMEPLA TE AND DECALS NAME PLA TE AND DECALS NO P AR T NO P AR T NAME QTY . REMARKS PROCEDURE GROUP 2 3 C4551001002 DECAL: HANDLING PROCEDURES ..........
P A GE 114 — DCA-600SSK — OPERA TION AND P ARTS MANU AL (STD) — REV . #7 (04/30/10) Effective: October 1, 2002 TERMS AND CONDITIONS OF SALE — P AR TS P A YMENT TERMS T erms of pa yment f or par ts are net 10 days. FREIGHT POLICY All parts orders will be shipped collect or prepaid with the charges added to the invoice.
DCA-600SSK — OPERATION AND PARTS MANUAL (STD)— REV. #7 (04/30/10) — PAGE 115 NO TE P A GE.
Y our Local Dealer is: HERE’S HOW TO GET HELP PLEASE HA VE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING © COPYRIGHT 2010, MUL TIQUIP INC . MQ P ow er and the MQ P ower logo are registered trademarks of Multiquip Inc. and ma y not be used, reproduced, or altered without written permission.
Een belangrijk punt na aankoop van elk apparaat Multiquip DCA-600SSK (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Multiquip DCA-600SSK heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Multiquip DCA-600SSK vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Multiquip DCA-600SSK leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Multiquip DCA-600SSK krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Multiquip DCA-600SSK bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Multiquip DCA-600SSK kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Multiquip DCA-600SSK . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
