Gebruiksaanwijzing /service van het product UT-1 van de fabrikant Nikon
Ga naar pagina of 140
No reproduction in any fo rm of this manual, in whole or in par t (except for brief quotation in critical articl es or reviews), may be ma de without written authorization from NIKON CORPORATION.
ii What the UT-1 Can Do for Y ou Wha t the UT-1 Can Do f or Y ou This manual describes how to connect to a net work and upload pictures t o a compu ter or ftp server or c ontr ol the camer a remot ely using Came ra Con trol P r o 2.
iii What the UT-1 Can Do for Y ou Network C onnections Once a networ k connec tion has been establish ed, you can: Upload existing pictures ( 0 36) Control the camera remotely using Camera Control Pro.
iv What the UT-1 Can Do for Y ou T rademark Information Mac OS is a trademark of App le Computer , I nc. Microsoft, Windo ws, and Windows V ista are register ed trademar ks of M icrosoft Corp oration.
v Fo r You r S a fe t y Fo r Y o u r S a fe t y T o prevent damage to your N ikon product or injury to yourself or to others, read the following safety precautions in their entirety before using this equipment. Keep these safety instructions where all those who use the product will read them.
vi Fo r You r S a fe t y Avoid extended contac t Do not remain in contact with the ca mera, communication unit, battery, or charger for extended periods while the pr od ucts are on or in use. Parts of the product become hot; leaving the product in direct contact with the sk in for extended periods may result in low-temperature burns .
vii Notic es Notic es • No part of the manuals included wi th this product may be r eproduced , transmitted, transcribed, stored in a retrieval system, or translated into any language in any form, by any means, without Nikon ’ s pr ior written permission.
viii Notic es Notice f or Customers in the U .S.A. ❏ U.S.A. F e deral Comm unications Commission (FC C) Declaration of Conformity FCC Radio F requency Inter fere nce Stat ement This equipment has been tested and found to comply with the limits f o r a Class B digital device, pursuant t o Part 15 of the FCC rules.
ix Notic es Notices f or Customers in C anada CAU TION : This class B digital apparatus complies with Canadian ICES-003. A TTENTION : Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.
x T able of C ontents What the UT-1 Can Do f or Y ou ................................................................................. ii F or Y our Safety ...............................................................................................
xi Menu Guide ........... ............ ............. ................ .................. 71 Mode ........................................................................................................................... .... 72 Choose Pr ofile ......
xii A Backgr ound Knowledge This manual assumes basic k nowledge of ftp ser vers and local area networks (LANs). F or more information on installing, configuring, and using devices in a network, contact the manufac turer or network administrator . A Illustrations The Nikon D800 and D800 menus are used in this manual for illustrative purposes.
Introduction 1 Intr oduc tion Thank you for your purchase of a UT-1 communication unit for compatible Nikon digital cameras . Please read this manual thoroughly and keep it where all those who use the product can read i t.
2 Par ts of t he U T- 1 Introduction P ar ts of the UT-1 6 7 9 8 11 10 12 5 3 13 14 2 1 4 1 Peripheral connector cov er 2 Peripheral connector 3 Po wer switch ................... 35, 43, 64 4 Status LEDs ............................... 3 , 40 POWER (green/yello w), LINK (gr een), ERROR (orange) 5 Eyelet for strap 6 USB connector .
3 Par ts of t he U T- 1 Introduction A The POWER LED When the UT-1 is on, the POWER LED glows green to indicat e that the battery is fully charged or that an A C adapter is connected. A t battery levels below 10%, it will fl ash green to warn that the b attery requires charging.
4 Par ts of t he U T- 1 Introduction A Attaching the UT -1 The UT-1 can be mounted on a tripod or the camera accessor y shoe. T o mount the UT -1 on the camera when a flash unit or other acc essor y is mounted on the accessory shoe, use an optional SK-7 bracket.
5 Par ts of t he U T- 1 Introduction A USB Cable Gaskets and Connector Cov ers The USB cable gaskets and connector covers prev ent accidental disconnections. Attach as shown below . Camera When connecting the USB cable to a D4, attach the optional UF-1 connector cover as shown.
