Gebruiksaanwijzing /service van het product ICI1000S Series van de fabrikant Pelco
Ga naar pagina of 40
Inter-Check ICI1000S Series Cash Register Interface System Installation/Operation Manual C1000M-B (1/96) ® PELCO • 3500 Pelco Way, Clovis, CA 93612-5699 • USA • (800) 289-9100 or (1-559) 292-19.
TABLE OF CONTENTS Section Page 1.0 W ARNINGS ........................................................................................................................................ 1 2.0 SCOPE .........................................................
TABLE OF CONTENTS (Continued) Section Page 4.8 LOCA TION ID SETUP ........................................................................................................... .1 8 4.8.1 Location ID Program ..............................................
LIST OF ILLUSTRA TIONS Figur e Page 1 Basic ICI1000S Configuration Wiring Diagram ............................................................................ 3 2 ICI1000PIM Wiring Configuration ........................................................
Pelco Manual C1000M-B (1/96) 1 Please thoroughly familiarize yourself with the information in this manual prior to installation and operation. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.
2 Pelco Manual C1000M-B (1/96) In addition to the high performance and reliability you’ve come to expect from Pelco products, the Inter - Check ICI1000S Series of fers the following MAIN FEA TURES: • Monitors one device, cash register or A TM ma- chine.
Pelco Manual C1000M-B (1/96) 3 Figure 1 . Basic ICI1000S Configuration W iring Diagram 3.0 INST ALLA TION T o begin installation, refer to the following instructions and Figures 1 and 2.
4 Pelco Manual C1000M-B (1/96) Figure 3 . Standard RS-232 Style Wiring Configuration Figure 2. ICI1000PIM Wiring Configuration BL YL GR T o Inter-Check Unit Straight through phone cable User-supplied cable. 18 A WG shielded wire is suggested BL YL GR From ICI1000PIM BL YL GR T o Inter-Check Unit Straight through phone cable User-supplied cable.
Pelco Manual C1000M-B (1/96) 5 Figure 4 . Printer Output and Alarm Input Wiring 3. Connect the data cable from the register interface cable (or PIM) to “DA T A IN” on the Inter -Check ICI1000S, using the ICI1000WK and 18 gauge, 2- conductor shielded cable (see Figure 1).
6 Pelco Manual C1000M-B (1/96) Figure 5 . Video Adjustment Locations 3.3 VIDEO ADJUSTMENTS All video adjustments are located on the bottom of the Inter -Check unit (refer to Figure 5). Using a non- metallic screwdriver, make any necessary adjustments as follows: • Horizontal Positioning adjusts the height of the displayed text.
Pelco Manual C1000M-B (1/96) 7 Figure 6 . Keypad Layout 1. Power down the Inter -Check ICI1000SI unit. 2. Remove the four cover screws with a Phillips screwdriver and set the cover aside. 3. Power up the ICI1000SI unit. 4. Program the Inter-Check unit for your particular application.
8 Pelco Manual C1000M-B (1/96) ICI1000S PROGRAMMING MENU TREE Monitoring Mode ↵ ENT Main Program Menu 1. Channel 1 Setup 2. System Parameters 3. Clock Setup 4. Location ID Setup 5. Customer Header 6. Diagnostics 7. Alarm Inputs Channel Program Menu 1.
Pelco Manual C1000M-B (1/96) 9 4.3 CHANNEL SETUP There are two ways you can view your current channel parameters: 1. Press the “1” key on your keypad while in the monitoring mode.
10 Pelco Manual C1000M-B (1/96) 1=ASCII OR 2=EBCDIC The fifth prompt sets up the character set for the Inter - Check ICI1000S Series. Press a “1” to select ASCII and “2” for EBCDIC. The ASCII character set is the most common whereas EBCDIC is used predominantly in IBM systems.
