Gebruiksaanwijzing /service van het product PR6020 van de fabrikant Planar
Ga naar pagina of 37
PR6020 DLP ® Projector USER'S MANUAL www .planar .com.
Planar Systems, Inc Corporate Headquarters 1 195 NW Compton Drive Beaverton, OR 97006-1992 Planar Customer Support T elephone: US: 1-866-PLANAR1 (866) 752-6271 Outside US: (503) 748-5799 E-mail: PlanarSupport@planar .com Online T echnical Library: http://www .
The information contained in this document is subject to change without notice. This document contains proprietary information that is protected by copyright.
1 English Table of Contents T able of Contents ......................................................................................... 1 Usage Notice ................................................................................................ 2 Precautions.
2 English Usage Notice Precautions Follow all warnings, precautions and maintenance as recom- mended in this user’s guide to maximize the life of your unit. Warning- Do not look into the projector’s lens when the lamp is on. The bright light may hurt your eyes.
3 English Usage Notice Do: Turn off the product before cleaning. Use a soft cloth moistened with mild detergent to clean the display housing. Disconnect the power plug from AC outlet if the product is not being used for a long period of time.
4 English Introduction Product Features Congratulations and Thank You for choosing the PR6020 projector. This product is a XGA single chip DLP ® projector. Outstanding features include: True XGA, 1024 x 768 addressable pixels Texas Instruments Single chip DLP ® Technology NTSC/NTSC4.
5 English Introduction Power Cord 1.8m VGA Cable 1.8m Wireless Remote Controller Composite Video Cable 1.8m Projector with lens cap Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immedi- ately if anything is missing.
6 English Introduction 1. Control Panel 2. Zoom Lever 3. Power Socket 4. Speaker 5. Elevator Button 6. Zoom Lens 7. Focus Ring 8. IR Receiver 9. Connection Ports Main Unit Product Overview 1 2 5 6 1 8.
7 English Introduction Control Panel 1. Enter 2. Menu (On/Off) 3. Power 4. Four Directional Select Keys 1 2 3 8 9 7 6 5 4 Connection Ports 1. VGA-In Connector (PC Analog signal/SCART RGB/ HDTV/Component Video Input) 2. Composite Video Input Connector 3.
8 English Introduction Remote Control with Laser Pointer 1. Enter 2. Four Directional Select Keys 3. Keystone +/- 4. Page Up 5. Page Down 6. Source Select 7.
9 English Setting Up Connecting the Projector S-Video Output Video Output DVD Player, Settop Box, HDTV receiver 1................................................................................................................ VGA Cable 2..............
10 English Setting Up Powering On the Projector 1. Remove the lens cap. 2. Ensure that the power cord and signal cable are securely connected. The Power LED will ash green . 3. Turn on the lamp by pressing “Power” button on the control panel and the Power LED will turn green .
1 1 English Setting Up Warning Indicator When the “LAMP” indicator lights solid red, the projector will automatically shut itself down. Please contact your local reseller or service center. When the “TEMP” indicator lights solid red for about 60 seconds, it indicates the projector has been overheated.
12 English Setting Up Adjusting the Projected Image Adjusting the Projector Image Height Tilt Adjusting Foot Elevator Foot Elevator Button The projector is equipped with elevator foot for adjusting the image height. To raise the image: 1. Press the elevator button .
13 English Setting Up 69.3" (176.1cm) 1 15.6" (293.5cm) 161.8" (410.9cm) 208.0" (528.3cm) 277.3" (704.4cm) 38.1" (96.8cm) 76.
14 English User Controls Using the Control Panel Power Refer to the “Power On/Off the Projector” section on pages 10-11. Source Press “Source” to select an input signal. Menu Turns the menu On or Off. Four Direc- tional Select Keys Use to navigate through the menus.
15 English User Controls Using the Remote Control Power Refer to the “Power On/Off the Projector” section on pages 10-11. Resync Automatically synchronizes the projector to the input source. Laser Aim the remote at the viewing screen, press and hold this button to activate the laser pointer.
16 English User Controls The Projector has multilingual On Screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to Operate 1. To open the OSD menu, press “Menu” on the Remote Control or Control Panel.
17 English User Controls Menu Tree.
18 English User Controls Language Language Choose the multilingual OSD menu. Use the or key to select your preferred language. Press “Enter” to nalize the selection.
