Gebruiksaanwijzing /service van het product WJ-MPU955A van de fabrikant Panasonic
Ga naar pagina of 87
Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. No model number suffix is shown in this manual. C e ntra l P rocessin g U n it W J-M P U 955A FAN ALARM HDD ACTIVE OPERATE Central Processing Unit Operating Instructions Model No.
2 The serial number of this product may be found on the sur- face of the unit. You should note the serial number of this unit in the space provided and retain this book as a permanent record of your purchase to aid identification in the event of theft.
3 NOTE: This equipment has been tested and found to com- ply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pro- vide reasonable protection against harmful interference when the equipment is operated in a commercial environ- ment.
4 Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
5 • Microsoft, Windows, and Internet Explorer are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. • Other names of companies and products contained in these operating instructions may be trademarks or registered trade- marks of their respective owners.
6 CONTENTS Important Safety Instructions ........................................... 4 Limitation of Liability ........................................................ 5 Disclaimer of Warranty .................................................... 5 Trademarks and Registered Trademarks.
7 ■ Alarm Arming Control ............................................. 64 ■ To Operate Alarm-related Camera (ACK) .............. 65 ■ To Cancel Alarms ................................................... 65 ■ Alarm History Table ...............
8 Features Preface • Central Processing Unit WJ-MPU955A is the main component of WJ-SX650 512 x 64 Full Matrix System and GX System that are network-based. • This document describes how to operate Central Processing Unit WJ-MPU955A from the Panasonic Ethernet controllers.
9 Precautions • Refer all work related to the installation of this appliance to qualified service personnel or system installers. • Do not block the ventilation opening or slots on the cover. To prevent the appliance from overheating, place it at least 5 cm {2 inches} away from the wall.
10 This document uses the following convention when describing the use and operation of this unit. System Controller: Panasonic System Controller WV-CU950 CPU: Panasonic Central Processing Unit WJ-MPU.
11 System type This document will provide the product information about WJ-SX650 512 x 64 Full Matrix System and GX System. • Admin Console User's Guide • MPEG2 Encoder WJ-GXE900/MPEG2 Decode.
12 This page intentionally left blank..
13 FEA TURES OF WJ-SX650 512 x 64 FULL MA TRIX SYSTEM AND GX SYSTEM.
14 Main Features ■ Operator Functions ● Operator Area Changes The system can be divided into multiple areas (up to 64), and an operator can change from one area to another if they have the necessary permission. ● Operator Log On and Off Operators are assigned a user ID and password by a sys- tem administrator.
15 ■ T our Sequences ● Program the T our Sequences This function allows administrators to program tour sequences, and store them in the system database.
16 ■ Standard System Standard System contains one CPU. It can handle up to 256 encoder devices, up to 64 decoder devices, one administration station, and up to 64 system controllers. The IP addresses in the following diagram are the default addresses of the CPU net- work ports.
17 ■ Redundant System Redundant System requires two CPUs. It can also handle up to 256 encoder devices, up to 64 decoder devices, one adminis- tration station, and up to 64 system controllers.
18 Ethernet Controllers • WJ-MPU955A supports Panasonic Ethernet controllers. • Up to 64 system controllers are connectable in the system. • IP addresses will be automatically provided to each system controller during the communication with the CPU.
19 This system contains one CPU. The CPU can handle up to four SX650 sub nodes and two SX650 bridge nodes, one admin console and up to 64 system controllers. Each sub node should equip one Network Board WJ-PB65E01 to communicate with the CPU through the Ethernet wiring.
20 This page intentionally left blank..
21 21 21 DET AILED PRODUCT DESCRIPTION.
22 10BASE-T/100BASE-TX SERIAL 21 OTHER SYSTEM DEVICE SYSTEM CONTROLLER POWER ON AC IN OFF SIGNAL GND !2 !1 !3 !4 !5 Major Operating Controls and Their Functions ■ Layout The following diagrams are the front panel and the rear panel of the WJ-MPU955A.
