Gebruiksaanwijzing /service van het product SC-LX77 van de fabrikant Pioneer
Ga naar pagina of 142
S C-L X 77 -K/-S S C-L X 87 -K/-S Operating Instructions AV Receiv er.
2 WARNING This equipment is not waterproof . To prevent a fire or shock hazard, do not place any container filled with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture.
3 Thank you for buying this Pioneer product. Please read through these operating instruc - tions so you will know how to operate your model properly. Contents 01 Before you start Checking what’s in the box ...........................................
4 10 Controlling the rest of your system About the Remote Setup menu ....................................................................................................................................... 85 Operating multiple receivers ..............
5 Flow of settings on the receiver Flow for connecting and setting the receiver The unit is a full-fledged AV receiver equipped with an abundance of functions and terminals. It can be used eas - ily after following the procedure below to make the connections and settings.
6 Checking what’s in the box ............................................................................................................ 7 Our philosophy ..............................................................................
7 01 Before you start Checking what’s in the box Please check that you’ve received the following supplied accessories: ! Setup microphone (cable: 5 m) ! Remote control unit ! AAA s.
8 01 Before you start % MHL TM (Mobile High-definition Link)-compatible device playback An incorporates MHL 2 mobile device can be connected to enjoy 3D videos, full-HD videos, high quality multi- channel audio, and photos etc., with charge the battery on the receiver.
9 01 Before you start Installing the receiver ! When installing this unit, make sure to put it on a level and stable surface. ! Don’t install it on the following places: — on a color TV (the screen may distort) — near a cassette deck (or close to a device that gives off a magnetic field).
10 01 Before you start Handling the CD-ROM Operating Environment ! AVNavigator can be used with Microsoft ® Windows ® XP/Windows Vista ® /Windows ® 7/Windows ® 8. ! A browser is at times used for AVNavigator functions. The supported browser is Microsoft Internet Explorer ® 8, 9 or 10.
11 Remote control .............................................................................................................................. 12 Display ...............................................................................
12 02 Controls and displays Remote control This section explains how to operate the remote control for the receiver. RECEIVER D. AC C ESS CH LEVEL DIMMER SLEEP THX SIGNAL SEL SPEAKERS .
13 02 Controls and displays 10 MULTI-ZONE select buttons Switch to perform operations in ZONE 2 , ZONE 3 and HDZONE ( page 80 ). 11 Remote control LED Lights when a command is sent from the remote control. 12 Switches the remote to control the receiver (used to select the white commands).
14 02 Controls and displays Display HDMI DIGIT AL ANALOG L C R SL SR XL XR XC LFE AUTO DIGIT AL PL US AU TO SURROUND STREAM DIRECT PROL OGIC x Neo: 6 THX AD V .
15 02 Controls and displays Front panel PHONES SPEAKERS MULTI-ZONE CONTROL ZONE 2 ON/OFF ZONE 3 ON/OFF HDZONE ON/OFF MCACC SETUP MIC ENTER TUNE TUNE (HDMI) PRESET PRESET VIDEO PARAMETER AUDIO PARAMETER with USB HDMI 5 INPUT/ MHL ( 5V 0.
16 02 Controls and displays 20 iPod/iPhone/iPad terminals Use to connect your Apple iPod/iPhone/iPad as an audio and video source ( page 41 ), or connect a USB device for audio and photo playback ( page 42 ). 21 HDMI input/MHL connector Use for connection to a compatible HDMI device (Video camera, etc.
17 Connecting your equipment ......................................................................................................... 18 Rear panel ......................................................................................
18 03 Connecting your equipment Connecting your equipment This receiver provides you with many connection possibilities, but it doesn’t have to be difficult. This chapter explains the kinds of components you can connect to make up your home theater system.
19 03 Connecting your equipment Determining the speakers’ application This unit is equipped with speaker terminals for 11 channels, allowing users to select a variety of speaker layouts/ usage patterns according to their tastes.
