Gebruiksaanwijzing /service van het product Rocport ID 3 van de fabrikant Rocstor
Ga naar pagina of 47
1 store your future ROCPORT ID3 User Manual.
Page | 2 ROCSTOR | ROCPORT ID 3 user manual TABLE OF CONTENTS IMPORTANT NOTICES 4 • Safety Notices ________________________________________________________ 4 • General Notices • Capacity Disclai.
Page | 3 ROCSTOR | ROCPORT ID 3 user manual TROUBLESHOOTING 30 • Troubleshooting for Macintosh computers _________________________________ 30 • Troubleshooting for PC Windows based computers 32 KN.
Page | 4 ROCSTOR | ROCPORT ID 3 user manual Safety Notices • The warranty is void if an unauthorized person attempts and/or repairs the hard d isk drive. • Read all Manuals and instructions carefully before u sing the device. • Do not spill any liquid or insert any object into the device.
Page | 5 ROCSTOR | ROCPORT ID 3 user manual • Do not attempt to disassemble and service the Rocport ID drive during the warranty period. • Please read the Safety Notices and Limited Warranty information in this Manual and on the Rocstor website ( www.
Page | 6 ROCSTOR | ROCPORT ID 3 user manual Introduction ROCPORT ID 3 – USB (1.1/2.0) Rocport ID pocket drives deliver outstanding performance and reliability in multiple colors. Designed and engineered in the U.S.A. to meet the needs of the demanding mobile data storage market, the ROCPORT ID 2.
Page | 7 ROCSTOR | ROCPORT ID 3 user manual Minimum System Re quirements: Mac Users: Window Users: Connectors • USB 2.0 port x1 Hardware: USB (1.1 or 2.0) port(s.) Operating Systems: Microsoft Windows 2000, Me, XP, Vista, Windows 7 Recommended memory: 512 MB RAM Hardware: USB (1.
Page | 8 ROCSTOR | ROCPORT ID 3 user manual QUICK INSTALL ATION How to Connect the Interface Cables - Co nnecting the Drive 1. Turn ON your computer and wait until it fully boots up to load all programs.
ROCSTOR | ROCPORT ID 3 user manual Cable Types: USB supports three data transfer rates: • USB 2.0: A Hi-Speed (USB 2.0) rate of 480 • USB 1.1: A Full Speed rate of • USB 1.0: A Low Speed rate of 1.5 user manual USB supports three data transfer rates: (USB 2.
Page | 10 ROCSTOR | ROCPORT ID 3 user manual Installing Your D rive All Rocstor hard drives are formatted as blank FAT32 (32-bit file allocation table) volumes {unless otherwise stated on the box} that are compatible with most modern Windows and Macintosh operating systems.
Page | 11 ROCSTOR | ROCPORT ID 3 user manual Reformatting You r Drive As mentioned previously, all Rocstor hard drives are formatted as blank FAT32 volumes {unless otherwise stated on the box} that are compatible with most modern Windows and Macintosh operating systems.
Page | 12 ROCSTOR | ROCPORT ID 3 user manual PARTITIONING AND F ORMATTING T HE ROCPORT ID DRIVE ON A MAC OS All Rocstor drives are factory formatted with FAT32, unless otherwise stated on the retail box. WARNING: Formatting and Partitioning the Rocport Drive will destroy all of its data.
ROCSTOR | ROCPORT ID 3 user manual INSTRUCTIO NS FOR PARTITIONING AND 1. Connect the Rocstor drive to the 2. The drive will appear as an icon on the De sktop on the middle ri ght side. The icon will represent the method of connection (USB Note: If the Hard Drive is connected via USB port, the desktop would indicate the USB “Macintosh HD” icon.
ROCSTOR | ROCPORT ID 3 user manual 3. Once the icon appears on the 4. In the “Macinto sh HD” menu, click on the “App lications” icon. user manual Once the icon appears on the “Desktop” click on the “Macintosh HD” icon. In the “Macinto sh HD” menu, click on the “App lications” icon.
ROCSTOR | ROCPORT ID 3 user manual 5. If you are usin g Tiger, click on Option s on the lower cente r of the window. Se lect the Partition Sche me for your Rocstor drive. Su ggest you select “Apple P artition Map” click OK. user manual If you are usin g Tiger, click on Option s on the lower cente r of the window.
ROCSTOR | ROCPORT ID 3 user manual 6. Volume Inform ation: select a name for you r drive. 7. Format: Click o n either the “Format” area or the Blue up/ down arrows. Select Mac OS extended (jou rnal). user manual Volume Inform ation: select a name for you r drive.