6 Supported Modes Introduction Suppor te d Modes The UT-1 connects the camera to Ethernet and, with the addition of an optional W T -5 wi reless tr ansmitter , wireless networks . Photogr aphs on the camera can then be tr ansmitted to a computer ftp server and the came ra controlled remotely from a computer .
7 Supported Modes Introduction A FTP Servers Ser vers can be configured using standard ftp ser vices available with suppor ted operating systems, such as IIS (Internet Information Ser vices). Connection to computers on other net works via a router , Internet ftp connections and ftp ser vers running third-part y software are not suppor ted.
Suppor ted Modes / Connecting the WT -5 Introduction 8 C onnecting the W T -5 The UT-1 can be used in combina tion with the optional W T -5 wireless transmitter t o connec t to wireless LANs . The W T -5 connects as described below . 1 Open the UT-1 peripheral c onnector cover.
9 Wor k f lo w Introduction Wo r k f l o w When using the UT-1 for the first time, follow the steps below to set up the UT-1, instal l the requir ed software and uplo ad pictures to the com puter . 1 Set up the UT-1 and install softw are ( 0 2). 1-1 Preparing the UT-1 1-2 Installing the Wireless T ransmitter Utility 2 Upload pictures.
10 Preparing the UT-1 Introduction Pr eparing the UT-1 I nser ting the Battery T o prevent loss of power during setup or upload, use a fully- charged ba ttery or an optional AC a dapter . The UT- 1 takes one EN-EL15 recharge able Li-ion battery ; other batteries can not be used.
11 Preparing the UT-1 Introduction A Removing the Battery Being careful not to drop the batter y , open the batter y-chamber cover and remove the batter y as shown at right.
12 Preparing the UT-1 Introduction C onnecting the Adapter 1 Insert the power c onnector . Open the UT-1 batter y-chamber ( qw ) and power connector ( e ) covers and then inser t the EP-5B power c onnector in the orientation sh own ( r ).
13 Preparing the UT-1 Introduction 3 Plug the adapter in. If the adapter pow er lamp does not light when the adapter is plugged in, consult a Nikon-authorized ser vice representativ e. 4 T urn the UT-1 on. Press the power switch for about a second to turn the UT -1 on.
14 Installing the Wireless T ransmitter Utilit y Introduction Installing the W ireless T ransmitter Utility This section describes how to install the Wireless T ransmitter Utility.
15 Installing the Wireless T ransmitter Utilit y Introduction 1. Be sure to upda te to the latest ver s ions of the UT-1 firm ware and supplied software. 2. F or the latest information on suppo rt ed operating systems, see the Nikon website for y o ur area ( 0 xii).
16 Installing the Wireless T ransmitter Utilit y Introduction ❏ Installing Software Befor e connecting to a n etwork, install the Wir eless T ransmitter Utility. The W ireless T ransmitter Utility is required for pairing in image transfer and PC modes and can be used to create network profiles.
17 Installing the Wireless T ransmitter Utilit y Introduction 3 Star t the installer . Click Next (W i n d o w s ) o r Con ti nu e (Mac OS) an d follow the on-screen instructions. 4 Exit the installer . Click OK (W i n d o w s ) o r Close (Mac OS) when insta llation is comple te.
18 Installing the Wireless T ransmitter Utilit y Introduction.
Using the UT-1 with a Computer 19 U sing the UT-1 with a C omputer The UT-1 ca n be used in the fo llo wing modes (thumbnail selec t and printer modes are not supported): • Tr an s f e r mo d e : Upload images to a computer . • PC mode : Control the camera fr om a computer using Camera Control Pr o 2 (available se parately).
Copying Network Profiles to the Camera Using the UT-1 with a C omputer 20 C opying Network P rofiles to the Cam e ra Before copying network profiles, confirm that the c o mputer is running and the user is logged in. 1 Connect the USB cable supplied with the camera.
Copying Network Profiles to the Camera Using the UT-1 with a Computer 21 4 The dialog shown below will be displayed; click Next . 5 Sel ect WT - 4 and click Next (note that you should selec t WT -4 even when the UT-1 is co nnected to a W T -5 wireless transmitt er).
Copying Network Profiles to the Camera Using the UT-1 with a C omputer 22 6 Select A d d/Edit profiles and click Ne x t ..