Pelco Manual C1000M-B (1/96) 11 4.5 VIDEO P ARAMETERS T o view the video parameters setting press #3 in the CHANNEL PROGRAM MENU. The Inter-Check ICI1000S Series will display the current settings. Press- ing ESC will skip the current line and allow you to con- tinue in the CHANNEL PROGRAM MENU.
12 Pelco Manual C1000M-B (1/96) The next prompt is: ALARM DWELL TIME IN SECONDS (001-255)=? Simply enter in the amount of time you wish the alarm- ing output to remain active in seconds and press ENT . The following prompts allow you to activate the alarm- ing output upon the occurrence of data and/or an ex- ception on the channel.
Pelco Manual C1000M-B (1/96) 13 4.6.5 Exception Alarm Settings Pr ogramming Exceptions EXCEPTIONS are situations of special inter - est that you can program into your Inter -Check ICI1000S Series unit. They are used to alarm your VCR or other alarmable devices when a certain condition has been met.
14 Pelco Manual C1000M-B (1/96) 4.6.6 Exception Alarm T ext Edit (Selection #6 in the System Program Menu) After Pressing #6 the following numbers will appear across your monitor screen: 12345678901234567890123456789012345678901234567890 = = This row of numbers is referred to as the Exception Column Line.
Pelco Manual C1000M-B (1/96) 15 Exceptions Using the COLUMN SPECIFIC Strategy This is used to flag on specific placement of text on the register ticket. This type of exception uses the (^) character on your keypad. It is used to capture text ac- cording to the position on the register ticket.
16 Pelco Manual C1000M-B (1/96) Exception Flagging Using WILDCARDS Used to flag on groups of transactions or departments. This type of exception also uses the caret (^) character and is usually used with the COLUMN SPECIFIC type of exception. Again, it is suggested that you use the EXCEPTION COLUMN LINE.
Pelco Manual C1000M-B (1/96) 17 Notice that the second double bar is placed directly af- ter the data you are interested in. This format holds true for any transaction you wish to flag using the double bar format. The first double bar has a leeway of 15 char - acters or spaces.
18 Pelco Manual C1000M-B (1/96) 4.7.2 Clock ID On and Scr een Position Set Selection 2 in the CLOCK PROGRAM MENU will turn the clock on and allow positioning on the screen. Press the arrow keys twice for each increment to move the time and date to the preferred position and press ENT to save.
Pelco Manual C1000M-B (1/96) 19 4.8.2 Location ID On and Screen Position Set Pressing 2 in the LOCA TION ID SETUP MENU will turn the ID on at all times. It also allows you to posi- tion the ID with the cursor control keys to the desired screen display position.
20 Pelco Manual C1000M-B (1/96) 4.10.4 Memor y T ests By entering 4 in this menu the following sub-menu is displayed: MEMOR Y TEST MENU 1. RAM TEST 2. VIDEO RAM TEST 3. (DL) NV MEMOR Y TEST 4. ROM CRC TEST By selecting 1, the unit will perform a self test on its Random Access Memory .
Pelco Manual C1000M-B (1/96) 21 2. Press #6 (you will hear two tones). The following text will appear: DIAGNOSTICS SELECTION MENU 1. PROGRAM TRANSFER 2. (DL) BURN IN TEST 3. (DL) INPUT CHANNEL POR T TEST 4. MEMOR Y TESTS 5. SYSTEM SIGNAL TEST 6. VIDEO SCREEN TEST 7.
22 Pelco Manual C1000M-B (1/96) Figure 8 . Printer Output and Alarm Input Wiring 4.11 ALARM INPUT (Selection #7 from the main menu) The ALARM INPUT can be connected to any normally open (open loop) alarm device that can trigger a clo- sure for at least one-half second.
Pelco Manual C1000M-B (1/96) 23 4.11.2 Alar m T rigger Dwell Selection #2 enables you to program the amount of time that the ALARM INPUT closure must be present in order for the Inter-Check ICI1000S Series to recognize it as a valid alarm condition.
