Gebruiksaanwijzing /service van het product 253 Series van de fabrikant RCA
Ga naar pagina of 36
F or Systems: HT35713BD , HT60903BD , 253 Series, 802 Series & 852 Series User’s Guide C USTOM H OME T HE A TR E TM.
i ¥ If your Custom Home Theatre system was built into a wall, it should have been installed in accordance with the appropriate building and electrical codes. For extra precaution, a system disconnect switch may have been added. This switch is intended to be used in an emergency situation to shut down all electrical power to the system components.
Important Information Introduction, Safety Precautions, Product Information __________________________ i Setting Up Your TV To Autoprogram TVÕs Channel Memory ______________________________________ 2.
2 T o Add and Er ase Channels from TV’ s Memor y 1. To add or erase a channel, repeatedly press TV MENU to highlight Setup Menu , and then press + or – to display the setup functions. Repeatedly press TV MENU to highlight the Chan Mem function. 2.
8:27 S-VIDEO 90 Antenna: A Cable/Air: Cable VCR 1 Chan: 91 VCR 2 Chan: 92 Cable Chan: 90 3 4. Press + to enter channel 91 for VCR1 Chan . ¥Laserdisc player: Repeat the above steps, substituting VCR2 Chan and pressing 9, then 2, for channel 92. Then press + to enter the channel.
4 T o Set the Cloc k 1. Repeatedly press TV MENU on the remote to highlight Setup Menu . Press the + or – button to display the setup functions. Repeatedly press TV MENU to highlight Clock Set . Mute Video Menu Audio Menu Setup Menu 8:27 13 Cable/Air: Air VCR1 Chan: 91 VCR2 Chan: 92 Cable Chan: 90 Clock Set: -Hr+Min 2.
5 T o Use Pictur e-In-Picture (PIP) 1. Press TV and select the TV channel you want to watch. 2. Press PIP on the remote. A small picture will appear on the TV screen. The small and large picture will be the same. 3. Press the VCR1 ,o r VCR2•LD , or DSS•CABLE button on the remote to see the picture from that component in the small PIP window.
6 All of the basic features of each of the systemÕs components can be controlled with the system remote control (CRK67A1). Unless otherwise noted, all remote control references in this guide will be referring to the system remote control.
7 Using Y our System Remote Control Univ ersal Remote Control Your RCA Universal Remote Control is capable of operating most RCA audio and video equipment. To use the remote control effectively, always aim it directly at your receiver. The remote control operates on four batteries, included with your system.
8 Using Y our System Remote Control (Continued) + and - Used with the MENU button to select or adjust a function. ANTENNA Changes the antenna input between ANT A and ANT B. CHAN ( Channel ) Up or Down Selects next higher or lower channel in the TVÕs channel memory.
9 Buttons Audio/Video Receiver Function Press the AM•FM button to turn on the receiver and set the remote to operate the receiver. + and – Used with REAR•CTR LEVEL button to adjust volume level of center and rear speakers. AM•FM Turns on the receiver and toggles between AM and FM bands.
10 ANTENNA Turns the VCR indicator on and off in the VCRÕs display panel. This has no effect when using this system. Arrow Buttons (MOVE ) Allow you to move through the menus when they are displayed . CHAN (Channel) UP or DOWN Selects next higher or lower channel in the VCRÕs channel memory.
11 ANTENNA Toggles between analog and digital audio on laser discs. CHAN (Channel) UP or DOWN Selects next or previous track on laserdisc. Skips to next step during program playback. CLEAR Clears an entry during programming. DISPLAY Repeatedly press to show information about the disc that is playing.
12 RCA DSS ® Receiver Controls ANTENNA Toggles between antenna input and RCA DSS ¨ input. CLEAR Removes all menus and guides from the screen. CHAN (Channel) UP or DOWN Tunes to the next or previous channel when watching TV through the RCA DSS ¨ System.
13 Pr ogr amming Y our Remote You can program the universal remote to control most brands of remote controllable TVs, VCRs and cable boxes. If you have an RCA, GE or ProScan component, you may not need to program the remote at all. Other manufacturersÕ brands will need to be programmed.
14 Remote Control Codes Programming Y our Remote Audio Equipment Brand Code(s) ads: AMP ...............001 Aiwa: CD .................060 Akai: AMP ........002,008 Denon: CD .................057 Dynamic Bass: AM/FM ...........029 CD .................025 TAPE .
15 Remote Control Codes (Continued) Admiral ......................................005 Amtron .......................................064 Akai .....................................002,103 A-Mark .......................................102 Anam ..........
16 The audio/video receiver tunes in the signals for AM and FM radio stations in your area, and controls the sound output for the TV, VCR, laserdisc Player, CD changer, and satellite receiver (optional for some systems). T o Listen to AM/FM Stations 1 .
17 T o Set Surr ound Modes for Each Input 1. Press the Input you want to set the surround mode for. ( TV, VCR1, VCR2•LD, DSS, etc.) 2. Set the surround mode by repeatedly pressing the SURROUND button on the remote or the SURROUND MODE button on the receiver until the surround mode you want is selected.