Copying Network Profiles to the Camera Using the UT-1 with a Computer 23 A The “Select Action” Dialog The other options in the “Selec t Action” dial og are described below .
Copying Network Profiles to the Camera Using the UT-1 with a C omputer 24 7 Select A d d new profile and click Next ..
Copying Network Profiles to the Camera Using the UT-1 with a Computer 25 8 Enter the following information and click Ne xt : • Profile name : Enter a name of up to 1 6 charac ters.
Copying Network Profiles to the Camera Using the UT-1 with a C omputer 26 9 Select Manual setup and click Next ..
Copying Network Profiles to the Camera Using the UT-1 with a Computer 27 A “A u t o m a t i c S e t u p ” Choose Automatic setup (recommended) when using a new network for the first time. The following dialog will be displayed; select Ad h oc , or selec t Infrastructure network (recommended) and choose a network from the pull- down menu.
Copying Network Profiles to the Camera Using the UT-1 with a C omputer 28 10 Enter the following inf ormation and click Next . • Network name (SSID) : Enter a networ k name or choose from a list of existing n etworks. Do not chan ge the name if it is supplied automatically .
Copying Network Profiles to the Camera Using the UT-1 with a Computer 29.
Copying Network Profiles to the Camera Using the UT-1 with a C omputer 30 11 If the network is config ured to supply IP addresses aut o mati- cally using a DHCP server o r Auto IP , selec t Obtain IP address automatically and click Next .
Copying Network Profiles to the Camera Using the UT-1 with a Computer 31 12 Confirm that settings are corr ec t and click Next . 13 Sel ect Fin is h w iz a rd and click Next .
Copying Network Profiles to the Camera Using the UT-1 with a C omputer 32 14 T urn the camera off and disconnect the USB cab le. The network p rofile ha s now been cop ied to the camera. P roceed to “Uploading Pictures to a Host Computer” ( 0 33) or “PC Mode” ( 0 42).
33 Uploading Pictures to a Host Computer / Con nec ting th e UT-1 Using the UT-1 with a Computer Uploading Pictures to a Host C omputer C onnec ting the UT-1 Before connecting th e UT-1, co nfirm that the host compute r is running and the user is logged in.
34 Uploading Pictures to a Host Computer / Con nec ting th e UT-1 Using the UT-1 with a C omputer 4 T urn the camera on. 5 Select T ransfer mode for the W ireless transmitter > Mode option in the camera setup menu ( 0 72). 6 A list of available conne ction profiles will be displayed.
35 Uploading Pictures to a Host Computer / Con nec ting th e UT-1 Using the UT-1 with a Computer 8 Press the power switch for about a second to turn the UT -1 on. 9 Confirm that the selected profile is displayed in green in the top level of the wireless transmitter menu.
36 Uploading Pictures to a Host Co mputer / Uploading Images Using the UT-1 with a C omputer Uploading Images 1 Pr ess the K button to view pic tures on the memo r y card. Display the first picture to be sent in single -image playback or highlight it in the thumbnail list.
37 Uploading Pictures to a Host Co mputer / Uploading Images Using the UT-1 with a Computer 3 Press the power switch for about a second to turn the UT-1 off.
38 Uploading Pictures to a Host Co mputer / Uploading Images Using the UT-1 with a C omputer A Loss of Signal T ransmission may be interrupte d if the signal is lost ( 0 40).
39 Uploading Pictures to a Host Co mputer / Uploading Images Using the UT-1 with a Computer ❏ T ransfer Status During playback, the status of images selec ted for upload is shown as follo ws: a : “Send” Images that hav e been selected for up load are marked with a whit e a icon.
40 Uploading Pictures to a Host Co mputer / Uploading Images Using the UT-1 with a C omputer ❏ Network S tatus The status of the link bet ween the host and th e UT-1 is shown by the status LEDs and by the display in the top level of the wireless transmitter menu.
41 Uploading Pictures to a Host Co mputer / Uploading Images Using the UT-1 with a Computer The Status Display Network status can also be view ed in the top lev el of the wireless transmitter menu. Sig nal stren gth : W ireless signal strength. Ethernet connections are shown by d .
