Gebruiksaanwijzing /service van het product WJ-RT208 van de fabrikant Panasonic
Ga naar pagina of 62
Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. Digital Disk Recorder Operating Instructions Model No.
WARNING: • This apparatus must be earthed. • Apparatus shall be connected to a mains socket outlet with a protective earthing connection. • The mains plug or an appliance coupler shall remain readily operable. • To prevent fire or electric shock hazard, do not expose this apparatus to rain or moisture.
3 IMPORT ANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings.
4 Limitation of Liability THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WAR- RANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WAR- RANTIES OF MERCHANTABILITY, FITNESS FOR ANY PAR- TICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD PARTY'S RIGHT.
5 Precautions • Refer all work related to the installation of this appliance to qualified service personnel or system installers. • Prevent condensation from forming on the surface of the hard disk.
6 CONTENTS Important Safety Instructions ................................................................................................. ..................... 3 Limitation of Liability ................................................................
7 Preface Features The Digital Disk Recorder WJ-RT208 is a professional security product with eight video and audio inputs. It is capable of recording high-quality video/audio data over an extended period of time.
8 Major Operating Controls & Their Functions ■ Front V iew ERROR ALARM HDD TIMER OPERA TE 12345 678 90 MENU ESC ALARM RESET SEQUENCE STILL PA U S E R E V F W D S K I P STOP PLA Y REC COPY 2 SET .
9 ↓ : Down button • Menu: The cursor moves downwards on the menu or dia- log. •C amera control: Controls the downward movement of the camera. Images will be zoomed out. ← : Left button • Menu: Moves the cursor to the left or changes option parameters.
10 ■ Rear V iew q Power Cooling Fan Prevents the temperature of the recorder from rising. Do not block the ventilation openings. w AC Power Connector (AC IN) Connect the supplied power cable to this AC power connector. e Power Switch (POWER) This switch turns the power of the disk recorder on and off.
11 Installation This installation should be made by qualified service personnel or system installers. ● Cautions Places to avoid • Direct exposure to sunlight or near a source of heat such as a radiator. • Very dirty and dusty places. Places subject to strong vibrations.
12 4. Ready the hard disk and install wire jumpers. To connect two hard disks to one IDE interface, make sure to designate one as the Master HDD and the other the Slave HDD. If only one hard disk is connected, make this the Master HDD. (For connection of the Master and Slave HDD, refer to the operating instructions of the hard disk.
13 7. Connect the flat hard disk data cable and power cord (Fig. 7). Seen from the front of the recorder, the IDE interface is numbered 0, 1, 2, 3 from left to right. Connect the four power sup- ply ports and four IDE data ports on the motherboard with the correspondingly numbered hard disk connectors.
The WJ-RT208 is used to connect cameras, microphones, monitors, VGA monitors, PCs, networks, cameras, external HDDs, and more. (According to the interface type, some devices cannot be connected.) In regard to two types of system configurations and connections, a brief explanation is given below.
15 ● Connection with RS485 Camera Cautions: q Camera cable length (RS485) is a maximum of 1 200 m. w Only the 4-pin RS485 signal cable can be used. RS485 Camera TERMINAL IN RS485 ALARM OUT WJ-RT208 .
16 ● Connection with External HDD (For Data Backup) <Network System> ■ Example for Network System Connection ● Direct PC Connection ERROR ALARM HDD TIMER OPERATE 1 2 3 4 5 6 7 8 90 MENU ES.
17 ● Connections with any Existing Network System ● Connections with a Broadband W AN Network Caution: The number of clients that can be connected to each WJ-RT208 is defined in the next table. According to differences in the network communication protocol, the number of clients that can be connected can differ.
• Connection with PS·Data systems This is an example of connection when the unit is used together with the PS·Data devices. If a connected system controller is PS·Data compatible, it is possible to operate this unit or connected devices using the sys- tem controller.
19 When controlling cameras with coaxial and PS·Data communication systems ■ When using WJ-SX150 MODE D ATA 10/100BASE-T COPY1 SERIAL MONITOR(VGA) TERMINAL/CONTROL AUDIO OUT VIDEO OUT AC IN SIGNAL .
The requirements of the alarm signal level are as follows: Low level: 0 V to 0.8 V High level: more than 3.3 V (max. 12 V) Pulse width: 2 s or more 3 s or less q Relay output: max.
21 ■ DIP Switch Setting When this unit is connected to any other system unit, it is necessary to set up the 2-bit DIP termination switches located on the back of this unit. DIP termination switches: The dip switch positions are defined by the attribute of the unit connected to the system’s DATA terminal.
22 Setup Procedures 1. Preparation 1.1 T urning the Power On (1) Connect the AC power cord to the AC power connector on the rear panel. (2) Turn on the power switch on the rear panel. A hard disk detection screen appears on the monitor for a few seconds.
23 1.3 Basic Operation of the Menu Understand the free type structure of the menu before you open this menu. B C D E G H F I q w q w WJ-RT208 SETUP MENU SYSTEM MANAGEMENT SEARCH REC&EVENT SETUP PT.