20 03 Connecting your equipment [D] 7.2 channel surround system (Surround back) & ZONE 2 connection (Multi Zone) ! Speaker System setting: 7.1ch + ZONE 2 With these connections you can simultaneously enjoy 7.2-channel surround sound in the main zone with stereo playback on another component in ZONE 2.
21 03 Connecting your equipment [H] 5.2 channel surround system & Speaker B Bi-amping connection ! Speaker System setting: 5.1ch + SP-B Bi-Amp With these connections you can simultaneously enjoy 5.2-channel surround sound in the main zone with stereo playback of the same sound on the B speakers.
22 03 Connecting your equipment Placing the speakers Refer to the chart below for placement of the speakers you intend to connect. L SW 2S W 1 C FHL FWL SL SBL SBR SB SR FWR R FHR 30 30 60 60 60 120 120 ! Place the surround speakers at 120º from the center.
23 03 Connecting your equipment Bi-amping your speakers Bi-amping is when you connect the high frequency driver and low frequency driver of your speakers to different amplifiers for better crossover performance.
24 03 Connecting your equipment Installing your speaker system At the very least, front left and right speakers only are necessary. Note that your main surround speakers should always be connected as a pair, but you can connect just one surround back speaker if you like (it must be con - nected to the left surround back terminal).
25 03 Connecting your equipment [C] 7.2 channel surround system & Front Bi-amping connection (High quality surround) ! Select ‘ 7.1ch Front Bi-Amp ’ from the Speaker System menu. See Speaker system setting on page 100 to do this.
26 03 Connecting your equipment [E] 7.2 channel surround system (Front height/Front wide) & ZONE 2 connection (Multi Zone) ! Select ‘ 7.1ch FH/FW + ZONE 2 ’ from the Speaker System menu. See Speaker system setting on page 100 to do this.
27 03 Connecting your equipment [G-1] 5.2 channel surround system & ZONE 2/ZONE 3 connection (Multi Zone) [G-2] Multi-ZONE Music See Speaker system setting on page 100 to do this.
28 03 Connecting your equipment [I] 5.2 channel surround system & Front and Surround Bi-amping connection (High quality surround) ! Select ‘ 5.1ch F+Surr Bi-Amp ’ from the Speaker System menu. See Speaker system setting on page 100 to do this.
29 03 Connecting your equipment [K] 5.2 channel surround system & Center and Surround Bi-amping connection (High quality surround) ! Select ‘ 5.1ch C+Surr Bi-Amp ’ from the Speaker System menu. See Speaker system setting on page 100 to do this.
30 03 Connecting your equipment About the video converter The video converter ensures that all video sources are output through the HDMI OUT 1 and HDMI OUT 2 terminals. If the TV is only connected to the receiver’s composite VIDEO MONITOR OUT jacks, all the other video devices must be connected through composite connections.
31 03 Connecting your equipment Connecting your TV and playback components Connecting using HDMI If you have an HDMI or DVI (with HDCP) equipped component (Blu-ray Disc player (BD), etc.), you can connect it to this receiver using a commercially available HDMI cable.
32 03 Connecting your equipment Connecting your DVD player with no HDMI output This diagram shows connections of a TV (with HDMI input) and DVD player (or other playback component with no HDMI output) to the receiver. BD IN LA N ( 10/100 ) DC OUTPUT fo r WIRELESS LAN ( OUTPUT 5 V 0.
33 03 Connecting your equipment ! In order to listening to HD audio with this receiver, connect an HDMI cable, and use analog video cable for video signal input. Depending on the player, it may not be possible to output video signals to both HDMI and other video output (composite, etc.
34 03 Connecting your equipment ! If your HDD/DVD recorder, BD recorder, etc., is equipped with an HDMI output terminal, we recommend con - necting it to the receiver’s HDMI DVR/BDR IN terminal. When doing so, also connect the receiver and TV by HDMI (see Connecting using HDMI on page 31 ).