42 PC M ode / Con nec ting to the Com puter Using the UT-1 with a C omputer PC Mode I n P C m o d e, a c a m e r a e q u i pp e d w it h a U T - 1 c a n b e c o n t r o l l e d o v e r a wireless or E.
43 PC M ode / Con nec ting to the Com puter Using the UT-1 with a Computer 3 Tu r n t h e c a m er a o n . 4 Sel ect PC mode for t he Wi reless transmitter > Mode option in the camer a setup me nu ( 0 72). 5 A list of a vailable connection pr ofiles will be displayed .
44 PC M ode / Con nec ting to the Com puter Using the UT-1 with a C omputer 7 When a connection is established, the network name will be display ed in green in the top level of th e wireless transmitter menu. F or information on what to do if an error is displa yed , see “ T roubleshooting ” ( 0 119).
45 PC Mode / Co ntrolli ng the Camera Using the UT-1 with a Computer Control lin g t he Ca me ra 1 Complete the steps in “Connec ting to the Compute r” ( 0 42). 2 Sta r t Ca mera Contro l Pro 2 o n th e ho st computer and con firm that “PC ” is displayed in the camera control panel .
46 PC Mode / Co ntrolli ng the Camera Using the UT-1 with a C omputer ❏ Network S tatus The status of the link bet ween the host and th e UT-1 is shown by the status LEDs and by the display in the top level of the wireless transmitter menu. The Status LEDs The POWER LED lights when the UT-1 is o n.
47 PC Mode / Co ntrolli ng the Camera Using the UT-1 with a Computer The Status Display Network status can also be view ed in the top lev el of the wireless transmitter menu. Signal str ength : Wireless signal strength. Ethernet connections are shown by d .
PC Mode Using the UT-1 with a C omputer 48.
Uploading Pictures to an ftp S erver 49 Uploading P ic tures to an f tp S er v er F ollow the steps belo w to upload pictures to an ftp ser ver ov er wireless or Ethernet net works.
50 Copying Network Profiles to the Camera Uploading Pictures to an f tp Ser ver C opying Network P rofiles to the Cam e ra Before copying network profiles, confirm that the c o mputer is running and the user is logged in. 1 Connect the USB cable supplied with the camera.
51 Copying Network Profiles to the Camera Uploading Pictures to an ftp S erver 4 The dialog shown below will be displayed; click Next . 5 Sel ect WT - 4 and click Next (note that you should selec t WT -4 even when the UT-1 is co nnected to a W T -5 wireless transmitt er).
52 Copying Network Profiles to the Camera Uploading Pictures to an f tp Ser ver 6 Select A d d/Edit profiles and click Ne x t . 7 Select A d d new profile and click Next .
53 Copying Network Profiles to the Camera Uploading Pictures to an ftp S erver 8 Enter the following information and click Ne xt : • Profile name : Enter a name of up to 1 6 charac ters.
54 Copying Network Profiles to the Camera Uploading Pictures to an f tp Ser ver 9 Select Manual setup and click Next ..
55 Copying Network Profiles to the Camera Uploading Pictures to an ftp S erver A “A u t o m a t i c S e t u p ” Choose Automa tic setup when using a new net work f or the first time. The following dialog will be displayed; select Ad h oc , or selec t Infrastructure network (recommended) and choose a network from the pull-down menu.
56 Copying Network Profiles to the Camera Uploading Pictures to an f tp Ser ver 10 Enter the following inf ormation and click Next . • Network name (SSID) : Enter a networ k name or choose from a list of existing n etworks. Do not chan ge the name if it is supplied automatically .
57 Copying Network Profiles to the Camera Uploading Pictures to an ftp S erver.
58 Copying Network Profiles to the Camera Uploading Pictures to an f tp Ser ver 11 Remove th e check fr om Obtain IP address automatically and enter the following information. Click Next to proceed when entr y is complete. • IP address : Enter an IP address for the UT-1.
59 Copying Network Profiles to the Camera Uploading Pictures to an ftp S erver 12 Enter ftp settings and click Next . • FTP server : Enter the URL or IP a ddress of the ftp ser ver . • FT P se rve r po rt : Enter the port number for the ftp ser ver .
