Gebruiksaanwijzing /service van het product TX-SR501E van de fabrikant Onkyo
Ga naar pagina of 48
E n AV Receiv er TX-SR501 TX-SR501E Instruction Manual Thank you for purchasing the Onkyo A V Recei ver . Please read this manual thoroughly before making con- nections and plugging in the unit. F ollo wing the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your ne w A V Recei ver .
2 Impor tant Safeguar ds 1. Read Instructions —All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions —The safety and operating instructions should be retained for future reference.
3 Important Safeguards— Contin ued 21. Replacement Parts —When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or ha ve the same characteristics as the orig- inal part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
4 Precautions— Continued 1. Recording Copyright —Unless it’ s for personal use only , recording copyrighted material is illeg al without the permission of the copyright holder . 2. AC Fuse —The AC fuse inside the TX-SR501/TX-SR501E is not user-serviceable.
5 Bef ore Using the TX-SR501/TX-SR501E The W orldwide model has a voltage selector for compatibil- ity with po wer systems around the world. Before you plug in this model, make sure that the v oltage selector is set to the correct voltage for your area.
6 Contr ols & Connectors Front P anel For detailed information, refer to the pages in parenthesis. A PO WER switch (24) The North American model doesn’ t have this switch. This is the main power switch. When set to OFF , the TX-SR501/TX-SR501E is completely shutdown.
7 Controls & Connector s —Continued G MEMOR Y button (30, 31) This button is used when storing and deleting radio presets. H FM MODE button (31) This button is used to select the FM radio Stereo and Mono modes. It’ s also used when deleting radio presets.
8 Controls & Connector s —Continued Rear P anel For detailed information, refer to the pages in parenthesis. A COMPONENT VIDEO (10, 12, 14, 16) These RCA/phono connectors can be used to connect a TV , D VD player , or other A V component with component video inputs and outputs.
9 Controls & Connector s —Continued RC-518M (North American model) RC-479S (other models) This page describes only those buttons that can be used to control the TX-SR501/TX-SR501E when the remote con- troller is in RCVR mode (Recei ver mode).
10 Connecting Y our A V Components • Read the manuals supplied with your A V components. • Don’ t connect the power cord until you’ ve completed all audio and video connections.
11 Connecting Y our A V Components —Contin ued The TX-SR501/TX-SR501E of fers sev eral connection for- mats for compatibility with a wide range of A V equipment. The format you choose will depend on the formats supported by your A V components. Use the follo wing sections as a guide.
12 Connecting Y our A V Components —Contin ued ■ Using Composite Video Use a composite video cable to connect the TX-SR501/ TX-SR501E’ s VIDEO MONITOR OUT to a composite video input on your TV , as shown.
13 Connecting Y our A V Components —Contin ued A udio Connections ■ Using Optical or Coaxial Connections • Use an optical digital audio cable to connect the TX-SR501/TX-SR501E’ s OPTICAL 1 DIGIT AL INPUT to the optical output on your D VD player , as sho wn.
14 Connecting Y our A V Components —Contin ued Video Connections • Use an S-V ideo cable to connect the TX-SR501/ TX-SR501E’ s S VIDEO VIDEO 2 IN to the S-V ideo out- put on your VCR, as shown.
15 Connecting Y our A V Components —Contin ued If your TV has A V outputs and you want to record from your TV to your VCR via the TX-SR501/TX-SR501E, make the follo wing connections.
16 Connecting Y our A V Components —Contin ued Video Connections ■ Using Composite Video Use a composite video cable to connect the TX-SR501/ TX-SR501E’ s VIDEO VIDEO 2 IN to the composite video output on your satellite/cable tuner , LD player , etc.
17 Connecting Y our A V Components —Contin ued ■ Using Coaxial or Optical Connections • Use a coaxial digital audio cable to connect the TX-SR501/ TX-SR501E’ s CO AXIAL DIGIT AL INPUT to the coaxial output on your CD player , as sho wn.