35 03 Connecting your equipment ! Even if your set-top box is equipped with an HDMI output terminal, in some cases the sound is output from the digital audio output (optical or coaxial) and only the video is output from the HDMI output terminal.
36 03 Connecting your equipment Connecting additional amplifiers This receiver has more than enough power for any home use, but it’s possible to add additional amplifiers to every channel of your system using the pre-outs. Make the connections shown below to add amplifiers to power your speakers.
37 03 Connecting your equipment Connecting AM/FM antennas Connect the AM loop antenna and the FM wire antenna as shown below. To improve reception and sound quality, connect external antennas (see Connecting external antennas on page 37 ).
38 03 Connecting your equipment MULTI-ZONE setup This receiver can power up to four independent systems in separate rooms after you have made the proper MULTI-ZONE connections. Different sources can be playing in four zones at the same time or, depending on your needs, the same source can also be used.
39 03 Connecting your equipment MULTI-ZONE setup using speaker terminals (ZONE 2) Either the surround back or the front wide speaker terminals can be used as the speaker terminals for ZONE 2. For details, see Determining the speakers’ application on page 19 .
40 03 Connecting your equipment MULTI-ZONE setup using HDMI terminal (HDZONE) Important ! MAIN/HDZONE at ZONE Setup must be set to HDZONE in order to use the HDZONE function ( page 106 ). ! To use the HDZONE functions, set Control or Control Mode in HDMI Setup to OFF .
41 03 Connecting your equipment Connecting optional Bluetooth ADAPTER When the Bluetooth ® ADAPTER (AS-BT100 or AS-BT200) is connected to this receiver, a product equipped with Bluetooth wireless technology (portable cell phone, digital music player, etc.
42 03 Connecting your equipment Connecting a USB device It is possible to play audio and photo files by connecting USB devices to this receiver. HDMI 5 INPUT/ MHL ( 5V 0.9 A ) AUTO/ALC / D IRECT HOME TH XB AND TUNER EDIT iPod iPhone iPad DIRECT CONTROL with USB 5V 2.
43 03 Connecting your equipment Note This unit cannot be used to play audio files from a computer unless Media Player is installed on the connected computer. Connecting to a wireless LAN The wireless LAN converter can be connected to connect this unit to a network wirelessly.
44 03 Connecting your equipment Switching components on and off using the 12 volt trigger You can connect components in your system (such as a screen or projector) to this receiver so that they switch on or off using 12 volt triggers when you select an input function.
45 Automatically conducting optimum sound tuning (Full Auto MCACC) .................................... 46 The Input Setup menu ...........................................................................................................
46 04 Basic Setup Automatically conducting optimum sound tuning (Full Auto MCACC) The Full Auto MCACC Setup measures the acoustic characteristics of your listening area, taking into account ambient noise, speaker connection and speaker size, and tests for both channel delay and channel level.
47 04 Basic Setup Now Analyzing... 2/10 Environment Check 1a.Full Auto MCACC A/V RECEIVER Exit Cancel Ambient Noise : OK Microphone : Speaker YES/NO : L : YE S FH L : YE S C : YES FHR : YE S R : YES SR : YE S SBR : YES SB L : YE S SL : YES SW : YE S 1a.
48 04 Basic Setup Input function default and possible settings The terminals on the receiver generally correspond to the name of one of the input functions.
49 04 Basic Setup Operable settings/items Descriptions Page Other functions INPUT SELECT ( INPUT SELECTOR ) Switches the input. 51 VOLUME + / – , MUTE Use to set the listening volume. 51 LISTENING MODE Selects your favorite listening modes.
50 Playing a source ............................................................................................................................. 51 Playing an iPod ......................................................................
51 05 Basic playback Playing a source Here are the basic instructions for playing a source (such as a DVD disc) with your home theater system.