60 Copying Network Profiles to the Camera Uploading Pictures to an f tp Ser ver 13 Confirm that settings are correct and click Ne xt . 14 Select Fini sh w iza rd and click Next .
61 Copying Network Profiles to the Camera Uploading Pictures to an ftp S erver 15 Press the po wer switch for about a sec- ond to turn the camera off and discon- nect the USB cable. The network profile has n ow been copied to the camera. Proceed to “Connectin g to the f tp Ser ver” ( 0 62).
62 Connecting to the ftp Ser ver Uploading Pictures to an f tp Ser ver C onnec ting to the f tp Ser v er Befor e connecting the UT-1, c onfirm that the host c o mputer is running and the user is logged in.
63 Connecting to the ftp Ser ver Uploading Pictures to an ftp S erver 4 Tu r n t h e c a m er a o n . 5 Sel ect T ransfer mode for t he Wi reless transmitter > Mode option in the camer a setup me nu ( 0 72). 6 A list of a vailable connection pr ofiles will be displayed .
64 Connecting to the ftp Ser ver Uploading Pictures to an f tp Ser ver 7 Select W ireless transmitter > T ransfer settings and adjust settings as described on pages 89–90.
65 Uploading Images Uploading Pictures to an ftp S erver Uploading Images 1 Pr ess the K button to view pictures on the memory card. Display the first picture to be sent in single-imag e playback or highlight it in the thumbnail list.
66 Uploading Images Uploading Pictures to an f tp Ser ver 3 Pr ess the power switch for about a second to turn the UT -1 off , then disconnect the USB cable and UT-1. The destination folder can be selected using the Wir e less T ransmitter Utility ( 0 23, 59).
67 Uploading Images Uploading Pictures to an ftp S erver ❏ T ransfer Status During playback, the status of ima ges selected for uploaded is shown as follows: a : “Send” Images that hav e been selected for up load are marked with a whit e a icon.
68 Uploading Images Uploading Pictures to an f tp Ser ver ❏ Network S tatus The status of the link bet ween the host and th e UT-1 is shown by the status LEDs and by the display in the top level of the wireless transmitter menu. The Status LEDs The POWER LED lights when the UT-1 is o n.
69 Uploading Images Uploading Pictures to an ftp S erver The Status Display Network status can also be view ed in the top lev el of the wireless transmitter menu. Sig nal stren gth : W ireless signal strength. Ethernet connections are shown by d . Status ar ea : The status of the connection to the host.
70 Uploading Images Uploading Pictures to an f tp Ser ver.
Menu Guide 71 Menu Guide This section describes the settings available for th e Wireless tr ansmitter option in the camera setup menu when the UT-1 is connecte d.
72 Mode / Choose Profile Menu Guide Mode Choose from tr ansfer ( 0 33) and PC ( 0 42) modes; thumbnail select and print modes are not supp orted. S electin g either option displays a profile list showing t he connecti ons available in the sele cted mode.
73 Mode / FTP Re gist ration ( T ransf er Mod e Only) Menu Guide FTP Registra tion ( T ransfer Mode Only) In transfer mo de, ftp profiles can be created without using the Wireless T ransmitter Util ity . See the Appendix for more information ( 0 116).
Mode / Editing ftp Profiles (for Connection to f tp Ser vers Only) / Wireless Menu Guide 74 ❏ Wir e l e s s This option contains settings for connection to a wireless networ k and is only displayed if the inter face ty pe for the selected profile is Wi reless & Ethernet .
Mode / Editing ftp Profiles (for Connection to f tp Ser vers Only) / Wireless Menu Guide 75 Chann el * 1 Choose a channel. 2 Return to the wireless menu (1/2). * Not required if Infrastructure is selected for C ommunication mode . Authen ticati on : Choose th e type o f authentication used by the computer or access point.
Mode / Editing ftp Profiles (for Connection to f tp Ser vers Only) / Wireless Menu Guide 76 Wire le ss Me nu, Pag e 2/ 2 Encryption 1 Highlight an encr yption method.
Mode / Editing ftp Profiles (for Connection to f tp Ser vers Only) / Wireless Menu Guide 77 4 Edit the encr yption key: • Base 16 : Enter the key as described on page 73 . 64-bit keys requir e 10 digits, 128-bit keys 26 digits, TKIP and AES keys 64 digits.