ROCSTOR | ROCPORT ID 3 user manual 8. After selectin g the type of format, screen. On the next screen, user manual After selectin g the type of format, click the “Partition ” tab in the lower right of the screen. On the next screen, “Partition Disk” , click “Partition” again .
ROCSTOR | ROCPORT ID 3 user manual 9. The drive will begin to format and upon com pletion; the sam e icon that first appea red on the Desktop will reappear wit h your designed name on the Desktop.
Page | 19 ROCSTOR | ROCPORT ID 3 user manual PARTITIONING AND FORMATTING THE ROCPORT ID DRIVE ON WINDOWS 2000, XP AND VISTA All Rocstor drives are factory formatted with FAT32, unless otherwise stated on the retail box. WARNING: Formatting and Partitioning the Rocport Drive will destroy all of its data.
Page | 20 ROCSTOR | ROCPORT ID 3 user manual DIFFERENT WAYS TO GET TO THE CONTROL PANEL: (You may use any one of the following methods) 1. If the icon “My Computer” shows on your desktop, click or double click on the icon. Under “Other Places” click on “Control Panel.
Page | 21 ROCSTOR | ROCPORT ID 3 user manual 3. If the icon “My Computer” does not show on your desktop, click on the Start icon on the lower left of your screen. If the Control Panel link is not displayed, click on the Settings link and then click on the Control Panel link.
Page | 22 ROCSTOR | ROCPORT ID 3 user manual INSTRUCTIONS U PON REACHING CONTR OL PANEL: a. A fter reaching the Control Panel, click on Administrative Tools. b. After reaching Administrative Tools, click on Computer Management. c. After reaching Computer Management, click on Disk Management .
Page | 23 ROCSTOR | ROCPORT ID 3 user manual INSTRUCTIONS FOR PARTITIONING AND FORMATTING FROM FAT32 to NTFS : 1. In the “Disk Management” window, right click the Rocstor drive in the upper portion of the menu to highlight it. In the drop down menu, select “Delete Partition.
Page | 24 ROCSTOR | ROCPORT ID 3 user manual 4. Th e Rocstor drive will show up in the lower menu as an “Unallocated” disk. 5. Right click anywhere in the “Unallocated” disk area in the lower menu. 6. Click on “New Partition.” 7. Yo u are taken to “Welcome to the New Partition Wizard.
Page | 25 ROCSTOR | ROCPORT ID 3 user manual 8. Click on “Primary partition” (it should be selected as the default partition). Click “Next”..
Page | 26 ROCSTOR | ROCPORT ID 3 user manual 9. Un der “Specify Partition Size,” click Next to accept the default setting, which is the maximum size allowed.
Page | 27 ROCSTOR | ROCPORT ID 3 user manual 10. Under “Assign Drive Letter or Path,” accept the default letter and click “Next”. 11. In the “Format Partition,” accept the default setting.
Page | 28 ROCSTOR | ROCPORT ID 3 user manual 12. The “Volume label” can be ch anged to any name up to 11 characters. 13. Suggest that “Quick Format” be selected and then click “N ext”. 14. You now reached the “Completing the New Partition Wizard” screen.
Page | 29 ROCSTOR | ROCPORT ID 3 user manual 15. You will return automatically to the “Disk Management” window and will see the newly formatted Rocstor disk on the screen with the name you selected. If no new name was entered in the “Volume label,” the Rocstor drive will show up as “New Volume.
Page | 30 ROCSTOR | ROCPORT ID 3 user manual Troubleshooting Rocstor data storage products are subjected to several quality control tests before leaving our factory. However, from time to time, the product may not work after shipment or would experience intermittent problems under certain criteria and/or situations.
Page | 31 ROCSTOR | ROCPORT ID 3 user manual • Have you checked to confirm that the computer’s operating system works with the file system? • Review the manual that came with your computer to ensure that the file system is compatible with the operating system.
Page | 32 ROCSTOR | ROCPORT ID 3 user manual Troubleshooting for PC WINDOWS based computers Problem: The computer does not appear to recognize the drive Solutions: • A window should appear, notifying you that a device is connected and/or the Rocport HD icon should appear on the “My Computer” folder.
Page | 33 ROCSTOR | ROCPORT ID 3 user manual Solution: • USB ports come in different speeds from 12Mbits/ s to 480Mbits/s. USB 2.0 is a High-Speed connection. If the Rocport HD is connected to a USB 1.1 port (low speed) or hub, the drive will work slower than if connected to a USB 2.
