Gebruiksaanwijzing /service van het product 8-Port IP Power Manager IPM-8001 van de fabrikant Planet
Ga naar pagina of 57
8-Port IP Power Manager IPM-8001 IPM-8002 User’s Manual.
Copyright Copyright © 2006 by PLANET T echnology Corp. All rights reserved. No p art of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into .
Federal Communication Commissi on (FCC) Radiation Exposure Statement This equipment complies with FCC radiation exposure set forth for an uncontrolled environme nt.
TABLE OF CONTENTS CHAPTER 1 INTRODUCTION .............................................1 1.1 P ACKAGE C ONTENTS .............................................................................................................. 1 1.2 P RODUCT D ESCRIPTION .
CHAPTER 6 WEB CONFIGURA TION ..........................15 6.1 P OWER M ANAGEMENT ......................................................................................................... 16 6.1.1 Contr ol ..............................................
Chapter 1 Introduction Thank you for purchasing PLANET IP Power Manager . This manual guide s you on how to install and properly use th e IP Power Manager in order to take full advant age of its features.
z Upgrade utility for eas y firmware upgrade z Event notification through SNMP trap o r E-Mail alert s z Daily history report through E-mail z Supports SS L-3 and SSH V1 protocol z Administrator and m.
LED Function Description 1 Curre nt le vel indicator Display s the amount of current being drawn by the connected output device through the power outle t. 2 Outlet power indicat or Disp l a ys t he out- let power status . Off: Power of f Gr een: P ower on 3 Remote contr ol indicator Displays the remo te control s tatus of each out let.
LED Function Description INPUT Input power consumption indicator Display s the amount of current being drawn by the connected output device through the power outle t.
Name Function Description LAN Ethernet (LAN) port Enables you to connect IP Power Manag er to a LAN or WA N . Console Console port Enables you to config ure t h e IP Power Manager us in g the serial port. Or y ou can conne ct an op tional EMD to this port.
Chapter 2 Hardware Installation Before you proceed with the inst allation, it is necessary that you have enou gh information about the IP Power Manager . 2.1 Connecting Input Power The IP Power Manager h as an IEC C20 p ower inlet f or supp lying an d man agin g power fo r th e output device s.
2.3 Connecting Digital Outputs The IP Power Manager provid es two dig ital outputs (NO by default) to which you can connect in dicators or other o utput de vices that are normally open ( NO) or normally closed (N C). The digital output connectors are work as a switch to let you switch the connected device On or Off.
2.5 Connecting The Console Y ou can control the output devices and manage thei r power statu s through the cons ole por t with ser ia l co nnection. Use th e bundled serial cable to c onnect the COM port o f yo ur PC and the CONSOL E port of the IP Power Manager as shown.
- 9 - control th e IP Power Mana ger from your PC or laptop. When the network has installed a router, you can also use your mo bile phone or PDA that is w e b b ro ws er s u p po rt ed a n d connected to Internet to control IP Power Mana ge r .
Chapter 3 User Control Button Y ou can tu rn on po wer man ually fo r eac h of the eigh t out put devic es wi th the control buttons provided under each st atus ind ic ator A through H. Each but ton allows y ou to set the remote control function as well as turn power on/of f for each outlet manually .
Chapter 4 Quick Setup When you are first time configure your IP Power Manager . Y ou may refer to this chapter to know how to initial your IP Power Manager fastest. 1. Please insert User ’s Manual and Utility CD in to the CD-ROM drive to initiate the autorun program.
5. In default, IP Power Ma nager is DHCP client enables. If there is no DHCP server in your network. Please click “Set I P” button. Then enter an IP address th at in the same segm ent of your configuration PC. Please pre ss “OK”. 6. Please press “Browse” butt on, then you will see a dialog box asking you the user name and password.
- 4 -.
Chapter 5 Configure With Console The IP Power Manage r has provided a serial port that enables you to configure and control the system throu gh yo ur PC’ s RS-232 serial (C OM) p ort. Use the serial c able provided to connec t the console port to you r PC’ s COM port as de scr ib ed in “Co nnect in g th e cons ol e”.
4. The Pr operties wind ow o pe ns. Click” Restore Defa ult s” to use the def ault settings. Make sure that the Bit s per second field is set to 9600 . Click OK when done. - 6 - 5. Press any key . The I P Power Manager Configurati on Utility Main menu opens and you are prompted for a passwo rd.