52 05 Basic playback Playing an iPod This receiver has the iPod/iPhone/iPad terminal that will allow you to control playback of audio content from your iPod using the controls of this receiver. Here we describe the procedure for playback on an iPod.
53 05 Basic playback Playing a USB device It is possible to play files using the USB interface on the front of this receiver. ! Compatible USB devices include external magnetic hard drives, portable flash memory drives (particularly key drives) and digital audio players (MP3 players) of format FAT16/32.
54 05 Basic playback About playable file formats The USB function of this receiver supports the following file formats. Note that some file formats are not available for playback although they are listed as playable file formats.
55 05 Basic playback Playing music from a computer SC-LX87 only Use this function to play digital audio input to the unit’s rear panel USB-DAC IN terminal. Important ! When switching this unit’s input from USB-DAC to another input, first quit the computer’s music playback application, then switch the input.
56 05 Basic playback Saving station presets If you often listen to a particular radio station, it’s convenient to have the receiver store the frequency for easy recall whenever you want to listen to that station. This saves the effort of manually tuning in each time.
57 05 Basic playback Bluetooth ADAPTER for Wireless Enjoyment of Music This receiver Re mote control operation Music data Bluetooth ® ADAPTER Bluetooth wireless technology enabled dev.
58 05 Basic playback Listening to music contents of a Bluetooth wireless technology device with your system 1 Press ADPT on the remote control to switch the receiver to ADAPTER PORT input. 2 From the Bluetooth wireless technology device, perform the operation to connect to the Bluetooth ADAPTER.
59 Enjoying various types of playback using the listening modes ................................................ 60 Selecting MCACC presets ...............................................................................................
60 06 Listening to your system Enjoying various types of playback using the listening modes Using this receiver, you can listen to any source in surround sound. However, the options available will depend on your speaker setup and the type of source you’re listening to.
61 06 Listening to your system Using the Home THX modes THX and Home THX are technical standards created by THX Ltd. for cinema and home theater sound. Home THX is designed to make home theater audio sound more like what you hear in a cinema.
62 06 Listening to your system Using Stream Direct Use the Stream Direct modes when you want to hear the truest possible reproduction of a source. All unneces - sary signal processing is bypassed, and you’re left with the pure analog or digital sound source.
63 06 Listening to your system Better sound using Phase Control This receiver’s Phase Control feature uses phase correction measures to make sure your sound source arrives at the listening position in phase, preventing unwanted distortion and/or coloring of the sound.
64 06 Listening to your system Using the Full Band Phase Control’s FRONT ALIGN function Full Band Phase Control calibrates frequency phase disturbances (group delay) for the full spe.
65 Introduction ................................................................................................................................... 66 Playback with Network functions ....................................................
66 07 Playback with NETWORK features Introduction This receiver is equipped with the LAN terminal and you can enjoy the following features by connecting your components to these terminals.
67 07 Playback with NETWORK features About HTC Connect This receiver features “HTC Connect”, a simple way to enjoy music content from your HTC Connect certified smart phone.
68 07 Playback with NETWORK features Registering broadcast stations not on the vTuner list from the special Pioneer site With the receiver, broadcast stations not included on the list of station distributed by vTuner can be registered and played.
69 07 Playback with NETWORK features About network playback The network playback function of this unit uses the following technologies: Windows Media Player See Windows Media Player 11/Windows Media Player 12 on page 130 for more on this.
70 07 Playback with NETWORK features About playable file formats The NETWORK feature of this receiver supports the following file formats. Note that some file formats are not available for playback although they are listed as playable file formats.
71 About the Control with HDMI function ....................................................................................... 72 Making Control with HDMI connections ...................................................................
72 08 Control with HDMI function About the Control with HDMI function Synchronized operations below with a Control with HDMI-compatible Pioneer TV or Blu-ray Disc player are pos - sible when the component is connected to the receiver using an HDMI cable.