Page | 34 ROCSTOR | ROCPORT ID 3 user manual K K N N O O W W L L E E D D G G E E B B A A S S E E Rocport ID3 Unique Features Special Features: • Pocket size external storage drive • Incorporates SATA Hard Drive • Contains USB 2.
ROCSTOR | ROCPORT ID 3 user manual Int roductions: Interfaces (ports) and FireWire is Apple Inc.’s brand nam e interface (alth ough the 1394 standa rd also defines a backplane inter face). FireWire is also known as (Sony’s nam e) and DV ( Panasonic’s confused with DV camcorder tapes).
ROCSTOR | ROCPORT ID 3 user manual FireWire 800 (IEEE 1394b) 9- pin FireWire 800/3200 (IEEE 1394b) conne ctor was introduced commercially by Apple in 2003. This newer 1394 specification (1394 b ) and correspondin g products 786.432 Mbit/s fu ll-duplex via a new en coding scheme termed beta mode.
ROCSTOR | ROCPORT ID 3 user manual U niversal S eri al B us ( USB ) is a serial bus st andard to interface designed to allow peripherals to be connected using a single standardized interface so cket a.
Page | 38 ROCSTOR | ROCPORT ID 3 user manual Compassion Chart: Raw Bandwidth Transfer Speed (Mbits/s) (Mbits/s) Max. Cable Length Feet (meters) Power Provided Device per channel SAS 3000 375 26 Ft (8 m) No 4 eSATA 3000 375 6.5 Ft (2 m) No 1 (15 W/ port mult iplier) SATA 300 3000 375 3.
Page | 39 ROCSTOR | ROCPORT ID 3 user manual Introductions: Form atting File Allocation Table ( FAT ) FAT is a file system developed by Microsoft for MS-D OS and is the primary file system for consumer versions of Microsoft Windows.
Page | 40 ROCSTOR | ROCPORT ID 3 user manual HFS Plus or HFS+ This is a file system developed by Apple Inc. to replace their Hierarchical File System (HFS) as the primary file system used in Macintosh computers (or other systems running Mac OS). It is also one of the formats used by the iPod digital music pla yer.
Page | 41 ROCSTOR | ROCPORT ID 3 user manual LIMITED WARRANTY This Limited Warrant y is provided by Rocs torage, Inc. (hereinafter : Rocstor) f or all lines of product s.
Page | 42 ROCSTOR | ROCPORT ID 3 user manual YOU SHOULD M AKE PERIODIC BACKUP COPIE S OF THE DATA ST ORED ON YOUR HARD DRIV E OR OTHER STORAGE DEVICES A S A PREC AUTION AGAINST POSSIBLE F AILURES, ALTER ATION, OR LOSS O F THE DATA.
Page | 43 ROCSTOR | ROCPORT ID 3 user manual MALFUNCTION IN CON DITION S OF NORMAL USE . ROCSTOR IS NOT LIABIL E FOR ANY DAMAGE TO ANY OTHER PRODUCT CONN ECTED TO A ROCST OR PRODUCT.
Page | 44 ROCSTOR | ROCPORT ID 3 user manual Where available, t he Rocstor Replaceab le Parts pro gram ship s approved replac ement part s directly to yo u to fulfill your warrant y. This will save c onsiderable repair t ime. After you call t he Rocstor Technical Suppo rt Center at 888.
Page | 45 ROCSTOR | ROCPORT ID 3 user manual “Rocstor” makes no representa tion or warran ty as to t he suitability or fitness of these devices for any specifi c application. Technical Support All Rocstor hard d rives are back ed by free teleph one techni cal support for t wo (2) years fr om the date of p urchase.
Page | 46 ROCSTOR | ROCPORT ID 3 user manual Contact Information Corporate Headq uarters 8130 Remmet Avenu e Canoga Park, CA 9 1304-4129 Office: +1 (818) 44 9-2000 Fax: +1 (818) 884- 8777 Email: info@Rocstor .
Page | 47 ROCSTOR | ROCPORT ID 3 user manual Rocport ID 3 is available in 8 velvet colors Thank you for purchasing Rocport ID. Rocstor Ver .0426I.
Een belangrijk punt na aankoop van elk apparaat Rocstor Rocport ID 3 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Rocstor Rocport ID 3 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Rocstor Rocport ID 3 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Rocstor Rocport ID 3 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Rocstor Rocport ID 3 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Rocstor Rocport ID 3 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Rocstor Rocport ID 3 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Rocstor Rocport ID 3 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