23 ■ Panel Details q Operation Indicator (OPERATE) The operation indicator is on when the power of the WJ-MPU955A is turned on and the OPERATE switch is pressed. The operation switch of the CPU is located behind the front panel. w Screws These screw are removed to detach the front panel.
24 This page intentionally left blank..
25 INST ALLA TIONS.
26 W ARNING The installations described in the diagram should be made by qualified service personnel or system installers . ■ Mounting into the Rack The CPU (WJ-MPU955A) should be mounted into the rack as shown in the following diagram. Here are the steps: 1.
27 CONNECTION OF GX SYSTEM (NTSC MODEL ONL Y).
28 Connection with System Devices In addition to the WJ-MPU955A, other system devices are required in order to form the GX System. ■ System Controllers A system controller is an operator console, and it provides a user interface for operators to interact with the GX System.
29 3. Turn both CPUs on. 4. By using the admin console, click the "Get CPU Status" button. When the admin console asks to set default sta- tus, click "Yes" When switching the CPU to Active/Standby By using the admin console, click the "Switch Active CPU" button on the "CPU" screen.
30 ■ Digital V ideo Encoder Devices Digital video encoder devices refer to MPEG2 video encoder devices (WJ-GXE900). They connect to the CPU through an Ethernet switching hub in an IP based network. Refer to the Operating Instructions of MPEG2 encoder/MPEG2 decoder.
31 ● Setup Encoder Itself In order to communicate with the CPU, the encoder device must also be configured. You can access the encoder device through its Web interface using Microsoft Internet Explorer. Following is an example of the system layout and information to be filled into the table.
32 Decoder # ■ Digital V ideo Decoder Devices Digital video decoder devices refer to MPEG2 video decoder devices (WJ-GXD900). They connect to the CPU through an Ethernet switching hub in an IP based network. Refer to the Operating Instructions of MPEG2 encoder/MPEG2 decoder.
33 ■ Admin Console Admin Console is a system database management software. The software operates in the Microsoft ® Windows ® environment. Refer to the Admin Console User's Guide for details. To connect a personal computer (PC) with the CPU, perform the following.
34 ■ Digital Disk Recorders Digital Disk Recorder is the combination of hard disk recorder (a recording device using a hard disk drive to record camera pictures) and video multiplexer. Refer to the Operating Instructions of digital disk recorder for details.
35 CONNECTION OF WJ-SX650 512 x 64 FULL MA TRIX SYSTEM.
36 Connection with System Devices ■ System Controllers Regarding system controllers, the connection and setup are same as the GX system. (Refer to p. 28 .) ■ Matrix Switcher WJ-SX650 Series ● Network Board Installation The back panel (OUT X-1) of Video Output Board 1 should be replaced by Network Board WJ-PB65E01.
● V ertical Interval Synchronization Connect the coaxial cables as shown below. Set DIP SW4005 Bit4 to ON for each Video Output Board 1. 37 ID 1 2 3 4 5 6 I/F 0 0 0 0 0 0 IPA 192.168.200.1 192.168.200.2 192.168.200.3 192.168.200.4 192.168.200.5 192.
38 SubNode 5 SubNode 4 SubNode 2 38 ● Connect with Each SX650 SubNode via Coaxial Cables *1-1 Video Connection between SubNode 1 and SubNode 3 (Bridge) SubNode 1 SubNode 3 Monitor Output Connectors .
39 39 *2-1 Loop-thru Connection between SubNode 1 and SubNode 4 SubNode 1 SubNode 4 VIDEO OUT 1 (Input Board (1)) Camera Input Connecters 1 to 8 (Input Board (1)) VIDEO OUT 2 (Input Board (1)) Camera .
40 *2-2 Loop-thru Connection between SubNode 2 and SubNode 5 SubNode 2 SubNode 5 VIDEO OUT 1 (Input Board (1)) Camera Input Connecters 1 to 8 (Input Board (1)) VIDEO OUT 2 (Input Board (1)) Camera Inp.