Menu type 1. Main menu Direction button (up or down): Used to move the cursor up or down. [SET] button: Used to move the cursor to the next submenu or the setup dialog box. [ESC] button: Used to close the setup menu, and returns the screen to the live monitoring images.
25 Note: If time is corrected in the middle of recording, part of the recorded data may fail to be played. This is because some turbulence can arise in the record start time and the end time. 1.5 T urning the Power Off The power supply for this unit cannot be turned off if hard disk data are being played or data are being recorded on the hard disk.
26 2. Operation 2.1 Screen Operation 2.1.1 Spot display If you want to display only one screen of a specified chan- nel, press the channel number. Images from the selected camera channel will be displayed with a spot display.
27 The playback is stopped, and live monitoring images are displayed on the channel 1 screen. The playback icon also disappears. Note: If you keep pressing the [STOP] button for 2 sec- onds or more when you want to stop playback of channel 1, recording of channel 1 is also stopped.
3. Even though an alarm occurs, no automatic recording is carried out unless "Period1" or "Period2" of "TERMI- NAL REC" and "VMD REC" has been set at "On". 4. Information about external alarms is directly sent to the PC through the network.
29 (3) Move the cursor to "PTZ SELECT" and press the [SET] button. Move the cursor to the desired channel by using the direction buttons (up/down). Select the channel by using the direction buttons (right/left). In the above figure, "Cam1" is selected in the "PTZ SELECT" menu.
30 2.5.3 Zoom (1) Select the zoom/focus mode by pressing the [SET] but- ton twice. The zoom/focus icon is displayed on the screen of the selected channel. (2) Press the direction button (up or down) to control the camera’s zoom. (3) Press the [SET] button twice.
31 (4) After completing the settings, press the [MENU] button again to close the camera setup menu. Caution: When displaying the Special Menu, move the cursor to "SPECIAL" on the camera setup menu and press the camera selection button [2].
32 3. Setup Setup Menu List Setting Item "SYSTEM MANAGEMENT" "SYSTEM SETUP" "DISK INFORMATION" "REBOOT SYSTEM" "PICTURE ADJUST" "TIME & DATE&.
33 3.1 Operation for V arious Settings 3.1.1 System Management (SYSTEM MAN- AGEMENT) (1) Press the [MENU] button. "WJ-RT208 SETUP MENU" appears. (2) Move the cursor to "SYSTEM MANAGEMENT" and press the [SET] button. (3) Move the cursor to "SYSTEM SETUP" and press the [SET] button.
Descriptions and remarks Selectable parameters [Default Setting] Item "Full, 1/2F, 1/4F, 1/8F, 1/16F" "Full" Note: When "Terminal Input" is set at "N.C.", an alarm unit of "N.O." should be connected to the alarm port of this unit.
35 Disk information (DISK INFORMATION) In regard to hard disc initialization and hard disc index recovery, refer to 3.4 herein. Reboot system (REBOOT SYSTEM) (1) Press the [MENU] button. "WJ-RT208 SETUP MENU" appears. Move the cursor to "SYSTEM MANAGEMENT" and press the [SET] button.
36 Stream type: "CBR" or "VBR" Default: "CBR" (If screen changes seem extreme, the setting made at "VBR" is preferable.
37 Video motion detector recording (VMD REC) (1) Press the [MENU] button. "WJ-RT208 SETUP MENU" appears. Move the cursor to "REC&EVENT SETUP" and press the [SET] button. (Refer to steps (1) and (2) in 3.1.3.) (2) Move the cursor to "VMD REC" and press the [SET] but- ton.
38 2. While "NetBackup" (data backup function) is being per- formed using the provided software, VMD response may be delayed. Record length (RECORD LENGTH) (1) Press the [MENU] button. "WJ-RT208 SETUP MENU" appears. Move the cursor to "REC & EVENT SETUP" and press the [SET] button.
39 (2) Move the cursor to "AUDIO SELECT" and press the [SET] button. (3) Use the direction button (up/down) and move the cur- sor to the setting channel.
40 Channel Name: Indicates the correlation between the camera title and serial number. Channel name can be changed using the provided software. Cautions: For the [All] operation and functions, refer to the timer recording explanation. Notes: 1. "CH Enable" of channel 1 cannot be set at "Off".
41 RS485 setup (RS485 SETUP) Refer to the step (7) in 2.5. Data port setup (DATA PORT SETUP) The settings relating to the serial data communication can be configured on "DATA PORT SETUP" of "COMMUNICA- TION SETUP" on the "WJ-RT208 SETUP MENU".
42 (3) Move the cursor to "SYSTEM LOG" and press the [SET] button. The result of queries into the system diary is displayed. Note: When the same operations are performed for three times or more, only the latest and the oldest system logs will be displayed.
43 "[R] System Updated" "Disk Full" "User Allow Overwrite" "Full Records" "Disk Access Error" "Thermal Error" "Fan Error" Event log (EVENT LOG) (1) Select "REPORT" from "WJ-RT208 SETUP MENU".