18 Connecting Y our A V Components —Contin ued ■ T urntable with an MC-type (Moving Coil) Cartridge Use an RCA/phono audio cable to connect the TX-SR501/ TX-SR501E’ s L/R T APE IN connectors to the audio outputs on your phono preamp. Use another RCA/phono audio cable to connect the phono preamp’ s inputs to your MC head amp’ s outputs.
19 Connecting -compatible A V Components W ith (Remote Interacti ve) you can control your - compatible Onkyo CD player , DVD player , or cassette recorder with the TX-SR501/TX-SR501E’ s remote contr.
20 Installing Y our Speaker s Y ou can use two sets of speakers with your TX-SR501/ TX-SR501E: speaker set A and speaker set B. W ith speak er set A , which should be installed in your main listening .
21 Installing Y our Speakers —Continued Before you connect your speakers, read the follo wing: • Disconnect the po wer cord from the wall outlet. • Read the instructions supplied with your speak ers. •P ay close attention to speak er wiring polarity .
22 Connecting Antenna This chapter explains ho w to connect the supplied indoor FM antenna and AM loop antenna, and how to connect commer - cially av ailable outdoor FM and AM antennas.
23 Connecting Antenna —Continued If you cannot achie ve good reception with the supplied indoor FM antenna, try a commercially av ailable outdoor FM antenna instead. Notes: • Outdoor FM antennas work best outside, but usable results can sometimes be obtained when installed in an attic or loft.
24 Po wering Up & Setting Up the TX-SR501/TX-SR501E This chapter explains basic settings that you need to mak e in order to enjoy your TX-SR501/TX-SR501E after turning it on for the very first time.
25 Po wering Up & Setting Up the TX-SR501/TX-SR501E —Continued If y ou’ve connected a MiniDisc r ecorder to the T APE inputs, you can set the TX-SR501/TX-SR501E so that “MD” appears on the display instead of “T APE. ” Simply press and hold the [T APE] button until “MD” appears (about two seconds).
26 Configuring Speaker Set A This chapter describes ho w to configure speaker set A to achie ve the best results from your surround sound system. There is no speaker configuration for speaker set B.
27 Configuring Speaker Set A —Continued W ith this function you can adjust the volume of each indi vid- ual speaker so that you can hear all speakers equally at the listening position. Note: Y ou cannot use this function while the TX-SR501/ TX-SR501E is muted (see page 33).
28 Pla ying Y our A V Components This chapter explains ho w you can play your A V components through the TX-SR501/TX-SR501E. See pages 10–19 for information on connecting your A V components to the TX-SR501/TX-SR501E.
29 Playing Y our A V Components —Continued While “ Auto” is displayed, the name of the digital input cur- rently assigned to the input source (page 24) is displayed in parenthesis. For e xample, “ Auto (CO AX). ” The possible inputs are OPT1, OPT2, and CO AX.
30 Using the T uner This chapter explains ho w to use the built-in tuner . Y ou can store your fav orite radio stations as presets for con- venient selection.
31 Using the T uner —Continued T uning into weak FM stations If the signal strength of the station you are trying to tune into is poor , you may not be able to tune into that station, or recep- tion may be noisy .
32 Common Functions This chapter explains functions that can be used with an y input source. Y ou can turn on and off speaker sets A and B individually . Note: When you turn on speaker set B, the listening mode for speaker set A is set to Stereo. W ith this function you can adjust the brightness of the dis- play .
33 Common Functions —Continued W ith this function you can temporarily mute the output of the TX-SR501/TX-SR501E. Muting is cancelled when the TX-SR501/TX-SR501E is set to Standby . W ith this function you can adjust the volume le vel of each indi vidual speaker as you like.
34 Using the Listening Modes W ith its built-in surround-sound decoders and DSP pro- grams, the TX-SR501/TX-SR501E can transform your home listening room into a movie theater or concert hall. To get the most from surround sound, it’ s important that you install and configure your speakers correctly .