41 CONFIGURA TION DET AILS.
42 Notes: • Normally, maintain the default configuration. • When modifying the configuration, refer to experienced system administrators. ■ Configuration File Modification The system configuration file is referred to as the SYS.
43 Text appearing in blue is explanatory, and not part of the sys.ini file. Interface section The CPU can incorporate up to three Ethernet network interface cards. [INTERFACES] ***{ Number of interfaces in the system} Numinterfaces=3 The number used here is the number of the Ethernet ports on MPU955A CPU.
44 Procs section This section tells the system which interface is to be used by certain process files. [PROCS] ***{ Process Interface Assignments } ***{ Format: <Process Name>=<interface_num&.
45 TimeDateFormat=1 ***{ Time-Hour Display format } ***{ Format: TimeHourFormat=<format> } ***{ format 0 - 12 Hour } ***{ format 1 - 24 Hour } TimeHourFormat=0 UNIT section Note: This section should not be changed. [UNIT] ***{ The unit ID should be the same as the one defined in } ***{ the Global Admin database for this unit.
46 ALARMTEXTDISPLA Y section This section sets up the characteristics of the alarm text - whether alarm text only or alarm and action text. There is a 38 character maximum for alarm text. [ALARMTEXTDISPLAY] ***{ This section is optional. It is not required unless } ***{ System defaults are not acceptable.
47 SNTP section Note: This section should not be changed. This section allows changes to Simple Network Time Protocol parameters, if SNTP is implemented. [SNTP] ***{ This section is optional. It is not required unless } ***{ System defaults are not acceptable.
ID 48 Control Video OSD This section indicates the default contents of sample650.adm (sample database for WJ-SX650 512x64 F ull M atrix S ystem) that is included on the CD-ROM. SX650 SUBNODES Default Database Contents (WJ-SX650 512 x 64 Full Matrix System) 1 2 3 4 5 6 I/F 0 0 0 0 0 0 IPA 192.
Timeout 49 ID MONITORS 1 2 3 4 5 : : 63 64 Area 0 0 0 0 0 : : 0 0 Local 1 2 3 4 5 : : 63 64 Switch SX650 SX650 SX650 SX650 SX650 : : SX650 SX650 Port 1 2 3 4 5 : : 63 64 ID 100 955 Password 100 955 Pr.
ID Switch 50 ID This section indicates the contents of sample.adm (sample database for GX system) that is included on the CD-ROM. GX DEVICES Database Contents (GX System) (NTSC Model Only) 1 2 3 4 5 6 I/F 0 0 0 0 0 0 IPA 192.168.1.1 192.168.1.2 192.168.
51 ID 1 Area 0 Priority 3 Boot File – Model WV-CU950 IPA 172.18.0.200 EA 00:80:45:0D:D0:01 Port 0 ID CONTROLLERS Note: Actual MAC address that is indicated on a product should be entered in the EA field.
52 DIGITAL RECORDERS 1 15 16 14 13 10 9 7 12 11 6 1 2 3 4 5 8 ID Logical 1 Model WJ-HD316A Video Switch Port GX 16 IPA 172.18.0.60 Unit Address 1 Digital Bitrate 6.
53 OPERA TING PROCEDURES (with WV -CU950).
54 LCD Display Descriptions ■ Default Status (LCD Display After Login) q Monitor number The number of connected monitor is displayed. w Unit number/Status The number of connected site will be displayed. e Camera number The number of selected camera is displayed.
55 ■ Operation Start (Login) 1. Turn on the power switches of all system components. 2. Turn on the power of system controller. (Refer to the Operating Instructions.) The OPERATE indicator will light up, and the following message will appear on the LCD.
56 After the login procedure, the following operations are avail- able to control the system. The operation begins with monitor selection. Then, the image of selected camera appears on the active monitor. ■ Monitor Selection 1. Select the desired monitor number by pressing the numeric buttons.