18 T o A uto-Searc h Channels for the VCR’ s Channel Memory If you do not use the Interactive Guide follow the directions below to place only the active channels in the VCRÕs channel memory.
19 T o Set the Cloc k When you first turn on the VCR, --:-- appears in the clock area of the VCRÕs display panel. The clock must be set before you can use the VCR for express (XPR), VCR Plus+, or timer recordings.
20 T o Pla y Back a V ideotape 1. Press VCR1 on the remote to turn on the VCR, audio/video receiver, TV, and tune the TV to channel 91 (Input 1). This also sets the remote to control the VCR. 2. Insert a pre-recorded tape in the VCR. The VCR automatically turns on, and the cassette-in indicator lights.
21 Recording Time Cassette SP LP SLP T-120 2Hrs 4Hrs 6Hrs T-160 2Hrs 40Mins 5Hrs 20Mins 8Hrs T o Recor d a Progr am 1. Insert a blank tape with safety tab in place. 2. Press VCR1 on the remote to turn on the VCR, audio/video receiver, TV, and tune the TV to channel 91 (Input 1).
22 RECORD LENGTH 0:00 CH 04 Press REC to set length Express Display on TV Screen Press Recording REC Time 0:30 ( 30 Min) 1:00 (1 Hr) 1:30 (1 Hr, 30 Min) 2:00 (2 Hrs) 3:00 (3 Hrs) 4:00 (4 Hrs) 0:00 (XPR Turns Off) Express Recor ding (XPR) Express recording lets you record up to four hours without using the timer program feature.
23 Recor ding W hile Y ou’ r e A w ay Timer and VCR Plus+ recordings let you program the VCR to record up to eight different programs within a one-year period. Before recording, make sure that: ¥ The clock is set correctly. ¥ A tape with safety tab has been inserted with enough tape to record the program(s).
24 VCR PLUS+* Recor ding Make sure the VCR has been set up for VCR Plus+ programming. See VCRÕs UserÕs Guide. 1. Press VCR1 on the remote to turn on the VCR, audio/video receiver, TV, and tune the TV to channel 91 (Input 1). This also sets the remote to control the VCR.
25 Checking or Clearing a VCR Plus+ or T imer Recording 1. Press VCR1 on the remote to turn on the VCR, audio/video receiver, TV, and tune the TV to channel 91 (Input 1). This also sets the remote to control the VCR. 2 . Press MENU PROGRAM on remote to display VCR MAIN MENU on TV screen.
26 If your system came with, or you have added, an RCA Digital Satellite System, you can press the DSS•CABLE on the remote and the DSS ¨ receiver, audio/video receiver, and TV will turn on and the TV will tune to channel 90 (S-Video Input). For more detailed instructions see the satellite receiver userÕs manual.
27 Using Y our DSS ® Receiver Program Guide 122 123 124 125 126 Movies Sports Other All Exit 3 Channel 7:30PM 8:00PM 8:30PM 9:00PM 9:30PM Other F eatures A v ailable T hrough the Menu System The menu system offers you access to many more features. Some of the major features are: ¥ Select pay-per-view programs and coming attractions.
28 T o Pla y a Disc 1. Press VCR2•LD on the remote to turn on the laserdisc player, audio/video receiver, TV, and tune the TV to channel 92. This also sets the remote to operate the laserdisc player. 2. Press OPEN•CLOSE on the player to open the disc table.
29 For complete operating information about your CD changer, see the CD changerÕs UserÕs Guide. T o Pla y a CD 1. Press CD on the remote to turn on the CD changer and audio/video receiver. This also sets the remote to operate the CD changer. 2 . Press OPEN/CLOSE on the CD changer to open disc tray.
30 T o T est the Speaker System 1 . To make sure all speakers are activated, your receiver must be in the Pro Logic or CINEMA mode. 2 . Press the TEST button on the receiver.
31 T roubleshooting Checks T r ouble No Power Here’ s What to T r y ¥ Make sure all components are plugged in as instructed in the Installation & Hookup Guide. ¥ Check circuit breaker for the wall outlet. ¥ If a disconnect switch was added to the system, but sure it is in the ON position.
32 T roubleshooting Checks No Video from VCR or laserdisc player ¥ Make sure TV is in the correct input. If the TV does not go to the correct input when the VCR1, VCR2•LD, or DSS•CABLE button on the remote are pressed, refer to the Test the System section of the Installation and Hookup Guide for proper programming of the components.
Add Channel, TVÕs Channel Memory . . . . . .2 Add Channel, VCRÕs Channel Memory . . .19 AM/FM Stations Listen to . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Audio, Adust .
C USTOM H OME T HE A TRE TM ©1995 Thomson Consumer Electronics, Inc. Printed in USA Trademark(s) ® Registered Marca(s) Registrada(s) TOCOM 15099470 10330 North Meridian Street, Indianapolis, IN 4629.
Een belangrijk punt na aankoop van elk apparaat RCA 253 Series (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen RCA 253 Series heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens RCA 253 Series vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding RCA 253 Series leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over RCA 253 Series krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van RCA 253 Series bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de RCA 253 Series kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met RCA 253 Series . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