Mode / Editing ftp Profiles (for Connection to ft p Ser vers Only) / TCP/IP Menu Guide 78 ❏ T CP/IP Adjust T CP/IP settings as described on the following pages . The TC P/IP menu has two pages of options; to scroll betw een pages, press the multi selector up or down.
Mode / Editing ftp Profiles (for Connection to ft p Ser vers Only) / TCP/IP Menu Guide 79 4 Exit to the T CP/IP menu (1/2). If a sub-net mask is required, proceed t o Step 5. 5 Highlight Mask . 6 Enter edit mode. 7 Choose a sub-net mask . 8 Exit to the T CP/IP menu (1/2).
Mode / Editing ftp Profiles (for Connection to ft p Ser vers Only) / TCP/IP Menu Guide 80 TCP /I P Me nu, Pag e 2/ 2 Use gateway : H ighlight this option and press the multi selector right t o toggle it on ( M ) or off .
Mode / Editing ftp Profiles (for Connection to ft p Ser vers Only) / TCP/IP Menu Guide 81 Enable DNS : Highlight this option and press the multi selector right to toggle it on ( M ) or off. If a Domain Name S er ver (DNS) exists on the network , turn this optio n on and ente r the address supplied by the network administrator as described belo w.
Mode / Editing ftp Profiles (for Connection to f tp Ser vers Only) / FTP Menu Guide 82 ❏ FTP Adjust ftp settings as described on the following pages . The ftp menu has thr ee pages of options; to scroll betw een pages, press the multi selector up or down.
Mode / Editing ftp Profiles (for Connection to f tp Ser vers Only) / FTP Menu Guide 83 5 Highlight Folder . 6 Display the text entr y dialog. 7 Enter the destination folder name ( 0 73).
Mode / Editing ftp Profiles (for Connection to f tp Ser vers Only) / FTP Menu Guide 84 10 Enter edit mode. 11 Pr ess the multi selector left or right to select, up or down to change. 12 Return to the ftp menu (1/3). P ASV mode : Highlight this option and press the multi selector right to toggle P ASV mode on ( M ) or off .
Mode / Editing ftp Profiles (for Connection to f tp Ser vers Only) / FTP Menu Guide 85 FTP Menu, P age 2/3 Anonymous login : Highlight this option and press the multi selector ri ght to togg le it on ( M ) or off . T urn this option on for anonymous login, off to enter a u ser nam e and p assword as described below .
Mode / Editing ftp Profiles (for Connection to f tp Ser vers Only) / FTP Menu Guide 86 5 Highlight Pa ss wo rd . 6 Display the text entry dialog. 7 Enter a password ( 0 73).
Mode / Editing ftp Profiles (for Connection to f tp Ser vers Only) / FTP Menu Guide 87 FTP Menu, P age 3/3 Use prox y ser ver : Highlight this option and press the multi selector right to toggle it on ( M ) o r off . If a proxy ser ver is required f or f tp, tu rn this option on and enter an address and port number as described below .
Mode / Editing ftp Profiles (for Connection to f tp Ser vers Only) / FTP Menu Guide 88 5 Highlight Po r t . 6 Enter edit mode. 7 Pr ess the multi selector left or right to select, up or down to change.
89 T ransf er Setting s / Auto Send Menu Guide T ransf er Settings ( T ransfer Mode Only) The following settings are available in tr ansfer mode: Aut o S e nd Choose wheth er to upload photographs to the ser ver as they are taken. * Pictures will not be uploaded to the ser ver when the UT-1 is turned off .
90 T ransf er Setting s / Send F ile As Menu Guide Send F il e A s When uploading NEF + JP EG images to an ftp ser ver , choose whethe r to send both NEF (RA W ) and JPEG files or on ly the JPEG files. Send F olde r Upload all files in sele cted folders (including those already marked as “sen t”).
Print Menu Guide 91 Pri nt (Print Mode Only) The UT-1 does not suppo rt t his option..
92 Dev ice I nfo / Batte r y In fo Menu Guide Devic e Info This menu displays the following information about the UT-1. This option is only available when the UT-1 is connec ted to the camera via USB and the UT-1 is on.