6. After enter correct password, you will see the main menu of console interface . - 7 -.
5.2 IP Power Manager Configuration In this option. Y ou can setup the general settings of this IP Power Manager. 5.2.1 System Group In this option. Y ou can change the IP Powe r Manager IP settings, system date and time. Option Description IP Addres s The IP address of IP Power Manager is dotted format.
5.2.2 Control Group - 9 - Option Description Administrator User Name In default, the user name is “admin”. Y ou can change the user name to a simply memorize name. Administrator Password In default, the password i s “admin”. Please change the p assword to IP Power Manager in the first time configuration.
standard T elnet port (23). HTTP Co ntr ol Enable/Disable the HTTP connection with the IP Power Man ager . The user may configure HTTP protocol to use a port number other than standard HT T P port (80 ). SNMP Control Enable/Disable the SNMP connection with the IP Power Manager .
Power on Delay (Seconds) Set power on delay time in second s. The outlet will turn on af ter the delay time. Power off Delay (Seconds) Set power off delay time in seconds. The outlet will turn on after the delay time. Output Current Threshold (Amp) Set the upper limit of output current in Amp.
5.5 Trap Receiver Table This page li sts the p arameters for SN MP trap receivers (For SNM P Networ k Management). Option Description IP Addres s The IP Address in dotted format of the NMS station to which th e trap should be sent . Community S tring The co mmuni ty string of the trap PDU to be sent.
5.6 Reset Configuration To Default When you would like to reset IP Power Manger to default configuration, please select this option and press “y”. 5.7 Restart IP Power Manager After configuration, please select this option to make the ne w functi on works.
5.8 Exit Select this option to exit Hyper T erminal. - 14 -.
Chapter 6 Web Configuration The IP Power Manage r provides a graph ic us er i n t er f ace t h a t ca n be viewed from a web browser such as Inte rnet Explore r .
connecte d), System , Network and Logs . When you click the IP Power Manager front p anel on the Hom e screen. Y ou will see the device status as bel ow .
6.1.1.1 Inlet This page shows the associated st atus and even action of inlet. - 17 - Option Description Stat u s Input V oltage (V olt) The current input voltage i n V olt. Input Current (Amp) The current input current s in Amp. Input Frequency (Hz) The current input frequency in Hz.
Input V oltage Threshold Low (V olt) Low threshold of input volt age. When input voltage is lower than t his value, IP Power Ma nager will t ake a ction specified in the "Inlet Event s Action" table. Current Event of Inlet Shows the associated event description when there is an eve nt occurred.
Power Off Delay (Seconds) Set power off delay time in seconds. The outlet will turn of f after the delay time. Output Current Threshold (Amp) Set the upper limit of output current in Amp. Output Current Ov er Threshold T urn Power Off If selected, it will turn power of f of outlet when this event occurred.
T urn On / T urn Off button T urn digital outputs on or of f manually . 6.1.2 Schedule This page all ows user to add or remove the IP Power Manager' s schedule list dynamically . The maximum schedule is 32. When you would like to add a new schedule, pl ea se press “Add New”.
T ype" is "S pecial Schedule". Schedule Date (yyyy/mm/d d) Set the date of this schedule. Schedule Ti me (hh:mm) The time in 24-hour format means whe n the outlet should turn of f or turn on its out put power . Outlet s Action Set the outlet action to be on or off.
- 22 - Option Description Sensor Name Configure the name of a sensor (o r device) with up to 15 characters. Set Point The threshold of a sensor (T emperature or Humidity) will trigger an alarm, whenever the me asurement is over (hi gh) or under (low) t he set point.
EMD T emperature Unit Choose the displayed temperature unit to “Celsius” or “Fahrenheit”. 6.2.3 Alarm This page allows user to modify the parame ters associate d with the enviro nme nt events.
Option Description Configure System System Name This field allows the user to set the value in System name that is defined in MIB-II or to view the curr ent setting. Size is 31 characters. System Cont act This field allows the user t o set the value in System manager (System Contact ) that is defined in MIB-II or to view the current se tting.
Option Description Index This column provides a reference numb er for the existence u ser . User Name The user name which i s used to l og in t he IP Power Manager system. Password The password which is u s ed to log in the IP Power Manager system. Outlet Privilege The security level for each outlet.
6.3.3 Date & T ime This page prov ides the appropriate options below to enable the IP Power Manager date/time to be changed in dif ferent methods. It will show the current date and time of the IP Power Manager . This can be cha nged to synchroni ze with a comp uter , and enquiry from a time serv er (NTP) or manually .
