Gebruiksaanwijzing /service van het product SoundStation 2W van de fabrikant Polycom
Ga naar pagina of 46
SoundStation 2W ™ User Guide and Administrator Guide USER GUIDE / ADMINISTRA T OR GUIDE.
SA VE THESE INSTRUCTIONS When using your telephone equipment, the follo wing safety precautions should alw ays be follo wed to reduce the risk of fire, electric shock, and injury to people. • Read and understand all instructions. • Follow all warnings and instructions marked on the equipment.
Thank Y ou ............................................. 5 Over view .............................................. 5 Par ts List ............................................... 6 Setting up SoundStation2W™ ................... 7 Features ...........
T roubleshooting ................................... 26 No Signal .............................................................................................. 26 No Dial T one .........................................................................
SoundStation2W™ User Guide - 5 Thank Y ou Thank you for choosing the Polycom SoundStation2W™. In this User Guide, you will find e verything you need to quickly set up, use, and man- age your ne w conference telephone.
SoundStation2W™ User Guide - 6 Par ts List The follo wing items are included in your SoundStation2W™ pack- age. Check this list before instal- lation to ensure that you ha ve re- cei ved each item. If you are missing any items, please contact your SoundStation2W™ reseller .
SoundStation2W™ User Guide - 7 Setting up SoundStation2W™ Ready State SoundStation2W™ will display a Ready message after successfully communicating with the base upon po wer up. The Ready message is also sho wn after a call is completed and the phone is a v ailable for the next call.
SoundStation2W™ User Guide - 8 Both the base station and the console can be wall mounted if desired. The base station can also be mounted under a table. The appropriate mounting scre w holes are provided on the back surfaces. The console can also be locked in place using a standard laptop security cable.
SoundStation2W™ User Guide - 9 Features LED Indicators Buttons Understanding the Display The LEDs located on the top of your SoundStation2W™ indicate the current status of your confer - ence telephone: Green - your call is in progress. Blinking green - a call is incoming.
SoundStation2W™ User Guide - 10 SoundStation2W™ comes in two dif ferent formats. The product uses either 2.4 GHz WDCT (W orldwide Digital Cordless T elecommunications) or 1.9 GHz DECT (Digital Enhanced Cordless T elecommunications) stan- dard technology .
SoundStation2W™ User Guide - 11 Mobile Phone Mode is an additional ne w mode of operation of fered by the SoundStation 2W™. This feature enables you to combine the con venience of a mo- bile phone with the acoustics of a confer - ence phone.
SoundStation2W™ User Guide - 12 Using SoundStation2W™ Direct Dial 1. T o obtain dial tone, press the ke y . 2. Dial the desired number . ► T o cancel the call, press the ke y . Indirect Dial 1. From the Ready screen, dial the desired number . 2.
SoundStation2W™ User Guide - 13 Ending a Call T o end a call, press the ke y . Call Hold When a call is on hold, you cannot hear your remote party , and they cannot hear you. ► T o place a call on hold, press the HOLD soft ke y . The LEDs on the top of your SoundStation2W™ will blink red.
SoundStation2W™ User Guide - 14 Speed Dial a Number Y ou can speed dial any entry in your Phone Book, in either of these ways: Speed Dial Number First 1. Enter the 1- or 2-digit Speed Dial number . 2. Press the Phone b utton or the SEND soft ke y . If a Speed Dial entry does not exist, a Not Assigned notice will appear .
Connection Diagram ► Y ou can also access the DIAL s oft ke y after selecting an entry with the Select button. 1. Choose the entry you want to dial. (See “Quick selection in a list” on page 17.) 2. Press the DIAL soft ke y . Y ou will see and hear the call being dialed.
SoundStation2W™ User Guide - 16 Ringer T ype Selection 1. Press the Menu b utton and choose Settings and press the Select b utton. 2. Cycle through the options using the Scrolling b uttons and choose Ringer T ype, and then press the Select b utton. 3.
