Gebruiksaanwijzing /service van het product BAR888 van de fabrikant Oregon Scientific
Ga naar pagina of 14
1 GB WEATHER FORECAST MULTI-CHANNEL IN-OUT THERMOMETER WITH CABLE FREE SENSOR AND RADIO CONTROLLED CLOCK MODEL: BAR888 USER’S MANUAL INTRODUCTION Congratulations on your purchase of the BAR888 Weather Fore- cast Multi-Channel In-Out Thermometer with 433MHz cable free sensor and radio-controlled calendar clock.
2 GB FIVE-LINE DISPLAY Facilitates easy reading of weather forecast, remote and indoors temperatures and calendar clock CHANNEL BUTTON Selects among different channels MEMORY BUTTON Recalls the maximu.
3 GB LCD Displays the current temperature monitored by the remote unit LED INDICATOR Flashes when the remote unit transmits a reading °C/°F SLIDE SWITCH Selects between Centigrade (°C) and Fahrenhe.
4 GB 4. Insert the batteries strictly according to the polarities shown therein. 5. Replace the battery compartment door and secure its screws. 6. Using a blunt styles such as a paper clip, press RESET. Note: To avoid malfunction, alway press reset after battery replacement.
5 GB 3. Replace the battery compartment door. Replace the batteries when the low-battery indicator of the indoors temperature lights up. (Repeat the steps described in section “BEFORE YOU BEGIN”) LOW BATTERY WARNING When it is time to replace batteries, the respective low-battery indicator will show up when the respective channel is selected.
6 GB THE RESET BUTTON This button is only used when the unit is operating in an unfavorable way or malfunctioning. Use a blunt stylus to hold down the button. All settings will return to their default values. GETTING STARTED Once batteries are in place for the remote units, they will start transmitting temperature readings at 30-second intervals.
7 GB HOW TO READ THE KINETIC WAVE DISPLAY The kinetic wave display shows the signal receiving status of the main unit. There are three possible forms: The unit is in searching mode.
8 GB WEATHER FORECAST FUNCTION Your BAR888 detects barometric pressure changes and the LCD displays the illustrated weather symbols which indicates the weather forecast for 12 to 24 hours ahead, for an area with a radius of about 30-50 km. Important: 1.
9 GB When the reception is complete, the radio reception signal will stop blinking. The strength of the reception for the last full hour will be indicated. For better reception, place the clock away from metal objects and electrical appliances to minimize interference.
10 GB HOW TO SET THE CLOCK MANUALLY To set the clock manually, hold MODE/SET for three seconds. The display will return to MODE 1, with the hour digits blinking. Use ( ) or ( ) to select the hour. Press and hold to increase or decrease the value rapidly.
11 GB TIME ZONE AND OFFSET TABLE SPECIFICATIONS Temperature Measurement Main unit Indoor Temperature measurement Displayed IN temperature range : -9.9°C to +70.0°C (14.2°F to 158.0°F) Proposed operating range : -5.0°C to +50.0°C (23.0°F to 122.
12 GB Remote Temperature measurement Displayed OUT temperature range : -50.0°C to +70.0°C (-58.0°F to 158.0°F) Proposed operating range : -5.0°C to +50.0°C (23.0°F to 122.0°F) Temperature resolution : 0.1°C (0.2°F) Remote unit Displayed range : -50.
13 GB instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
14 GB MODEL: BAR888 WEA THER FORECAST MUL TI-CHANNEL IN-OUT THERMOMETER WITH CABLE FREE SENSOR AND RADIO CONTR OLLED CLOCK Instruction Manual **** Mode D'emploi **** Bedienungsanleitung **** Manu.
Een belangrijk punt na aankoop van elk apparaat Oregon Scientific BAR888 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Oregon Scientific BAR888 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Oregon Scientific BAR888 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Oregon Scientific BAR888 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Oregon Scientific BAR888 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Oregon Scientific BAR888 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Oregon Scientific BAR888 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Oregon Scientific BAR888 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.