Gebruiksaanwijzing /service van het product R8C/17 van de fabrikant Renesas
Ga naar pagina of 28
REJ10J0746-01 10 RENESAS SINGLE-CHIP MICROCOMPUTER M16C FAMILY / R8C/Tiny SERIES Rev .1.10 Renesas Solutions Corp. Revision date : Mar 01, 2005 www .renesas.
1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corporation product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corporation or a third party.
3 T able of Content s 1. accessory softwares to inst all 2. Until a sample program is operated with an emulator software P4 2.1 Flash programmer (Flash developm ent toolkit) Inst allation P4 2.2 Emulator Sof tware, C Compile r and High-performance Embedded Workshop Inst allations P10 2.
4 1. accessory softwares to install 1) Note the following point s before installing. a) The M3T -NC8C has already been installe d. b) The M3T -NC30WA has already been installed. c) The emulat or software h as already been installed. Install the sof tware attached to this product after uninst alling the above soft ware.
5 Click “OK”. Click “Next” Select language to be used and click "Ne xt".
6 Only when you agree w ith License Agreement , click "Y es". Click “Next”. Click “Next”..
7 Remove a check. Clic k “Next” Click “Next”. Refer to a new folder name, or select from the existing folder li st and Cli ck “Next”..
8 Refer to a new folder name, or select from the existing folder li st and Cli ck “Next”. Click “Next”. Click “Install”..
9 Click “finish”..
10 2.2 Emulator Sof tware, C Compiler and High-performance Embedded W orkshop Inst allations 1) Installation Double-click an inst aller of CD-ROM ¥ dlp_tool ¥. 2) Installation procedu res are described below . Select the language to be used and cli c k “Next”.
11 Only when you agree w ith License Agreement , click "Y es". Select all and click “Next” Refer to a new folder name, or select from the existing folder list and cli c k “Next”.
12 Refer to a new folder name, or select from the existing folder list and cli c k “Next”. Click “Y es” Check the setting before starting the inst allati on and if the setting is correct, click “Next”.
13 Check the setting before st arting the installation and if the setting is correct, click “Next”. Then, a copy will be started. Click “Finish”.
14 2.3 USB driver inst allation Connect the E8 emulator using the US B cable to the USB port of host ma chine. <Windows XP> Installation proce dures a re described below . If the E8 emulator is connected, it is recogni zed a s a new hardware. Click “Next” after sel ecting “Ins tall the sof tware automatically”.
15 Renesas USB drivers are not authenticated by Mi crosoft, but we provide them based on the sufficient examination. Insert CD-ROM and specif y ¥dlp_tool¥ DRIVERS¥USB¥XP¥.
16 <Windows 98/ME> Installation proce dures a re described below . If E8 emulator is connected, it is recognized as a ne w hard ware. Click “Next” and sta rt inst alling a driver . Put a check into “search for the be st driver for your device” and click “Next”.
17 Click “Next”. Click “Finish”. The installation is complet ed above..
18 2.4 Operate Sample Program 1) Copy ¥Jap anese¥M3A01 15_17¥PROGRAM¥ in CD-ROM to the given folder . 2) Change a file attribute Since the copied file attribute is set to “read-only”, cha nge it to the attribute which can be re ad or written .
19 Click “OK”. The installation is complet ed above..
20 <Windows 98/ME> Select all files in the copied folder by a mouse. Select “File” and “Property”. Remove a check of “Read-only” and click “Apply”.
21 Click “Close”. Perform this setting to files in all folders of “3min_timer” and “ad _on kai”. The installation is complet ed above..
22 3) Connect a t arget b oard Use a user cable to the E8 emulator and connect a t arget bo ard. Perform the below setting for the ju mper setting of a t arget board.
23 4) Compile a sample program The example of the musical scal e pro gram (ad_onkai.hws) is sho w n belo w . (1) S tart High-performance Embedded Workshop Select “program” of st art menu - “Renesas” - “High-perform ance Embedded Workshop” - “High-performance Embedded W orkshop” and click.
24 (4) Select “R5F21 174” for Device and put a check i nto “Download emulator firmware” for Mo de. Click “OK”. (5) When 5V power supply is perfo rmed from E8, put a check into “Powe r supply is carried out ”. Select 5.0V and click “OK”.
25 (3) Execute Click “Debug” - “Ex ecute ”. (4) If clicking “Debug” - “S top a prog ram”, a program will stop. When executing t he program again, click “Debug” - “Execute ”. <Musical Scale Program> When a program execution st art s, LED1(red) lights up.
REVISION HISTORY Description Rev . Date Page Summary 0.10 2004.08.18 - First edition issued 1.00 2005.02.01 - It changed from FDTlight to flash programmer (Flash Developm ent Toolkit).
R8C/15, R8C/17 StarterKit Tu t o r ia l Publication Date Rev.1.10 Mar 01, 2005 Published by: Renesas Solutions Corp. 4-1-6, Miyahara, Yodogawa-ku, Osaka City, 532-0003, Japa n ©2005 Rene sas Te chno logy Cor p. an d Rene sas Solu tion s Corp., Al l Righ ts Reser ved.
Renesas Solutions Cor p. 4-1-6, Miyahara, Y odoga wa -ku, Osaka City , 532-0003, Japan R8C/15, R8C/17 S tarterKit Tu t o r i a l.
Een belangrijk punt na aankoop van elk apparaat Renesas R8C/17 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Renesas R8C/17 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Renesas R8C/17 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Renesas R8C/17 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Renesas R8C/17 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Renesas R8C/17 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Renesas R8C/17 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Renesas R8C/17 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