73 08 Control with HDMI function 10 Select the ‘Speaker B Link’ setting you want. When ON is selected here, the speaker terminals that are played (the SPEAKERS button setting) can be changed automatically when HDMI OUT 1 and HDMI OUT 2 are switched.
74 08 Control with HDMI function Stream Smoother Link Using the Control with HDMI function, the receiver automatically detects whether a compressed video file is being played on the player, and if so automatically activates the Stream Smoother function.
75 Setting the Audio options ............................................................................................................ 76 Setting the Video options ....................................................................
76 09 Using other functions Setting the Audio options There are a number of additional sound settings you can make using the AUDIO PARAMETER menu.
77 09 Using other functions Setting What it does Option(s) Loud Mgmt (Loudness Management) Adjusts the level of dynamic range for movie soundtracks optimized for Dolby TrueHD (you may need to use this feature when listening to surround sound at low volumes).
78 09 Using other functions m ! This can be set when MANUAL is selected for V.SPs . ! You can’t use the Virtual Height mode when the headphones are connected to this receiver or when any of the stereo, Front Stage Surround Advance, Sound Retriever Air or Stream Direct modes is selected.
79 09 Using other functions Setting What it does Option(s) BNR <d, e> Reduces block noise (block-shaped distortion generated upon MPEG compression) in the picture.
80 09 Using other functions Switching the speaker terminals If you selected 9.1ch FH/FW , 7.1ch + Speaker B , 7.1ch FH/FW + ZONE 2 or 5.1ch + SP-B Bi-Amp at Speaker system setting on page 100 , you can switch between speakers using the SPEAKERS button.
81 09 Using other functions ZONE 2 remote controls Press the remote control’s ZONE 2 to operate the corresponding zone. The following table shows the possible ZONE 2 remote controls: Button(s) What it does u Switches on/off power in the sub zone.
82 09 Using other functions Using the sleep timer The sleep timer switches the receiver into standby after a specified amount of time so you can fall asleep without worrying about the receiver being left on all night. Use the remote control to set the sleep timer.
83 09 Using other functions Resetting the system Use this procedure to reset all the receiver’s settings to the factory default. Use the front panel controls to do this. Set MULTI-ZONE to MULTI ZONE OFF . ! Disconnect the iPod and USB memory device from the receiver beforehand.
84 About the Remote Setup menu .................................................................................................... 85 Operating multiple receivers .......................................................................
85 10 Controlling the rest of your system About the Remote Setup menu The Remote Setup mode is set by pressing the number button while pressing RCU SETUP . The different items on the Remote Setup menu are described below. For their setting procedures, refer to the explanations for the respective items.
86 10 Controlling the rest of your system 4 Repeat steps 2 through 3 for the other components you want to control. To try out the remote control, switch the component on or off (into standby) by pressing u SOURCE . If it doesn’t seem to work, select the next code from the list (if there is one).
87 10 Controlling the rest of your system Erasing all learnt settings that are in one input function This operation erases all the operational settings of other devices that have been programmed in one input func - tion, and restores the factory default.
88 10 Controlling the rest of your system Resetting the remote control settings Use this procedure to reset all the remote control’s settings to the factory default. ! When preset codes are set, all the signals learned in the input function buttons are cleared.
89 10 Controlling the rest of your system TV and Audio/Video components Button(s) TV TV (Monitor) BD/DVD HDD/BDR/ DVR VCR SAT/CATV u SOURCE POWER ON/ OFF POWER ON/ OFF POWER ON/ OFF PO.
90 10 Controlling the rest of your system TV (Projector) Button(s) TV (Projector) u SOURCE POWER ON 1 MOVIE 2 STANDARD 3 DYNAMIC 4 USER1 5 USER2 6 USER3 7 COLOR+ 8 SHARP+ 9 GAMMA 0 COLOR– ! /CLR SHARP– ENTER (CLASS) COLOR TEMP EXIT INFO i / j / k / l i / j / k / l ENTER ENTER TEST HIDE MENU m HDMI1 d HDMI2 n COMP.