6.3.4 T rap Receivers This page li st s the parameters for SNMP trap receivers (For SNMP Network Man agement). Option Description Index The index number of the entry in the tab le. NMS IP Address The IP Address in dotted format of the NMS station to which the trap should be sent .
6.3.6 WOL IP Pow er Manager has support WOL function to wake your PCs up. This function can help your servers work again after the power interruption. - 28 - Option Description Repeating Ti mes The times of WOL packet IP Power Ma nager will send . Interval T imer (Sec) The interval between send next WOL packet.
6.3.7 Email Notification This page is allowed when the security level is “Adm inistrator”. There are two group s in this page, one is “General Conf iguratio n” group and the other is “Email Re ceivers T ables”.
day in 24-hour format at which time you want the email sent. Email Receivers T ables Mail Account A s Administrator , you may enter the email address of the individual you wish to have the IP Power Manager send mail to. Description As Administrator , you may enter a description for reference purposes for each of the Mail Account you configure.
Option Description Screen T ext This is the description of link name which will display on the menu tree for user's reference. Link Address This field defines the real name of web page to be connected, in URL format. Stat u s There are two kinds of st atus, "E nabled", and "Disabled".
Option Description IP Address The IP addre ss of IP Power Manager is dotted form at. Default value is "192.168.1.1", and size is 15 characters. Gateway Address The IP address of the g ateway is dotted format. Default value is "0.0.0.0", and size is 15 characters.
T elnet Connection paramete r enabling or disabling the termin al to the server This is the application (T elnet) control process. (e. g. telnet 192.168.1.1). The user may configure the T elnet protocol to use a port number other than the stan dard T elnet port (23).
Available opti ons are: Permitted and Denied. Access T ype .5 Logs e fundament al IP Power Manager pa rameters. The nsolidation interval by modifying the varia ble "History Log y Y ou will see the history log list in thi s screen. Y ou may select one of them to check the log cted, it will also log the following information.
Option Description Date (dd/mm/yyyy ) This column show the dat e on which the recording was made. Time (hh:m m:ss) This gives the time in a 24-hour format when the values were recorded. Input Voltage This shows the input volt age in V o lts at the time of recording.
Option Description Date (dd/mm/yyyy ) This column show the dat e on which the recording was made. Time (hh:m m:ss) This gives the time in a 24-hour format when the values were recorded. Event Description 6.5.3 Clear and Save Log Dat a This screen allows you to clear or save t he log file.
Chapter 7 Utility IP Power Ma nager has prov ided a utility for customer to set the IP addre ss and upgrade. Y ou can find this utility in “Utility” folder of bundled CD. Buttons Description Device List This will show you all the IP Power manager in your network.
with the located firmware. Open Press this button to locate the firmware. Q - 38 - uit Close utility ..
Appendix A Error Code E r C od e rro Description E01 Network link down E02 Parameters checksum error E03 Input voltage o ver threshold high (V olt ) E04 Input voltage over threshold low (V olt) E05 Ou.
Appendix B Specification Model IP IPM-8002-EU IPM-8002-UK M-8001-US LAN 10 Port /100Mbp s, RJ-45 Console port RJ-45 connector x 1 COM por 1; For UPS conne t ction Digit al Output 2 pair AC 0~125V , 15.
Appendix C Glossary A cation Authentication refe ed message's integrity . D DHCP (Dyna mic Host Configuration Pro tocol) so f tware automatically assig ns IP addresses to client s loggin which eliminates the need to manually a ssign p D D r Do e at all machines on the net have.
network. Every client and serve r station must ha either a permanent addr ess or have one dyn s four sets of num bers separated by peri ods (for example, munications links such as the router .
- 43 - NMP h ardware or sof tware components tran smit network device activity the workstation used to oversee the network. er or router and is comp ared IP addre s s to determi ne whether to accept or reject the p acket. l Protocol) is the transport protocol in T CP/IP that ensures messages itted accurately and completely .
Een belangrijk punt na aankoop van elk apparaat Planet 8-Port IP Power Manager IPM-8001 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Planet 8-Port IP Power Manager IPM-8001 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Planet 8-Port IP Power Manager IPM-8001 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Planet 8-Port IP Power Manager IPM-8001 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Planet 8-Port IP Power Manager IPM-8001 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Planet 8-Port IP Power Manager IPM-8001 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Planet 8-Port IP Power Manager IPM-8001 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Planet 8-Port IP Power Manager IPM-8001 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