57 ■ Adjustment of LCD Display and Buzzer You can perform the settings of LCD brightness, LCD contrast, alarm buzzer, or button buzzer. (Refer to WV-CU950 Operating Instructions for how to adjust.
58 Camera Site Accessories Control ■ Lens Control Notes: • Check that a specified lens, with motorized zoom/focus functions, is mounted on the camera, and the lens selection (DC/VIDEO) on the camera is set to DC. • Available functions differ depending on cameras.
59 4. Press the PRESET/PGM PRESET button while holding down the SHIFT button. The preset position will be saved. Note: If the entered position number has stored the previ- ous preset position, it will be overwritten by the new one. ● Call Preset Position 1.
60 ■ Defroster Control The following procedure is available when a selected cam- era (housing) is equipped with a defroster. 1. Select the desired monitor and camera. (Refer to p. 56 Monitor Selection and Camera Selection.) 2. Pressing the DEF ON/OFF button.
61 ■ Camera Function (Shortcut Function) The following function is available only when specified cam- eras with the camera function feature are used. This function enables executing camera functions via a shortcut. 1. Select the desired monitor and camera.
62 Running Sequence ■ T our Sequence The following functions are available if a Tour Sequence has been previously configured through the admin console. Any Tour Sequence can be assigned to any monitors. 1. Select the desired monitor. (Refer to p. 56 Monitor Selection.
63 Note: You can also return to spot monitoring by select- ing a camera. Notes: • Group sequences should contain group presets with the same group of monitors. • If two or more group sequences are assigned to the same monitor, only one group sequence can run at a time.
64 Alarm Control ■ Alarm Selection To control alarm behaviors, you need to select a desired alarm number. 1. Select a desired alarm number by pressing the numer- ic buttons. 2. Press the ALARM/ALM SUSPEND button. The current status of selected alarm will be displayed on the LCD.
65 To arm or disarm all alarms Every time you press the ALARM/ALM SUSPEND but- ton while holding down the SHIFT button, all alarms will be armed or disarmed. Note: To arm or disarm an alarm, activate Allow Disarm for the alarm. (Refer to the Admin Console User's Guide for details.
66 ■ Alarm History T able There are 1000 alarm records stored in chronological order in 125 pages of table. 1. Select a desired monitor. (Refer to p. 56 Monitor Selection.) 2. Press the ALM RECALL button. "AlarmHist" will appear on the LCD, and the ALARM HISTORY table will be dis- played on the active monitor.
67 WJ-HD300A Series Control Central Processing Unit WJ-MPU955A can control Digital Disk Recorder WJ-HD300A Series. ■ Recorder Selection To control this recorder, you need to perform the operations described in Recorder Selection. You can select a recorder by performing either of the fol- lowing.
68 • To display the spot playback picture, press the numer- ic button corresponding to the desired channel num- ber, then press the ENTER button. Then, the active camera number will appear on the LCD. • To select the next channel number, press the + button.
69 ● Manual Recording 1. Select the recorder. (Refer to p. 67 Recorder Selection.) 2. Press the REC button. Recording will start. 3. To stop the recording, hold down the REC button for 2 seconds. Note: Refer to the Operating Instructions of recorder for details and other recording modes.
70 Available buttons and functions (Text information) <Main unit> CAM (SET), MON (ESC), or EXIT button: Returns to the upper menu. Note: Text editing is not available. Available buttons and functions (DATA COPY window) <Main unit> JogDial clockwise: Increments a parameter.
71 7. Select a desired recording event by performing one of the following. • Move the 3D joystick controller to up or down. • Rotate the JogDial clockwise or counterclockwise. • Press the + or – button. Note: To move to the next or previous page, perform either of the following.
72 ● VMD search Recording events will be searched by the date and time when a camera detected the brightness-level change. Then, a result list or a thumbnail will be displayed. For playback, you will select a time and date displayed on the result list or thumbnail.