91 Making receiver settings from the Advanced MCACC menu .................................................... 92 Automatic MCACC (Expert) .................................................................................................
92 11 The Advanced MCACC menu Making receiver settings from the Advanced MCACC menu The Advanced MCACC (Multi Channel ACoustic Calibration) system was developed in Pioneer’s laboratories with the aim of making it possible for home users to perform adjustments of the same level as in a studio easily and with high precision.
93 11 The Advanced MCACC menu 3 Connect the microphone to the MCACC SETUP MIC jack on the front panel. Make sure there are no obstacles between the speakers and the microphone. PHONES SPEAKERS MULTI-ZON E CONTROL ZONE 2 ON/OFF ZONE 3 ON/OFF HDZONE ON/OFF (HDMI) with USB HDMI 5 INPUT/ MHL ( 5V 0.
94 11 The Advanced MCACC menu Manual MCACC setup You can use the settings in the Manual MCACC setup menu to make detailed adjustments when you’re more familiar with the system. Before making these settings, you should have already completed Automatically con - ducting optimum sound tuning (Full Auto MCACC) on page 46 .
95 11 The Advanced MCACC menu Standing Wave ! Default setting: ON / ATT 0.0dB (all filters) Acoustic standing waves occur when, under certain conditions, sound waves from your speaker system resonate mutually with sound waves reflected off the walls in your listening area.
96 11 The Advanced MCACC menu 3 If you selected ‘Reverb Measurement’, select EQ ON or EQ OFF, and then START. The following options determine how the reverb characteristics of your.
97 11 The Advanced MCACC menu Checking MCACC Data At the procedure of Automatically conducting optimum sound tuning (Full Auto MCACC) on page 46 , the proce - dure of Automatic MCACC (Expert) on page 92 or after fine-adjusting at Manual MCACC setup on page 94 , you can check your calibrated settings using the GUI screen.
98 11 The Advanced MCACC menu Data Management This system allows you to store up to six MCACC presets, allowing you to calibrate your system for different listen - ing positions (or frequency adjustments for the same listening position).
99 Making receiver settings from the System Setup menu .......................................................... 100 Manual speaker setup ................................................................................................
100 12 The System Setup and Other Setup menus Making receiver settings from the System Setup menu The following section describes how to change the speaker-related settings manually and make various other settings (input selection, OSD language selection, etc.
101 12 The System Setup and Other Setup menus Using Multi-ZONE Music Multi-ZONE Music can be used to play the same sound in the MAIN ZONE, ZONE 2 and ZONE 3, for example for home parties. Normally set Speaker System to 5.1ch + ZONE 2+3 for multi-zone/multi-source playback, then switch it to Multi-ZONE Music when having a home party.
102 12 The System Setup and Other Setup menus Speaker Distance For good sound depth and separation from your system, you need to specify the distance of your speakers from the listening position. The receiver can then add the proper delay needed for effective surround sound.
103 12 The System Setup and Other Setup menus Network Setup menu Make the settings for connecting the receiver to the Internet and using the network functions. 1 Press on the remote control, then press HOME MENU. A Graphical User Interface (GUI) screen appears on your TV.
104 12 The System Setup and Other Setup menus Parental Lock Set restrictions for using Internet services. Also set the password accompanying the usage restrictions.
105 12 The System Setup and Other Setup menus Volume Setup You can set the maximum volume of this receiver or specify what the volume level will be when the power is turned on. 1 Select ‘Volume Setup’ from the Other Setup menu. 2 Select the Power ON Level setting you want.
106 12 The System Setup and Other Setup menus ZONE Setup The volume setting and tone for the sub zones that can be used with this receiver can be changed and adjusted here. CAUTION ! Note that when Volume Level is set to 0 dB Fixed , the audio output from the AUDIO ZONE 2 OUT terminals is set to the maximum.