SoundStation2W™ User Guide - 17 Language SoundStation2W™ allo ws you to select your preferred language for the phone to use when displaying information. T o change the language setting: 1. Press the Menu b utton and choose Settings. 2. Cycle through the options using the Scrolling b uttons and choose Language, and then press the Select b utton.
SoundStation2W™ User Guide - 18 Bridge Soft Key Y ou may program the telephone number of your preferred conferencing bridge vendor into the SoundStation2W™ so that it is immediately a v ailable. Programming the Bridge number 1. Press the Menu b utton, choose Bridge Setup using the Scrolling b uttons, and press the Select but- ton.
SoundStation2W™ User Guide - 19 Placing a call using the Bridge soft key Phone Book 1. Press the BRIDGE soft ke y . 2. The programmed number is auto- matically dialed and a call is placed to your preferred bridge vendor . Y ou can use the Phone Book to store a local directory of 25 contacts.
SoundStation2W™ User Guide - 20 Adding an entr y 1. Press the PH BOOK soft ke y and then the NEW soft ke y . 2. Enter information in the Name , Ph# (telephone number includ- ing any prefix es, such as 9 and/or 1), and Co (company) field using the alphanumeric ke ys on the dial pad.
SoundStation2W™ User Guide - 21 View System Information This feature displays the follo wing information about the SoundStation2W™: Location and Number , System Information, and Registration Information. W ith this feature you can easily identify the home room location for the phone.
SoundStation2W™ User Guide - 22 Standby Mode The phone has an automatic po wer sa ve function to extend battery operated usage. The product will switch into Standby within one minute of being in an idle inacti ve state. The console will not go into Standby if there is an acti ve call, e ven if there are pauses in the con versation.
SoundStation2W™ User Guide - 23 Charging SoundStation2W™ operates on a rechargeable lithium ion battery . The battery needs to be recharged peri- odically .
SoundStation2W™ User Guide - 24 Paging the Console Y ou can locate a misplaced console by using the paging feature. When paging, the console beeps. This will allo w you to locate the console. 1. Press the Page b utton on the base station to locate the SoundStation2W™ console.
SoundStation2W™ User Guide - 25 LCD Message Summar y The follo wing messages are displayed on the console LCD to represent v arious usage conditions. LCD Message What it means: What you will see: Ready Phone is in idle state and ready to make calls.
SoundStation2W™ User Guide - 26 No Signal “No Signal” is displayed when the console loses contact with the base. V erify the follo wing: T roubleshooting ► Check that the base station is po wered up. ► Make sure that the console is not out of the allo wed range (150 feet).
SoundStation2W™ User Guide - 27 Shor t Silences, Echoes, or Clipped Speech ► Do not mov e the SoundStation2W™ console while it is in use. ► K eep your hands aw ay from the console during calls.
Administrator Guide.
SoundStation2W™ Administrator Guide - 29 Location: 1 Location Name Enter a name for the SoundStation2W™’ s location, such as “Conference Room B”. 2 This Phone # Enter the SoundStation2W™’ s telephone number . Phone System: 1 Caller ID T urn Caller ID on or of f (if av ailable).
SoundStation2W™ Administrator Guide - 30 Assign a passcode: 1. Press the Menu b utton, choose Admin Setup using the Scrolling b uttons, and press the Select but- ton. Choose Passcode using the Scrolling b uttons, and press the Select b utton. 2. Press the ASSIGN soft ke y and enter a three-digit password.
SoundStation2W™ Administrator Guide - 31 Change the passcode: 1. From the Admin Setup menu, choose Passcode using the Scroll- ing b uttons and press the Select b utton. 2. Press the CHANGE soft ke y , enter the current passcode, and press the ENTER soft ke y .
SoundStation2W™ Administrator Guide - 32 2. Choose Location Name using the Scrolling b uttons, and press the Select b utton. Enter a location name using the dial pad. This name will be displayed when “Location Name and Number” submenu of “This Phone” menu is selected from the main menu.