24 Pelco Manual C1000M-B (1/96) 6. Print the ALARM INPUT text via auxiliary port. Do this by selecting #4 (AUXILIAR Y PRINT LINK) in the ALARM INPUT PROGRAM MENU. AUX PRINT 1=OFF 2=ON 7. The descriptor will describe the type of action that caused the alarm.
Pelco Manual C1000M-B (1/96) 25 5.0 TROUBLESHOOTING Symptom: System does not receive register data. 1. Power down the PIM, then repower it. If you re- ceive a display on your monitor with a register model number , the unit is receiving data from the PIM.
26 Pelco Manual C1000M-B (1/96) 5.1 TROUBLESHOOTING FLOW CHART.
Pelco Manual C1000M-B (1/96) 27 6.0 SPECIFICA TIONS MODELS ICI1000SI Single register interface with inter - nal keypad for programming; one (1) alarm output and thirty (30) program- mable exceptions I.
28 Pelco Manual C1000M-B (1/96) 7.0 WARRANTY AND RETURN INFORMATION Pelco, the Pelco logo, Camclosure, Esprit, Genex, Legacy, and Spectra are registered trademarks of Pelco. Endura and ExSite are trademarks of Pelco. © Copyright 1996, Pelco. All rights reserved.
Pelco Manual C1000M-B (1/96) 29 APPENDIX A. HEXADECIMAL, DECIMAL AND BINAR Y CONVERSION TABLES 0 0 00000000 1 1 00000001 2 2 00000010 3 3 00000011 4 4 00000100 5 5 00000101 6 6 00000110 7 7 00000111 8.
30 Pelco Manual C1000M-B (1/96) 64 100 01100100 65 101 01100101 66 102 01100110 67 103 01100111 68 104 01101000 69 105 01101001 6A 106 01101010 6B 107 01101011 6C 108 01101100 6D 109 01101101 6E 110 0.
Pelco Manual C1000M-B (1/96) 31 C8 200 11001000 C9 201 11001001 CA 202 11001010 CB 203 11001011 CC 204 11001100 CD 205 11001101 CE 206 11001110 CF 207 11001111 D0 208 11010000 D1 209 11010001 D2 210 1.
32 Pelco Manual C1000M-B (1/96) Installation instructions for configuring the ICI1000PIM interface module are provided under separate cover in manual C1005M-D. If for some reason this manual is not readily available, refer to the following section to configure the switch settings on the PIM interface module, if applicable to your installation.
Pelco Manual C1000M-B (1/96) 33 SWITCH BANK #2 This switch is dedicated to selecting which type of cash register the ICI1000PIM is interfacing with. The table below indicates the appropriate switch settings for a particular cash register . The first three settings indicate the appropriate settings for switches 1-3 on switch bank #1.
34 Pelco Manual C1000M-B (1/96) Register Bank #1 Bank #2 Type Switch # Switch # Selection 1 2 3 1 2 3 4 5 6 7 8 NIXDORF ........................................................................................................................ .. + X + + - - + + + + + OMRON RS5550/RS5560 Dot Matrix Printer .
Pelco Manual C1000M-B (1/96) 35 Figure 9 . ICI1000PIM Switch Settings ICI1000PIM INST ALLA TION/ TROUBLESHOOTING GUIDELINES Listed below are some simple troubleshooting steps at your disposal. Following these steps will ensure that your Inter-Check P .
36 Pelco Manual C1000M-B (1/96) Pelco 3500 Pelco Way, Clovis, CA 93612-5699 (209) 292-1981 • (800) 289-9100 FAX (800) 289-9150 or (209) 292-3827 (Product specifications subject to change without notice.
Een belangrijk punt na aankoop van elk apparaat Pelco ICI1000S Series (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Pelco ICI1000S Series heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Pelco ICI1000S Series vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Pelco ICI1000S Series leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Pelco ICI1000S Series krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Pelco ICI1000S Series bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Pelco ICI1000S Series kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Pelco ICI1000S Series . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