93 Device Setting s / Auto P ower O ff Menu Guide Device Settings F or mat the transmitter ’ s internal memor y and choose the delay before the UT-1 turns off automa tically. This option is only availa ble when the UT-1 is c onnected to the camer a via USB and the UT-1 is on.
Device Setting s Menu Guide 94.
App endi ces 95 Appendic es Crea ting an FTP S er ver Images can be uploaded t o ftp ser vers crea ted using the standar d ftp services included with Windo ws 7 (Prof e ssional/Ent erprise/ Ultimate), W indows Vista ( Ultimat e/Business/Enterprise), W indows XP Prof essional, and Mac OS X.
96 Creating an FTP Server Appendices Wi n d ows 7 1 Go to Network and Sharing C enter . Click Star t > Con tr ol Pan el > Network and Internet > Network and Sharing C enter . 2 Display the network adapter list . Click Change adapter settings .
97 Creating an FTP Server App endi ces 4 Display T CP/IP settings . Sel ect Internet P rotocol V ersion 4 ( T CP/IP v4) and click Properties . 5 Enter an IP address and subnet mas k. Enter an IP address and subnet mask for the ftp server and click OK .
98 Creating an FTP Server Appendices 6 Close the netw ork proper ties dialog. Click Close . 7 Op en Ad mi ni st ra ti v e T o ol s. Click Star t > Con tr ol Pan el > Syste m an d S ecu rit y > Administrativ e T ools .
99 Creating an FTP Server App endi ces 8 O pen the IIS manager . Double-click Internet Information Services (IIS) Manager . 9 Sel ect Add F TP S it e… .
100 Creating an FTP Server Appendices 10 Enter site in formation . Name the site and choo se the path to the folder that will be used for ftp upload. Click Next to proceed. A Anonymous Login T o allow anonymous login, select a folder in the user ’ s public folder as the conte nt di rect or y.
101 Creating an FTP Server App endi ces 11 Choose binding and SSL options. Select the IP address enter ed in Step 5, note the port number , select Start FTP site automatically , and check No SSL .
102 Creating an FTP Server Appendices 12 Choose authentication options. Adjust settings as desc ribed below and click Fin i sh . • Authentication : Basic • Allow access to : All users • Permissi.
103 Creating an FTP Server App endi ces Wi n do w s Vi s t a 1 Display network connec tions. Click Start > Co nt ro l Pa ne l > Network and Internet Set ti ng s > Network C onnec tions > Manage Network Connections . 2 O pen the network pr oper ties dialog.
104 Creating an FTP Server Appendices 4 Display T CP/IP settings. Select In ternet Protoc ol V ersion 4 (TCP/IPv4) and click Properties ..
105 Creating an FTP Server App endi ces 5 Enter an IP address and subnet mas k. Enter an IP address and subnet mask for the ftp server and click OK . 6 O pen Administrativ e T ools. Click Start > Co nt ro l Pa ne l > Sy stem and Maintenance > Adm ini st rative T o ols .
106 Creating an FTP Server Appendices 7 Open the IIS manager . Double- click Internet Information Ser vices (IIS) 6.0 Manager . 8 Click Allow . A “User Account Control” dialog will be displayed; click Allow .
107 Creating an FTP Server App endi ces 9 Display ftp site proper ties. Right-click Default FTP Site and select Pro per tie s ..
108 Creating an FTP Server Appendices 10 Selec t the address and por t number . Select the IP address en tered in Step 5 and en ter a TCP p o r t number .
109 Creating an FTP Server App endi ces 11 Choose a home director y . Ope n the Home Directory tab and select A directo ry located on this comp uter . The root dir ec tory for images uplo aded to the ftp ser ver is listed in the Local path tex t box; choose a folder an d select Read , Wri te , an d Log vis it s .
110 Creating an FTP Server Appendices Wi n d ows XP 1 Display network c onnec tions. Click Star t > Con tr ol Pan el > Network and Internet Settings > Network C onnections . 2 Open the network properties dialog. If you are connecting via Ethernet, right- click Local Area Con ne c t i on and select Prope r ties .