SoundStation2W™ Administrator Guide - 33 Caller ID* Y ou can turn Caller ID on or of f. By default, Caller ID is on. *Caller ID is a subscription service. Chec k with your local telephone service pr ovider to de- termine if this service is available in your ar ea.
SoundStation2W™ Administrator Guide - 34 Flash Timing Y ou can adjust the timing of the Flash de- lay to 75, 100, 300, or 600 milliseconds. 1. Press the Menu b utton, choose Ad- min Setup and press the Select b ut- ton, enter the passcode (if required) and press the ENTER soft ke y .
SoundStation2W™ Administrator Guide - 35 MIC 1 MIC 3 MIC 2 MIC 4 MIC 5 Mic (Microphone) T est Y ou may test the SoundStation2W™’ s microphones to ensure that they are working optimally .
SoundStation2W™ Administrator Guide - 36 ► White Noise is a signal whose energy is distrib uted uni- formly among all frequencies within a band of interest, which for the SoundStation2W™ 3.
Specifications and W arranty Infor mation.
SoundStation2W™ Administrator Guide - 38 Limited W arranty Limited W arranty and Limitation of Liability Polycom warrants to the end user (“Cus- tomer”) that this product will be free from defects in workmanship and materials, under normal use and service, for one year from the date of purchase from Polycom or its authorized reseller .
SoundStation2W™ Administrator Guide - 39 W ARRANTY EXCLUSIVE. IF A POL YCOM PR ODUCT DOES NO T OPERA TE AS W ARRANTED ABO VE, CUSTOMER’S SOLE REMED Y FOR BREA CH OF THA T W ARRANTY SHALL BE REP AIR, REPLA CEMENT , OR REFUND OF THE PURCHASE PRICES P AID, A T POL YCOM’S OPTION.
SoundStation2W™ Administrator Guide - 40 This de vice complies with part 15 of the FCC Rules. Operation is subject to the follo wing two conditions: (1) This de vice may not cause harmful interference, and (2) This de vice must accept any inter - ference recei ved, including interfer - ence that may cause undesired operation.
SoundStation2W™ Administrator Guide - 41 A FCC compliant telephone cord and modular plug is provided with this equipment. This equipment is designed to be connected to the telephone network or premises wiring using a compatible modular jack that is Part 68 compliant.
SoundStation2W™ Administrator Guide - 42 may gi ve the telecommunications compan y cause to request the user to disconnect the equipment. Users should ensure for their o wn protection that the electrical ground connections of the po wer utility , telephone lines and internal metallic water pipe system, if present, are connected together .
SoundStation2W™ Administrator Guide - 43 Connection to party line service is subject to state tarif fs. (Contact the state public utility commission, public service commis- sion or corporate commission for informa- tion.
SoundStation2W™ Administrator Guide - 44 CE Mark R and TTE Directive This SoundStation2W has been marked with the CE mark. This mark indicates compliance with EEC Directi ves 89/336/ EEC, 73/23/EEC 1999/5/EC. A full copy of the Declaration of Conformity can be obtained from Polycom Ltd, 270 Bath Road, Slough, Berkshire, SL1 4DX, UK.
SoundStation2W™ Administrator Guide - 45 Installation Instructions Installation must be performed in accor- dance with all rele v ant national wiring rules. Plug Acts as Disconnect De- vice The socket outlet to which this apparatus is connected must be installed near the equipment and must always b readily accessible.
For information, contact your reseller or go to: www .polycom.com Polycom WW Headquarters: Polycom, Inc. Corporate Headquarters 4750 W illow Road Pleasanton, CA 94588 Polycom ® , SoundStation ® , and the Polycom logo design are registered trademarks of Polycom, Inc.
Een belangrijk punt na aankoop van elk apparaat Polycom SoundStation 2W (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Polycom SoundStation 2W heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Polycom SoundStation 2W vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Polycom SoundStation 2W leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Polycom SoundStation 2W krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Polycom SoundStation 2W bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Polycom SoundStation 2W kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Polycom SoundStation 2W . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