35 Using the Listening Modes —Continued The listening modes are explained belo w . Basic Modes Direct: The selected input source is fed directly to the po wer- amp stages and through to the front left and right speakers with minimal processing.
36 Using the Listening Modes —Continued Y ou can select the listening modes by using the following b uttons: [DIRECT], [STEREO], [SURR OUND], [DSP], and [A.
37 A udio Adjust Functions These functions only work with speaker set A. Audio Adjust provides various functions for adjusting the sound, including se veral especially for use with Dolby Digi- tal, DTS, and Pro Logic II material. The follo wing table lists the Audio Adjust functions, their ranges and default v alues.
38 A udio Adjust Functions —Continued The Audio Adjust functions are explained belo w . ■ Bass W ith this function you can boost or cut lo w-frequency sounds output by the front speakers from –12 dB to +12 dB in 2 dB steps.
39 Recor ding This chapter explains ho w to record the selected input source to an A V component with recording capability , and how to record audio and video from two dif ferent sources. Y ou can record only to A V components that are connected to the T APE OUT or VIDEO 1 OUT connectors.
40 Using the Remote Contr oller RC-479S with Y our Other A V Components Connecting your -compatible Onkyo CD player , D VD player , or cassette recorder to the TX-SR501/TX-SR501E via allows you to control it with the TX-SR501/ TX-SR501E’ s remote controller .
41 Using the Remote Contr oller RC-518M with Y our Other A V Components Connecting your -compatible Onkyo CD player , D VD player , or cassette recorder to the TX-SR501 via allows you to control your system with the TX-SR501’ s remote con- troller by pointing it at the TX-SR501.
42 Using the Remote Controller RC-518M with Y our Other A V Components —Continued Using the RC-518M If you need to enter the manufacturer’ s code for your A V component into the remote controller , see page 41. 1 P oint the remote controller at the TX-SR501 and use the input selector buttons to select an input source f or the TX-SR501.
43 Using the Remote Controller RC-518M with Y our Other A V Components —Continued VCR mode TV mode Y ou must enter the appropriate manufacturer’ s code (see page 41).
44 Using the Remote Controller RC-518M with Y our Other A V Components —Continued Cable mode* Satellite mode* Y ou must enter the appropriate manufacturer’ s code (see page 41). Y ou must enter the appropriate manufacturer’ s code (see page 41).
45 Tr oubleshooting Symptom P ossible cause Remedy Amp Can ’t turn on the TX-SR501/TX-SR501E? The power c ord is not c onnected. Co nnect the power c ord to a suitable wall outlet (page 24). The [PO WER] switch is set to OFF (TX-SR501E only). Set the [PO WER] switch to ON (page 24).
46 Tr oubleshooting —Continued Symptom P ossible cause Remedy Amp A low-frequency noise or h um can be heard? The audio connecting cables at the r ear of the TX-SR501/TX-SR501E are too close t o the powe r cord. U ntangle the audio cables and position them as far aw ay as possible fr om the power cor d.
47 Tr oubleshooting —Continued Symptom P ossible cause Remedy T uner Rec ept io n is noisy , inter - mittent, and the FM STE- REO indicator flashes? Yo u’ re t oo far away fr om the transmitter . Or , y our FM antenna is in the wrong position or pointing in the wrong direction.
http://www.onky o.co.jp/ HOMEP A GE SN 29343474 I0303-1 Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8111 Fax: 072-831-8124 ONKYO U.S.A. CORPORATION 18 Park Way, Upper Saddle River, N.J. 07458, U.
Een belangrijk punt na aankoop van elk apparaat Onkyo TX-SR501E (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Onkyo TX-SR501E heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Onkyo TX-SR501E vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Onkyo TX-SR501E leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Onkyo TX-SR501E krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Onkyo TX-SR501E bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Onkyo TX-SR501E kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Onkyo TX-SR501E . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