73 Note: To delete the motion detection area, select "DELETE AREA" on the status bar by rotating the JogDial or pressing the +/ – button. Then, move the "+" mark to the desired area with the joystick, and press the CAM (SET) button.
74 Note: To move to the next or previous page, perform either of the following. • Move the zoom wheel controller to the right or left. • Rotate the shuttle ring clockwise or counterclock- wise. 4. Press the PLAY button. The playback of selected recording event will start.
75 ■ System Function 1. Select the recorder. (Refer to p. 67 Recorder Selection.) 2. Enter the desired function number. 3. Press the CAM FUNC/SYS FUNC button while holding down the SHIFT button.
76 ● Disk Selection You will specify a disk of recorder for search playback. 1. Select the recorder. (Refer to p. 67 Recorder Selection.) 2. Press the MENU button repeatedly repeatedly until "HD300 DiskSelect" appears on the LCD. 3. Press one of the F1 to F4 buttons.
77 Menu Function Descriptions ■ Menu Functions ■ T o Recall Menu Functions 1. Press the MENU button. "CamMenu" menu will appear on the LCD.
78 Menu Function Details ■ Camera Setup Notes: • The following function requires the use of cameras sup- porting this function. • The details on the setup menu differ depending on camera models. Refer to WV-CU950/650 Operating Instructions and the Operating Instructions of camera for available controls on the camera setup menu.
79 ■ Patrol Learn 1. Select a desired monitor and camera. (Refer to p. 56 Monitor Selection and Camera Selection.) 2. Display "Patrol" menu. (Refer to Step 1 and 2 of p. 77 To Recall Menu Functions.) 3. Press the F1 (Start) button. The patrol learn setup will start.
80 ■ Alarm Status T able The table shows the alarm statuses. 1. Select a desired monitor. (Refer to p. 56 Monitor Selection.) 2. Display "AlmStat" menu. (Refer to Step 1 and 2 of p. 77 To Recall Menu Functions.) 3. Select a desired function by pressing one of the F1 to F3 buttons.
81 ■ System Status T able The table shows the system status in real time. 1. Select a desired monitor. (Refer to p. 56 Monitor Selection.) 2. Display "SysStat" menu. (Refer to Step 1 and 2 of p. 77 To Recall Menu Functions.) 3. Select a desired function by pressing one of the F1 to F3 buttons.
82 4. To display the next page, press the + button. To display the previous page, press the – button. Notes: • To display the first page of table, press the + but- ton while holding down the SHIFT button. • To display the last page of table, press the – button while holding down the SHIFT button.
83 APPENDIX.
84 The power cord insulation is damaged. T roubleshooting Before asking for technical support, please check the following symptoms and their possible causes and solutions. If the solu- tions below do not solve the problem, or the symptom is not listed below, contact your installer or sales representative.
85 System Controller-Related Problems WV-CU950 controller fails to start. LCD shows: "Connecting to Main CPU … " Symptom Possible cause / Possible solution Reference Admin Console User's Guide Check the network connection between the CPU and CU950 controller.
86 Specifications Power Supply NTSC model: 120 V AC, 60 Hz PAL model: 220 V - 240 V AC, 50 Hz Power Consumption: 60 W Controllable Encoders (NTSC model only): 256 Encoders Controllable Decoders (NTSC .
For U.S., Canadian and Puerto Rican fields: Panasonic System Solutions Company, Unit Company of Panasonic Corporation of North America Security Systems www.
Een belangrijk punt na aankoop van elk apparaat Panasonic WJ-MPU955A (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Panasonic WJ-MPU955A heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Panasonic WJ-MPU955A vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Panasonic WJ-MPU955A leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Panasonic WJ-MPU955A krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Panasonic WJ-MPU955A bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Panasonic WJ-MPU955A kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Panasonic WJ-MPU955A . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