107 12 The System Setup and Other Setup menus Play ZONE Setup Select the zone for playing the audio contents of devices in the home network when using in the DMR mode. ! For playable DLNA-compatible network devices, see page 66 . 1 Select ‘Play ZONE Setup’ from the Other Setup menu.
108 12 The System Setup and Other Setup menus Making network settings using Safari 1 Launch Safari on your computer. 2 Press Bookmark icon. Click Bonjour list (a), and then select this receiver’s name (Friendly Name) (b) in Bookmark.
109 12 The System Setup and Other Setup menus Using Safari to update the firmware 1 Launch Safari on your computer. 2 Press Bookmark icon.
110 Troubleshooting .......................................................................................................................... 111 Power ..................................................................................
111 13 FAQ Troubleshooting Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component.
112 13 FAQ Symptoms Remedies No sound from front height or front wide speakers. Check that the front height or front wide speakers are set to LARGE or SMALL , and the surround speakers are not set to NO (see Speaker Setting on page 101 ).
113 13 FAQ Symptoms Remedies The maximum volume available (shown in the front panel display) is lower than the +12dB maximum. Check that the Volume Limit is set to OFF (see Volume Setup on page 105 ). The channel level setting may be over 0.
114 13 FAQ Settings Symptoms Remedies The Auto MCACC Setup continually shows an error. The ambient noise level may be too high. Keep the noise level in the room as low as possible (see also Problems when using the Auto MCACC Setup on page 47 ).
115 13 FAQ Symptoms Remedies When playing a disc with the listen - ing mode set to Auto Surround or ALC, 2 Pro Logic II or DTS Ne o:X appear on the receiver. Make sure that the receiver is set to AUTO or DIGITAL (see Choosing the input signal on page 62 ).
116 13 FAQ Symptoms Remedies Synchronized operation not possible using Control with HDMI function. Check the HDMI connections. The cable may be damaged. Select ON for the Control Mode with HDMI setting (see HDMI Setup on page 72 ). Turn the TV’s power on before turning on this receiver’s power.
117 13 FAQ USB interface Symptoms Causes Remedies The folders/files stored on a USB memory device are not displayed. The folders/files are currently stored in a region other than the FAT (File Allocation Table) region. Store the folders/files in the FAT region.
118 13 FAQ Symptoms Causes Remedies Cannot access the com - ponent connected to the network. The component connected to the network is not properly set. If the client is automatically authorized, you need to enter the corresponding information again.
119 13 FAQ Wireless LAN Network cannot be accessed via wireless LAN. Wireless LAN converter’s power is not on. (Wireless LAN converter’s “Power”, “WPS” and “Wireless” indica - tors are not all lit.
120 Surround sound formats ............................................................................................................. 121 About THX ....................................................................................
121 14 Additional information Surround sound formats Below is a brief description of the main surround sound formats you’ll find on BDs, DVDs, satellite, cable and terrestrial broadcasts, and video cassettes. Dolby The Dolby technologies are explained below.
122 14 Additional information THX Ultra2 Plus Before any home theatre component can be THX Ultra2 Plus certified, it must incorporate all the features above and also pass a rigorous series of quality and performance tests.
123 14 Additional information About iPod AirPlay works with iPhone, iPad, and iPod touch with iOS 4.3.3 or later, Mac with OS X Mountain Lion, and Mac and PC with iTunes 10.
124 14 Additional information Auto Surround, ALC and Stream Direct with different input signal formats The following charts show what you will hear with different input signal formats, depending on the Stream Direct mode (see Using Stream Direct on page 62 ) you have selected.
125 14 Additional information If the subwoofer must be installed near a wall, place it at an angle so that it is not parallel to the wall surface. This can help reduce any sympathetic vibrations, but depending on the shape of the room this could result in stand - ing waves.
126 14 Additional information Important information regarding the HDMI connection There are cases where you may not be able to route HDMI signals through this receiver (this depends on the HDMI-equipped component you are connecting-check with the manufacturer for HDMI compatibility information).