111 Creating an FTP Server App endi ces 4 Enter an IP address and subnet mas k. Enter an IP address and subnet mask for the ftp server and click OK . 5 O pen Internet Inf o rmation Services. Click Start > Co nt ro l Pa ne l > Sy stem and Maintenance > Adm ini st rative T o ols and open the Internet Information Servi ces co ns ol e.
112 Creating an FTP Server Appendices 6 Display ftp site proper ties. Right-click Default FTP Site and select Pr operties . 7 Selec t the address and por t number .
113 Creating an FTP Server App endi ces 8 Choose a home director y . Open the Home Directory tab and select a direc tory located on this comp uter . The root dir ec tory for images uplo aded to the ftp ser ver is listed in the Local path tex t box; choose a folder an d select Read , Wri te , an d Log vis it s .
114 Creating an FTP Server Appendices Mac OS X 1 0.6 1 Display network settings . Open S ystem Pr eferences and click Netw ork . 2 Adjus t networ k settings . Click the type of netwo rk you will use t o connect to the server , enter an IP address, and note the subnet mask.
115 Creating an FTP Server App endi ces 4 Display file sharing options . Sel ect F ile Sharing and click Opt ion s . 5 Tu r n f t p f i l e s h a r i n g o n .
116 Creating ftp Profiles Using Camera Menus Appendices Creating ftp Profiles U sing Camer a Menus In transfer mode, the camera menus can be used in place of the Wireless T ransmitter Utility to create ftp profiles. Befor e creating an f tp profile with the camera menus , connect the UT-1.
117 Creating ftp Profiles Using Camera Menus App endi ces 3 Press the power switch for about a second to turn the UT -1 on. 4 Sel ect T ransfer mode for Wireless transmit ter > Mode ( 0 72). 5 A profile list will be displayed showing the connec tions available in transfer mode.
118 Creating ftp Profiles Using Camera Menus Appendices Interf ace type : The dialog shown at right will be displayed. Highlight one of the follo wing options and press the J button to return t o the reg istration dialog.
119 T roubleshooting App endi ces T roubleshooting Prob le m Solut ion Pa ge “POWER” LED does not light. • T urn th e UT-1 on. • Confirm that the batter y is inserted and fully charged . 35, 43, 64 10, 92 Wir eless transmitter option n ot av ailable .
120 T roubleshooting Appendices T ransfer interrupted before all photographs are sent. T ransfer will resume if UT-1 is turned off and then on again. 35, 43, 64 USB cable disconnec ted during transmission. Reconnec t the USB cable. Do not turn the camera off.
121 Specifications App endi ces Specifications ❚❚ Communication Unit UT-1 Ethernet Standar ds IEEE 802.3u (100 base- T X)/IEEE 802.3 (10 base-T ) Data rates 10/100 Mbps with auto detect Por t 100 base - T X/10 base- T (AUT O-MDIX) Wireless ( W T-5) Standar ds WT- 5/WT-5A/WT -5B/WT-5C : 802.
122 Specifications Appendices * With large an tenna at wireless LAN access point. Range may vary with signal strength and presence or absence of obstacles. † Maximum lo gical data rates according t o IEEE standard. Actual rates may differ . Wire les s ( W T-5) Data rat es † IEEE 802.
123 Specifications App endi ces A Battery Life The length of time batteries can be us ed an d the number of shots that can be uploaded before r ec harging varies with the condition of the batteries , signal strength, and how camera and UT-1 ar e used.
124 Ind ex Appendices Index Symbols a : “Send” .. ............ ............ ............ ....... 39 , 67 b : “Sending” ..... ............ ............. ......... 39, 67 c : “Sent”......... ............ ................... ....... 39 , 67 A Ad-hoc .
125 Ind ex App endi ces Wireless............... ............ ............ ........ 74, 118 Wireless LAN access point .......... .................... ............ ... 74 Wireless transmitter .................... ............ .71 Wireless Transmitter Utility .
126.
.
No reproduction in any fo rm of this manual, in whole or in par t (except for brief quotation in critical articl es or reviews), may be ma de without written authorization from NIKON CORPORATION.
Een belangrijk punt na aankoop van elk apparaat Nikon UT-1 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Nikon UT-1 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Nikon UT-1 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Nikon UT-1 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Nikon UT-1 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Nikon UT-1 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Nikon UT-1 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Nikon UT-1 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