19 English User Controls Display Mode There are many factory presets optimized for various types of im- ages. PC: For computer or notebook. (brightest image) Movie: For home theater. sRGB: For standard PC color. (best color reproduction) Bright: For bright mode.
20 English User Controls mum peaking. If you prefer a brighter image, adjust towards the maximum setting. For a smooth and more natural image, adjust towards the minimum setting. Color Temp. Adjusts the color temperature. At higher temperature, the screen looks colder; at lower temperature, the screen looks warmer.
21 English User Controls Frequency “Frequency” changes the display data frequency to match the fre- quency of your computer’s graphic card. If you experience a vertical ickering bar, use this function to make an adjustment. Tracking “Tracking” synchronizes the signal timing of the display with the graphic card.
22 English User Controls 16:9 Image Position Adjust the image position up or down, when you select the aspect ratio of 16:9. Press the to move the image down. Press the to move the image up. Input Signal Display area Picture area Display on Screen “16:9 Image Posi - tion” function is supported under 16:9 aspect ratio.
23 English User Controls Degamma This allows you to choose a degamma table that has been ne-tuned to bring out the best image quality for the input. Saturation Adjusts a video image from black and white to fully saturated color. Press the to decrease the amount of saturation in the image.
24 English User Controls “16:9 Image Posi - tion” function is supported under 16:9 aspect ratio. Input Signal Display area Picture area Display on Screen 16:9 Image Position Adjust the image position up or down, when you select the aspect ratio of 16:9.
25 English User Controls Volume Press to decrease the volume. Press to increase the volume. Mute Choose the left icon to turn mute on. Choose the right icon to turn mute off.
26 English User Controls Menu Location Choose the menu location on the display screen. Projection Front-Desktop The factory default setting. Rear-Desktop When you select this function, the projector reverses the image so you can project from behind a translucent screen.
27 English User Controls Lamp Setting Lamp Hours Displays the cumulative lamp operating time. Lamp Reset Resets the lamp life hour counter after replacing the lamp. Lamp Reminder Choose this function to show or to hide the warning message when the changing lamp message is displayed.
28 English Appendices Problem: No image appears on screen Ensure all the cables and power connections are correctly and securely connected as described in the “Setting Up” section. Ensure the pins of connectors are not crooked or broken. Check if the projection lamp has been securely installed.
29 English Appendices 4. Verify the resolution setting is less than or equal to 1600 x 1200 resolution. 5. Select the “Change” button under the “Monitor” tab. 6. Click on “Show all devices.” Next, select “Standard monitor types” under the SP box; choose the resolution mode you need under the “Models” box.
30 English Appendices Make sure the projection screen is between distances 4.9 to 39.4 feet (1.5 to 12.0 meters) from the projector. See page 13. Problem: The image is stretched when displaying 16:9 DVD The projector automatically detects 16:9 DVD and adjusts the aspect ratio by digitizing to full screen with 4:3 default setting.
31 English Appendices Problem: Message Reminders Fan fail: Over temperature: Power Off: Replace the lamp:.
32 English Appendices Replacing the Lamp The projector keeps track of the lamp usage. It will show you a warning message When you see this message, change the lamp as soon as pos- sible. Make sure the projector has cooled down for at least 30 minutes before changing the lamp.
33 English Appendices Remark: “ * ”com- pressed computer image. Compatibility Modes Mode Resolution (ANALOG) V.Frequency (Hz) H.Frequency (kHz) VESA VGA 640 x 350 70 31.5 VESA VGA 640 x 350 85 37.9 VESA VGA 640 x 400 85 37.9 VESA VGA 640 x 480 60 31.
Planar Systems, Inc Corporate Headquarters 1 195 NW Compton Drive Beaverton, OR 97006-1992 Planar Customer Support T elephone: US: 1-866-PLANAR1 (866) 752-6271 Outside US: (503) 748-5799 E-mail: PlanarSupport@planar .com Online T echnical Library: http://www .
Een belangrijk punt na aankoop van elk apparaat Planar PR6020 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Planar PR6020 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Planar PR6020 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Planar PR6020 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Planar PR6020 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Planar PR6020 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Planar PR6020 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Planar PR6020 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