44 Online user information (ONLINE USER INFORMA- TION) (1) Move the cursor to "ONLINE USER INFORMATION" on the "USER INFORMATION" menu, and press the [SET] button. (2) Move the cursor to [Prev] or [Next] in order to browse the on-line user list.
45 3.2 Search and Playback (1) Press the [MENU] button. "WJ-RT208 SETUP MENU" is displayed. (2) Move the cursor to "SEARCH" and press the [SET] but- ton. The "SEARCH" dialogbox will be displayed. (3) Move the cursor to "Channel No.
46 Move the cursor to [Prev] or [Next] and press the [SET] button in order to browse data. Move the cursor to [Return] and press the [SET] button. The screen returns to "SEARCH". Caution: All record data from the starting time till the ending time are displayed.
47 3.4 Disk Management It is possible to initialize the hard disk and recover the hard disk index with "SYSTEM MANAGEMENT" – "DISK INFOR- MATION". 3.4.1 HDD formatting Stop all recording operations and disconnect all the net- works.
48 3.4.2 Recovery of hard disk index Move the cursor to the hard disk of the recovering index and press the [REC] button. Recovery of the hard disk index is then started.
49 System Screen Explanations All the system screens are shown below. Ordinary screen (9-split screen) Screen in a certain channel Note: During playback, an icon is displayed and "PLAYBACK" is displayed at the bottom left of the screen.
50 Setting item Setup Menu Parameters and Initial Setup V alues 1. System Management (SYSTEM MANAGEMENT) 1.1 System Setup (SYSTEM SETUP) 1.2 Disk Information (DISK INFORMA TION) 1.3 Reboot System (REBOOT SYSTEM) 1.4 CH1 Picture Adjustment (PICTURE ADJUST) Note: The parameters for this unit can be defined for each channel.
51 Setting item Setting item Setting item 2. Recording Search (SEARCH) 3. Recording & Event Setup (REC & EVENT) 3.1 Timer Recording (TIMER REC) Note: The parameters for this unit can be defined for each channel. 3.2 T erminal Recording (TERMINAL REC) Note: The parameters for this unit can be defined for each channel.
52 Setting item Setting item 3.3 VMD Setup (VMD REC) Notes: • The parameters for this unit can be defined for each channel. • The underlined parameters will not be copied when the channel copy is performed. * At the default, no area is selected. Up to 140 (14 x 10) areas are available.
53 Setting item Available values Available values Available values "Alarm Port" "Alarm Enable" "Line Speed" 5. Camera Setup (CAMERA SETUP) Note: The parameters for this unit can be defined for each channel. 6. Communication Setup (COMMUNICA TION SETUP) 6.
54 7. Report (REPORT) 7.1 System Log (SYSTEM LOG) Note: n: On-line user number m: HDD position number 7.2 Event Log (EVENT LOG) Note: n: Channel No. (1 - 8) 7.
55 Setting item Setting item 8. User Information (USER INFORMA TION) 8.1 User Level Setup (USER LEVEL SETUP) Note: The parameters for this unit can be defined for each channel. 8.2 Online User Information (ONLINE USER INFORMA TION) 8.3 Password (P ASSWORD) 8.
56 Operation using the system controller The following are descriptions of how to operate the unit using the system controller WV-CU650. To operate the unit using the system controller WV-CU650, configure the settings required to use a PS·Data compatible system controller in advance.
57 Operation WJ-RT208 WV-CU650 Note Pause playback Skip to the next frame PA USE PLA Y/P AUSE Available only during playback Available only during pause PLA Y Skip to the next/previous record SKIP Ava.
– These may be occurred due to the performance of this unit. However, this is not an error. 58 Confirm whether the power plug is inserted in an AC wall outlet. Tr oubleshooting Prior to repairing services, verification should be carried out for the respective items specified below.
59 Specifications ■ Basic Specifications General Power supply 120 V AC, 60 Hz Power consumption (approx.) 120 W Ambient operating temperature +5 °C - +45 °C (41 °F - 113 °F) Ambient operating humidity 5 - 90 % (without condensation) Dimensions 430 mm (W) x 88 mm (H) x 470 mm (D) [16.
Recording mode 60 ■ T able of Recording Length Approximate recording days Table 1 Caution: 1. Recording conditions: 8CH, Recording time: 10 hours/day, Stream type: "CBR", Audio selection: "Off", VMD: "Off", "I frame Inter.
61.
Panasonic Canada Inc. 5770 Ambler Drive,Mississauga, Ontario, L4W 2T3 Canada (905)624-5010 http://www.panasonic.ca Panasonic Sales Company Division of Panasonic Puerto Rico Inc.
Een belangrijk punt na aankoop van elk apparaat Panasonic WJ-RT208 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Panasonic WJ-RT208 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Panasonic WJ-RT208 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Panasonic WJ-RT208 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Panasonic WJ-RT208 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Panasonic WJ-RT208 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Panasonic WJ-RT208 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Panasonic WJ-RT208 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
