Gebruiksaanwijzing /service van het product CafeRomatica 855 van de fabrikant Nivona
Ga naar pagina of 29
1 A B C D E S O P N R H F G I M K L Q T U J 2 5 8 1 1 3 6 9 1 2 4 7 1 0 D 4.
C a f e R o m a t i c a Op erat ing In st ruct ion s a nd Use ful T ip s Fu lly aut oma ti c co ffe e c en tre A pa ssio n fo r co ffee . T ext display (main menu) Rotary control knob Button „>.
1. SAFETY INSTRUCTIONS ....................................................... 62 2. SET UP................................................................................ 64 2.1 Preparing the machine ..................................................
1. Safety instructions • This machine may only be used for the intended purpose (domes- tic use) and is not for commercial application – see guarantee conditions. Otherwise, claims under the guarantee will not be accepted. • Operating voltage must be the same as mains voltage.
2. Set up 2.1 Preparing the machine ! Carefully remove the machine and all parts from the packaging. The following items are packaged with the machine: • User manual • Abridged user manual for use.
as the lter softens the water . The machine’ s default factory setting is “Insert lter? No”. ! T urn the Rotary control knob to select “Insert lter? Y es”, so that the machine knows that the lter is being inserted. ! Press the Rotary control knob.
Please note: If no red dot appears, set water hardness to level 1. Set the water hardness level on your machine as follows: ! T urn the Rotary control knob to select the appropriate water hard- ness level. ! Press the Rotary control knob to con rm your selection.
! Empty the water reservoir (Image 1/F and 2) and carefully screw the lter into the holder provided in the water reservoir using the assembly tool on the end of the measuring spoon (Image 4). Caution: Be careful not to turn too far or to cause it to snap off.
“Normal”, “High”, “Maximum” or “Individually”. The factory setting is “High”. By following the procedure described below , you will set the same temperature for all speciality coffees. However , you can also set the temperature individually for each spe- ciality coffee (see 4 below).
! From here, you can either continue and program the other time settings, or leave the settings by pressing the exit button. 3.4.3 Setting the automatic switch-off time Using this function, you can set how long the machine will stay on after its last use before automatically switching into stand-by mode.
machine heats up again and needs to be rinsed so that it always uses fresh water . The display screen indicates when rinsing is required, and the rinsing function must be started manually by pressing the Rotary control knob.
button to abort any brewing process currently in progress. • height-adjustable spout (Image 1/E): Y ou can adjust the spout up or down to suit the size of your cup or glass. The selected speciality coffee is shown on the display screen by a symbol, e.
! T urn the Rotary control knob to the tool symbol, „settings“. Press the Rotary control knob. ! T urn the Rotary control knob to “Coffee recipes”. Press the Rotary control knob. ! T urn the Rotary control knob to “Espresso”. Press the Rotary con- trol knob.
4.2 Brewing a Café Crème The standard factory setting for Café Crème is: aroma “normal”, volume per cup 120ml, 1 cup. The display screen shows: the 3-bean symbol, “120 ml”, the 1xcup symbol. Y ou can brew your Café Crème in two different ways: 1.
select your setting. ! Y ou can apply your settings by pressing the exit button or by mak- ing no further changes. Please note: Do not forget whether you are brewing one or two cups, and put the cup(s) under the spout as required (Image 6). ! Press the Rotary control knob to start brewing your coffee.
(Normal, High, Maximum). Press the Rotary control knob to con- rm your selection. ! From here, you can either continue and program the other set- tings, or leave the settings by pressing the exit button.
! T urn the Rotary control knob to “Cappuccino”. Press the Rotary control knob. The possible settings for aroma, amount, proportion of coffee, amount of froth and temperature (if the setting in the temperature menu is “individually” – see 3.
! While the symbol is ashing, turn the Rotary control knob to select your setting. After the bean symbol for aroma, the “ml” display for amount, and then the “%” display for proportion of coffee, will ash in the middle of the bottom line, so you can change these parameters at any time.
! Selecting amount of milk ! T urn the Rotary control knob to “Amount milk”. Press the Rotary control knob. ! T urn the Rotary control knob to the amount of your choice.
1. Y ou can either use the standard settings from the “Coffee recipes” menu. These are the factory settings which you can nevertheless change individually to suit your own taste, as described below . 2. Or you can change the setting according to your taste for each individual drink prepared.
! In the main menu, turn the Rotary control knob to “Hot water“, the hot water symbol. ! Press the > button (Image 1/C) until the “ml” display ashes on the display screen to indicate that you can change the amount. ! While the symbol is ashing, turn the Rotary control knob to your desired setting.
! While the symbol is ashing, turn the Rotary control knob to select your setting. ! Y ou can apply your settings by pressing the exit button or by mak- ing no further changes. Please note: Do not forget whether you are brewing one or two cups (850 model only for drinks with milk), and put the cup(s) under the spout as required (Image 6).
Caution: The pre-ground coffee chamber is not a storage unit, so please only add one portion at a time, and only use fresh or vacuum-packed pre-ground coffee produced from coffee beans. Do not use water -soluble instant coffee! 5. Cleaning and maintenance 5.
! Remove, empty and clean the drip tray and the used coffee tray (Images 1/N and 1/O) and put them back in the machine. 5.4 Cleaning the system Please note: When the machine has to be cleaned, the following mes- sage will appear on the display screen: “Please clean”.
Caution: Always rst add water up to the 0.5l mark and then add the descaling agent – never the other way round! Follow the descaling agent manufacturer’s instructions. ! Connect one end of the hose to the height-adjustable spout (Im- age 7). ! Place the other end of the hose into the drip tray at the rear on the right (Image 10).
Please note: Y our machine is equipped with moving rear rollers (Image 1/Q) and can be moved on a level work surface. So you can also clean underneath the machine. 5.7 Cleaning the brewing unit Caution: Only remove the brewing unit when the machine is in stand-by .
Message Meaning What to do FILL-UP PIPE-SYSTEM Fill or rinse out water hoses (inside) ! Press Rotary control knob Fresh water lter in use may be faulty ! remove or change the lter cartridge FI.
8. Accessories Y ou can purchase new accessories from any well-stocked specialist retailer or contact your national distributor . CLARIS lter cartridge NIRF 700: The CLARIS lter cartridge NIRF.
NIVONA Apparate GmbH Fritz-Haber -Straße 10 D-90449 Nürnberg www .nivona.com © 2010 by NIVONA.
Een belangrijk punt na aankoop van elk apparaat Nivona CafeRomatica 855 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Nivona CafeRomatica 855 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Nivona CafeRomatica 855 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Nivona CafeRomatica 855 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Nivona CafeRomatica 855 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Nivona CafeRomatica 855 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Nivona CafeRomatica 855 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Nivona CafeRomatica 855 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