127 14 Additional information Usable range ! Designed for use only within private homes (signal transmission distance may be reduced due to room design or conditions). In the following cases, this wireless LAN converter cannot operate due to poor or erratic radio wave transmission.
128 14 Additional information Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC Manufacturer: PIONEER CORPORA TION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan EU Representative’s: Pioneer Europe NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium http://www .
129 14 Additional information Glossary Audio formats/Decoding Dolby The Dolby technologies are explained below. See http://www.dolby.com for more detailed information. Dolby Digital Dolby Digital is a multichannel digital audio coding system widely used in cinemas, and in the home for DVD and digital broadcast soundtracks.
130 14 Additional information Virtual Height When you’re not using front height speakers, selecting this mode allows you to hear a virtual front height channel through your front speakers.
131 14 Additional information Router A device for relaying data flowing on a network to another network. In homes, routers often also function as DHCP servers. Products with built-in wireless LAN access points are called “wireless LAN routers”.
132 14 Additional information Features index Operation Mode See Operation Mode Setup on page 48 . AVNavigator for Windows, AVNavigator for Mac, AVNavigator for iPad See About using AVNavigator (included CD-ROM) on page 9 . Audio Scaler See Setting the Audio options on page 76 .
133 14 Additional information Specifications Amplifier section Multi channel simultaneous power output (1 kHz, 1 %, 8 W ) 9 ch total ......................................................................................................
134 14 Additional information Preset code list You should have no problem controlling a component if you find the manufacturer in this list, but please note that there are cases where codes for the manufacturer in the list will not work for the model that you are using.
135 14 Additional information Naonis 0145 NEC 0147, 0229 Neckermann 0125, 0138, 0141, 0145, 0149, 0150, 0152, 0155, 0229 NEI 0149, 0152, 0155 Neufunk 0154, 0155 New Tec.
136 14 Additional information BD If operations are not possible using the preset codes below, you may be able to conduct operations with the preset codes for the DVD , DVR (BDR, HDR) .
137 14 Additional information Satellite Set Top Box Pioneer 6220, 6219, 6204 @sat 6251 @Sky 6238 ABsat 6180 Acoustic Solutions 6217 ADB 6174 Akai 6214 Akura 6228 Alba 6176, 6200, 6180,.
138 14 Additional information Starland 6180 Starlite 6214 Stream 6212 Stream System 6251 Strong 6220, 6228, 6256, 6200, 6180, 6245, 6217, 6239 Sumin 6199 Sunny 6251 Sunsat 6180 Sunstar.
© 2013 PIONEER CORPORA TION. All rights reser v ed. <ARB7500-A> PIONEER CORPORA TION 1-1, Shin-ogura, Saiwai-ku, Ka wasaki-shi, Kanaga wa 212-0031, J apan PIONEER ELECTRONICS (USA) INC. P. O. BO X 1540, Long Beach, California 90801-1540, U. S .
140 14 Aanvullende informatie Satelliet-settopbox Pioneer 6220, 6219, 6204 @sat 6251 @Sky 6238 ABsat 6180 Acoustic Solutions 6217 ADB 6174 Akai 6214 Akura 6228 Alba 6176, 6200, 6180, 6.
.
<ARC8148-A> PIONEER CORPORA TION 1-1, Shin-ogura, Saiwai-ku, Ka wasaki-shi, Kanaga wa 212-0031, Japan PIONEER ELECTRONICS (USA) INC. P. O. BO X 1540, Long Beach, California 90801-1540, U. S.A. TEL: (800) 421-1404 PIONEER ELECTRONICS OF CANAD A, INC.
Een belangrijk punt na aankoop van elk apparaat Pioneer SC-LX77 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Pioneer SC-LX77 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Pioneer SC-LX77 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Pioneer SC-LX77 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Pioneer SC-LX77 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Pioneer SC-LX77 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Pioneer SC-LX77 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Pioneer SC-LX77 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.